resolution defined

Similar Questions

• Background images for differnet resolutions

  Hello

  Is there a way to define a single resource (background image) via styles or any other approach that will have definition for all taken screen resolutions supported (BB10 has 3 resolutions defined with portrait/landscape modes = 5 bitmaps)?

  So, I can use this asset without success all the stuff in a code trying to find what the resolution is now and where - and then only - get a correct picture of the assets.

  There are a lot of messages in this forum, but none seems to describe exactly the same problem.

  Thank you

  If you talk to a background image for the application, you have to manage yourself. If you are talking about the splash screen, then you would list each boot image in the XML file.

  You can resize the image to fit the scene, then you might have a rectangular and square and then resized image depending on the scene according to the needs. If you don't want to resize, then you need an image for each resolution device and a naming convention, you could load dynamically depending on the size of the stage (bg_720_720.jpg, etc.).

  CSS may be able to help, since you can load different CSS at startup, but this would require still allows you to define a CSS for each change that you want to support. CSS will be more important when BB10 is available on the PlayBook, since the density of the screen is very different.

  Does that help?

• High screen resolution problems

  Hello.

  You just bought a Dell XPS lapptop with screen resolution 3200 x 1800 and windows 8.1. After installing photoshop CS6, the interface of the program, the menus and icons are extremely small and almost impossible to see. This also happens in the bridge, but not in Lightroom. Grateful for your help.  Best looks/janis lukas

  panohori19836 wrote:

  Still, I'm working on a big 27 inch as well with a 2560 x 1440 resolution, and I don't have this problem.

  You need get a better grip on the resolution.  2560x1440px and 3200x1800px are not resolution, they are a number of pixels displayed your displays.  For you you need to take into account the size of display resolution.

  Both of your displays have same 16:9 aspect ratio but have different sizes, and the number of pixels.

  Office 27 "screen displays 2560 x 1440 pixels that a 108pixel of density per inch pixels are 1/109" x "1/109 he be 11 881 px per square inch.

  Your laptop 15.6 screen displays 3200 x 1800 pixels that a 235pixels of density per inch pixels are 1/235 "x" 1/235 there are 55 225 px per square inch.

  So the same thing of pixels displayed on you 27 "display. Will posted on your 13.6 "appears in and region 1/5 the size that they appear in you 27" screen.

  The resolution is the Pixel density DPI pixel size.   Pixels have no size until there is a resolution involved.  Display are executed at a DPI of resolution they do not image the resolution defined in the image file.  They display only one pixel in size usually their size native pixel.  So the pixels in an image are displayed at the display DPI resolution and will not be the same size on all screens.

• HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

  Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

  I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

  And thanks for the quick reply Provost.

• Multi-page scanning on Officejet Pro 8600 with bucket

  I had to replace a process of multi HP 6400 series with HP Officejet Pro 8600. With the old software that he would ask if there was other pages when you use the flatbed scanner option. I can't understand how to do this using the new software and it automatically creates the file after the 1 page. Any advice would be appreciated.

  Hello

  You can scan multiple pages in the flat glass using the HP scanning software.

  Open the HP Officejet Pro 8600 software and click on the Scan option document or photo.

  Select PDF, check the box show the preview and the resolution defined as 300 dpi or less.

  Click a Scan and use the button Add Pages to add extra pages.

  Shlomi

• Vegas effect - only work on 100% display

  Hello

  I have some problems with the new 2015 AE, if I use the vegas effect (After Effects help |) Generate effects) it only works when its display at 100% if I reduce the view for say 50%, the effect is not indicated.

  I have 4 videos time k is important for reducing me/us the video inside the ae, is this a known problem?

  

  

  WBR and thx!

  Leo

  The effect derives its image and lower resolutions of course outlines, the result can change. Your image is low initially, so that any scaling commits can degrade simply Alpha too for the effect to work. The resolution defined pop up in full or in fact always check your settings to 100%. This is the only reliable method to predict the outcome in any case.

  Mylenium

• Export jpeg ignores the setting of 300 DPI and 72 dpi is becoming

  When I export my file (1200 x 1200 pixels) to JPEG, the jpeg final is only 72 dpi, even if I take 300 DPI and maximum quality of the JPEG options window. The original file that I use is quite large 3366 x 2476 Pixel with 300 dpi. Help someone?

  Different software may interpret the resolution defining differently or not at all to interpret it.

  Try and open the image in Photoshop and check the resolution here.

• is daq bit resolution applied to the area defined in the daq assistant or well to the limits of physical blood of the daq hardware.

  Hello, this is my first post here,

  I've been wondering about this:

  When you configure a new daq with the daq Assistant, is the resolution applied to the voltage / number of entries you define, or is it a fixed value per volt by channel.

  For example:

  I have a 6015 usb data acquisition, it has 16 inputs analog, 16-bit resolution 250 kech. / s 09:50 volts.

  so is this as (2 ^ 16) / (16 * (-10-10)) = my resolution through volt?

  or that this has nothing to do with the amount of channels,

  If I want to measure more than 0 to 5 volts, my 16-bit apply from 0 to 5, or even more scale of data acquisition (which is 09:50 volts)

  Thank you

  Marco

  You will get full-resolution 16 bits on each channel regardless of the number of channels is configured.  Renault most are multi-plexed if your specification of sampling RATE in usually a global significance that you can only scan channels with a sampling frequency = MAX RATE / number of CHANNELS.  Also, most NI Renault have a Programmable Gain amplifier on the front-end server, so if you specify a range of voltage smaller in your task configuration the amplifier will automatically increase the gain to use most of the possible BIT ADC.  You see care device and for more details...

• CAN´t define a proper resolution for UltraWide external screen 21:9 (2560 x 1080 px)

  After the installation of macOS Sierra my external screen shows only 16:9 (1920 x 1080 px with black bars on each side). He used to work before I updated. Now the correct resolution is not even appear in the display settings on my MacBook Pro (end of 2015). I don't want to use or pay for any external software, please fix this.

  It seems to be a common problem: macOS Sierra no longer supports monitors ultrawide?

• My iMac 27 "was missing from the option of resolution 1920 x 1080 since the day I bought it. Apple said it should be fixed in future updates to OS x, but that didn't always happen.

  I have a beginning 2013 27 "iMac I customized with all the best options at the time. Since I bought it, the resolution options have displayed no 1920 x 1080 option, I tried several things as now the option key while noting key worked. In years past, I asked Apple several times about this, and their response was always 'it should be fixed in next update OSX." Well, its been a few years already, and 3 new releases OSX and the problem has never been resolved. I'm pretty sure its a problem with the graphics card from Nvidia, but I can't contact them for support because they can't really do anything. It is not like I can update the drivers for the card, software update is supposed to handle this.

  I think that its ridiculous that I had this problem for so long without help at Apple. It isn't that I'm missing a non-standard resolution.

  What happens when you:

  Define the main screen resolution

  1. Choose the Apple menu > System Preferences, click view, and then click display.
  2. Select chipped, then select one of the options of resolution nationally.

• Position of cursor/Cycle not full resolution

  A bit new to Logic Pro X. I'm bouncing titles using cycle to set the beginning and the end. I would like to point out the exact position of the start and end of the cycle bar so I can go back to a previous position if you wish. In full zoom I can move either end bar back some distance without changing the value of the Position display. The resolution I want is not indicated in the help tag, nor measures define the points of beginning and end displayed in the dialog bounce also precisely I want either. I realize these are microscopic changes, but still...

  Maybe using SMPTE points offers the best resolution. At one point, I was able to see a pop up to the SMPTE standard, but cannot find a way to get that back.

  Thus,.

  1. What is the best way to note cursor high resolution and post cycle?

  2. How can I display SMPTE point info?

  Thank you!

  Logic has a primary rule and a sovereign school.

  The primary ruler is set with the option 'Use Musical Grid'. If enabled, displays the primary sovereign bar. beat (on time) and if disabled, the primary ruler displays SMPT (absolute time)

  The secondary rule the other displays of everything that is on the primary sovereign.

  You can view the secondary rule in the area of the track (or other editor windows) by turning in their View Local Menu.

  

  In order to see the small increments, just zoom in as much as you need and set Snap to "Smart".

  BTW, once you set the range bounce (Cycle, region, project) and open the Bounce window, you can change the range in the beginning and end of the Bounce window field.

  

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• External display via mini display port resolution

  Hello

  I have an iMac 27 "late 2009 with a graphic of ATI Radeon HD 4670 256 MB and the latest Mac OS.

  I just bought a Samsung U28E850R to use as a second screen UHD and connected via the port mini screen iMac to display the port of the Samsung.

  The problem is that it is not possible to set a higher resolution than Full HD on the Samsung. But with regard to the iMac specification 2560 x 1440 should be possible.

  Does anyone know the solution for my problem? Thank you.

  Hello there, riedma.

  It seems that you are wanting to be able to choose from all available on your new display resolutions. The following Knowledge Base article offers strong information to achieve this:

  OS X El Capitan: set the resolution of your screen

  Screen resolution determines the size of the text and objects on your screen. By default, the resolution of your screen is set to display the text stronger and more detailed images. So it is best to use the default resolver, you can manually set the resolution to make the text and objects appear larger on your screen, or adjust it to make the text and objects appear smaller in order to have more space on your screen.

  Depending on how you set the resolution, some applications may not entirely correspond to the screen. Using a scale of resolution can affect performance.

  Define the main screen resolution

  1. Choose the Apple menu > System Preferences, click view, and then click display.

  2. Select chipped, then select one of the options of resolution nationally.

  Define a connected screen resolution

  If you have more than one display, additional resolution options are available.

  1. After that the display is connected, choose Apple menu > System Preferences, click view, and then click display.

  2. Press the Option key while you click chipped to see additional resolutions for the second screen. Then select a resolution option to scale to the second screen.

  If you changed your screen resolution and now there is no picture

  Connect multiple monitors to your Mac

  Set of accessibility options

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• 1080 p resolution problem

  In iMovie, I don't have an option of 1080 p resolution when I save to file.  Why?

  I found my answer... iMovie will define the resolution for your movie based on the resolution of the first video clip.   I used only the photos in my film, but enforcement remains limited my level of resolution.   I created a new film, set in a 1080 p clip, stuck in my current film, then removed the clip of 1080.  iMovie so let me to save the movie file.   My source:

  Solved by GeeD on 28 April 2015 02:28 AMSolved

  iMovie10 only works and exports the 16:9 format.

  The resolution is defined by one of the first music video set in a project calendar.  To change your project to 1080 p do as follows:

  Create a new project

  Put all known clip video 1080 p in the project (it can be removed later)

  Select the old project and then edit - select all then copy Edition -

  Select the new project and then edit - copy

  The new draft should now be 1080 p.  You can remove the first clip if you wish.

  Geoff.

• Portege R700 - cannot adjust the 1366 X 768 screen resolution

  My screen does not have the entire screen - he ends up on about 2cm on the right side.

  The problem is that I can't adjust the 1366 X 768 screen resolution. Highest on the list of options is 1200 X 800. I downloaded the current driver - but it does not help. I used system restore a few times and it is sometimes useful, but not always - IE, it defines the resolution of 1366 X 768, and all goes well.

  It makes me crazy!
  It's a R700, windows 7, 64 bit.

  Are you using the original Toshiba recovery image? I mean the original pre-installed OS that you got with your laptop?

  I mean the original image is designed for certain model of laptop, so I can't imagine that this problem occurs with the Toshiba drivers.

• Satellite Pro U400-13 has: forcing Panel full screen fit on all resolutions?

  Hello.

  I use a number of applications that provide full screen options, which generally reduce the screen resolution to something like 640 by 480.

  My graphics chip is Mobile Intel (r) 965 Express Chipset Family.

  By default, my screen resolution is 1280 by 800 and is set to use the full screen, but every time Panel that the resolution is changed by the properties display or a request, instead of the chart options intel, it defines desktop Center screen.

  I've already updated the graphics driver, is there a way I can continue my full screen option, instead of office of centre?

  I found that it will remember that my adjustment Panel options when I use a lower resolution on 1280 by 800 by default, but this isn't something I want to do.

  Hello

  Your case is very specific, and I guess the 3rd party applications affects the display resolution and therefore a driver update or switching of all other options will not help you.

  Here, I doubt you will find a way to avoid this change in resolution.
  It seems that you must always manually change in the Intel graphics driver manager.

  PS: for several days I m owner U400 and everything works properly

  Welcome them