Restart the contacts

Similar Questions

• iCloud account appears two times in the contacts

  On my MacBook running El Capitan in the Contacts app or any other application using contacts (such as Message, FaceTime, Mail) on the left side where the accounts are listed the "iCloud" account appears twice. I tried every "solution" provided in another thread (such as discussed here: iCloud appears two times in the contacts ) but nothing seems to work. I even "clean installed' El Capitan and restored my system to my Time Machine backup (I can't start fees I need my Mac as it is).

  Anyone have an idea where you look maybe edit some system files or anything that will get rid of this double iCloud account? All the other thread solutions seem to work only until I have restart the Contacts app or do any work.

  Thank you very much!

  

  Updated - I contacted just the Apple Support and they helped me solve the problem.

  In system-> iCloud App preferences I disconnected my iCloud account and when asked to keep or to delete the files on my Mac, I would always remove Mac... After doing this, restart your Mac and you log into your account to iCloud again. This solves the problem of the iCloud duplicate accounts.

  Thank you Apple support :-)

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Cannot open the contacts on MacBook air

  I can't open the contacts on MacBook air (OS X Yosemite 10.10.5)

  Any solution?

  Good afternoon maorts,.

  I understand that you are not able to open the Contacts application on your MacBook Air running OS X Yosemite.   When this issue is produced?  Will there be any changes made to your computer?

  The first thing I would say is to restart your computer.  This system reset is often all that is needed.   If the initial restart does not resolve the problem, try to start your computer in safe mode.

  OS X Yosemite: start in safe mode

  If the problem still persists, if you use iCloud, check that your contacts are at www.icloud.com.

  Try to create a new user account.  Getting the Contacts app?  You can add a contact to it?  This will isolate the question to your user account or to a question of scale.

  OS X Yosemite: set up users on your Mac.

  If the problem turns out to be systemwide, then you should make a backup of your computer using Time Machine.

  Use Time Machine to back up or restore your Mac

  Then you can reinstall OS X Yosemite or update your software if your MacBook Air is compatible.

  How to reinstall OS X
  
  

  OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

  1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
  2. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
  3. This installs the latest version of Mac OS X, which has already been installed on your Mac.

  maorts, please take a look at the resources offered here, try these initial troubleshooting steps and responds with the results in this regard.

  Take care.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• On the opening of the contacts beach balls

  Contacts was beachballing constantly after a few manipulations (e.g., opening a contact, scroll the contacts), requiring a force quit.

  I removed the plist file, but the problem continues; and now it is beachballing on before opening the window display.

  EDIT: Now, 10 minutes later... the contacts window appeared. But by clicking anywhere on it he sends beachballing.

  Suggestions?

  You synchronize your contacts with iCloud or another synchronization service? If Yes, in system preferences > iCloud uncheck synchronize contacts. You can open Contact.app now?

  If not, your locally stored contacts?

  Exit Contacts.app

  Go to the library to the user. (see below)

  Go to ~/Library/Application Support/AddressBook

  Make a backup of the folder "AddressBook all." (in the case of things not going.

  Delete the address book file - v22.abcddb

  Contacts.app restart and this file will be repopulated.

  Still having problems...

  Do you have a Time Machine backup?

  Library of the user to see the

  The user library folder is hidden by default. In the unhide: select the Finder in the Dock. Less go in the Menu bar > hold down the Option key and you will see the library.

  Find the library user folder

  http://www.takecontrolbooks.com/resources/0167/site/chap11.html#FindingtheUserLi braryFolder

• There is no volume after restarting the device. Need urgent help

  Hello.

  Our ReadyNAS RN31600 iSCSI target device. We have (had) two LUNS of 8 terabytes each built on X - RAID 5, which are presented on a Windows Server.

  This device is less than a year, and he began to have problems today. First two LUNS disappeared from the iSCSI (WS 2008 R2) client. When we tried to restart the NAS server, he's hanging on "restart now, see you soon."

  We power off of the switch and after restarting, two LUNS seem to have disappeared, and the unit is empty somehow? How to solve this problem? Or is it quite normal on the Netgear devices to suddenly lose 16 terabytes of data?

  The GUI shows "there is no volume" and also "delete inactive volumes using disk. Disc # 1,2,3,4,5,6 ". This means that all the disks.

  Firmware is 6.4.0.

  And no, we don't have backups, because this device is used to a backup unit.

  I suggest you to contact support (support.netgear.com), because I think it will be faster than from here.

• The contacts app keeps crashing.

  I need help because when I type all contacts, he keeps brining back me to the home screen. This error is annoying because now I can CLEARLY and OBVIOUSLY not to open the contacts application. It's not a third party application, it is the generalization of Contacts Apple out of the box from Apple. IM using the iPad 2 Air btw.

  Hi there daavvanderveen,

  Looks like your Contacts application launches only for a split second, then closes. I'd leave the Contacts app specifically with the following steps:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset

  When you restart that should restore the application and leave open correctly. Thank you for using communities of Apple Support, let us know how it goes.

• M9452p Pavilion lock, restart the HP splash screen and freezes

  My HP Pavillion M9452p primer, I can connect and I ran a program to copy a disc.  the system froze, then went through the process of restarting and froze on the splash screen for HP.  Rebooted the system by closing doen ran diagnotics and received a message "BIOS4 Boot error, contact the HP support" what dio I need to do to fix this?

  Tried system restore and system recovery using the F8 key start, but he did not, it ran very slow and then rebooted to start HP with the F10, Esc, F9 and F11 options and froze both times.

  I just replace the HD two months ago, and it works very well. I just removed all the component and repluged everythignback to gether, ran diagnotics and everything that happened, but still have the same problem with freezing and restarting the HP splash screen.

  Motherboard?

  Mounted with different lock forum, freezing, etc.

• computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem

  Hello

  I have problem with my computer, when I start the computer it shows "computer will display a popup whenver restarting the computer, it says that mchd.exe is a problem" this error message and if I insert the USB the computer does not recognize the USB.

  Please let me know ASAP troubleshooting steps.

  Thank you & best regards

  Sashidara

  Hello

  I suggest that you start your computer in a clean boot state and check if the problem persists.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the link below for more information on the clean boot troubleshooting.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• "windows didn't load the installer for the contact display program provider" is a message I get when trying to install the nivida geforce4 mx420 pilot. How can I solve this problem?

  The driver file was accidentally deleted and everytime I try to reinstall I get an error message indicating that windows didn't load setup for display. Contact the vendor of the program

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  a. download the drivers from the Nvidia site. Click on the link below.

  http://www.nvidia.com/object/winxp_2k_93.71_2.html

  b. uninstall the Nvidia drivers that are installed on the system, then Device Manager software, then restart the system. The detection of material line is displayed.

  c. now manually choose the drivers you downloaded on the system and then install it on the system and check if the problem is resolved.

  Method 2:

  I also suggest you follow the steps mentioned below.

  a. locate desk.cpl in c:\windows\system32\dll cache.

  b. copy in c:\windows\system32 and check if the problem is resolved.

  I suggest you follow the steps mentioned in the article below.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960/en-us

  See also the article mentioned below.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658/en-us

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Restart the error for Windows Vista with the recovery disk

  I bought a Toshiba Satellite A355D-S6889 about two years ago. It came with Windows Vista. I subscribed to Norton AntiVirus and it totally messed up the computer. We lived with a duration of 5 to 10 minutes from start-up. In addition, many programs crash and it takes a lot of time for anything to work. I decided to for a recovery and a restore using the disks provided with the laptop. I followed the instructions, but it keeps hanging up on the second disc.

  I tried to use a method that I found searching for forums (restart the computer by pressing '0', but I got lost on the loading cycle.) I'm not very strong programming and I guess when a CD provided by the company must be used for recovery, it should work.  All my programs were legitimate, I want just my OS back so that I can use my computer.

  Help, please. Thank you.

  I bought a Toshiba Satellite A355D-S6889 about two years ago. It came with Windows Vista. I subscribed to Norton AntiVirus and it totally messed up the computer. We lived with a duration of 5 to 10 minutes from start-up. In addition, many programs crash and it takes a lot of time for anything to work. I decided to for a recovery and a restore using the disks provided with the laptop. I followed the instructions, but it keeps hanging up on the second disc.

  I tried to use a method that I found searching for forums (restart the computer by pressing '0', but I got lost on the loading cycle.) I'm not very strong programming and I guess when a CD provided by the company must be used for recovery, it should work.  All my programs were legitimate, I want just my OS back so that I can use my computer.

  Help, please. Thank you.

  Hey stileaux

  each manufacturer has its way of using their own recovery process

  for the best support, please contact toshiba to the below link and ask them how to use their recovery process

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Walter, the time zone traveller