restart the computer in a black screen

Similar Questions

• Start the computer with a black screen

  Original title: my computer problems

  When I turn on my computer, it turns black and does nothing so I stopped it and when I restart it it happens I do the windows startup repair. When I do that my computer becomes black and does nothing more.

  Hi Austin,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with the computer from a black screen.

  This problem can occur because of faulty video drivers.

  Perform the steps from the link below and see if it helps.

  Why my screen is black when I start Windows 7?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Answer to us if you are having problems with the black screen or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• I want to know why when I restart the computer and save it that I restart the computer came out black background

  I just want to know why every time I restarted the computer I save then come out of the background is black, I put the f1 not the way I had before why now I guess that something is missing can fix you it for me please

  Hi linsugr,

  Do you know when this started?  The simplest solution because I have no idea of what is happened to cause this is to restore the system to a point BEFORE this problem started (and give it a a few days to be sure).  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try to go back a little further and see if you are met with success.

  I hope this helps.

  Good luck!

• Start the computer to a black screen after you uninstall a game.

  Original title: cannot start the operating system.

  OK I installed this game, so he has not ran smoothly and I uninstalled it. When it was above him asked if I wanted to restart the pc. I did and when I restarted it loaded the 1st screen and it became all black. so I decided that I restart again but same thing happened on n, I indeed that this stay for awhile on a black screen, thinking it will take some time to load up, but no, I put the windows CD boot in and pressed F12on starts from the CD-ROM, the CD-ROM began checking for hadrware and other things , but in the moment, it says install from the screen went blue with white letters saying error. He says can be caused by the virus, malware or any newly installed software. I rebooted and now I'm under certain diagnoses by symptoms - came with my dell pc. so the symptom I am scanning is "can not boot the OS" no results to present but can someone help me? or tell me hor run in safe mode or anything like that? THX

  Hi VladKrem,

  You receive the rattling of the computer?

  I recommend you perform the upgrade on Windows XP site & check if it helps.

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  Hope the helps of information.
  Please post back and we do know.

• Start the computer to a black screen after the improperly installed display driver

  original title: display driver

  I installed the wrong display driver and now black screen when the computer starts

  Hello

  Start mode safe mode with networking.

  Go to the website and get the correct - driver download but don't install it yet.

  Control Panel - device - graphics cards - right click on the adapter Manager - UNINSTALL-
  Check the box - DRIVER to REMOVE when complete reboot safe mode.

  Now, install the appropriate driver.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• El Capitan: macbook pro encryption self started after the update to iTunes on 11/12/16.  After restarting the computer open to grey screen asking if I wanted to use ICloud password or logon password updated.  I don't want / need for encryption I do?

  After update iTunes on 11/12/16 my computer restarted "grey screen" and required a password for encryption.  He encrypted then my MacBook Pro (10.11.2) in addition, the iTunes update has 'lost' My Playlists, and 90% of my purchases.  Apple Care level 2 could not find them!  They appear in my account, but not in my iTunes.

  1 can I fully encrypted computer?  Otherwise how can I UN-encrypt?

  2. How can I get my old, entirely organized iTunes back?

  Thank you

  File Vault encryption is a security feature. Olny you know if you want or need it. I don't use it.

  To remove the see of

  Use FileVault to encrypt the boot on your Mac - Apple Support disk

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  It appears that there is a problem. This happens a few times. If you have a backup yo can restore from the backup

• At the end of the factory restore, but black screen after "Windows has set up the computer.

  The model in question is VC863AA #UUW

  I want to get back the computer to the factory condition, so I rebooted and you press F11. Everything went exactly like this: http://support.hp.com/us-en/document/c00814731#N72 (chapter "Start a restore from the hard drive and the computer is off")...

  .. until step 10, which States:

  "The computer restarts and continues in the installation of Windows. Complete the configuration screens and wait until the computer finishes the installation program. "Then turn off the computer, reconnect all devices and turn on the computer.

  Yes, the computer restarts. She continues in the Windows installation (it says "medan windows konfigurerar datorn Vanta", which means roughly "Please wait while Windows configures the computer"). After that which was for about 5-10 minutes, the text disappears and the computer restarts by itself.

  After that, he gives a normal load Windows Vista bar and after that black screen. It seems to be a little bit alive but jammed somehow. If I let it be for several hours, he goes to the standby mode. If I wake up, he still won't. I can plug a USB another keyboard and he will make some access to hard drive (load a driver probably). I can press the sleep button and it will go into sleep mode. But if I press the power button / stop briefly, it will NOT stop.

  So finally, after several hours I forced to shut down (by pressing the power button / stop longer). When I start it, it goes back to behave as explained in the previous paragraph.

  If I press F8 during startup and select Safe mode, it goes in safe mode and I get dialogue indicating in Finnish:

  «Asenna Windows: Windows ei voi suorittaa vikasietotilassa asennusta.» See devam fenetresdans asennusta uudelleen tietokoneen kaynnistamalla. »

  Rough translation:

  "Installation of Windows: Windows cannot complete installation in safe mode." "You can continue the installation by restarting the computer.

  If I restart the computer, it goes back to the black screen after the windows loading bar.

  This suggests that there is something in the installation of Windows who jams it.

  I can install Windows Vista from a Vista DVD, but then I can't use the software included with the computer. (App States installation cannot install on a machine that is unauthorized, then of course they are looking for some OEM HP things.)

  Any suggestions on how to fix jam that continues with installing Recovery Windows or how to install the software on a normal Vista would be very appreciated.

  I solved the problem. Good thing I didn't order the restore disks, because that would not have solved the problem.

  I decided to post it because I don't know there will be others who have HP Pavilion Elite m9754sc and will have to face this problem of a black screen after the restoration.

  The fact is that the restore worked perfectly, but in this display card driver is buggy and it causes the screen to go black.

  I thought that what I installed fresh Vista which worked until I installed the driver from the recovery partition display. I tried VGA, outputs HDMI and DVI on the factory installed GeForce GT220 and none worked.

  A defective display driver should normally be no problem we could go in safe mode and fix it to the it. But as with the recovery goes to pre install state (ask what language to use etc.), safe mode does not work.

  So the solution is to unlock the display of the motherboard connectors and remove the factory installed GeForce GT220. Once the recovery and installation of Windows is finished using the graphics card integrated motherboards, you can reconnect the GeForce GT220 and get a updated driver with safe mode.

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• computer only blinked a cursor in the corner of a black screen after that it shuts down. Was it an accident?

  Original title: was it an accident?

  My computer only blinked a cursor in the corner of a black screen after that it shuts down. then the fan stopped running current and the screen went blank, but I could still hear the hard drive running. Was it an accident?

  Yep, especially if she does not return.

• I downloaded a Vista Service pack update. Upon restart, the computer crashes upward on the screen:! 0xc0190036! 2348/48738 (fusion.d11)

  I was invited by what looked like a legitimate update notification.  After update, it asked me to restart the computer.  The computer hangs above the screen.  I tried Start Up repair without result.

  Alton

  Hi AltonChewning,

  Please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Vista-SP2-installation-error-loop-x64/a1234293-0fc5-4688-8e2a-9229b3ebe365?page=1

  I hope this helps!

• Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer

  Original title: freezes

  Internet Explore screen becomes milky and occasionally freezes forcing me to restart the computer.  now the Bureau is milky and freezes from time to time.  whenever the circle of 'thought' continues to 'think' without success.  Sometimes it fades, but most of the time I have to stop and restart.

  Hello

  Check if there is information in Event Viewer which may help us to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Method 1:

  Step 1:

  Try to start in safe mode and check if you are able to stop normally. To start in safe mode follow the link given below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Method 2:

  Also, try to optimize the performance of Windows 7. Follow the link below which evokes the different ways to optimize the operating system.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

  Original title: black screen?

  My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

  Hi Miguel C.
   
  a. What is the brand of your computer?
   
  b. do you remember of any changes to your machine before the question?
   
  I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
   
  J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
   
  Note: Do not move this jumper with the computer turned on.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• ADE 3.0 crashes on Windows 7.  Transfer screen continues to operate. Cannot close ADE without restarting the computer.

  ADE 3.0 under Windows 7.  If I transfer a book at my e-reader, the screen freezes in the 'transfer' and seems to keep loading even if the book is already present in the drive.  Cannot close ADE without restarting the computer.

  Right click to the digital edition and run as admin.

• Computer stuck on black screen

  Hello

  Last week after hibernating my computer (Windows Vista), reported an error during startup, saying that a file has been corrupted (sorry, I don't know what particular file - something to do with the information of hibernation) and there was a mistake in the restoration of hibernation. At this point my keyboard does not respond at all, not being able to press return to select options on the black screen (or respond at all to the caps lock or any other key), so I restarted the computer in an attempt to circumvent this.

  But now now I just get another similar error on the last attempt to resume the failure of the system. It gives two options - "Continue with system summary" or "Delete restoration data and proceed to system boot menu" - but always my keyboard does not respond. It seems not to respond on this menu; While the computer worked the keyboard was very good, and it also works on the BIOS and the menus of configuration before it gives this error (although I have not played around with these menus, just in case). I also tried to connect 2 other keyboards is not this keyboard in particular.

  PS I remember correctly, I do not think that the keyboard has never worked in any other similar black screen of menus (such as the ability to start in Safe Mode, although this menu contains a selection automatically after 30 seconds)

  Any help would be appreciated.

  Jack Ro

  Hi Jack Ro,.

  Follow the steps below for a possible solution:

  Method 1: I suggest that you select the second option "Delete restoration data and proceed to system boot menu" and let the system startup.

  Note: All by the system on the computer start menu if bad sectors are found on the disk hard when the system start menu try to repair this area if all available on which data may be lost.

  Method 2:  Follow the steps mentioned in the link below to access the system recovery tools.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Run the tool to restart system as shown in the link below:

  How to use Startup Repair?

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I would recommend also refer the link that has the solution for the problem likebelow:

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/29be7cad-a7ad-4d38-A1F5-fca7561eb0f8

  Hope this information helps.

• restarting the computer

  When I start my computer, the message appears "Installation dates, do not turn the computer off" then the process starts and restarts the computer, the cycle continues. I don't even get to the main window, it keeps restart attempts to install updates

  I was able to solve the problem with a chat with HP technician. He proposed to restart the computer. When the first screen appears, press F8. then go on winodows repair. then you climb across the name, country etc. After that, you get the options to reinstall, repair, or restore to the last update. Restore the computer to the last point where he worked well. My problem has been resolved in this way.