restarting the computer
When I start my computer, the message appears "Installation dates, do not turn the computer off" then the process starts and restarts the computer, the cycle continues. I don't even get to the main window, it keeps restart attempts to install updates
I was able to solve the problem with a chat with HP technician. He proposed to restart the computer. When the first screen appears, press F8. then go on winodows repair. then you climb across the name, country etc. After that, you get the options to reinstall, repair, or restore to the last update. Restore the computer to the last point where he worked well. My problem has been resolved in this way.
Tags: Windows
Similar Questions
-
After the 10.11.5 update, that I could never restart or shut down my iMac (late 2013, 3.2 GHz Intel Core i5, 8 GB 1600 MHz DDR3) using the new menu. I can only stop it by pressing the button for a few seconds. I saw a few discussions addressing the question here and have tried to implement some of the solutions proposed, such as restarting in safe mode, deleting the application from Wacom-, but nothing has worked. Now I can't get the 10.11.6 updating or update my Adobe Creative cloud, incidentally, which became available to me, because I can't restart the computer. Do you know if this update would be better and solve the problem? Is there a way I can get this update even if I cannot restart the computer, or even to restore the system to an earlier version?
Perhaps run EtreCheck and post the results here.
-
The parameters of the dock in the system prefs not saved. When I restart the computer, the dock is always located at the same place (bottom) even if I changed before. I have mac os X 11 5 on a mac pro (mid-2010).
In the case where all third party apps, anti virus are installed, remove them. Click go > hold down the option key and don't release > click library > Preferences find com.apple.dock.plist, com.apple.systempreferences.plist and right click on them and move to the trash.
The apple logo reboot and empty the trash.
-
I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).
Try to remove FF from your pc and then it re-download the new version.
-
D3D9window crashes firefox. Need to restart the computer. Often!
D3D9window stops fire fox download. Must close and restart the computer.
Thanks much philipp. Problem and updated driver seems to have been fixed.
-
Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q
You should be able to move your cursor to the top of the screen and the menu bar will fall. So, you start with
Drag the slider to the top of the screen against the edge and hold that and you should see
Click the button of "green". This should take you out of mode full-screen Mail.
Command + control + F should do it too.
Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output
You should also be able to use the command + Tab to switch to another application
-
Last night, my system was still using Firefox 3.5.8. I played Farmville on Facebook and everything worked well. This morning, I connect to my computer and find that I upgraded to Firefox 3.6. I tried to play Farmville all morning and Adobe Flash Player continues to break. I tried to update Flash Player. I tried to restart the computer. Nothing works.
URL of affected sites
Another potential cause of this problem is that the lock timeout is set too low:
- Select the address bar of Firefox (click or press CTRL + L)
- Type of topic: config and press enter
- Click on I'll be careful, I promise!
- in the filter box, type dom.ipc.plugins.timeoutSecs
- Double-click the setting and change the number.
The default number is 10, for a default timeout of 10 seconds. Some games Flash can be slow and requires a higher setting. I would recommend to change that to 20 if you have problems with this.
In addition, it would really help if people who encounter this problem let us know what games Flash is slow - and as soon as they are slow. Thank you!
-
Click on an application and sometimes restarting the computer
I just bought a mac 2nd hand and by the title of this post it sometimes restarts the computer, however this is most frequent during the first 20 minutes of switching on the mac, after that it seems pretty stable.
I'm on a processor I7, Macbook pro running 10.11.3 El Captain with 4 GB of ram
I don't know if it's a hardware or software problem clues?
Thank you
Open the Console app.
If journal list does not appear on the left, click view a list of journal.
Click the triangle next to Diagnostic system reports. It should display the content of this category.
Select the most recent kernel panic log. The name starts with core and ends with .panic.
Select and copy the entire text of the panic begins after the line reading anonymous UUID.
The copied log beyond panic at an answer here.
-
Restart the computer cause printer 'disappear '.
Hello
I'm having this problem for a while. I have HP 1020 printer and Windows 7 x 64, installed the latest printer drivers from the official site... but when I restart the computer there are no printers in the section "devices and printers" in the Panel. When I clik print format in Word for example, nothing happens, no print dialog box. When I click on add a printer in "devices and printers" it says "Windows can't open add printer." The local print spooler service is not running. Please restart the spooler or restart the machine. Printer driver not yet "solves" the problem but only until the next reboot and so much more... And there is no driver or something else with HP in the "Add Remove" section of the Control Panel, in order to clean uninstal and drivers.
Someone, help, its very annoying...
Thank you!
It seems that something prevents kill your print spooler. Have you ever had a Lexmark printer installed on this computer? I ask because sometimes they can cause a dependency in the print spooler that needs to be addressed. To try to solve the problem when he gets up, run the print HP and Scan Dr. it should restart the print spooler and disappear temporarily problems with it.
-
AirPlay does not connect without restarting the computer
Hey guys,.
I work in a school and all teachers have a MacBook Air 2011 or newer running 10.10.5 or newer. Many also have Apple TV connected to projectors so that they can use AirPlay to reflect their computers to projectors. So here's the problem:
A couple of my professors can connect to their Apple TV and use without problems, but when they log off of Apple TV, the image of airtime in the bar of menus remains blue (which is normal when AirPlay is enabled). The problem is teachers are unable to reconnect to the Apple TV because the computer thinks it is still connected. Restart the computer to log in again!
The computer will display the Apple TV as a device which we can connect to, but it never connects once it has been disconnected. It is a problem because teachers often connect to view a video and then disconnect so that they can work on their computers. If they try to reconnect, they need to restart their MacBook Air.
ATV is up-to-date. Has been restarted and connected to another network and always has the same question. Not sure if this is ATV related or associated with MacBook Air. The two devices are connected to the same network that has no restrictions.
I think I've cracked it because I had the same problem and since there are 2 minutes I solved it.
Open activity monitor
Click on the tab network and research AirPlayXPCHelper.
This quick process and fact.
Not sure if you have to do each time it stops working, but it is much faster that restarting your computer.
-
Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)
What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?
The drive is formatted for Mac? Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended. Otherwise, to save the files on the disk and ease than Mac OS
-
Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron
Moved from feedback
Original title: WiFi
Hello
1. what version of Windows is installed on the computer?
2. is it works much earlier?
3 have there been recent changes made on the computer before the show?
To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.
If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.
If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.
This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.
The automatic Wireless Configuration can also be started and stopped from a command prompt.
To start the automatic Wireless Configuration, run the following command:
net start wzcsvc
To stop the automatic Wireless Configuration, run the following command:
net stop wzcsvc
For more information, see the link.
Wireless Zero Configuration Reference
Please post back with the results and we will be happy to help you further.
-
Original title: sql
I install sql 2000 Server 2008 always message like this it takes a previous installation to restart the computer. I reboot several times the same problem or a message when I try to run the installer.
Hello Roberto,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en/category/WindowsServer
Hope this information helps.
-
I just want to know why every time I restarted the computer I save then come out of the background is black, I put the f1 not the way I had before why now I guess that something is missing can fix you it for me please
Hi linsugr,
Do you know when this started? The simplest solution because I have no idea of what is happened to cause this is to restore the system to a point BEFORE this problem started (and give it a a few days to be sure). If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html. If the first attempt fails, try to go back a little further and see if you are met with success.
I hope this helps.
Good luck!
-
Installation of the automatic update continuously restarts the computer
Has been notified of an automatic update, so I clicked on install. An update was IE8. Don't know what the other was.
At one point, the update indicated that it needed to restart the computer to complete the update.
Computer turns off and when he started upward, the following text appeared:Configuring updates stage 3 of 3 0% complete
Do not turn off your computerIt remained for about 5-10 seconds while the computer off.
It's now an infinite loop which he can't seem to escape.I tried to reboot in safe mode and command mode prompt secure, but it keeps on rebooting over and over again. Update supposedly created a restore point, but I can't restore.
http://support.Microsoft.com/kb/949358 does not work because the computer still restarts when starting in safe mode.
Now that?
Was able to borrow a Vista CD and get to a restore point. It seems that perhaps the only way to recover because no security Modes allowed Windows to come. Next computer will be Linux!
-
Update Windows automatically restarts the computer. I would like to disable this feature. I'm running a machine business with complex projects requiring a configuration long and delicate. The details below:
Type of operating system: Windows 7 Ultimate
Problem: Status of the project lost after auto restart during the night
Require: A method of disabling automatic restart after an automatic update is happening.
Tried: I already tried looking in the registry for an appropriate key change, but no have been found appropriate.Aelryn,
You can configure Windows update to meet your needs, for example, download the update and then let me choose when to install the same. This way you always get the automatic updates but you chose when and where and how to install updates at a time that is convenient.Then I suggest to change the Automatic Updates settings to meet the needs of PAHO.
Choice, you can turn off to THE (not recommended), you can adjust to download updates only and allow you to install them at a convenient time, you can adjust information only, or you can leave to do what he likes.
If you update, you must restart sometime in the case otherwise you are not protected and you might as well do not update at all. Everything is a matter of choice. One size does not fit all, so a choice can be made. I have updates informed me only, then I decide what, when and how to do to install the updates. It's my choice.
FYI -.
http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx
TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
Everytime I open Foxfire, I get the message at the bottom «Firefox automatically sends some data...» Choose what I share. And whenever I choose. Why it not only save it forever? And even with the options - whenever I have to reset my preferences? INC
-
I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard. They have loops at the end of the wires that look like they might slip on the pins. The wires connect to the upper part of the box of the
-
Printing images inserted on Windows 2003 with some of the top printed at the bottom
The printer is a Photosmart D7560. Images inserted into a Word 2003 document were still part of the top (which seems to vary) printed at the bottom of the image, despite the Preview Print shows images correctly. The text above and below the pictures
-
display a special character of JSON result
Hi all first of all, thanks to you all for your time and response to all the different thread, it was very useful for me to start my development. This is my first post, I will try to be clear: in my method of retrieving Http to json String using this