Resize the VM disk and hot add drive to vCloud Director?

Similar Questions

• What is the right way to expand the virtual disk and then the OS partition?

  I have a Windows XP operating system in a virtual machine VMware.  I have

  you want to increase the size of the hard drive.  It currently has a 50 GB

  partition on a 50 GB VHD.  I increase the size of the

  50 GB to 100 GB in VMware virtual hard drive.  Then, can I use

  Windows disk management to increase the size of my partition of the

  side OS to use all the 100GB he sees now?  Or will

  corrupt my data or cause a problem as I really need to

  use a third party tool like EAUSUS inside Windows to extend Windows

  on the size of the virtual hard disk?

  In fact the way you describe, resize the virtual disk and then developing the partition are the way to go. But there are some things that you should be

  aware of.

  -If the VHD is on an IDE controller, you may not be able to resize the virtual disk. In this case use the converter. With the converter, you can resize the disk including the partition and - if desired - replace the IDE controller by a SCSI controller.

  -If you have only one partition under XP (that is, drive c :)) you cannot extend the partition with the diskmanager/diskpart. In this case, start your virtual machine from a CD/DVD Vista/Windows 7 in Repair Mode, open a command line and use "diskpart" from there to "extend" your partition.

  André

• Why the SAN disks and drives NAS recognized differently by the computer?

  Hi all;

  I'm a newbie in the sharing of storage.
  Why the SAN disks and drives NAS recognized differently by the computer? Computer sees SAN disks as local drives, NAS drives as network drive, even if they are all connected to the computer by the same network topology.
  I knew that SAN uses the block level transfer to transfer data all in SIN use level file transfer. Is that what this has something to do with which SAN and NAS drives are recognized differently by the computer? If so, how?

  Thank you.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Resize the system checkbox and radio buttons system

  Is it possible to resize the system checkbox and radio buttons system. If we right click on one of them and go to properties, size controls are disabled. I wonder if it's feasible.

  Also I noticed that I could add the new radio buttons to do a right-click and choosing Add new button. Is it possible to achieve this programattically.

  Kind regards

  Austin

  AustinCann wrote:

  Is it possible to resize the system checkbox and radio buttons system. If we right click on one of them and go to properties, size controls are disabled. I wonder if it's feasible.

  As mentioned, system controls cannot be customized, because they depend on the windows theme. However, here are some Boolean values, so all you need to do is use an ordinary Boolean value and import the graphics that you want in the case of true and false. They can easily be made to look like an oversized check box. More details, especially about radio buttons can be found here.

  AustinCann wrote:

  Also I noticed that I could add the new radio buttons to do a right-click and choosing Add new button. Is it possible to achieve this programattically.

  You could probably do it in edit mode programmatically by using scripts. You can't do it at run time.

  To fill a RadioButton with new Boolean values, you can simply drag the new values Boolean inside or even shift-do drag an item to create a copy of it. Don't forget to change the labels to something intuitive.

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• photos should be on the hard disk and not a network before catalog reader can find them.

  My photos are on a network drive. I created a catalog on the hard drive of my computer of these photos. When I later open the catalog, Lightroom indicates that the file is not found. Photos should be on the hard disk and not a network before catalog reader can find them?

  "Can't find" indicates Lightroom does not know the location of the photo because it has been moved, deleted or renamed outside of Lightroom.

  To resolve this problem, follow these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Photos can be on a network drive.

• Script to create the folder on the physical disk and not in the package

  Hello-

  Attached is a script that I have which will create a folder on the C:\ inside the bubble.  What I need, it's so he can create a folder on the physical disk and not inside the bubble.  Can someone tell me what I did wrong here?  I have a similar script which creates a folder on the D drive for the linked clones and it works fine.  Thanks in advance!

  Change the isolation mode of the file %drive_C%\vaforms5 'Merged' into the Attributes.ini, rebuild the ThinApp and check.

  With the help of isolation have merged, the application can read/write file on the physical machine.

• cannot resize the virtual disk (vmdk) after successful hyper-v conversion

  Hello

  We are experiencing an environment vSphere 4.1. I have a problem on the Ramdisk resizing.

  We had managed to convert a hyper v VM. Virtual machine operating system is Windows 2008.

  After that, I can't resize the virtual disk (GB in disk options was gray-ed out, even when the virtual machine is power down)

  It's strange

  I have attached several screenshot of the virtual machine.

  Need your advice.

  Thank you

  His grace is on the IDE interface and you can not resize. the only way is to reclone using vmware converter and resize in the wizard. For more information: http://www.yellow-bricks.com/2010/05/28/resizing-your-ide-virtual-harddisk/

• TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

  Original title: TrayApps Message

  I get a message, "TrayApp" - the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the TrayApp disk and click on 'ok '.

  Hi BobKern,

  Follow the steps listed in the article mentioned below to solve the problem:

  Resolving MSI startup errors

• I try to use the clean disk and after it starts I get a message that it has stopped working

  I try to use the clean disk and after it strats up, I get a message that it has stopped working

  Original title: clean work investor disc

  Please use this tutorial and try to do the cleaning disc again.

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

• I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered the product key and it says that it is incorrect.

  original title: Windows Visa re - install

  I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered codes product etc. According to the disks but still no joy. How to solve this?

  Kind regards

  John Welsh

  I had to reinstall windows on my Dell XPS recently. I used all the original disks and now I get an error when I try to activate it. I entered codes product etc. According to the disks but still no joy. How to solve this?

  Kind regards

  John Welsh

  Activate by phone

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
  Please note this step #9

  If the activation service informs you that she has failed and cannot help with activation, then STAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Vista. The operator will give you all the numbers to ID of Confirmation if they accept that your copy of Vista is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Vista on a new computer after uninstalling it from the old one, etc...)

• When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.

  When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Resize the search box and address box Win7

  Resize the address bar and the search box in Windows Explorer in Windows 7.  I have the double arrow to resize, but nothing happens when I drag it.  I tried to unlock the toolbars, but this does not change the action.  My address is 1/4 the size of the search box and the strange looks.

  Set your DPI up to 185, I set mine at 185 and the issue went away.  anything between 185-200 and the problem comes back.

  185 is an acceptable DPI, just a workaround solution.

  and a little faster than a SFC installation or repair, which solves the problem.

• I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  If it's a copy of volume license installed, you will need to contact your employer to find the product key and get the installation files.

  If it is preinstalled at the factory with Windows 7 Professional, then use the recovery partition to reinstall Windows 7.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.