restoration of systems

Similar Questions

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.

• Restore the system (win7) after upgrade to Windows 10

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  Posted by niikos
  

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  There is no solution?

• I have recently had a hard drive crash, fortunately everything was backed up, but I can't find my Firefox bookmarks in the back upward to restore my system, can anyone help?

  I have a fill Windows backup of my hard drive took about 12 hours before the drive failure. I restored my system, but have failed to find my previous favorites of my previous version of Firefox. I guess I asked which folder they are in the backup system?

  All your data such as bookmarks, passwords etc., is contained in a folder called 'profile '. See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data

  You can recover your data from the old, if it is still intact and move it to the new profile. This article explains how to on this issue: use of the Profile Manager to create and delete profiles Firefox

• Satellite P300D-136 - how to restore the system?

  Hello

  I own a Toshiba Satellite P300D-136 with Windows 7 (64-bit) and I want to restore the system. I've tried the way by clicking on the value 0 or F8 at startup, but it does not :-(

  The HDDRestore Partition is available...

  Best regards

  Andi

  As far as I know Satellite P300/P300D comes with Vista and not with Win7 for Win7 installation drive recovery HARD work not at all. You can install Vista, maybe, but certainly not Win7.

  Because of this, I assume that you have installed your own version of Win7. Can you confirm this?

  Is that HARD drive recovery facility (F8 > fix my computer) works with the installation of recovery only (out of the box).

• Restore the system to the original settings

  I'm trying to restore my computer to original settings to overcome a Trojan horse that has hijacked my Internet browser. When I use the restore option, it only allows me to come back in 3 months and then tells me that the parameters are then the same as today. How to restore original system checkpoint system - for when I bought the computer in March 2003? Thank you much for the help.

  Hello

  If your dining options offers more restore points, then there is no chance of working with this function.

  So if you want to retrieve the original settings, you must recover your system with the supplied restore CD.

  Good bye

• Z220 CMT Workstation: restore the system to factory settings.

  Model: Hp Z220 CMT Workstation
  OS: Windows 7 Professional
  
  I'm trying to restore my computer to factory settings. I pressed ESC several times at the start to the top of the computer. Select the system restore, but the computer just hoot to Windows form. I can not connect to windows, because as some error loading windows.
  
  Is there another way for me to restore the system to factory with a clean Windows 7?

  > is there a way for me to get the recovery disk?

  Two ways:

  1. in Windows system work, running the same version (32-bit? 64-bit?), you can burn a disc of "recovery."

  2. find a friend with a 'detail' in the Windows 7 operating system DVD (remember this is the same 32-bit or 64-bit, your system) and borrow the DVD of him/her, or get him or her to burn a copy of it.

• How to restore the system to Satellite L750-A010?

  What is the possibility of recovery system for extracting device L750-a010?

  You can choose a HARD recovery disk or you can create a recovery disk and could use the floppy disk to restore the system.

  The recovery disk must be created using pre-installed tool called Toshiba Recovery Media Creator.
  HARD drive recovery can be started by pressing the F8 key (by turning on the device)-> fix my computer-> drive HARD recovery

• How to restore the system to the first point?

  from the very first point, how can restore my system?
  When I try to make the system recovery, it lets me choose points but I want the system restores I bought today!

  by the way I have folder in my 2nd partition called idk HDDRecovery 13.7 G what is it

  Hello

  In this forum you can find numerous threads on the same topic.
  Haven't you read?

  Recommend doing this to get some background info.

  You can find more info here:
  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• Satellite L300D do I need mediaback disc Toshiba to restore the system?

  I'm not a very technical person and I dropped my laptop!
  Machine did not work and I had a new hard drive installed, but webcam, microphone etc do not seem to work.

  They gave me the laptop put in place as a gift and don't have disks or backup.
  The shop got my documents and photos and I got it up and working with the docs and the internet, but that's all.

  Does only I the mediaback disk from Toshiba to restore all systems?

  Thank you for your time.

  Hello

  You want to get the new laptop and want to put it to factory settings?
  If Yes, then you need the recovery disc.

  The recovery disc can be ordered from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  It s not free but he s also cheap; subject of 30 euros

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP pavilion g6: how to restore the system using a newly installed hard disk recovery disk

  Hey, everything started when I downloaded the new Windows updates after a long period, after downloading the updates, the blue screen appeared, I restarted my laptop and since then, I get a black screen with error oxcoooooe9. I tried to run a test drive and it came with the 0303 error which means that my hard drive needs to be replaced, so I am a new hard drive and the fixed but now when I am trying to restore the system using the recovery disks that came with the laptop, it says incomplete restoration. Kindly help how do I get my system in working order. Also, I tried all 3 options on the recovery disk, still getting the same message. Help, please.

  Hello @Anky11,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the system recovery and he wanted to help!

  For starters, can you provide me with the product number and the operating system of your laptop?  You can use these links to help you find the product and the operating system:
  How can I find my model number or product number?
  Operating system Windows am I running?

  In the meantime, please consult the following documents, as they can help solve the problem for you:

  HP PC - troubleshooting (Windows 8) HP system recovery problems

  HP computers - resolution of the problems of recovery HP System (Windows 7)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Kind regards!

• After "critical update" 12/23/11, my computer is very slow and crashes, also will restore the system.

  After the "critical" update that is installed on my computer 12/23/11 my computer started running very slowly, he drove my Norton anti virus, blocking, I am unable to restore the system. any ideas?

  Hello

  1 update you installed recently? (Please mention the number of KB)

  2. which version of the Windows operating system is installed on your computer?

  3. what exactly happens when you try to perform the system restore?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Fix Windows system on slow Windows performance issues:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  Start in safe mode and check if the same problem persists. If the problem not persists in safe mode, then turn on the computer in a clean boot state and check if that helps.

  Step 1:

  How to start in SafeMode in Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Step 2:

  Put the computer in a clean boot state, and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Check the installation update and try to remove the updates that you installed recently and then try to remove it and check if it helps.

  Remove an update:

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  And also ensure that there are no pending restart, if there are any pending restart, then restart the computer and check if that helps.

  Hope the information is useful.

• I can't in internet explore, at least I have restore my system before 14 Oct automatic updates - everyday__

  I can't in internet explore unless I have restore my system before 14 Oct automatic updates - daily

  Hey Juliette l.

  1. What is the message error that you receive on the Internet Explore after having installed the updates?

  There are many reasons why internet Explorer would not work after the installation of update Windows.

  I suggest that you install the update again and check if the problem persists, try the procedure if the problem below.

  Method 1

  Check if Add-ons on Internet Explore are causing the error. I suggest you try opening Internet Explore mode without modules.

  (a) click the Start button, click all programs, and click Accessories

  (b) click System Tools, click Internet Explorer (No Add-ons).

  How the modules of the browser affect my computer?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-browser-add-ons-affect-my-computer

  How the modules of the browser affect my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-browser-add-ons-affect-my-computer

  Method 2

  If the previous step fails then try to reset the internet settings explore by default and check.

  For more information please visit the link below.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• It is not possible to restore the system, the dates are missing

  Original title: I can't run a system restore

  When I pull up the system restore file, I click on "restore my system to an earlier time" box is empty, what happened, this all started after I downloaded the latest version (I think) of Internet Explorer. Advice please?

  Hi Copecowboy,

  I suggest to go through the steps from the link provided and check if it helps.

  System Restore "restore points" are missing or deleted

  http://support.Microsoft.com/kb/301224

  We can also refer to certain steps in troubleshooting tip from the link provided and check.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/301224

  Hope this helps and keep us posted.