Restore CD failed

Similar Questions

• Restore CD failed on the Satellite A200

  Hello!

  I formatted my laptop Satellite A200 but the restore CD failed!
  Where can I get drivers & installers so I can restore factory settings?

  Recommendations regarding upgrades?
  Help, please!

  Thank you!!!

  Feliks's right. If you install the clean operating system, all drivers and stuff of Toshiba you can find on Toshiba support and download page.

  Factory settings, you can have if you use original Toshiba recovery CD/DVD only.

• System restore image fails - missing Bootmgr

  Recently bought more large hard drive to my PC at home - the system Windows 7 (from my old HD) image successfully created using native Windows 7 system image utility.

  When you try to load the image on my new HD, it seems to work fine, however start fails with "Bootmgr" is missing error.

  Have tried to use the restoration of utility system Windows 7 installation disc, but that does not solve the problem.

  THX in advance for any idea / help

  Hello

  Windows 7 creates a 'Active' partition (drive Q in general) that the system boots from. You got the fine image, but probably not the Q score he needs to boot from. This partition is usually 100 mb in size and the beginning of the disc.

  Here's what I would try first.

  1) boot from the Windows 7 DVD and install it. Don't bother entering your key.
  (2) when it is finished, apply your custom image on the new installation of Windows on the C partition as you did before. This should wipe the installation we just did and replace with your image. The boot partition will be set up and you should be good to go.

  I hope that this help... is not myself, but it should work fine. Mark <> Microsoft Partner

• System Restore keeps failing

  I tried all day to do a system restore. No matter what date choose for a starting point, when the process is finished, a window opens and says "system restore failed and no changes to your computer." It drives me crazy! All I want to do is run a system restore that works. Can you help me please? Thank you.

  Hello

  If you have Norton Internet Security installed, you should first disable Norton Tamper Protection as described in step 2, on the link below.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20091112171719EN&LN=en_US

  Once you are done, turn off the PC.  Windows system restore is usaully better run in Mode without failure.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Choose a restore point, you want and then do the restore.  When you are finished, Windows will restart normally.

  Let me know if you still cannot deliver the issue to run correctly.

  Kind regards

  DP - K

• Clean install / restore to fail Internet

  I'll put up a 2010 MacBook Pro start as new for a next project. After erasing HD for a clean install, the installer returned a message that says El Capitan could not be verified or may have been corrupted. I resorted to the recovery of the internet, but this is also a message that El Capitan can not be installed due to an error. I don't have a backup time machine small enough to drive on the Mac - is it possible forward here?

  Thanks in advance...

  stop,

  Disconnect all external devices

  Reboot into recovery mode

  If the internal collection fails try internet recovery

  for best results, connect your mac directly to your router/modem and suspend any transmission from other devices on your network that can be download or steam.

• Mini 101NR - restore to fail, error message "cannot find the file.

  While restoring my Mini 1010NR with 8 GB SSD from the disk of XP SP3 operating system, everything fine until partially through the recovery an error message saying that it cannot find the i386\ASMS file.

  I tried the options "install fresh copy" and "repair" and get this same error message in both directions.

  I formatted the SDS with both regular and quick NTFS file system. My OSD software gives me the possibility of formatting of the SDS with fat? I have not tried. That I should?

  I looked at the CD, and in the i386 subdirectory, I see a subdirectory called ASMS. I see several subdirectories in this directory.

  I am booting from an external CD/DVD drive. This seems correct, as the installed much restoration program file until stopping in the message saying that it couldn't find the file ASMS.

  This OSD provided with the computer when I bought it new at HP.

  Thank you

  Peter

  The cd is corrupted or damaged or installation loses communication with the CD-ROM drive. If you can, try another cdrom drive.

  http://support.Microsoft.com/kb/q311755/

• restore point failed

  restore point is unsuccessful, unspecified error. Haven't tried the other restore points no chance. My OS is vista basic family.

  restore point is unsuccessful, unspecified error. Haven't tried the other restore points no chance. My OS is vista basic family.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore default fails

  I have all the disks with me.
  The disc of the operating system, the driver and utilities disk.

  I put the OS disc in the drive. I start the pc, press F8 vigorously.
  I can't restore it at some point as none of these points have been made. (recovery point)

  How to delete all the information on my pc, so that I can move forward with the slice.
  The objectives of end is factory settings.

  Dell xps 15-l502x

  Since you have your Windows disk, you can perform a new installation of the operating system. Please follow my link below for the operating system installation process.

• Every time I run the restoration and failed due to the error unspecified durinf restoration has occurred.

  Need help on restoration.

   

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore the system to a Restore Point fails: System Restore was unable to extract the original copy of the restore point consoleDirectory.

  I can create restore points and when updates are installed the system automatically creates a restore point. The problem is that I can't get the system to restore to a restore of these these points.

  System Restore was unable to extract the original copy of the restore point directory

  Source:%systemroot%\registration

  Destination: ComPlusStaging

  Hello John R H,

  Are you able to restore system successfully on a different date, or that you get the same result?  I looked through this thread and was curious to know why you want to perform a system restore?  Having other issues in addition to what you have described?

  Try to make a last good known Configuration and see if you are able to perform a system restore.

  Last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Please let us know status.

• Windows Backup and Restore always fails when you create a system image.

  When I run the Windows backup, it works fine until it gets to create a system image, it goes for about a minute then says "Done creating System Image" then the progress bar turns red. I've already defragged, virus research and checked to find errors on the disk external drive all come with nothing and no help.

  I found this suggestion but have no idea what that means or how to do

  Number 4: Error Code 0 x 80070003.

  If the reparse point is a mount point or a junction point to the root of another volume, you may experience the following issues when you try to restore the files under the reparse point:

  • You cannot restore to the original location if the reparse point directory is removed.

    To work around this problem, re-create the reparse point directory.

  • You cannot restore to another location if you click to select the box restore files in their original subfolders in the file restore wizard.

    To work around this problem, clear the check box restore files in their original subfolders when you run the wizard to restore the file.

  Do you think that would help and please tell me what to do, it's all so frustrating when you have no idea what the jargon means or where access things.

• Restored HDD fails "Genuine Windows".

  I have restored my hard drive from an archive, I took immediately after the upgrade from Vista to Windows 7.

  It is now, saying: I don't have a valid version of windows and reintroducing the activation key do not work.

  I can suspect took archive until I activated and now he thinks its more than 30 days since its installation. What can I do? I had to reinstall my PC has been damaged and unusable and I don't have any other archives.

  Thank you.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  J W Stuart: http://www.pagestart.com

• RMAN restore after failed upgrade

  Hi, I started level of 11.2 in 12.1 using DBUA and the upgrade went bad so need to restore back.

  Its a database of test and I had not expected the upgrade to go wrong (my bad!), so was not as careful as I should have been with pre-upgrade backup and took a backup to cold...

  The last backup I made was a hot rman back, including archived logs, control files and SPFILE.

  Before you begin the upgrade, I've disabled archive logging to save space.

  When you are restoring I started nomount and restored control files. Then mounted and restored database. Everything is good so far.

  Then I tried to recover and he didn't:

  "Cannot find archived log" which I was expecting little.

  I then tried recovery to a point in time, when all archive logs were there:

  run
  {

  until ' to_date ('2014 - 06 - 19:10:28:00 ',' yyyy-mm - dd:hh24:mi:ss');
  restore the database;
  recover the database; }

  There is also:

  "some found goals - abandonment of restoration."

  Is there anyway to get my data back or it is lost forever?

  Thanks for looking

  Adam

  Hello

  Try to run an incomplete recovery (to cancel):

  • Use UNTIL CANCEL: Cancel recovery is usually required after complete healing has no - recovery required an archive or an online newspaper that was missing.

  Check this box:

  http://mnsinger.WordPress.com/2006/08/16/Chapter-27-incomplete-database-recovery/

  Hope this helps

  Concerning

• Success for the RESTORATION but failed on RECOVER - need help

  I was able to run the command 'restore database' and it went successfully.
  But when I run 'recover data', it will stop with error
  
  RMAN-08187: WARNING: media recovery until all SNA 1155620136
  Archive log file name=/oracle/oradsk3/archivelogs/1_94646_700099109.dbf thread = 1 sequence = 94647
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 19/11/2012 05:55:32
  ORA-00283: cool cancelled due to errors
  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' / oracle/oradsk3/archivelogs/1_94646_700099109.dbf'
  ORA-00283: cool cancelled due to errors
  ORA-01112: media recovery not started
  RMAN-06054: unknown request media recovery log archived for thread 1 with sequence 94647 and from the 1155620136 SNA
  
  
  Even though I have this error correctly I can start my database without problem. But on our ERP application, she meet errors such as below
  Error: SQLState QP99P: database error 376 (error 1376) (rcdset.readkastset () in the subject...
  Fatal error: error 1376 (database error 376) on select
  
  What should be corrected for this problem?
  On the other hand, im a newbie to the oracle database. Hope someone could help me with that.
  
  Here are the commands I've done:
  controls:
  1) rman-> enter
  (2) connect target /-> enter
  (3) delete expired backup; -> enter # this will remove all the expired backup set on the controlfile
  (4) catalog starts by ' / oracle/RMAN; -> enter # this will be added all the files in the directory
  (5) overview of restore of database; -> enter # this will test restore backup sets on the database, no real restoration, the test only.
  (6) validate restore them database;
  (7) food that all archivelog validate;
  (8) judgment;
  (9) startup nomount;
  (10) mount the database;
  (11) incarnation of the list;
  (12) to restore the database incarnation 1; -Replace the old incarnation.
  (13) restore database;
  (14) to recover the database;
  (15) Alter database open resetlogs;

  the value of newname for datafile ' / oracle/dbs/Ora11g/MISSING00126 ' to ' / oracle/oradsk3/ERPLN/system01.dbf';

  Are you sure that FILE_ID 126 was system01.dbf?

  until the sequence = 94646;

  should be the SEQUENCE until = 94647 (i.e. the last archivelog to apply more 1)

  recover the database;

  All until the clause should be in the same braces as RESTORE and RECOVER

  Hemant K Collette

• restoration of Internet on iMac fails

  What I need to do on my iMac, it's doing a restore of the internet back to the original operating system for the iMac. I restarted with the command-option-R keys and got into the mode of restoration of the internet. It got to the point of giving me the choice of wifi networks and I have authenticated successfully to a wifi network. Then, after a few minutes, I was presented with graphic of circle with a line through it. Looks internet restoration had failed. Am I missing something? I have to prepare my Mac somehow in order for the restoration of the Internet at work?

  Of your recovery Partition, run disk utility > first aid and tell us what he reports.

  In addition, some additional features on your Mac would be useful. What year is your Mac and what system are you running?