Resource file path

Similar Questions

• error message "missing resource file imaqdx.rc.

  With the help of LV2010, returned to a PC that has been used for a while access to some old programs of vision. On the block diagram, the property IMAQDX node is disconnected and when loading the file, I get a message that says: "lack of resource file imaqdx.rc.

  Suggestions?

  For anyone following this discussion, I have solved the error message, but only by removing all related AND then put it back. A major PITA!

• Failed to save the UI resource file...

  Hi all

  I have to pass a CVI 6a 2013 CVI.

  After working the binding DLLS/LIBs now everything compiles and links fine and the exe works as expected.

  But there are some users that I have to edit resource files. As soon as I open one of them (a few seconds) or when I want to change one little thing, and then save the file I get the error message next message (see attachment):

  Unable to save the user interface resource file '... uir ' (the file is not a user interface file or damaged)

  What is the problem and how to solve?

  Any idea is welcome.

  Best regards

  Andreas

  Hi all

  Thanks for your ideas.

  I oversaw that effort to push the standard of the button Save of the cvi after I clicked away the strange error messages.

  Strange but true: If the IUR files are saved now (in the appropriate format) and error messages no longer appear.

  I think that there is a small bug (or format or any change...) in 2013 CVI when overtaking of the UIR of CVI 6 files.

  Good day.

  Andreas

• How to give a default file path

  Hi all

  How to give a default path for a vi... It should take path to the deffault d without a prompt and writing the desired string to this place... I gud get default file path option... but later realized that there is no file created in this place

  Thank you

  Here you go...

  Sorry I made the error I said others...

  The VI attached is in LV 8.0 (so that only I could save)...

• control file path of strength left in fact justify text on path

  I often find that the paths of files displayed in the file path controls are too long and gets truncated. Problem is that the right side of the lane becomes truncated and one may say is more this file was not selected.

  

  I'd rather largely aligned left the path so that the left side of the path is truncated and the name of the file is visible.

  

  I bet that there is no reasonable way to do it. Please prove me wrong.

  Thanks in advance,

  -root

  I just played around with the property "Text.ScrollPos". The wire just a number high enough to him and he will give you everything you want.

  Have fun

  Guenther

• Popup 'Select the file path' block 'Open the file' vi

  When popup 'Select File Path' by clicking on the "browser button", vi "Open file" will be blocked.

  I found when I tried to select a file in popup "Select path", the newspaper system stop recording.

  Is this true?

  Any suggestion? (This will help if the vi for the syslog for the readmission of the value). I need the newspaper to keep on going even when someone clicks and the path of the file browser popup.

  Thank you.

  
  

• TestStand 4.2 string not found error in the language resource files

  I installed the TestStand 4.2 on two Windows XP computers.  On a machine it worked fine first time. On the other machine, I get the following message if poster in the login box and also in the component models: ' String not found in language resource files. "I tried uninstalling and reinstalling TestStand twice but you still get this error.  This error is preventing me from being able to log in as administrator, so I am unable to use TestStand 4.2. I understand that these language resource files are supplied by the installer, but for some reason, it seems that the machine with the error cannot locate these.

  The only difference between the two XP machines I can find is the location of user profiles.  I note that on versions of TestStand compatible Vista, that TestStand user settings are stored in C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2\Components on XP machines.  On the XP machine with the error all the user profiles are stored in C:\profiles, instead of C:\Documents and Settings.  This is the standard profile used by our company so I am not able to change that. TestStand Setup recognizes this and install for C:\profliles\All Users\Documents\National Instruments\TestStand 4.2\ TestStand user parameters.  Does anyone know if the location of user profiles is important, or if there is another cause of this error?

  Kind regards

  David

  David-

  The cause of the channels being found is probably at the first launch of TS, the language files are not found. The language files contain default values, and these values are kept as actual values during the recording of the configuration files. For example, the default administrator name and the default folders in the Insert palette. I would recommend that you delete the file Users.ini and Templates.ini in the configuration directory and this should address your current behavior. I don't know why the connection appeared a problem because I was able to use the blank password on the user 'String not found in language resource files. If you still have problems with the connection, let us know.

  You remember something unique about how you came to this situation that caused this to happen?

• LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW

  Hello.

  I used labview to make an assignment of the University. As part of the im supposed to transfer the .vi file to my teacher, but all .vi files sent using the e-mail system are corrupt. When I try to open mine it gives this error

  LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW

  Unfortunately, I also lost my backup as I was working on a lab computer and didn't upload my files on the storage server.

  So I was wondering if someone can help out me. Thank you very much.

  The problem is that the email system dealt with the file as a text file. All thesequences have been replaced as . You can see this opening of VI in a hexeditor. Each VI begins with "RSRC".". Your VI begins with "RSRC.

  I replaced the two occurrences of "RSRC"with "RSRC"."and he opened in LV 8.6. Missing just a few controls and subVIs.

  I did this on Windows.

• You can put the date into a file path?

  My program written spreadsheets. I want there to be a new file daily, entitled the days date, then the data added to the end of the day. Is any way to get the date issued by a ' get Date / Time String "and put in the path to the function"write the spreadsheet"?

  As is - anyone can confirm that a file path in a file writing worksheet is to open the file and one to come is saving and closing?

  See you soon

  Sam

  This better?

  

  As red Rooster have already said, use vi "string of Format Date/time" to not prevent elements of DateTime stamps that you need and also to choose appropriate delimiters.

  Keep in mind that ' / '&': ' are not allowed in Windows file names!

  Also to keep track of all your files in a folder, it is best to name your files 'Year-month-day"instead of the standard ' Monyh/day/year' (for Europeans at least ). This way you can easily find any file in a folder larger.

  You have really two different folders? One of the files before noon and the other for files after noon?

  If so keep this code.

  If not, modify this code!

• Errro message "cannot copy file: path is too deep.

  Inequality on the what, why, how do to the error message "cannot copy file: path is too deep." I would like to know the causes and possible prevention and or all of the information available on this issue. The problem occurs when copying large files and sometimes small files on external hard drive to the top.

  Even though the file itself may become a 9-character file name extension, it could be buried inside several files.  Thus, when you step on your external USB drive and it appears as, say, M: drive, the number of characters in the complete path to the file starting with "M:\. "and including all of the directories in the path to the file as well as the number of characters in the name of the file itself must not exceed 255 or Windows refuses to handle.

  Robocopy is a command line program.  You must type in the command from a command prompt window (start-> Run-> "cmd").  It works by accessing the file using a set of routines to copy the different library that does not have the limit of 255 characters.  A documentation file must accompany Robocopy explaining how to use it.

  Another method that might work for you is to take the folder that your .wmv file is in (or maybe both files above) and to temporarily move to the root directory of your external hard drive.  This shorten the path to the file and allow a normal copy of work.

  HTH,
  JW

• Asking the user to select a file path to record data to

  Hello

  To improve the 'user interface', and the usability of my VI, I would like to have the dialog box "select file path" appears automatically, rather than create a user by clicking on an icon on the front panel to display the path of the file dialog. The 'order' of operations would be as follows:

  VI implementing--> Dialogue request to the user the name of the file--> VI adds automatically it appropriate extension--> traditional dialog windows 'save file' opens to allow the user to select the appropriate folder to save the file in--> rest of VI runs.

  I have everything other works independently to obtain registration of the file dialog is displayed automatically. Currently, the only way I can do that is to have the user to select the folder to save ahead to launch through the façade, but would like to remove this step and as soon as they clicked 'OK' on the previous dialog (file name request) have the "Save file/select the folder" dialog appear.

  Thank you

  I think you are looking for the file Express VI dialogue. Be sure to post if this isn't what you're looking for.

• Why some items in 'Open an existing project' have just the name of the project and others have access to the entire file path?

  I have SP1 2012 LabVIEW and on the main screne of LabVIEW selecrt "show projects".

  Why some elements of 'Existing Open' (project) have just the name of the project and others have access to the entire file path?

  Examples of two lines in the list of projects.

  Ping.lvproj (with a path: C:\Users\mlevine\Documents\MPCE EQT\EQT Software\Ping.lvproj)

  C:\Users\mlevine\Documents\Common package Mission trainer (CMPT) \SUW Surface Warfare\Weapon permission Panel (WAP) \WAP LabVIEW Software\WAP fire authorization server 28 April 2015

  No chance, it's because I made a copy of this software and stored on a network drive power off and it went out of this network drive?

  So if LabVIEW sees two or more versions of the same software, he decides to use the name to differentiate between full path?

  I'd still rather it shows just the name of the project and if you hover over the name it shows the full path.

  Thank you

  Mark

  If you have opened a project of the same name from a different location, it is when it shows the full path both - in this case showing just the name of the project would not help because it would be the same thing!

• Cannot copy #BSSC: cannot find specified / file path.

  Recently, I got my data from formatted hard drive and it to stored in my partition active, but I'm unable to copy data from one place to another place, and it shows the same error message I wrote on the start menu. Can someone tell me how to fix it!

  Cannot copy #BSSC: cannot find specified / file path.

  Hello Leal,

  This problem can occur because the file path / you are specifying no longer exists. This means that the destination on your computer folder no longer exists even if it is displayed in Solution Explorer.

  To resolve this problem, use one of the following methods:

  • Recreate the folder on your computer and then copy or move the file to the folder.
  • Copy or move the file to another folder on your computer...

    Let us know if that helps.

    Marilyn

• System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe"on Windows 8.1

  I've updated my OS to Windows 7 64-bit edition of Windows 8.1 pro 64-bit, and when you try to reinstall the software and the driver for my printer HP Officejet J4580 all-in-one I get all sorts of errors. It worked perfectly on Windows 7.

  I get the most common error is: System cannot find the specified file "[path]" \hpzshl.ice_suffix.. ". exe', as well as the facility is abandoned.

  I tried a lot of solutions from the HP Web site and these forums, but my problem is still there.

  I already tried the long solution presented here:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/install-error-quot-the-system-cannot-f...

  and

  http://support.HP.com/us-en/document/c04206080

  I even found the directory where installation has been decompressed and copied to the desktop, but the error persists.

  I need the complete software because I need to use my printer Officejet scanner, so I can't just simply print drivers.

  I need desperate help on getting this new work.

  Specifications of the computer:

  CPU: Intel Core i7 - 4820 K Quad-Core 3.70 GHz 10 MB Intel Smart Cache LGA2011

  : DDR3 memory / 1866 MHz Quad Channel 16GB (4GBx4)

  Printer: HP Officejet J4580 all-in-one; connected via USB

  OS: 8.1 Pro 64 bit Windows

  GPU: AMD Radeon R9 200 series

  I finally solved it by myself after many hours of pain.

  I clean any installation of HP from my computer using the HP Officejet software and driver removal utility:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-110151-1&cc=us&DLC=en&LC=en&OS=4158&product=3645100&sw_lang=

  After the computer restarts, I moved on the desktop, the installation directory unpacked that HP printer install wizard for Windows had previously downloaded and launched.

  I deleted all files in the directory %Temp%.

  I disabled McAfee antivirus real time and Windows Deffender analysis.

  I ran the setup.exe in the installation directory in my office.

  The installation is smoothly and completed. I have already tested the printer and all features function normally.

  I hope these steps help someone with similar problems to get the software installed.

• Then right-click on a program get error message in the PSD Shell extension resource file < C_PsdRsDll > not found

  Original title: lost file PSD Shell Extension

  When I right click on a program of an error box appears, PSD Shell extension resource file not found... What can I do to fix this?

  Hello

  1 does with a particular program, or with all programs?

  2. don't you make changes to the computer?

  3. What is the brand and model of the computer?

  Clean boot

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.