Resolved - re-installation of Flex Builder 3 problems

Similar Questions

• Installation of Flex Builder 3 Beta beat Flash Player

  Hi, I just installed Flex Builder 3 beta today (OS X 10.4.10) and immediately found that Flash player has been is no longer detected by any browser on my system. When I run uninstall and then re-install the debug player or the standard player, I have the same problem - law on browsers, as if the player is not installed. I am a heavy user of Flex Builder 2 and so obviously it's a bit annoying... any ideas? Safari was accidentally opened during the installation process, but I think that it would likely cause the current installation to fail, not install it all future...
  
  Thank you
  Erik

  I could solve my problem by changing the solution proposed by this technote.

  The technote identifies a permissions problem with the repertoire of components of non-Safari browsers. In my case, the problem not permissions seems to have been in the directory/Library/Internet Plug - Ins. What tipped me off to the solution was the fact that, after manually removing Flash Player.plugin and flashplayer.xpt from/Library/Internet Plug - Ins directory, subsequent attempts to install Flash Player, gave rise to the "creating file: 1008:5,-5000 access denied error ' I remembered seeing in the technical note. Before you delete these files, Setup would fail silently, perhaps because he has seen the files that it would install already living in the right place and also had no permissions to change the directory.

  In all cases, by the permissions change recommended in the technical note in the directory/Library/Internet Plug - Ins, I was able to install the plug-in, which gave me new access to Flash content in all my browsers.

  Hope this is useful to someone else...

  -Erik

• Open a project on another installation of Flex Builder 3?

  My colleagues in Flex Builder 3 trial has expired, so until the next beta or license must be approved, I need to open its project in my installation. However its expired before he could make an export and I see no option for just opens a project directly.

  Quote:
  Posted by: Gheorghe Blanariu
  Have you try to copy the project folder (by default it is in the workspace) on your computer and then import it with the import of-> existing projects into workspace?

  Import seems to want a zip of a project that was exported. Guess I could try just zipping upward a project.

  EDIT: Ah, you're right. The import option was not apparent at first glance. Thank you.

• Flex Builder 3 problem

  I use flex builder 3 on vista 64-bit, and when I go to the project properties and select Flex Modules I get:
  http://img91.imageshack.us/img91/1645/flexbuilder3problg4.jpg

  Fixed by the closure of the logitech setpoint software: s

• Error during installation of Flex Builder

  "the application failed to start because framedyn.dll was not found.
  
  It appears several times during the installation on Windows XP SP2. I found a solution online and I replaced the dll in \system32, but that did not help. As a result, FB will not work. Is there a solution? I don't even see the dll mentioned in the knowledge base.

  I uninstalled and stop processes on the computer. Then I reinstalled, and the process terminated normally.

• CFB installed to existing Flex Builder - can't see CF perspective

  Hey all.  I installed Coldfusion Builder as a plugin of my existing installation of Flex Builder 3.  However, when I try to open a new perspective, Coldfusion is not listed.  I tried autonomous and it installed ok, but I would like to be able to switch back and fourth within my current Flex Builder.  Anyone have any ideas?

  Thank you

  Hello

  From now ColdFusion Builder is not supported in Flex Builder 3.

  You can install it as a plugin on Gumbo however.

  -Bhakti

• Flex Builder Alpha 2 installation problem

  Hi all
  
  I have the Flex Builder Alpha 2 installation problem on my Fedora 8 64-bit. Basically, as soon as I click on the license agreement, the installer says "Please wait, Adobe_Flex_Builder_Linux is configured for your system. This may take a moment... "and then no progress at all. There is no error on the console. Someone knows how to fix this?

  Finally I discovered that I could not install the Flex Builder because my system is running IcedTea 1.7 x86_64. Once I turn it on to another Java (1.5.0 - gcj), the Setup program works like charm. I guess that's because the installation program stops somehow when running on IcedTea.

• Problem in Flex Builder user interface after installation of Flex 3

  So, here's an interesting question. And my apologies in advance if it has been reported before. But I spent the greater part of two days, installation / uninstallation / cleaning / resettlement. However, still having the problem with Flex Builder 3:
  
  After the launch of Flex Builder 3, I create a new project and "right click" on the name of the project in the browser in Flex in order to launch the 'Properties' dialog box. " Tab property page resource, various fields are truncated and drop-down list boxes are all jacked. In fact, under the Flex Build Path tab, it is completely empty. Basically, throughout the Flex Builder IDE, I have various missing fields or bizarre behavior.
  
  Then... at this point, I've pretty much uninstalled, uninstalled the JRE (think this is related to java), cleaned the system registry, uninstalled flash players, edited the flexbuilder.ini with one "-clean", installed updates for Vista (so now this system is on SP1) essentially... I have everything humanly possible short of formatting the system again.
  
  Running Windows Vista x 64; 8 GB of RAM; NVidia 8800 video card.
  
  To make sure that I wasn't completely lose my mind... I installed on a portable system and everything ran like a charm. Thus, after traveling through these forums and Google the issue to death... I can't find the answer.
  
  If anyone can help me it would be much appreciated!

  You're probably also using the logitech SetPoint on Vista x 64 drivers, who have a known conflict with Eclipse 3.3.

  (The 'solution' is one) to get rid of the drivers (but I love my DiNovo Edge keyboard!) or Eclipse use b) 3.4M4 and the plugin. However, it is not entirely taken in charge, so they sometimes issues, especially with design mode, so generally I use FB3 and switch and then run away when I need to change a setting (not optimal, I know, but not as frequent as that, once a day on average for me). Or just edit the parameters with a text editor.

  Or (c) perform virtualization VMWARE etc. and do it all in x 86.

  (Mise en garde, je n'ai jamais essayé un) personally, but have read that it works.)

• Installation of Flash builder 4 has somehow broken my launch of running/debugging/profiling of flex builder 3.

  After installing Flash builder 4 neither to him nor to flex builder 3 has been able to launch flex swf:s. After hitting to run or debug flex gives a prompt saying "Flash Player is not found. Flex builder cannot locate the required version of Flash Player. You need to maybe install Flash Player 9 or reinstall Flex Builder. Do you want to try to run your application with the current version? ». The popup itself happened before the installation of flash builder 4. But normally I would hit just Yes and he would use any flashplayer is default.

  Now, if I click Yes it launch command prompt with a path to the installation folder of flex 3 Builder. When running flash builder 4, same happens except the path is the folder of installation of flash builder 4. Flex then begins waiting for connection of the debugger, and after awhile, he invites a timeout message. The title of command prompts is... \workspace\project\bin-debug\filename.swf.

  When you open the SWFs directly from windows, they open fine.

  I used the uninstaller for flash player software and recovered both fp9 & 10 and reinstalled the. That did not help. When we browser everything works fine, the problem occurs only when you launch standalone player. I tried to check the registry settings if there is something wrong, but all the flashplayers paths seem to be ok.

  Is there another hope to solve this problem than to reinstall flex builder 3 and flash builder 4 from scratch?

  You need content installed FP debugger

  http://www.Adobe.com/support/flashplayer/downloads.html download from here and install it and you should see the problem go away

  Download the Flash Player 10 ActiveX Windows control content debugger (for IE) (EXE, 2.03 MB)

• Flex Builder 3 - no installer on the disk?

  I just got my Flex Builder 3 mailed today

  I open D: / but I do not see any installation or install files. The Flex builder folder has a FB3_Win and a FB3_Plugin_win are one of these it?

  Yep, FB3_Win is the standalone version, and the other is the plugin for Eclipse (in case you have Eclipse already installed for Java development or something).

• Connection problem with the database, the closure of Flex Builder

  Hello

  I developed a web page that connects to a database, reads data and it shows on the screen. I use HTTPService to connect to a php server that supports MySQL data. Everything is OK when I run the Flex Builder web page, but when I run the page doing double click on the file released .html the connection fails and the program generates this error:

  [RPC Fault faultString = "" error #2028: file:///Q:/2009-08-05-1330FinalFrontEnd/bin-release/FrontEnd.swf SWF file with Local file system cannot access Internet URL http://localhost/Test2/Test2.php. "faultCode ="InvokeFailed"faultDetail ="null""]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http.mxml::HTTPService/ http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http::HTTPService/send()
  at mx.rpc.http.mxml::HTTPService/send()
  in FrontEnd / submitLabelsQuery)
  in FrontEnd / updateLabels)
  in FrontEnd / ___FrontEnd_SetEventHandler5_handler)

  Does anyone know how can I use the web page without using Flex Builder?

  More information:

  I use Flex Builder 3 to the development of the web page and WampServer 2.0 for the connection with the database.

  Thank you

  Onditz

  Hi Onditz,

  Previously, I also faced the same problem when working with Php as the Backend, the problem is that Flex does not call your PHP page

  It is the way I solved it to export your Flex Project at Flex Release Build.

  Right click on the export of project---> Flex project---> Release Build---> copy all the files on your server where all of your PHP files are and then call the application from the browser

  http://localhost/test2/sample.html. »

• Gumbo in Flex builder 3: could not resolve to component < FxApplication > implimentation

  Hi all

  I was hitting my head on the keyboard on this issue for a while. I downloaded and installed successfully 2 separate versions of every night Gumbo Flex SDK 4.0.0.6831 and 4.0.0.6898 (two versions because I had initially assumed that the error was a bug every night). I set the compiler Flex uses the 4.0.0.6898 new build and changed require the version of flash player to 10.0.0.  Put everything right?

  so I put this:

  " < application xmlns =" http://ns.Adobe.com/MXML/2009 "layout ="absolute"> "
  < FxButton label = "Hello World" / >
  < / application >

  and get the compile error: Gumbo in Flex builder 3: could not resolve to component < FxApplication > implimentation. I tried everything: < Application > changed spaces names and much more. Any other ideas?

  Thank you in advance - brandon

  Try something like this:

  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/halo" >
     
  

• Flex Builder 3 plugin question extracted Installer

  I downloaded the Flex Builder 3 for Windows plugin today and tried to run in. The InstallerAnyWhere has a popup saying "Please select another location to extract the installer to" but anywhere on my system file I select it still maintains the same question. Only option is to cancel the installation at this point. Anyone know when this will be fixed?

  It seems that our corporate firewall corrupts the download. I have access toa version someone downloaded home and that worked correctly.

• Annoying problem with flex builder 3

  Some time ago I had this dialogue and checked the box "remember my decision" like this:

  http://www.Adobe.com/devnet/Facebook/articles/build_your_first_facebook_air_app/fig22.jpg

  I clicked 'Yes' and he remembered but now I don't want to open the Flex debugging perspective when it suspends. However I no longer get this dialog box and thus the ability to change my decision. Flex Builder prefs/help is terrible how can I change that now?

  Hello

  In the main menu, select

  Window-> Preferences-> run / debug-> Outlook

  In the [Debug] Dropdpwn option, select None. Click OK. Put yourself in your Flex development perspective. You'll get the prompt when you debug.

  Anne-Marie

• Flex Builder 2 - project CF problem

  Hi all
  
  I cannot create a project in Flex using ColdFusion Flash Remoting Service as server technology...
  
  I just installed both ColdFusion and Flex Builder...
  
  I create a new project from scratch and select the ColdFusion Flash Remoting Service as server technology. Then, I get the following error:
  "Invalid server root. The server root must contain a WEB-INF/flex folder.
  and can not continue... I have a wwwroot/WEB-INF structure with no flex record...
  
  any suggestions as to why? or what / where I have gone wrong?
  
  Kind regards
  Jon.
  
  

  Looks like you don't have the 7.0.2 update applied to ColdFusion. You can check this in your ColdFusion administrator under the "System information" link at the top. You want a version under "Server Details" that looks like 7,0,2...

  If you need to get the update, you can find it here