Reset my Nokia to the factory via my computer settings

Similar Questions

• Cannot reset windows 8 for the factory settings and get an error 0xc000000f, after system startup.

  * Original title: I can't seem to be able to refresh, reset or reinstall my windows 8

  I have a laptop Asus s200e

  I would I have tried to reset my windows 8 to the factory settings and the thing is he always tells me that I have missing files and I need the installation disc. That is, that I don't have an installation disc because it is preinstalled and I tried to start up and I got an error 0xc000000f.

  Please help me

  Hello

  Thanks for posting the query on Microsoft Community.

  Am sorry to know that you are unable to boot the system, and you get an error: 0xc000000f.

  This error can occur if some files are corrupted, or if you have made changes to your computer.

  Did you change to your system, the hardware and/or software, before this problem?

  You can try to restore the computer configuration by clicking on the link below.

  Windows 8-How do I restore the system to the factory default settings, if I can't get into the system?
  http://www.ASUS.com/support/FAQ/1008226/

  Note: If you reset the computer to factory settings, it will remove all applications, programs and drivers that you have installed. If you need to reinstall all applications and programs, once you reboot the system.

  If you still have the same problem, you must contact the Asus technical support. Here is the link: http://support.asus.com/ContactUs.aspx?SLanguage=en

  I hope this helps. If you still have problems with windows know please let us.

• How can I get my vista reset and return to the factory settings?

  How can I get my vista back to factory settings

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Restore to the factory via HP Support Assistant settings?

  I restore my laptop HP G62-b33EE to the original because of some problems with OS settings.

  It was delivered with Windows 7 Home Basic Edition but I upgraded to Ultimate and now I want to restore it since its performance is much reduced. What should I know before moving outside the create a backup? He'll ask the basic Windows 7 Home Edition key? And my key labeled on sticker will work? Please help me because I have only a limited time!

  If the "HP Recovery" partition is always good, all you have to do is to start recovery from Windows using the Manager HP recovery or start of the screen by pressing 'F11' immediately after you turn on the computer and once per second thereafter, until the 'HP factory recovery"appears.

• Satellite L650 - 12K - restore the factory with Windows password settings?

  Hello

  Today I received my new Toshiba Satellite L650 - 12K. I went through the process of "first use" and put in place my name of user and password Windows 7 etc.

  However, after a reboot, when I tried to enter my password to connect to Windows, it says it is incorrect. I tried different combinations of password I used (I know what it's like I wrote it down at the time)-ive tried caps, plugs etc but nothing works.

  If I order the Toshiba recovery disks I will be able to return the laptop to factory settings and start the installation again, including Windows?.

  PS - I only put an account so can't even connect you as another user.

  Thanks for your time and your help.

  Gary2802.

  Hey Buddy,

  Yes, the Toshiba recovery disc can restore the initial configuration (on the box settings) even you don t know the password because it will remove the whole HARD disk and restore the version preinstalled Windows from Toshiba.

  So don t you worry about this, Toshiba Recovery disk will help you! ;)

• After repairing my Dell Inspiron to the factory setting, my computer restart, it never starts in windows, it gives me the option to press F2 (settings) or F12 (Boot Menu), are of no assistance.

  It recharges without loading Windows

  It recharges without loading Windows

  Hey MichaelD1953

  If you have problems after using the dells vista recovery relocation contact reference dell for assistance in their recovery process

  http://support.Dell.com/

  Walter, the time zone traveller

• DCC - cannot update the BIOS via command line settings

  I'm script an automated installation of Bitlocker on Windows 7 and 8.1 systems (company).  I use the last DCC and programs CCTK that came with it.  Systems have the latest BIOS updates, and are fully patched.

  I managed with several test systems (Win7, desktop computers, laptop computers (different models)).  I tried my scripts this morning on a laptop computer Win8.1 (Dell E6330) and as soon as my script runs to the addition of the password of the BIOS needed to make TPM changes ("cctk - setuppwd =" "") I get the following error:

  The required BIOS interfaces is not found on this system.

  I get the same error when running any other command CCTK used in my script:
  CCTK - tpm =-valsetuppwd =
  Activate CCTK - tpmactivation = - valsetuppwd =

  When I restart in the BIOS, no password has been set (all parameters are say no 'set') and the secure platform module is inactive.

  I updated to the latest BIOS (A14) and I get the above error message.  I know that orders CCTK I have scripted are correct, because they work on other systems.

  I wonder what could be the problem with this notebook and how I can come up with a solution.

  Thoughts?  Suggestions?

  Thank you!

  -Greg

  Just a quick update to let everyone know how I solved this:

  I had to install HAPI.

  On all other facilities that I have tested, just have the HAPI subfolder in the folder where CCTK. EXE was hosted was sufficient for work.  But for some reason some, in this case, once I installed HAPI and then ran my scripts again, they finished without a problem.

  I hope this helps someone else.  Seemed to be a solution simply absurd, but it is what it is.

• Cannot install my hp l7590 printer my printer connected to the network via another computer

  I have win 7 computer and the printer attached to the xp computer

  When I click on add a printer, I can see the printer but when I try to install it

  Windows says it can't find the driver in the network after watching it in windows update

  I tried to find it manually in the directory of the software for the printer hp, but I don't know which

  Using INF file

  If anyone can help me

  I will appriceciate it.

  in amir thanks

  Hi amir40,

  You have a more intermittent connection if you connect the printer to your router and then install the printer on computers using the network. Here is a document on how to connect the printer to your router.

  http://support.HP.com/us-en/document/c02279915

  If you want to continue with the print share. See the following document below.

  http://search.Microsoft.com/en-us/results.aspx?q=printer+sharing+USB

• How to restore the default values for the appearance of my computer settings?

  I was screwing my Windows 7 (64 - bit) advanced appearance settings Toshiba laptop and I can't understand how it get back all default settings.  Can anyone help?

  Right-click on your desktop and choose personalize, then click on the "Windows 7" theme in the Aero section.  It is the default theme and resets all other parameters related appearance - including colors, fonts, and styles.

• Any instance of time displayed through Firefox is 5 hours off the coast (+) (IE Comcast call time logs, each page to print, etc.). IE and other browsers display correctly as they are all the time on my computer settings. Help, please.

  Any instance of time displayed when you use Firefox see the days off by + 5 hours. I'm in Philly so use felt all other settings are correct on the computer. For example the call time display to Comcast and every foot of page log displays time + 5 hours. I have not found anything useful in Web search. I always check after each update for Firefox but the problem persists.

  Try http://kb.mozillazine.org/Time_and_time_zone_settings

• IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

  IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

  Hi, Slkdogg1.

  Please visit Apple support communities.

  I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

  If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

  Solve the iOS update and restore error in iTunes

  Resolve alerts related to USB in iTunes

  See you soon

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.

• Factory reset N300 WIRELESS Cable Modem Router and now can't access the internet via a browser

  I have reset my modem/router to factory reset through my laptop to try to solve a problem. Now it will not allow Internet access through browsers at all, but I can still ping via the CMD prompt

  .. After a couple of hours trying to solve this problem, I solved the problem by logging into the router... tab basically fixed IP/DNS auto and back to auto settings once again... He was somehow glitches.

• 55XD8505 it recharges continuously--cannot reach the factory reset

  Hello

  My 55XD8505 2016 is having issues. When you enter the home menu is extremely slow and leave then it is only a matter of minutes before the device reboots. If I just start the TV and stay away from the home menu, I can watch TV.

  Now, my intention is to restore the factory settings to try to get the system going again. Normally a reset of the Android system can be done either

  (1) via the settings menu

  or

  (2) by switch on the unit with the volume on/off button + start button / stop key and use recovery menu.

  I can't do 1) since any speed, I navigate the menu of settings, the TV restarts before I can fill a selection of factory settings.

  I can't do 2) either - at least all the possible combinations of Sony, I found does not apply for my TV

  I'm all of ideas - is it possible to factory reset via the USB port (perhaps using ADB)?

  A nailed!

  I discovered that you can use 'top' under adb shell. I did the following:

  (1) connect adb

  (2) adb shell

  (3) top m 5 (this lists the first 5 cpu by using the applications)

  After running high and enter the main menu, I saw the CPU use climbing, and the app in the foreground was always/system/bin/mtkbt, which I figured well be related to Bluetooth. So, after a few attempts of menu navigation speed, I managed to enter the bluetooth menu and disable bluetooth before it restarts.

  Success! Now I can navigate the menu of home once again, I have the tried clear the data cache / anything related to bluetooth from the menu applications and then reactivate bluetooth, but alas the problem returns. So now I'm running the TV without bluetooth. I could try to factory reset the TV tomorrow to see if it helps - at least now I can actually reach the factory reset menu.

  UPDATE:

  Now after you turn off the bluetooth, I could navigate the menu to factory reset. After doing a reset complete, it seems that everything is back to normal - even with bluetooth enabled. Problem solved... Thanks adb.

• My office has been reset to the factory settings. I am enrolled in my sync account, but my favorites that are on my laptop, did not came to the top. Now what?

  I was fortunately sync-ed a year betweem my computer laptop Mac iBook and desktop HP - a lot of bookmarks - I am a student. My office had a small problem and I got it clean and reset to the factory settings. I'm now creating upward. I installed Firefox and made Google my default search engine. Then I logged in sync - no problem (even email, password... I wrote it!) I clicked sync, but my favorites are not come to the top. I closed Firefox and re-opened, but still no bookmarks. I looked at the settings and everything is checked. I wouldn't change anything. What Miss me? Thank you.

  Both devices use new synchronization and more importantly on Firefox 30.

  If you you don't need the synchronization of the former, and even if you use the same address as used for synchronization of the old all should operate under the new synchronization.

  I think that the new synchronization drops devices that have not synchronized within the past 21 days.

  Former site of Firefox Sync: new Firefox Sync https://account.services.mozilla.com/ site: https://accounts.firefox.com