Restart the system when stopping down

Similar Questions

• Restart the system when the export in h.264 format

  I use:

  Premiere Pro CS4 4.10

  Media Encoder CS4 4.10

  Windows Vista SP1 x 64

  When you export in h.264 format and in some cases of mpeg2, rendering gets about halfway done, then the system suddenly reboots.  I scanned the hard drives and checked the RAM for errors, both were clean.  I have disabled the automatic restart in case of system error, but the system still restarts.

  I have not tested all formats, but the export to Microsoft DV seems to work very well.  The problem started last Thursday, when I installed a second hard drive.  I was able to export h.264 and mpeg2 with no problems before this.  However, I removed the new drive, and the problem remains.

  This CAN be a power supply going bad, or even a CPU cooler fan problem

  Find your hardware monitor in the control panel and check the temperature of the cpu, at rest and during labor

• I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  Too generic a question, can you clarify considerably more for us? Your question could be reformulated in the following way and always be true?

  "I can't start my computer once he has had a BSOD. Something overheated, but I don't know. I removed the CMOS battery and replaced in order to asure me that a bad overclock on a core component has not caused the problem. Now, it restarts correctly, what is / was the problem? »
  The foregoing, what I thought you meant. The above statement is correct?

• When stopping down, planner of @backup trying to stop, but then "not responding".

  When stopping down, planner of @backup trying to stop, but then "not responding". What is it? Do I need? If so, how to fix? Otherwise, how to disable?

  Hi Paul Gray TX,.

  1. did you of recent changes on the computer?

  2. What is the finished message, you receive so that closing the computer?

  3 do you have any schedule tasks on the computer?

  Method 1

  Check and make sure that you don't have to schedule tasks defined on the computer during the process of closing.

  How to modify the scheduled tasks in Windows XP

  http://support.Microsoft.com/kb/308671

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Restart the system on behalf of closure after the security update.

  I am getting error below, so that the closing of the system. To restart the system if am selected stop. What happens after windows updates. Windows automatic updating is turned on. I use windows xp media Center 2005.

  After I am disabled: restart automatically at startup and recovery - system failure option.

  Stop: c000021a {fatal system error}.

  The windows logon system process terminated unexpectedly with the State 0x000000 (0x00000000 0x00000000) the system has been shut down.

  Can someone help me?

  Hi Christophe,

  · What is the service pack installed?

  Follow the steps in the links that contains information about the cause of the error and the resolution for the same below:

  Windows XP Shut Down and auto-restart issues:http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP:http://support.microsoft.com/kb/308029

  How to solve an error "STOP 0xC000021A":http://support.microsoft.com/kb/156669

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart Plus B209a-m wireless disconnects once the system is shut down

  I use the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64 bit. I have set the printer to connect to the wireless router Belkin isn't on the network. I have setup the printer several times and had it work wireless several times. Once the PC is shut down, the printer goes offline. I have to restart the installation time and time again to bring wireless online. I added the MAC address of the Belkin router and I have the camera had confidence in my Norton Firewall. I keep seeing "HP Network Support Automatic (delayed start)" in services, but by changing it seems to make a difference, I still need to run the installation once after the system is shut down. I see also two printer icons in devices and printers. We're just the Photosmart printer with a generic printer icon; and the second is Photosmart printer, Scanner, copier with a picture of the Photosmart which I believe it should be. I ran the installation at least 10 times and I get a good wireless system work then after that the machine is stopped for the day the printer is offline and do not print. How can I stop the printer goes offline in wireless mode?

  I solved the problem.

  I put the IP address to the MAC address of printers in the router.

  I put the printer to TRUST in the network settings on Norton Security Suite.

  The printer works wirelessly all the time now.

• Can auto start an application after restarting the system?

  Hello world

  I can't find a way to the automatic launching application after restarting the system about BB10. But he supports on OS5, 6 and 7.

  Anyone has any ideas on this subject on BB10?

  Noah

  To come support "app without a head" (https://developer.blackberry.com/native/download/roadmap/) , at some point, will provide a feature like that apparently.

  When we see, and if it will be in the first version of this capacity, must be announced by BlackBerry.

• Failed to create task scheduler to restart the system automatically within the given interval

  Dear experts,

  I have two accounts on my computer. One was a Director and another was normal user. but the two users are protected by Word.

  When I log in as normal user, how can I set a task in the Scheduler to restart the computer once every 6 hours.

  Thank you

  KP Swamy

  Hello PK Swamy.

  Welcome to the Microsoft Community Forum.

  The Task Scheduler service lets you perform tasks on a chosen computer automated. With this service, you can program any program to run at a convenient time for you, or when a specific event occurs. Task Scheduler monitors the time criteria or the event that you choose and execute the task when these criteria are met.

  I understand that you are not able to create the Task Scheduler to restart the system. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the following steps to create the Task Scheduler:

  1. click on start, type taskschd.msc in the start search box and press enter (it will launch the Task Scheduler).

  Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation and click Ok.

  2 left click in the right pane on the Task Scheduler Library > open Action in main menu > new folder > name MyTasks > click Ok.

  3. left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks).

  4. you can enter the name , for example "restart" and click on Next.

  5. in the trigger section, you can specify when you want to run your task, for example:

  a. Select daily and the press Next.

  b. now you can specify the day, time and all reproduce on a daily basis, after the press Next.

  6. in the Action section, you can choose what you want to run, for example, restart your system to do this:

  a. choose start a program and press on Next.

  b. in the field program/script , type shutdown /r and click on Next.

  7. click on end.

  Check out the link:

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Error: 0 x 80070005 access denied.

  I'm working on a given HP computer where the administrator was already settled by those who have set up the system when it was given. Now, I am trying to perform an action that requires me to use the program of scheduled tasks. I have problems with passwords and user ID. It defaults to the Userid of the machine number/administrator. I put the password when asked, but I was rejected when I finished to complete the scheduled task that I perfom. The scheduled task, I wanted to do was simply to have iTunes launch and play a song both partiucular. After completing all the details, I must click on 'Apply' or 'OK' and then I get an another dialog box asking that I get the password once more. I enter the password I put at the beginning when the application Assistant came on - but I get access denied - and the error number 0 x 80070005. Help, please. Thank you. * E-mail address is removed from the privacy *.

  original title: "error: 0 x 80070005 access denied."

  Hi HaikMuradian,

  For this particular issue, there is a fix available, you can contact Microsoft Customer Service & provide article 904423 which contains the fix.

  Reference: Error message: "0 x 80070005 access denied. You are not authorized to perform the requested operation"

  Hope the helps of information.

• To get on the internet I have to re - configure the NIC or restart the system

  To get on the internet I have to re - configure the network card or restart the system. My os is Vista 32 bit. How can I fix this so I can do things on the internet.

  I use Internet Explorer 9

  Hello

  You may need to update the network card with the latest drivers from the manufacturer's website.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-adapter-problems

• I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is it prevents to close?

  Original title: acro32.exe

  I did the update of windows, and there was a lot of mistakes. I then tried to restart the system, and it is said that acro32.exe is he keep awake. What is and how to fix it?

  If you really see a message about "acro32.exe" is probably malware you should scan your computer with the virus eset online scanner and then download, update and run the free version of MalwareBytes AntiMalware.

  If, as is most likely, the message concerns AcroRd32.exe, the main executable file of Adobe Reader.  Go to control panel > programs and features and uninstall Adobe Reader.  If you have problems uninstalling Adobe Reader, see--> http://labs.adobe.com/downloads/acrobatcleaner.html

  Assuming that things patches, install Foxit Reader (free) instead--> http://www.foxitsoftware.com/Secure_PDF_Reader/

  Or, if you really want Adobe Reader back, go here--> https://get.adobe.com/reader/ (remember to uncheck the box to install McAfee Security Scan or any other 'add-on free")

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• Problems with the passage of the anchor when scrolling down

  Hello! I got problems with my lag anchors to the left when scrolling down. I tried all the solutions found in some other Adobe Forums, but none seems not to work with mine

  Here is my website

  Home

  I hope someone can help!

  That was the problem with me. Using the 100% width option, he showed me my background and text blocks are indeed too wide. Thank you!

• Satellite Z830-10J battery discharge when the system is shut down

  My new Toshiba Satellite Z830 10J ultrabook with Win7 64 bit. all updates, works fine and shows no anomaly, there is however a strange exception.

  When the battery is completely charded and I 'pull the plug', the system runs on the battery for sometimes more than 5 hours, so I guess that the cycle of the battery is ok.

  When the battery is now fully charged again and I SHUT down the system and not using it for a few days.
  Then the battery is completely DISCHARGED to 0%, and the system does not start, until I plug.

  This phenomenon occurs in less than a week. So: loading of the batrery 100%, turn the system off, pull the plug, want to re - use the system after 7 days, yields 0% battery charge.

  Is there a specific reason for this?

  Greetings

  Roland Schweiger

  > It appears that one of the BIOS settings (disabling the sleep_and_charge or disable WOL) solved the problem

  Great! Thanks for the comments!

• Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. When I restart the system, this message reappears when I open firefox every time.

  I disconnected and then reconnected in. I clicked on turn off computer on the start menu and restarted the computer. I click on the computer of the off-ramp in the start menu and turns off the computer. I went to a computer point of restoration, and there have been no changes to the computer. I turned off my modem and rebooted. After all that I turned off the power strip and the power to all components. I restarted their in the sequence of the Internet by modem, monitor, CPU. Since that time I have not turned on my speakers to my printer

  Create a new profile as a test to see if your profile is at the origin of the problems

  See basic troubleshooting: a new profile

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox