Cannot install my hp l7590 printer my printer connected to the network via another computer

Similar Questions

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• HP Envy 4500: Printer connected to the network; laptop computer connected to the network; laptop cannot find the printer!

  I searched through the forums and read a few threads about similar questions, but do not yet have a solution to my problem.  The printer is connected to the network (even printed page "Congratulations, you're connected" with all the relevant information).  It is on the same network as my laptop.  However, when I run the exe to install on my laptop, it does not find the printer, even when I put the IP address the printer gave me on the congratulations page!  I have run Avast Free Antivirus 2015 on my machine, but don't see any particularly troubling parameters which could interfere.

  Any thoughts on how I can get the laptop to see the printer?

  Henchman21,

  Thank you for the information you have provided to us. I will be you initial steps that could solve the problem.

  Solution

  1. do you have the HP Envy 4500 connected to your computer via the usb cable

  2. If you have installed the correct software for your HP Envy 4500 and the drivers on your computer, you will need to run

  * Note: If the software and drivers for the HP Envy 4500 does not work or does not work the .exe, you must uninstall it in add it and remove programs.

  2 1a, you should download the drivers and software for the HP Envy 4500 on-site HP click on this link.

  2 2 b If you have correctly downloaded it you must connect the HP Envy 4500 device to the computer via a usb cable and launch the installation. Usb printers will be automatically detected by your computer. Installation of HP Assistant there will be a point he will ask you if you want to configure the computer for wireless connectivity, it's time that all wireless information stored on your computer will be transferred to the HP Envy 4500. If this does not work! and I know that it will not...

  3. you should check if you have administrative rights on the computer.

  I hope that the solution I provided will work for you.

  Let me know if the steps above don't work for you

  Thank you

• OfficeJet 4630: Says printer connected to the network, but computer says that it is not connected or idle

  I can't print to our hp officejet printer range 4630.  The printer says that it is connected to our home wireless network.  However, he said that it is inactive or not connected to the network on my mac.  The only way it will print sometimes is if I switch to a wireless network that is named the same as the printer.  AirPrint does not work.  We have a Linksys router.  Not sure if this is the problem or not.  I ran all kinds of diagnostic impressions on the printer and all say that it is connected.  I also tried to put the ip address into my web browser and it does not find the printer when it is connected to our home network.  Help, please!

  Thanks for trying my earlier recommendations. In my view, the problem you are experiencing may be with your wireless router. Normally, I would have you make sure that it is configured correctly, but you cannot access the built-in Web server.

  I want to try to set a static IP address, so we can try to get in the EWS. Please continue here: printer does not maintain the wireless connection

  A little luck? If you were able to set a static IP address, please try and access the built-in Web server. Follow the steps below:

  1. open EWS (use my earlier recommendations) printers

  2. go to the Network tab

  3. network protocols

  4. Select enable IPv4 ONLY

  Now with IPv4 enabled, you should be able to print wireless.

  If this isn't the case, you will need your router company to make sure that the multicast is enabled, Hello Protocol is enabled, mac filtering is disabled and ask them to check if there are updates the firmware for the router and the router's firewall check to make sure that it does not obstruct the communication

  The following ports are also used by your HP device and may need to be opened on your firewall configuration

  Incoming (UDP) ports are ports of destination on the computer while outgoing ports (TCP) are ports of destination on the HP device

  Incoming ports (UDP)

  137, 138, 161, 427

  Outbound ports (TCP)

  137, 139, 427, 9100, 9220, 9500

  The ports are used for the following functions:

  Print

  427, 137 161 UDP ports

  TCP port 9100

  Download of photo card

  137 138 427 UDP ports

  TCP 139

  Scanning

  427 UDP port

  TCP 9220, 9500

  Faxing

  427 UDP port

  TCP port 9220

  Installation of device HP

  427 UDP port

  Web Services

  80, 443, 5222 and 5223

  Any change? I appreciate your persistence!

• Printer connected to the network, but it is not

  Hello world. Could someone help me please. I bought a HP4620 to use with my IPad. He ok installed and connected to the network ok. The problem is that sometimes it prints and sometimes not. Print the Configuration page it says that it is connected, even if the iPad don't see. He gives in detail all the same in every situation.
  When the iPad can't see the printer if the wireless hub is restarted everything goes back to as it should. 1 hour later and it went again.
  Can someone help me please?

  I think that this is a business hub 3 if it changes anything?

• Cannot download driver for HP printer to use the network on your laptop

  My printer stopped working when you try to print on laptop over the network, I tried to download the driver from HP, problems detected were: problem with teredo tunneling adapter Microsoft & no driver for keyboard filter

  Get the drivers from your laptop computer to this computer support site system laptop manufacturers and discouraged via windows update, drivers.

  Re: toredo; http://appuals.com/Microsoft-Teredo-tunneling-adapter/

• Printer connected to the network, MG5320 will print without mac fault but not with windows 7

  Canon MG5320 printer works great and I am able to print wirlessly of my mac mini which is 3 rooms away from the printer, but my windows 7 laptop is right next to the printer can print only if USB is connected and not wireless. I recently tried to separate the printer and the computer laptop windows 7, placing the printer rooms 2 far but the custom still pc wireless printing. I don't know what to do now?

  Hello smiles917.

  It may be possible that the Windows 7 computer is configured to use the USB port and not on the wireless connection.

  Uninstall and reinstall the drivers should fix this problem.  Please, perform the following steps:

  1. open the control panel from your desktop or the Start Menu.

  2. open programs and features.

  3 uninstall the drivers MG5300/MP and the Canon IJ Network Tool.

  4. close all open windows.

  Once this has been done, please visit our Web site at the following address to download and install the latest driver for MP for Windows 7.

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5320#D...

• OJ j6480 all in one. : printer connected to the network, but will not print.

  OfficeJet j6480 all-in-one Windows 8

  My printer configuration report show that the printer is connected to my home network. My Control Center shows that my HP printe (my only printer) is listed as the default printer. When I open it, it shows a document in the queue, and offline. When I click on 'offline' the document in queue is considered and when I click on "Printer" in this window, the drop-down list displays the default printer, but 'use printer offline' isn't not verified. Bottom line, it's that I can't print. Help much appreciated woutd.

  I found someone with a similar problem and a simple solution. I deleted my printer in the "devices" list and reinstalled

  It worked. I suspect that your suggestion about the IP was probably on the brand, it had not occurred to me.

  Thanks for the quick response.

• Cannot install my Lexmark 8300 printer all in one

  Cannot install my Lexmark 8300 printer all in one

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US%20&segment=download

  Read the above, after typing in a Lexmark 8300 printer:

  Please start typing your model number to find your product.

  Please try again. There was no product found for this model:

  Printer Lexmark 8300

  Select

  Contact Lexmark

  See you soon.

  Mick Murphy - Microsoft partner

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• Photosmart HP 7510 - cannot ping printer; Is on the network

  I'm unable to print and scan to my printer. I can't ping my printer but when I look at the wireless settings it has an IP address. I got tired of rattling of the printer from two different computers, a PC connected to the router via ethernet and the other a laptop computer connected wireless. The PC and the laptop can ping each other. I tried the following:

  -Run the HP hardware diagnostics

  -Run the HP network diagnostics

  -Execution of diagnostic software from HP

  -L' all gave the result that they cannot connect to the printer.

  -Rest of the printer

  -Hard rest of the printer

  -Check the firmware updates

  -This has happened since last night and I restarted my computer twice since then.

  I've had the printer for 3 months and it has worked for the most part without any problems. Does anyone have an idea of what is wrong and how to fix it?

  Thank you

  I solved the problem. I rebooted everything but the router and - go figure - this is what fixed the problem.

  Thanks for your help.

• «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

  Original title: Error 0 x 00000709...

  Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

  «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

  I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

  Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

  Hello

  Please follow the suggestions posted on April 16, 2013 by me from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

  Please back up the registry before making changes.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope that the information provided is useful. Do not respond if you need more help.

• Printer cannot connect to the network

  Hello

  I have a photosmart HP 5510 printer - connected to 2 laptops.  Everything worked fine until I finally made a secure network and has not worked since.  I tried add the mac address of the router and all kinds of things and have no idea what to do next. Any suggestions?   I can go as far as to put in my ssid and password in the printer connect but still says 'unable to connect to the network.

  OK, more ideas.  Remove encryption between the router and connect the printer.  From the front of the printer to allow Web Services and see if there is an update for the printer.  Leave it to update.

  When it's done, re - activate the encryption on the router and try again.  It may be a bug in the firmware in the printer (although I doubt - he would have caught in tests).  I still think that his router, but...

• Error found: iP1600 printer can be connected to the network

  Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7

  Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.

  I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?

  Hello

  I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.
  PIXMA iP1600
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware
  Hope this information helps.

• Network Vista and XP - connection to the network printer problem

  I try to print to a network printer connected to a vista from a computer xp machine

  Two computers on a network
  Vista machine is connected through the ethernet card and has a connected printer
  XP machine is via wireless network

  Both machines have the same network name "mshome".
  Open ports on the firewall and also left Software Firewall

  When I print a job, I see it be wound on the info from the printer on both machines, but then, it is automatically deleted.

  I am able to access the hard disks from two computers

  The printer works this way, when you share a printer between XP and Vista where the printer is connected to Vista, XP will communicate with the printer and its drivers Vista.

  So as I suspected it was due from pilots, in your case XP will be offered 64 bit readers which it does not recognize

  If we rely on the printer connected to the Vista 64-bit operating system operating system 32-bit, we need to install the additional drivers (especially the XP must be with 32 bits, only 32 bits of the operating system will not show if it's 32-bit or 64-bit)

  So in this case, you must right click on the printer on Vista and go to the sharing tab, and then click additional drivers, it will be the operating system and Version to select and you will need to select Windows XP x 86 and install the drivers

  Now your Vista will be the 32-bit and 64-bit drivers installed. Now, when you share the printer, when the Contacts XP Vista, Vista has drivers and it will be able to share the printer correctly. Anish