Reset zero Srw2008p

Similar Questions

• M277dw: Reset zero problem using the USB to M277dw

  Hello, I'm just trying to see if anyone else has had this problem. I use the laserprinter HP M277dw and use a current running nine Imac El captain. If I print anything on my printer and then decide to reboot my computer for some reason any, if I keep the USB cable connected to my computer that is connected to the printer, the computer hangs on reboot. It is the same on a full stop to the low and new start up as well. It's almost as if the printer is not disconnected somehow when I shut down or restart. The solution I found is to unplug the printer USB whenever I have to restart or shut down and then reconnect to the computer up and running again. My feeling is that this is related to the El captain, but I can't say for sure. Anyone else see this problem?

  Hi @andrewdawson11,

  Welcome to the Forums of HP Support! I see that you have problems, turn off the Mac, it crashes on restart when the printer is connected by a USB connection. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Run Apple updates.

  You download and install the latest drivers for the printer? If the latest driver is not installed, which can cause this problem. Here is the link if you have not already: HP Easy Start.

  Make sure that the correct driver is added.

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M277dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If the problem persists, try the following:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Test the printer and try to restart the Mac again.

  If there is anything else I can help you, let me know. Thank you.

• Reset zero Aironet 1242AG

  Hello

  I have a huge problem with my partner - we moved our password list! Is there a way to reset the access point, without going through the GUI? Any help is appreciated a lot! In the contrary case, we will have to consider service... Thank you

  Hi Isabelle,.

  You can use this method;

  Reset the AP? Cisco IOS Software

  All the steps in this section in order to reset Cisco IOS software-based APs.

  Note: The Cisco's IOS software-based APs have a default configuration includes a user name and password combination. The user name and the password is "Cisco", which is case-sensitive. After you reset to the factory settings, be prepared to give "Cisco" under the user name and password when you are prompted by the GUI or the command line interface (CLI).

  If the privileged command ap # is available in the CLI prompt, command to clear writing and the command reload erasing the startup configuration and reset the unit.

  If the GUI is available, choose system software > System Configuration. Press the Reset to default button.

  If the GUI or the CLI is available with sufficient privileges, complete these instructions in order to use the Mode key:

  Disconnect the AP.

  Disconnect the external power supply intake or the Ethernet cable to be able to inline.

  Press and hold the MODE button while you reconnect power to the AP.

  Press and hold the MODE button until the status laps LED amber, and then release the button.

  The status LED turns amber in approximately 1-2 seconds.

  After the AP reboots, reconfigure the AP and use the interface of the web browser, Telnet interface or the Cisco IOS Software commands.

  Note: The AP is configured with the default factory values that include:

  The IP address, which is set to receive an IP by DHCP

  The default user name and password, "Cisco".

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_password_recovery09186a00800949d0.shtml#resios

  Hope this helps, I know it's a bummer :(

  Rob

• Reset zero point to navigate to a different page

  Hello
  
  I want to reset an ITEM_VALUE on the Page [say Page 94] only when I'm coming from another page, I have a few buttons and select lists that will SUBMIT and re - direct to the same page. In this case, I wish that the value to be preserved.
  
  I had intended to assign NULL to the element in a process that runs BEFORE HEADER.but that this will work any time select which list and buttons are used to redirect to the same page... Please pass me the details that can help.
  
  Thank you.

  Hello

  You can do this:

  Create application component for example called G_LAST_PAGE.
  Create Application "After Header" calculation for this type of request "value of the element.
  Break-in to the calculation

  APP_PAGE_ID
  

  Then, in your page 94 create process "Before Header"

  Px_ITEM1 := NULL;
  Px_ITEM2 := NULL;
  Px_ITEM3 := NULL;
  Px_ITEM4 := NULL;
  

  And place it under certain conditions "the body of the PL/SQL function returns Boolean.

  IF NOT :G_LAST_PAGE = :APP_PAGE_ID
  THEN
    RETURN TRUE;
  ELSE
    RETURN FALSE;
  END IF;
  

  Example is found in your page 964 app 998

  BR, Jari

• Equium A60 - I need to factory reset

  I have an Equium A60, I need to reset zero factory because it is very slow and has a lot of unwanted things about it. However, I need to keep all the I-tunes that is on. I have also no original discs etc to re program, and I'm not a total pc expert.
  Can anyone help?

  Hi Mark,

  The only way to get your A60 comes back to its factory condition is to have a set of a Service partner chartered Toshiba recovery disks. In addition, you will need to back up your I-Tunes (by copying them to an external hard drive if you have one, or else by copying them to a CD/DVD flammable).

  Note that the system from the recovery CD restore will erase the contents of your hard drive and you will find while the latest updates Microsoft etc. will be missing. You can doenload the Microsoft Update site.

  Personally, I would recommend just clean your system of unwanted content. The simplest approach would be to run a utility like CCLEANER (Google to do this, it's freeware). Then run a full scan of the system (from your existing package of anti-virus) and finally run an adware scan using Ad-Aware and SpyBot (Google for these, they are both freeware).

  Finally, go to the Add/REMOVE software control panel section and remove any what spftware/applications you don't want.

  Run a system utilities disk defrag tool and the work is done. Your A60 should be as good as new but with all the latest Microsoft Updates always applied.

  Kind regards

• Migration of thick Eager VM supplied zero supplied to lazy thickness to zero

  I noticed that you can change the disk provisioning on a Windows prompt to reset zero Thick - Provisioned LAZY to Thick - Provisioned HASTE updated but NOT the reverse.

  So, it won't change back to LAZY.

  Anyone able to confirm?

  No, it was to test why did not have backups. Thank you

• 18.0.2 open several tabs, but will not open sites in tabs.

  What's up with the updated version 18.0.2? It will open a 2nd tab, but does not go on the site. Repeated attempts result in the same thing. I stopped, restarted Firefox. First tap opens fine. 2 and subsequent tabs aren't going anywhere seems open but then just stalls out.

  Hello starmanjb, average try to reset firefox (this will keep your bookmarks and passwords) as described in Firefox Refresh - modules reset zero and parameters.

• House-sharing has stopped working on my AppleTV 4

  Apple TV 4 - A1625

  rMBP (end 2013)

  iTunes 12.3.2.35

  Home sharing my collection of videos iTunes worked and then it didn't.  It's the good Apple ID on Apple TV and the Macbook Pro.  The computer and the Apple TV are connected to the same network, and both see the strength of the complete signal.  I tried the following:

  1. signature and sharing of House on AppleTV

  2 singing and in iTunes home sharing

  3 signature and in the iCloud on Mac

  4 reset zero AppleTV to factory settings and his resignation in all

  AirPlay works very well.  I can airplay video Quicktime for the AppleTV, but if I go to the computer I get the message "Turn On iTunes home sharing.  It is turned on.  Then I disconnect and reconnect (Yes, with the same AppleID, the only one I have).  Nothing.  Œuvres music from Apple.  Works of iCloud photos.  Yet, I can't connect to my own library on my computer.

  It's very frustrating.

  You could try to restart iTunes on the computer or restart the network router.

• Printer print printing printer will not align. Worked very well, put in new cartridges and now will not align.

  My HPPhotosmart C5580 all-in-One worked very well.  Put in new cartridges and now she is not aligned.  Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work.  Help.

  This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.

• HP Envy Ultrabook 6 t-1000 CTO: HARD drive is not displayed

  Hello.

  I had the Windows Blue Screen of Death (BSOD) once or twice when using simple everyday applications on my Ultrabook. The results were either not different on Mode without failure. After awhile, I started having 'No Bootable disc' error while starting up. Recovery (press F11) will not appear so. I tried the HP Diagnostics (by pressing F2 at startup) and Test the hard drive as well as the Test of memory shows PASSED on the formats of short or long.

  I tried the following:

  1. I did some research on Google and entered in the BIOS/Insyde utility (by pressing F10 at startup), loaded default installation (by pressing F9), saved changes and did a restart, but I get the error again.

  2. I downloaded Windows 7 64-bit Microsoft store, created a boot USB and plugged. I was able to access the Windows Installation Page, but he wouldn't show my hard drive at all.

  3. I find the support page of my product on the site HP and downloaded the latest drivers, put it in a USB device and booted up the system from the Windows Setup disc. On the page where it was supposed to show my internal hard drives, it showed only USB drives and there is an option "Load Driver" I clicked on and selected the driver files I downloaded from the HP website. Everything was going well until I chose iaStor.inf... this time, the system has hung up and the BSOD appeared with an error stating the file 'iaStor.sys '.

  My questions:

  1 if diagnostic Tests are passed, I can assume that the material is well?

  2. Although I already placed an order for HP recovery discs, I doubt if it could help because my HARD drive drivers seem to be missing. What is your opinion?
  3. is there a way to reset zero/reload drivers BIOS/Insyde utility?

  My system features:
  Laptop model: PC portable HP Envy 6
  Product no.: A9G58AV (the back panel laptop says A9G30AV)
  {Information}
  Processor: 2nd generation Intel Core i5 - 2467 M CPU @ 1.6 GHz + Intel HD Graphics 3000
  BIOS version: F.0D
  Total memory: 4 GB
  Operating system: Genuine Windows 7 Home Premium 64-bit
  HARD drive: 500 GB 5400 rpm SATA RAW 7mm hard drive with 32 GB WSSD faster reduction of the hard disk Cache

  Unfortunately at that I disagree with Paul and I think that you may be looking for a bad motherboard, but we would like first to try to remove the disc of WSSD 32 gig.

  Here is the Manual:

  Repair manuals

  See Page 40. Unfortunately, this model is a little difficult to disassemble, but measures are set out in the manual. If it is still under warranty, you can't do that. If the hard drive passes the test of F2 then I tend to think that it's not the hard drive.

• USB power surge

  I got an error message indicating the USB power surge/failure.

  Since then, all 3 USB on my laptop is no longer works. If I plug an optical mouse into it the optical light doesn't even come on making me think it's a question of power.

  In Device Manager, all the usbs show also operational (although when you select one and go to the power tab, it shows 0 under the power available.

  I'm worried I have fried my motherboard, but everything else works fine.

  any suggestions?

  
  

  Hello

  What you can do is to reset the usb hub. This will probably fix your problem and if it doesn't it is will also be useful in pointing to USB are damaged by the surge.

  First try these steps to reset zero USB hub and let us know the result. Here are the steps:

  USB controllers require that an IRQ be assigned. The IRQ line is assigned in the computer's BIOS, and usually IRQ 9 is assigned.

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. Click Start, click Run, type sysdm.cpl in the Open box, and then click OK.
  1. Click the Hardware tab.
  1. Click the Device Manager button.
  1. Expand Bus USB controllers.
  1. Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  2. Restart the computer and reinstall the USB controllers.
  1. Plug in the removable USB storage device and test to make sure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/310575

  Hope this helps,

  Steve <> Microsoft Partner

• ISE restoration fails after 80% (Segmentation fault)

  Hi all

  After a system crash, I try to restore. First of all, I did an ise to reset zero-config application, then a restore on an ftp repository.

  After 80%, it will fail with to DB Syncup with a segmentation fault. Tried with different backup versions have the last patch level.

  Any ideas?

  Thank you

  Start the restore.  Please wait...
  % of ongoing restoration: from restoration... 10% have completed
  % of ongoing restoration: recover the repository backup file... 20% completed
  % of current restore: backup data decryption... 25% completed
  % of current restore: backup data extraction... 30% completed
  Leaving the currently connected AD domain
  Please join the AD domain since the administration interface
  % of ongoing restoration: ISE stopping process required for the restoration... 35% completed
  % of ongoing restoration: restoration ISE configuration database... 40% completed
  % of ongoing restoration: the metadata for database update... 70% finished
  % of current restore: restore the logs... 75% have completed
  % of ongoing restoration: ISE performance, database synchup... 80% finished
  /opt/CSCOcpm/bin/isecfgrestore.sh: line 1248:11162 Segmentation fault (core dumped) curl - q - k - a tlsv1 - connect-timeout 10 https://$MYIP/admin/index.jsp > / dev/null 2 > & 1
  /opt/CSCOcpm/bin/isecfgrestore.sh: line 1248:11177 Segmentation fault (core dumped) curl - q - k - a tlsv1 - connect-timeout 10 https://$MYIP/admin/index.jsp > / dev/null 2 > & 1
  /opt/CSCOcpm/bin/isecfgrestore.sh: line 1248:11187 Segmentation fault (core dumped) curl - q - k - a tlsv1 - connect-timeout 10 https://$MYIP/admin/index.jsp > / dev/null 2 > & 1

  .. .and so forth

  **************************************************************************************************************

  Deploying applications engine Cisco OS version: 2.2
  ADE-OS Build Version: 2.2.0.162
  ADE-OS system architecture: x86_64

  Copyright (c) 2005-2014 by Cisco Systems, Inc.
  All rights reserved.

  Version information for the installed applications
  ---------------------------------------------

  Cisco Identity Services engine
  ---------------------------------------------
  Version: 1.3.0.876
  Build Date: Kills Oct 28 04:02:29 2014
  Installation date: Fri Dec 5 08:31:15 2014

  Cisco Identity Services engine Patch
  ---------------------------------------------
  Version: 1
  Installation date: Mon Jan 26 10:21:50 2015

  After sending the papers suitable for TAC, I learned that even if the restoration seemed to have failed, 80% the effective restoration is complete and what was failing was the synchronization of the node.   Knowing this, I could access the admin GUI and synchronize to other nodes and worked no problem manually.

  It turns out it's documented issue, CSCur36983will be fixed in version 1.4.

  Here is the answer I got from the TAC:

  "According to the newspapers sent, we are certainly hit CSCur36983 who will be."
  set in point 1.4 of the ISE:
  https://Tools.Cisco.com/bugsearch/bug/CSCur36983/

  According to the details of the bug, when we reach 80% of the food part is
  has already completed. What is a failure is a synchronization with the rest of the nodes
  in the deployment. Therefore, you can reload the ISE at this point and you
  should have access to the GUI admin again. From there, you can force a synchronization upward with the other nodes. »

• Camera of Smartphones blackBerry is not a function

  The camera keeps telling me he couldn't start caused by another application uses. I am looking for other applications and no idea of what goes wrong. How easy to reset zero/fix it?

  Please try to do a battery pull and let it restart the first.

• Palm 750v locked keys

  Hello friends,

  Impossible to use some of the keys on my Palm 750v smartphone, such as the OK button also typing letters and numbers. How 'unlock' them?

  PG

  Thank you very much!

  Reset zero worked!

  Really enjoy this forum.

  It is the first time that I have not posted anything and thank you for the quick response and the second time reading the forum helped me to solve problems with my Palm Treo 750v.

  Sincerely

  PGA

  Message relates to: None

• Change of Windows8.1to Win10

  On win8.1 upgrating Windows 10 and all programs reset zero must be reinstalled

  also Adobe Lightroom 6 and CS5

  on the adobe commercial register accepts no serial number you, as to many computers. (1 desktop computer and computers portable 1)

  How do I uninstall to show if all were erraged by the re - install win 10 (on you same laptop)

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations