restart becomes a headache

Similar Questions

• Gel iPhone... !

  I am facing problem with my iPhone on gel, it stops abruptly by acting and just gel util I block and unblock again

  I tried hard reset and restore all but the problem remains the same

  Please gave me some tips how can I solve this problem, because it becomes a headache for me now. Thank you!

  IPhone-6

  software update 10.0.2

  Hello Has1710,

  Welcome to the communities of Apple Support!

  I see that your iPhone is icy and stops working unexpectedly. You lock and unlock the iPhone, and then he answers. Also, you did a restart of the force and restored, and remains the same question. We appreciate certainly take you time out of your day to contact us about this, and I am sure that you are ready to get this resolved.

  You mentioned that you have restored. You have restored to factory settings? If this isn't the case, let's go and save the data to your iPhone (if you haven't already done so) and restore settings to see if you get the same problem after that. Restore factory settings removes all added applications and software on the iPhone which could be causing a conflict.

  The following articles will help with this:
  The backup of your iPhone, iPad and iPod touch
  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please let us know if that helps.

  Best regards.

• Pavilion 15n208tx: caps lock flashes

  I use a computer hp laptop pavilion 15 n208tx of 1 and a half, it was perfect pc hp for me until this problem arised. When I press the laptop power button displays the wifi for the f12 screen white button on and caps starts blinking, caps lock flashes for about 12 times, exactly 12 times and then restarts again. and the laptop remains in this state until it starts itself after about 1-2 hours. I'm having this problem for about 2 months. Earlier, it was not so bad but now there has become a headache.

  Guys please help me, what should I do...

  I googled a lot, but it was in vain. My bios version is f.67

  Some have said that it is a bios problem so I tried to downgrade my bios but f.67 is not downgradable.

  Please someone help me. I'm really messed up man.

  This should help:

  http://support.HP.com/us-en/document/c01732674

  also

  http://support.HP.com/us-en/document/c02222922

• Crazy permissions with windows problems 7

  IM at my wits end with this operating system. My computer has some pretty bad permission problems that seem like they can be fixed at all. So far, I've used the CMD lines that are supposed to give you all the permissions of your whole HARD drive... Failed. I chose manually the files and folders to take possession of the... Failed. I used CMD to allow me to use the system administrator account... Impossible that this account had the same exact problems than the one I had used. I followed the General instructions to set an account as the system administrator... failed. I used the registry tweak that allows you to request any folder permissions and spent 3 hours, let take complete control of my C: /... Has no... Nothing seems to work, I'll still meet issues EVERY TIME I try to uninstall, install or upgrade almost any file. Now my Appdata folder seems to have taken a full * and now all files in the folder are inaccessible and gives me an error saying that to make sure that the file is still there and I can access it. This computer becomes a headache huge machine/Clipboard. IM about an inch to completely delete the OS and do a fresh install (again...). Is there something that can be tried other than the fixes I've tried. Thanks in advance

  Hello

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your Windows installation media if there are corrupt or missing files

  How to use the System File Checker tool to troubleshoot missing files or damaged in Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If you are satisfied with System File Checker cannot fix the files, you will need to reinstall Windows OS.

  Then, re - open CMD window

  Type chkdsk /F /R

  Press enter

  You will see a message about the volume must be locked and you want to start scanning reboot?  Press y and press enter

  Restart the computer to start the scan

  You will find the scan log in the event viewer > Windows Logs > application log

  Search Winninit

  Follow these steps to reset the file/folder permissions

  Solve installation errors using the SubInACL tool to repair the file and registry permissions

  http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

• values of the Spooky object! Help me im lost and stupid and then some... (not for the faint of heart)

  
  LS,

  This includes the code and some traces of output.

  I tried this for 2 days and it me stupifies.

  I'll elaborate:

  There is a game object, is an object of dictionary containing a screen/name of the index tile_x_y tile

  So I can look it up using x and y coords.

  Contains the object lost things, but in this particular case: x, y, width, height, xtile, ytile (explicit I guess) & xmove(1), ymove (-1.0.1 according to the)

  direction.)

  So, now that these objects move around the screen (Yes it's just a game) and check if they hit the limits of the screen and if they try to pass on the tiles that are busy/no

  traversable.

  It goes very well for most but sometimes objects, or for some objects (no idea why and it changes when you restart), halfway to check limits, internal object x and y

  values go ballistic and I find myself with a reference to the Dictionary object error because tile 30 280 just does not exist.

  What happens is the following (in pseudocode, the actual code is shown below):

  For each object

  Testbounds (Object)

  end for

  Testbounds

  If diry = - 1 (high)

  If (checkbounds (up) == possible)

  change ob.x and ob.y //move coord

  on the other

  If (not possible at all)

  move to the edge of where it can go on the same tiles

  change ob.x, ob.y coord

  on the other

  move a bit in the other possible meanings

  change ob.x, ob.y

  end if

  end if

  end if

  ...

  ... make for y dir = 1, x = 1, x =-1

  ..

  convert new ob.x and ob.y to put the coords / / = divide x and y values by tilesize

  .. Search tile_x_y and see what it is

  BOOOM!     This is where the error occurs because half the x checkbounds and there, or value gets to large, by a factor of 10 if I read the traced output

  But why?

  theres no manipulation on the object in the testbounds function which could cause what I can say.

  But it's far enough because it happens

  Note: if I change the height value object and the width to a value less as divide by 4, that doesn't happen? then only the graphics overlap the not traversable

  graphic on-screen mc because effective width and height are 4 times bigger. Sorta, it spoils everything.

  So here is the plotted output (that's a lot, but I was sick of not finding the bug)

  I first cut out the part where he's going, enter the code that his execution at this time

  Below I have will all stick out of traces and more still of the surrounding code.

  In addition, given that you've read this far, thank you very much, you have my respect and grattitude.

  I'm ashamed to ask this, but ive been watching you for 2 days now and it illudes me. Also im getting blindness code so I don't see now if he was sitting in

  in front of me without a bra.

  Here it is:

  1stmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 408 21 8 48 6 48 48 1 - 1

  1032 = x, y = 408-> tile will be x 21 y8

  
  2ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 408 21 8 48 6 48 48 1 - 1
  cbparsx, 1032 414 y:

  checkbounds1, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height,: root1 1032 408 21 8 48 48 instance323
  checkbounds2, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height,: root1 1032 408 21 8 48 48 instance323
  checkbounds3, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height,: root1 1032 408 21 8 48 48 instance323
  checkbounds4, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height,: root1 1032 408 21 8 48 48 instance323
  checkbounds5, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height,: root1 1032 408 21 8 48 48 instance323
  endcheckbounds, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height,: root1 1032 408 21 8 48 48 instance323

  2bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: 408 1032 instance323 21 8 48 6 48 48 1 - 1

  
  (^ - last correct values)

  all of a sudden! : x = 1032 and y = 3840 (the tilex internal and there are recalculated at the end to keep them the same so far)

  2cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: 1032 3840 instance323 21 8 48 6 48 48 1 - 1

  
  (^ - what I'm telling you)

  n.b.:!) 3840 = (408-24) * 10 (which is x coord-half the tilesize) just does not know where the * 10 comes?

  Executed CODE between these lines of trace:

  trace ("2bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);

  } else
  {
  If ((! ob.downleft & &! ob.downright))
  {
  OB.y = (ob.ytile + 1) * tilesize - ob.height;
  }
  
  trace ("2cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);

  END OF THE CODE

  so: it is located here-> ob.y = (ob.ytile + 1) * tilesize - ob.height;

  It can occur if: tilesize - height was somehow * large 10
  but looking at the trace values is not.

  again become a headache

  That's about it. Below follows the trace output that was produced and all executed code between where he was right and wrong.

  Bless you for reading this far.

  Which is higher

  Mac

  1stmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 408 21 8 48 6 48 48 1 - 1
  2ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 408 21 8 48 6 48 48 1 - 1
  cbparsx, 1032 414 y:
  checkbounds1, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 408 21 8 48 48 instance323
  checkbounds2, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 408 21 8 48 48 instance323
  checkbounds3, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 408 21 8 48 48 instance323
  checkbounds4, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 408 21 8 48 48 instance323
  checkbounds5, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 408 21 8 48 48 instance323
  endcheckbounds, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 408 21 8 48 48 instance323
  2bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 408 21 8 48 6 48 48 1 - 1
  2cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 3840 21 8 48 6 48 48 1 - 1
  3ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 3840 21 8 48 6 48 48 1 - 1
  cbparsx, 1026 3840 y:
  checkbounds1, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 3840 21 8 48 48 instance323
  checkbounds2, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 3840 21 8 48 48 instance323
  checkbounds3, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 3840 21 8 48 48 instance323
  checkbounds4, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 3840 21 8 48 48 instance323
  checkbounds5, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 3840 21 8 48 48 instance323
  endcheckbounds, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry: root1 1032 3840 21 8 48 48 instance323
  3bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1032 3840 21 8 48 6 48 48 1 - 1
  3cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1056 3840 21 8 48 6 48 48 1 - 1
  4ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry: instance323 1056 3840 21 8 48 6 48 48 1 - 1
  beforeobx, oby: 21 8 1056 3840
  afterobx, oby: 22 80 1056 3840
  followed takable: 3t_80_22
  TypeError: Error #1010: a term is undefined and has no properties.
  at FruitGamev5_fla::MainTimeline/moveNPC()
  at FruitGamev5_fla::MainTimeline/cleverAI()
  at FruitGamev5_fla::MainTimeline/enemyAI()
  at FruitGamev5_fla::MainTimeline/updatestuff()

  function {moveNPC (ob dirx, diry, obspeed, type)}
  
  var movespeed:int = obspeed;
  var movedit:Boolean = false;

  var axm:int = 0; real x and there moves
  var aym:int = 0;

  control of collision movem
  //
  If (ob.x > 2000 | ob.y > 2000)
  OB.clip.filters = [mColorMatrixerror];
  
  trace ("1stmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (diry == - 1).
  {
  checkbounds (ob.x, ob.y + movespeed * diry, ob);
  trace ("1bstmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (ob.upleft & & ob.upright)
  {
  OB.y += movespeed * diry;
  movedit = true;
  aym = diry;
  } else
  {
  If ((! ob.upleft & &! ob.upright))
  {
  OB.y = ob.ytile * tilesize + ob.height;
  trace ("1cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  }
  on the other
  {
  movedit = false;
  aym = diry;
  If {(ob.upleft)
  
  OB.y += movespeed * diry;
  OB.x = movespeed;
  }
  If {(ob.upright)
  
  OB.y += movespeed * diry;
  OB.x += movespeed.
  }
  }
  }
  
  }
  trace ("2ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (diry == 1 & & (! movedit | ob.freemove)) {}
  checkbounds (ob.x, ob.y + movespeed * diry, ob);
  trace ("2bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (ob.downleft & & ob.downright) {}
  OB.y += movespeed * diry;
  movedit = true;
  aym = diry;
  } else
  {
  If ((! ob.downleft & &! ob.downright))
  {
  OB.y = (ob.ytile + 1) * tilesize - ob.height;
  trace ("2cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  }
  on the other
  {
  movedit = true;
  aym = diry;
  If {(ob.downleft)
  
  OB.y += movespeed * diry;
  OB.x = movespeed;
  }
  If {(ob.downright)
  
  OB.y += movespeed * diry;
  OB.x += movespeed.
  }
  }
  }
  }
  trace ("3ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (dirx ==-1 & & (! movedit | ob.freemove)) {}
  checkbounds (ob.x + movespeed * dirx, ob.y, ob);
  trace ("3bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (ob.downleft & & ob.upleft) {}
  OB.x += movespeed * dirx.
  movedit = true;
  AXM = dirx;
  } else
  {
  If ((! ob.downleft & &! ob.upleft))
  {
  OB.x = ob.xtile * tilesize + ob.width;
  trace ("3cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  }
  on the other
  {
  movedit = true;
  AXM = dirx;
  If (ob.downleft)
  {
  
  OB.x += movespeed * dirx.
  OB.y += movespeed.
  }
  If (ob.upleft)
  {
  
  OB.x += movespeed * dirx.
  OB.y = movespeed;
  }
  }
  }
  }
  trace ("4ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (dirx == 1 & & (! movedit | ob.freemove)) {}
  checkbounds (ob.x + movespeed * dirx, ob.y, ob);
  trace ("4bndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (ob.upright & & ob.downright) {}
  OB.x += movespeed * dirx.
  movedit = true;
  AXM = dirx;
  } else
  {
  If ((! ob.downright & &! ob.upright))
  {
  OB.x = (ob.xtile + 1) * tilesize - ob.width;
  trace ("4cndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  }
  on the other
  {
  movedit = true;
  AXM = dirx;
  If {(ob.upright)
  
  OB.x += movespeed * dirx.
  OB.y = movespeed;
  }
  If {(ob.downright)
  
  OB.x += movespeed * dirx.
  OB.y += movespeed.
  }
  }
  }
  }
  
  //
  control of collision movem
  //
  actual rotation
  trace ("5ndtmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  OB.clip.rotation = NttR [npcFindTurn (axm, aym)];

  If (! axm == 0 & & aym == 0 & & ob.turn! = 0)
  {
  ob.xMove = axm;
  ob.yMove = aym;
  }
  trace ("beforeobx, oby:", ob.xtile, ob.ytile, ob.x, ob.y);
  OB.xtile = GgetXtile (ob.x);
  OB.ytile = GgetYtile (ob.y);
  trace ("afterobx, oby:", ob.xtile, ob.ytile, ob.x, ob.y);
  
  OB.clip.x = ob.x;
  OB.clip.y = ob.y;

  hit a tile takable

  var name = game.currentMap + "t_"+ ob.ytile + "_" + ob.xtile; ".
  trace ("tracing takable:", name);
  trace ("takable:", .takeable [name] of game);
  trace ("taken:", sloppy game [name]);
  trace ("lastndmovenpc, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, tilesize, movespeed, ob.width, ob.height, dirx, diry:", name, ob.clip.name,)

  OB.x, ob.y, ob.xtile, ob.ytile, TileSize, movespeed, ob.width, ob.height, dirx, diry);
  If (game .takeable [name] & &! neglected game [name] & &!) () ob.ammocount > ob.ammomax) & & ob.throwing)
  {
  OB.takeing = true;
  OB. CFRAME = ob.takeframec;
  ob.clip.gotoAndStop (ob.cframe);
  NPCtaketileitem (ob);
  }

  
  return (movedit);
  }

  function checkbounds (x, y, ob) {}
  trace("cbparsx,y:",x,y);
  trace ("checkbounds1, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry:", name, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width,)

  OB. Height);
  ob.downY GgetYtile ((y+ob.height-1) =);
  trace ("checkbounds2, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry:", name, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width,)

  OB. Height);
  ob.upY GgetYtile ((y-ob.height) =);
  trace ("checkbounds3, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry:", name, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width,)

  OB. Height);
  ob.leftX GgetXtile ((x-ob.width) =);
  trace ("checkbounds4, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry:", name, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width,)

  OB. Height);
  ob.rightX GgetXtile ((x+ob.width-1) =);
  trace ("checkbounds5, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry:", name, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width,)

  OB. Height);
  check if they are walls
  If (ob.upY >-1 & & ob.upY < ytilemax & & ob.leftX >-1 & & ob.leftX < xtilemax) {}
  OB. UpLeft = getttf (ob.upY, ob.leftX);
  }
  on the other
  OB. UpLeft = false;
  
  If (ob.downY < ytilemax & & ob.downY >-1 & & ob.leftX >-1 & & ob.leftX < xtilemax) {}
  OB. DownLeft = getttf (ob.downY, ob.leftX);
  }
  on the other
  OB. DownLeft = false;
  
  If (ob.upY >-1 & & ob.upY < ytilemax & & ob.rightX < xtilemax & & ob.rightX >-1) {}
  OB. Upright = getttf (ob.upY, ob.rightX);
  }
  on the other
  OB. Upright = false;
  If (ob.downY < ytilemax & & ob.downY >-1 & & ob.rightX < xtilemax & & ob.rightX >-1) {}
  OB. DownRight = getttf (ob.downY, ob.rightX);
  }
  on the other
  OB. DownRight = false;
  trace ("endcheckbounds, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile, ob.width, ob.height, dirx, diry:", name, ob.clip.name, ob.x, ob.y, ob.xtile, ob.ytile,)

  OB. Width, ob.height);
  }

  
  function GgetXtile(inx:int):int {/ / / calculate xtile coord}
  Return (Math.Floor (INX/TileSize));
  }

  function GgetYtile(iny:int):int {/ / / calculate coord ytile}
  Return (Math.Floor (iny/TileSize));
  }

  
  function getttf(y,x):Boolean / / get traverstable traverstable [] table flag is a dim table 1, containing Booloean true or false indicating the tile is traversable
  {
  Return(traverstable[y*mapWidth+x]);
  }

  
  

  I solved it...

  A little

  It seems that something is wrong in the calculation... sometimes.

  Calculation, I discovered that the real end result is exactly the same as the previous x & values y

  If the whole line can be deleted. Solve the problem and save time cpu.

  Question remains how this error is possible.

  I'll repost ultra format short.

  Kind regards

  Mac

• Automatic update of Firefox is to install additional software?

  I find research protect and Optimizer Pro on many systems that I fixed, and I've isolated it's to proceed with the installation as a free add-on to another program, and they all seem to have Mozilla Firefox...

  When the automatic update occurs, it is install anything beyond Firefox?

  If so, and if it's the research installation protect or Optimizer Pro, please stop it immediately. These programs lead to the "FBI Virus" that has been updated this year to contain the virus 'Homeland Security '... Research Protect finally installs Optimizer Pro, so if someone tries to uninstall it, through normal means, it installs or launches the rendered useless computer virus.

  These modules have become a headache for the customers as a whole and has been a concern for me, for fixing their computers...

  The case, please let me know if I can exclude him... I was surprised by her appearing on people's computers who navigate on the internet, that is why I came to the conclusion above possible...

  The software update in Firefox installs only the updates to Firefox whether partial or full depending on the circumstances, you have missed an update. The heel and complete installation for Windows of www.mozilla.org only is Firefox as nothing extra is installed either a toolbar or to a separate application.

  Firefox becomes one of the list less apps that comes with anything on Windows, Mac OSX or Linux.

• HP envy 15 t-j100: how to get windows 7 on my machine

  I installed Windows 10 on my machine and I am not happy with the performance. He regularly asks me to install .net 3.5 and when I try to install, it gets stuck in the middle.

  so I want to back to wimdows 7 (preinstalled by HP when I bought it)

  Please help me solve this problem. It has become a headache and I am unable to work properly on this machine.

  Thank you

  Watch the following video.

• Missing DLL files

  Hey I have a problem... I recently labview on my computer... New installation... The problem is that any drivers I install for any instrument keithley, I get the error "KE - _32.dll ' (-is synonym of 6485 or 622 x) missing file...

  I installed the software and the following drivers but still get this error:

  KIOL - 850 06

  KE6485

  622 x - 855 b 011

  For KE6485/6487, I got the DLL to the following post (https://forums.ni.com/t5/Version-Conversion/LabView-5-1-to-11-0/td-p/2236414) , but now it becomes a headache that occurs with all instruments... Anyone know how I can fix this problem?

  This is not the default for an IVI driver directory, as you can see. Place it in the bin folder it seeks. A lot of information in this ToolTip that you're ignorant.

• How to find all the Subvi value changes to a control inside a cluster?

  I have a question I've had brewing for many years now, and as of today, this issue has become less philosophical for me now that I have a VI project with hundreds of screws in there to work through... If I have a cluster which is passed between/through several subVIs, is there a way to find all reads/writes to a particular control within this cluster? For example, if I use a global variable, I can find all the instances where this variable has been changed. Several times, a cluster is used to pass data instead of lots of global variables, but I know not anyway quickly find where specific parts of the latter are read or written in subVIs. Global variables becomes a headache when they are too many of them fly around, but I can't keep track of reads/writes in bunches without manually looking through a few screws hundreds that take in the cluster. Is there a function for this that I'm not aware of? I hope that this question/problem of logic. This may prompt a discussion of architecture, which I would be happy, because I will need to build projects of this scale in the future, but I think also completely stuck when the clusters are used (by me or others) to pass data autour. Thank you! John

  If you ungroup by name and bundle by name, just do a search for text to the name of the control.

• Error 3, error 1068, missing files? HELP Please

  OK, where to start, bought a wireless adapter, tried to install it but told me to turn on ' ' windows wireless... attempt to start auto Setup WLan, but got error 1068: The Dependency service or group failed start... so I check the properties, check the dependencies and 2 are not some are "on the road" (CNG Key Isolation & Extensible Auth. (Protocol)... has tried to start but got the same error 1068 for the EAP protocol and had error 3: the system cannot find path specified, for CNG... AHHHH... so I run a hijackthis to see whats up, a lot of 'missing file' and 'No file'... so I access the System32 folder and search for each other... EVERYTHING is there...

  so the question is... Why can't I start the autoconfiguration WLAN service? Why can't start EAP? Why cant KeyIso 'judged '?

  It's become a headache just HUGE to make a pc "wireless".

  thanx

  Hi SoopaCee,

  You can try the steps with your anti-virus off temporarily to see if it might be in conflict:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Interruption material (Usbport Dxgkrnl, Heci) make high CPU

  Hi expert,

  Please help me in this matter:

  I have problem with my laptop on a few week it is still not solved:

  -When I start start up, the CPU usage is about 1 to 2%.

  -After a few hours, my CPU usage is about 30 to 40%, but no program is running. Just restart, becoming 1-2% CPU usage

  -Use the command xperf and I found 3 interruption make my laptop slow:Usbport (highest), dxgkrnl, heci

  Xperf-on latency

  Xperf d DPC_Interrupt.etl

  -J' I format and install windows again, but still not solved.

  My laptop is:

  -Windows Vista SP1

  -HP 6930P

  -CPU P8400

  -VGA: Family Chipset Mobile Intel (r) series Express (pilot Lastes: the HP website 7.15.0010.1652)

  -RAM: 2 GB

  Here's my tie etl:

  http://www.mediafire.com/?g7mhz4ag76f2ae5

  Thanks for the attention.

  Best account.

  Hello

  great that you have found my guide on phpcs.com :)

  The HECI.sys driver is part of the Intel(r) Management Engine Interface, so update, please.

  For the usbport question, remove the USB external hard drive and update the driver of the motherboard.

  Also install the Sp2, you always use the Sp1.

  Best regards
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Copy / paste stops working in Windows 7 Pro

  Hello

  We have a PC running Windows 7 Professional 64-bit, Quad i7, 8 GB of RAM. The machine is used for editing desk top - CS6 Adobe, Microsoft Office 2003, CAD. The machine will be left on for extended periods of time. Reboots occur if the system plays to the top (which is rare), or when Windows Update requires a restart.

  In rare cases, copy and paste in Windows work stoppages - which means that nothing can be copied and pasted between any application: Notepad, Word, Wordpad, etc. InDesign. CTRL + C and Ctrl + V do not. If we use the Edit menu to copy, and then in the same application or in another application click Edit, paste to the option is grayed out.

  A reboot will fix it.

  I ran SFC/scannow, but no problem not found:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.

  Windows resource protection did not find any breach of integrity.

  C:\Windows\System32 >

  Even if a reboot can solve this problem there are times where a large number of applications will be open and restart becomes a major obstacle. I don't want this issue to become a common problem, so I was wondering if you people had any suggestions that I could try to track down why it happened and how I can prevent it or even provide a fix that re - allows you to copy paste & without requiring a reboot.

  Thank you very much.

  There is a long thread here on this subject, with several proposed solutions.

• Netlogon 5719

  Hi all

  I got errors in the event viewer on the client PC.i.e: Netlogon 5719, kernel Event Tracing 2, lsasrv 40960, GroupPolicy 1055 & 1053, DNS Client events 1014 because of which I can not access any resource that is shared across the network, it gives an error while all permissions are given to the domain user and we are not able to change the password of the client area as he says with it not there has no server of connection available to facilitate your request and print it also take a lot of time when an impression is sent to the domain user account. I tried to join the domain, but still it is in error. We use windows server 2012 and windows 7, and we have different subnets or network this is joined with the same domain. All systems work well except ours one. All the other networks does not receive one of these errors except ours. We are able to access the resources shared on wifi but not on the local network. Our computers are connected to the router n switches and then forwarded to the field Controller.I am also able to access the shared resources of the local user. I think it's a kind of question of LAN. But I don't know where to start to fix this problem. Please help me it has become a headache for me. I'll be very grateful to you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• RV082 SB + switches with functionality of tag vlan

  Hi guys,.

  I have a small laboratory data center at home, with 1 Server iSCSI and VMware ESXi 5.1 3 guests. I run a few linux servers and windows servers.

  And a couple of years ago I bought a Cisco SB double RV082 VPN router and a Netgear smart switch in order to have more segmentantion and management on my network and the virtual machines. I was really happy with the Cisco router, because of stability and functionality.

  But after a while, I wanted to learn VLANS and vlan tagging and discovered that I wanted to create interfaces for the different VLANs. I installed the firewall open source pfSense, in order to create these VLANS with tagging of the firewall and on switches/esxi hosts. The pfSense has been installed in a virtual machine on one of the hosts vSphere, and which has become a headache if something happened to the host. So I decided to go back to the Cisco SB RV082.

  So here's my question:

  Is it possible to still have all these VLANS that I created on the switches and ESXi hosts when I swap to the Cisco router? Even if the Cisco support only port service VLAN, this shouldn't be a problem? Because of the Multiple subnet feature? These VLANs will have access to the Internet and does not have access to another. Only the primary network management network should have access to the VLAN.

  Let's say my primary network is 192.168.1.X and I have 5 VLAN with IP 192.168.2.X,... 3.X... 4.X etc. To be able to use these VLANs on all devices, do I need to assign each VLAN on the Cisco to a specific port? Which means I'll have 5 Cisco cables to the switch?

  I'll probably have a DC with DHCP and DNS on a few of VLANS I create. If DHCP for the different VLANs will be created like that and won't have the firewall (which RV082 can't stand?)

  In my head, this logical text/topic. But I'm not quite sure if you guys understand what I'm saying or want to accomplish here. So please don't not to ask :-)

  Thanks in advance.

  Hi Ruben, this router supports the only port VLAN basis. It does not support any tag VLAN (802. 1 (q). This is reflected by in, VLAN does not matter them, only the subnets.

  If you need the subnets to communicate through the router, you can activate the functionality of multiple subnet.

  If you want to limit disclosure of the host, you can try to establish access rules to limit communication subnet.

  -Tom
  Please mark replied messages useful

• I have problems to access the homegroup on one of my computers networked

  I can't access the homegroup on one of my computers networked: I can't view/print the password or leave the homegroup.

  The homegroup listener service is not running and does not start; It depends on the Server service which does not also.

  All the services depends on "Server" are running, while I find not all controls bound to the drivers SMB or srvnet.

  The error message when the Server service or the HomeGroup listener is tempted to start is:
  Error 1068: The dependency service or group could start.

  Thank you very much, Jack MVP.  I downloaded and installed ServiWin as directed by your recommendation.

  It showed me that the server SMB 1. XXX driver (srv.sys) was not working.  I then used the 'Google - executable name' search option from right-click menu.

  This showed me in turn to the web page of "http://support.microsoft.com/kb/2473205" entitled: "list of currently available patches for technologies in Windows Server 2008 and Windows Server 2008 R2 file Services.

  In this page, I found a section entitled SRV component with a link to the article 2625434 knowledge base: "http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2625434&kbln=en-us."

  This allowed me to download an a security update that contains the latest version of the srv.sys.  Installation of this repaired my faulty installation of the SMB 1. XXX driver.

  This then allowed me to do things like "View the HomeGroup Password" and "Leave the HomeGroup" that I couldn't do before.

  I was then able to join the homegroup, and after restarting, become visible to my laptop.

  I then told the phone leaving the homegroup and then join and now computers are visible to each other.

  All Windows 7 computers on my home network are now visible to the other in the homegroup.