resolution of domain Modbus?

Similar Questions

• Ping.exe DNS Lookup method

  Utility how ping.exe performs its domain name resolution as it does not use traditional port 53 UDP DNS lookup. I tried using Network Monitor 3.4 TechNet but couldn't find anything that seemed to do the trick.

  Any help would be greatly appreciated.

  Just another note the absence of any visible search in NetMon 3.4 is the same for the areas not cached.

  Thanks in advance!

  If your local DNS cache contains the resolved domain name so there is no need to query DNS server.

  in all other cases, I think it uses the DNScache service for resolution of domain, that is if local cache is missing the field being ping IP address.

  Try process monitor from technet

  apply the filter for UDP only and you will see will demand UDP Port 53 so that ping an unknown host.

  He will tell you even what type of program, and request that the user initiated.

• Bootstrap information is not impossible to resolve the IP address.

  Cannot resolve the 10.xxx.x.xx of IP address for the domain name FULL on the node testpd-ComputeMaster-0. To deploy Hadoop 2.x server DNS must set forward / reverse FULL/IP domain name resolution.

  If they are all using IP addresses, why not?  All the guests created the ping.

  I don't really know how to have the names hung in DNS during the build.

  Any ideas?  Thank you.

  Hi Nancy,.

  If it is not able or not convinient to configure the resolution of domain name FULL/IP on the DNS server, here is a solution to your testing needs.

  1. turn on the VM hadoop-model under BDE. VAPP.

  2 Add entries as «10.0.0.1 hadoop001.domain.com ...» 10.0.0.xyz hadoopXYZ.domain.com' in/etc/hosts. As a result, Hadoop will be search FQDN in/etc/hosts instead of the DNS server.

  Note:. When you modify the hadoop-template, you must follow "maintain a custom virtual computer model Hadoop" pubs.vmware.com... 74B8C10F1C.html . After turning off the hadoop-model, don't forget to restart the tomcat server BDE server.

  -Jesse

• composer vCenter and view in different area

  Several servers view against amp & unique vCenter composer; #187; myvirtualcloud.NET

  I followed this multi-tenant schema for configuration to our aforementioned private cloud in the link.

  ESXi and VCenter belong to area A.

  Composer, View Manager and desktop related clones are in area b to tenant 1.
  Composer, View Manager and desktop related clones are in the area c. for tenant 2. etc.

  When I did and composer deployed machines, I ended up with "... / SDS ' was not found in the data store.

  The question is how composers of areas different access store data and deployment of desktop computers.
  Y at - he needed authorization for composers?
  How to get this Setup?

  Max

  Hello

  Sorry if I'm not clear, English is not my mother tongue.

  vCenter doesn't have to be in a domain. In fact, I even use the VCSA for centuries (new version, this is exactly what need you since the limitations are parties) should not be part of a domain.

  Composer should not find itself in a field no more. You can install local MSDB (SQL Express is very good even for its huge pods but given the huge pods must already have a database server some part...) with the SQL account for authentication, no need to be in a field here.

  Security Server cannot be in a field.

  Server connection MUST be in a domain. It is mandatory, that you can not install even if you are not.

  You'll also need a domain account for the composer to be able to add computers to the domain.

  This is what it takes, now, you put it in the right place in the display configuration. When you declare your vCenter, for example, you only need to set the accounts needed to communicate with vCenter with sufficient rights (and rights should apply to the ROOT level, not at the level of DATA Center), with the composer with sufficient rights as well (in general, you will use the composer server's local administrator account). To properly configure the composer, you must also declare the area you are going to compose, it's where things can go wrong because the composer must be able to resolve this area, so my advice is to add the domain DNS server (most of the time, DC) as a local for the resolution of domain DNS. Then, you will need the domain account to be able to compose this area;

• Dns resolution for a sub.domain with some ISP DNS external in the management of the DNS (win20008 r2) service?

  Hello

  We have a domain.   www.mydomain.be.

  It is a public domain managed by our office.

  It is also the same for internal network active directory domain mydomain.be

  Of course, we have internal DNS in our active directory.

  the Registrar has created a subdomain.  www.Sub.mydomain.be

  My question is: how to solve (for my network internal only) sub.mydomain.be by the DNS of the ISP.

  --> How to work around the internal our DNS resolution for the sub.mydomain.be ONLY for the 'DNS ISP or registrar "?

  our internal DNS (r2 win20008 in active directory) must continue to resolve all applications except the sub.mydomain.be.

  Create forwarders? or another technique?

  Thank you

  Hassan,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• DNS resolution with 2 domains?

  Hello

  We have a constant VPN connection to our parent company. I can ping to IP addresses no problem. Since then, I made some changes to our DNS server so that we can resolve their addresses. I have added a conditional forwarder for their area, which works very well.
  What I want to know is, is it possible to configure our DNS server so that I can resolve the addresses without using the FQDN? Example:
  We are Domain1, the parent company is Domain2.
  If I ping Server1 (FQDN Server1.Domain1.com), our DNS server will resolve it for us, and it will ping successfully.
  If I ping Server2 (FQDN Server2.Domain2.com), it will not be solved.
  Server2.Domain2.com ping resolves the address.
  
  Basically, I would like that our DNS server to try to resolve the address. If it does not, check the server DNS Domain2. Is it possible, without questioning their DNS server for internet addresses (google.com, etc.)?
  Thanks and greetings

  Hello

  Welcome to the Microsoft Community Forums.

   
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
   
  Hope this information helps.

• Add the domain to existing emails

  Im trying to add an existing work email Thunderbird and I continue to be 'impossible to find the settings for your email. It is not a place to put the domain name, I need to synchronize the email from my iphone, I noticed. Is it my problem or where I can put the necessary domain name?

  No Thunderbird does not support active sync...

  Now you can answer the question. So, we can switch to a resolution. What is an exchange server? If this isn't what email provider?

• Problem with deleting old domain.

  I use a Windows Server 2008 R2, the following errors that appear in the Active Directory Domain Services role.

  Question:
  The emulator operations master primary domain controller in this forest is not configured to synchronize correctly valid time of a time source.

  Impact:
  If the master of emulator main domain controller in this forest is not configured to synchronize correctly time to a time source is valid, it can use its internal clock for the time synchronization. If the master of emulator main domain controller in this forest fails or is otherwise no longer available (and if you have not set up a time server reliable (GTIMESERV) in the domain root forest), other member computers and DCs in the forest will not be able to synchronize their time.

  Resolution:
  Set the PDC emulator master in this forest to synchronize time with a reliable external time source. If you have not set up a reliable time server ((GTIMESERV) GTIMESERV) in the forest root domain, set the PDC emulator master in this forest to synchronize time with a hardware clock that is installed on the network (the recommended approach). You can also set the PDC emulator master in this forest to synchronize time with an external time server by running the command w32tm/config /computer:WS2008R2-DC.relianceinfotech.net /manualpeerlist:time.windows.com /syncfromflags:manual / Update. If you have set up a time server reliable (fiable (GTIMESERV) GTIMESERV) in the forest root domain, set the master of emulator main domain controller in this forest to synchronize the time from the domain hierarchy forest by w32tm/config /update /computer:WS2008R2-DC.relianceinfotech.net running domhier root.

  and another question

  Question:
  The relianceinfotech.net field is that a single domain controller works.

  Impact:
  In case of failure on the domain only of the domain controller, users will be able to connect to the access or domain resources.

  Resolution:
  Add one or more additional domain controllers to the domain to manage authentication and authorization requests where there is a failure on the domain controller available unique in the field.

  the problem is that I don't have a relianceinfotech.net this area is the last and the area in which work now is relianceti.net. I just want to know how to solve that and remove these warnings of projection.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Errors, addition of Win7 workstations to the domain

  Greetings!

  I just started one already existing, although that paralyzed, installation of Windows Small Business 2011. Active Directory seems to be set up correctly, and I have no problems connecting to shared folders or devices by using the credentials of domain.

  However, when I started to unroll the field to the client workstations, I get the following error:

  

  I changed the map IPv4 settings to use the DNS on the PDC with the installation of Active Directory, but still no luck. I suspect the problem may lie in the search box on the DNS forward and as such have copied the text of output of dcdiag.exe/test: DNS:

  Directory Server diagnosis

  Perform the initial configuration:

  Trying to find the server at home...

  Home Server = BAF BAF in SR-1

  * Identified AD forest.
  Made the initial collection of information.

  Make the required initial tests

    
  Test server: Default-First-Site-Name\BAF-BAF-IN-SR-1

  Commencement of the trial: connectivity

  The host 883eda9b-b3d2-44e2-b2cd-c2df4c0241a6._msdcs. BAFF.local able

  not be resolved to the IP address. Check the DNS, DHCP, server

  name, etc.

  Received the error checking of LDAP and RPC connectivity. Please check your

  the firewall settings.

  ......................... BAF-BAF-IN-SR-1 failed test connectivity

  Primary testing

    
  Test server: Default-First-Site-Name\BAF-BAF-IN-SR-1

    
  Commencement of the trial: DNS

          

  DNS tests are running and not hung. Please wait a few minutes...

  ......................... BAF-BAF-IN-SR-1 failed test DNS

    
  Running partition tests: ForestDnsZones

    
  Running partition tests: DomainDnsZones

    
  Running partition tests: schema

    
  Running partition tests: Configuration

    
  Running partition tests: BAFF

    
  Running tests from the company: BAFF.local

  Commencement of the trial: DNS

  The test results for domain controllers:

             
  DC:-BAF-BAF-IN-SR - 1.local

  Domain: BAFF.local

             

                   
  TEST: Basic (Basc)
  Error: No LDAP connectivity
  WARNING: adapter

  Intel (r) [00000007] 2-82566DM Gigabit Network Connection has

  invalid DNS server: 192.168.1.175 (BAF-BAF-IN-SR-1)

  Error: all DNS servers are invalid

  No host record (A or AAAA) not found for this domain controller

  WARNING: no DNS RPC connectivity (error or Server non Microsoft DNS is running)
          
  Summary of the test results for DNS servers used by the domain above

  controllers:

          

  DNS server: 192.168.1.175 (BAF-BAF-IN-SR-1)

  1 break on this DNS server test

  Name resolution does not work. _ldap._tcp. BAFF.local. failed on the DNS 192.168.1.175
                
  Summary of the results of the DNS test:

          
  AUTH, Basc, Forw, Del, Dyn, RReg, ext.
  _________________________________________________________________
  Domain: BAFF.local

  BAF-BAF-IN-SR-1 PASS FAIL n/a n/a n/a n/a n/a
          
  ......................... BAFF.local failure test DNS

  Any help that can be provided would be appreciated. Admiteddly, this is my first DNS configuration completely on my own, so the error could be very obvious at this point.

  Thank you very much!

  Hi James,

  Thank you for your detailed answer, I appreciate your efforts.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your query in the TechNet Forums, since we support detected for the same thing:

  TechNet: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

  Thank you for your understanding.

• cRIO and 9234 modules do not work or communicate via fpga with accelerometers, fpga, connected to the real-time application is also related to shared variables related to modbus slave

  Hello

  I have a compact rio, which has a 4 way frame this chassis is the three modules of ni9234, they are related using FPGAs for application in real time, then using shared variables in the low-speed loop associated with a slave modbus to communicate with the domain controllers, the nor 9234 accelerometers linked to them with option ac coupled iepe on c modules , my problem is the real-time application seems to work well even when power loss occurs it restarts without problem and the fpga written hard disk portable bin files very well, but without an accelerometer connected I get readings of low noise as soon as I connect an accelerometer to one of the outputs 10 it just goes to a fixed number (0.03125) as soon as you unplug it again He returned to readout noise, I ran a scan on the modules and get only a spike when I connect or disconnect the accelerometer, I tested voltage at the pins on the module and I get 22 volts CC which makes it more likely that the material is not the problem, but software is perhaps the cause to hang up, I join the project and files for your perusal. I also realized a new project which, in mode directly linked scan has the module entry in the shared variable and the scenerio even once again. Help would be appretiated.

  Thank you very much

  Jason

  Whren using waveform with the 9234 acquisition, we recommend the following FPGA and RT model.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209114

  It can be extended as a datalogger with:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6388

  or using shared variables combined with the analytical engine

  http://zone.NI.com/DevZone/CDA/tut/p/ID/9851

  The FPGA in all this, as well as the framework of RT have used successfully by 1000s of users.  I recommend giving these a try.

• Windows 7 cannot resolve the ip addresses of domain names

  I have a desktop computer that I built components purchased in a major computer store.  I got this system works well for several months, now.  Recently, however, I met a problem with one of the modules of memory of 2 GB.  I deleted (because it turned out to be defective) and, shortly AFTER his withdrawal, have another problem with the resolution of Internet domain name.  I have to say that I also installed my old Windows XP as an alternative OS and updated to sp3 (it is, in fact, that I use to access the internet and write this query).  As you can see, XP I have no problem with internet access or name resolution.  There are two other systems connected to the home network via wi - fi (one equipped with Windows Vista and the other a tablet PC running Windows XP Tablet Edition) and none of them have no access to the internet problem.  I ran ipconfig/release and / renew without any result.

  I did all the following: netsh winsock reset catalog
  netsh int ip reset reset.log
  netsh int ipv6 reset reset.log.
  Still no access.
  I opened regedit and went to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and set the following registry value:
  Value name: IPEnableRouter
  Value type: REG_DWORD
  Value data: 1 (this is the only value I changed - from 0 to 1)
  I then exit regedit and reboot... still no access.  BTW: I noticed now that this entry (IPEnableRouter), nor any of its values, is no longer even exist in my registry.  I think it has something to do with my changing parameters of Cisco Linksys E1000 router to allow me access to my home network.  In addition, even if she says that I'm connected to my home network and the router, I don't see two other computers in the network, only the items that I share my desktop.
  I changed the "Preferred DNS server" to 208.67.222.222 as instructed in a possible solution I found on the web (in XP, of course) and, when it does not, changed to 208.67.220.220 instructions, but no.  Still nothing.
  I can access any Web site... IF I KNOW THE IP ADDRESS!  Unfortunately, my mind is not enough powerful or with enough RAM to remind all the IP addresses that I never go, not to mention every single IP address in the internet.
  If I had remembered to I have copied to Notepad (so I could then copy here) the results of an ipconfig/all command, but I didn't.  If this will help, let me know and I'll get it and post it.  I know that some errors I have received are 'Windows could not automatically detect the network proxy settings"and"registration of the DNS records failed.  The parameter is incorrect"and" an error occurred during the liberation interface Loopback Pseudo-Interface 1: the system cannot find the specified file. "
  Some of the results of an ipconfig/command all, I write down, such as those that came out as strange or maybe wrong.  They are as follows:
  Active IP routing: NO
  WINS proxy enabled: NO
  Host name: (empty)
  Suffix primary DNS: (empty)
  Node type: hybrid
  DNS suffix search list: News:[email protected] (Yes, I use Road Runner by Time Warner, and no, they were not able to help at all)
  Other results:
  ISATAP.KC.RR.com tunnel adapter
  State of the media: Media disconnected
  Card tunnel Teredo Tunneling Pseudo-Interface
  State of the media: Media disconnected
  Please keep in mind that all computers connected to this wireless router have no problem with access to the internet and this computer can access in Windows XP but not Windows 7.  In other words, is there anything wrong with the router and nothing wrong with the wireless network adapter.  Besides, I tried to reboot the router and even resetting (much to the chagrin of my other significant because she was not happy with not being able to access the internet until I was finally able to re - install the router)
  !).  I have also turned off my system, removed the card wireless adapter, waited for about 15 minutes, re-inserted in the PCI slot and return to market the system.  This, of course, did nothing, either.
  After the search for several days and trying various tactics and bugs as suggested all over the web, I'm at the end of my limited knowledge and patience with this problem.  Any help that will solve this problem and allow my Windows 7 to access, once again, the internet would be greatly appreciated.  As a last resort, I might have to re - install Windows 7, but I also read the posts where others have done so, but nothing helped. :(
  Thank you
  Lakusus
  The system configuration:
  Windows 7 64 bit Home Premium 32-bit of Windows XP Home Edition operating systems and in a dual-boot configuration
  Card mother ASUS M4A89GTD PRO series
  AMD Athlon (TM) II X 4 640 clocked at 3.49 GHz
  2.00 GB of RAM
  Linksys Wireless-G PCI adapt
  Graphics card XFX ATI Radeon HD 5750 card w/1 GB GDDR5 memory
  Two hard drives 1 TB SATA and a 250 GB HARD drive partitioned into a total of 10 discs
  Burner DVD HL-DT-ST DVDRAM

  In fact, I have since fixed my problem.  Believe it or not, it wasn't any major and detailed process.  It was a very simple thing that NONE of the resolutions on that I read even suggested might be the cause, so I don't even think to check it out.  Apparently, at any given time a week ago, or NAME of the COMPUTER, something erased my!  I forgot how I found this, but I think that I went to my device manager by double-clicking on the icon "Computer" and select 'Properties' and happened to notice that, under 'Settings of computer name, domain, and workgroup', the ' computer name: "and" full computer name: "fields were empty!

  SO, I clicked on 'Advanced system settings' on the left of the window properties, select the "computer name" tab (1st one at the top left of the window that has popped up) and down to "to rename this computer, click on change." I clicked on the button 'change... '. ».
  In the next window which displayed I got the name I initially chose for my desktop, clicked the button "More"... ' and 'News:[email protected]' in the ' suffix main DNS on this computer: "on the ground (as is my Internet service provider - others may be different) and ensured that the box"Change the suffix main DNS when the domain membership changes"has been checked.
  Then, I clicked OK on this window.  I then made sure that the "Working Group:" radio button was selected and typed "WORKGROUP" in the field below, then click 'OK '.
  Return to the window' system properties 'original, I clicked 'Apply' and 'OK' and then restarted my system.
  Windows 7 being loading, all of a sudden all these programs that were inactive for the past few days began to appear and load and update!  YAY! Laughing out loud
  So, the reason I went into detail about how I solved it is in case anyone else has this same problem, they can check and, if the computer name has also been deleted, follow these steps to correct the problem. Of course, you will need to contact your service provider (if other than the Road Runner by Time Warner) in order to obtain the primary DNS suffix.  I hope this will help others I do not go through the terror I lived not having access to the internet.  Aaaaarrrrggghh!  I MUST have my internet! LMAO

• Unable to join the computer Windows 7 the Windows Server 2008 R2 domain

  I'm at a complete loss here. I don't know if its something to do with this specific machine, or if something has changed on the side things server.

  A little history:

  I have joined two other machines to the domain about 3 weeks.

  Meanwhile, a machine has been infected by a ransomware. We completely removed all traces of infection of the machine network drives and mapped the proxy infected. The infected machine is used as a pointer for direct research. Could something have changed within the machine itself? Should I remove it?

  We have restored the mapped via a stored backup files.

  I do not know if somehow widespread infection among the mapped drives to records of service on the server itself change something along the way.

  Help would be greatly appreciated.

  Here is the NetSetup.LOG information.

  10/22/2015 09:45:33:892 -----------------------------------------------------------------

  22/10/2015 09:45:33:892 NetpValidateName: checking to see if 'redacted' is valid as type 3 name

  22/10/2015 09:45:33:992 NetpCheckDomainNameIsValid [Exists] for 'Redacted' returned 0x0

  22/10/2015 09:45:33:992 NetpValidateName: name 'Redacted' is valid for type 3

  10/22/2015 09:45:41:941 -----------------------------------------------------------------

  22/10/2015 09:45:41:941 NetpDoDomainJoin

  22/10/2015 09:45:41:941 NetpMachineValidToJoin: 'DOCTOR1-PC.

  22/10/2015 09:45:41:941 OS Version: 6.1

  22/10/2015 09:45:41:941 Build number: 7601 (7601.win7sp1_gdr.150928 - 1507)

  22/10/2015 09:45:41:941 Service Pack: Service Pack 1

  22/10/2015 09:45:41:941 SKU: Windows 7 Professional

  22/10/2015 09:45:41:941 NetpDomainJoinLicensingCheck: ulLicenseValue = 1, status: 0x0

  22/10/2015 09:45:41:941 NetpGetLsaPrimaryDomain: status: 0x0

  22/10/2015 09:45:41:941 NetpMachineValidToJoin: status: 0x0

  22/10/2015 09:45:41:941 NetpJoinDomain

  22/10/2015 09:45:41:941 Machine: DOCTOR1-PC

  22/10/2015 09:45:41:941 area: redacted

  22/10/2015 09:45:41:941 MachineAccountOU: (NULL)

  22/10/2015 09:45:41:941 account: Redacted\Doctor1

  22/10/2015 09:45:41:941 Options: 0 x 23

  22/10/2015 09:45:41:941 NetpLoadParameters: loading of registry settings...

  22/10/2015 09:45:41:941 NetpLoadParameters: DNSNameResolutionRequired not found, a default value of 0 x 2 '1'

  22/10/2015 09:45:41:941 NetpLoadParameters: DomainCompatibilityMode not found, defaulting to '0' 0 x 2

  22/10/2015 09:45:41:941 NetpLoadParameters: status: 0x2

  22/10/2015 09:45:41:941 NetpValidateName: checking to see if 'redacted' is valid as type 3 name

  22/10/2015 09:45:42:046 NetpCheckDomainNameIsValid [Exists] for 'Redacted' returned 0x0

  22/10/2015 09:45:42:046 NetpValidateName: name 'Redacted' is valid for type 3

  22/10/2015 09:45:42:046 NetpDsGetDcName: trying to find DC in domain 'Redacted', flags: 0 x 40001010

  22/10/2015 09:45:57:046 NetpLoadParameters: loading of registry settings...

  22/10/2015 09:45:57:046 NetpLoadParameters: DNSNameResolutionRequired not found, a default value of 0 x 2 '1'

  22/10/2015 09:45:57:046 NetpLoadParameters: DomainCompatibilityMode not found, defaulting to '0' 0 x 2

  22/10/2015 09:45:57:046 NetpLoadParameters: status: 0x2

  22/10/2015 09:45:57:046 NetpDsGetDcName: status check name resolution from the DNS A record for "Server1": 0x232b

  22/10/2015 09:45:57:046 NetpDsGetDcName: could not find a domain controller for the specified domain: 0xa8b, last error is 0 x 0

  22/10/2015 09:45:57:046 NetpJoinDomainOnDs: NetpDsGetDcName returned: 0xa8b

  22/10/2015 09:45:57:046 NetpJoinDomainOnDs: function exits with status of: 0xa8b

  22/10/2015 09:45:57:046 NetpDoDomainJoin: status: 0xa8b

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to stop the dsplay to change resolution size and icon when locking the PC with WIN + L?

  I have a problem with the 4-5 computers in our field.

  They are all randomly change resolution of 1920 x 1080 at 1024 x 768.

  Especially when locking computer wilt WIN + L to lunch for example.

  At the same time it changes the size of the icons.

  I've updated all the NVidia display driver.

  It's a Dell T3500 workstation happens on.

  We use Windows 7 Professional 32 bit Danish version

  IO have sought help on the internet, but not yet come to any usable solution.

  All suggestions will be useful.

  Hello Svend,

  Thanks for posting your query in Microsoft Community Forum.

  These computers are connected to the domain network, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• Possible for another user account different screen resolution?

  I would like to have the resolution of different screen for the account of another user on the same computer system.  I found that when I change the resolution, it applies to all accounts, so the customization doesn't really work in this sense.

  I know we can use Magnifier or enlarge the fonts or images on each screen by turning the mouse wheel while holding down the control key.  However, this is not good for someone just not good in computer but not disabled and it is extra work that the user has to do to be able to use the computer.

  You cannot change the resolution, but you can change the DPI. Go to the settings on the display page and increase or decrease the font size to the desired size. This is the workaround we use in our domain environment for users who want the largest size of the text.

  This is a per user setting.

• PIX has domain search?

  PIX a domain lookup "command"?

  Nope. The closest thing we have is the command name (static name resolution), but there is no support for dynamic name resolution at the moment. This is a feature that we are speaking for the next version of the code PIX (7.0 to be released towards the end of the year).

  Scott