Restore controlfile from

Similar Questions

• Missing files in the command "copy list" once restored controlfile

  Hello

  Perform the restore/recovery exercise (11 GR 2 on ASM), I did the following:

  1 / the DB running, "copy list" in RMAN (to retrieve a list of my backups).

  2 / done one the judgment then went to AMSCMD and deleted all the files in data/ctlfile/spfile manually

  (wanted to test a complete restoration with nothing but archives and backups),.

  3 / managed to restore my spfile with ' restore spfile to ' + DATA...» »,

  4 / then could "startup mount" my DB and restore controlfile with

  «Restore controlfile from «+ FRA/DBNAME/BACKUPSET/2014_01_29/ncnnn...»» » ; »

  5 / then I "copy list" once again

  and here, I saw 3 files were missing (so I started to meet a lot of problems

  so we can still restore/recovery...)

  Someone has already encountered this problem before?

  Thank you very much in advance...

  SEB

  Hello

  When you have restored a controlfile from a backup, it will list only copies or backup that have been registered with this controlfeil, if you want to catalog backups to restore controlfile, you can use the catalog command.

  Thank you

• RMAN - restoring Controlfile

  I'm trying to restore a controlfile from an earlier date.

  RMAN > backup controlfile list

  Full 1463953	71.50 M	SBT_TAPE	00:00:26	14 DECEMBER 14 19:27:11
  	BP key: 1463956 status: EXPIRED Tablet: NO Tag: TAG20141214T192638
  	Handle: ctrl_uaipq5s3l_s54610_p1_t866316405 Media: D05771

  Control file included: cash SNA: 32882311416 cash time: 14 December 14 19:26:45

  The following works:

  Run {}

  allocate channel ch10 device type sbt parms = "ENV = (NB_ORA_CLIENT = myhost)"; "

  Restore controlfile to ' / tmp/test03.ctl ' to 'ctrl_uaipq5s3l_s54610_p1_t866316405 ';

  }

  Yet, using the syntax date breaks down

  RMAN > run {}

  2 > allocate channel ch10 device type sbt parms = "ENV = (NB_ORA_CLIENT = myhost)"; "

  3 > set up to that time ' TO_DATE (December 14, 2014 19:26:45 ',' dd/mm/yyyy hh24:mi:ss') ";

  4 > restore controlfile to ' / tmp/test04.ctl ';

  {5 >}

  allocated channel: ch10

  channel ch10: sid = 976 devtype = SBT_TAPE

  channel ch10: Veritas NetBackup for Oracle - version 7.1 (2011020313)

  executing command: SET until clause

  From restoration to February 26, 15 14:41:34

  output channel: ch10

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the restore command at 26/02/2015 14:41:35

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06101: no channel to restore a backup or a copy of the control file

  I'm set the same channel on tape, but the 2nd syntax fails.

  Anyone has any idea why?

  Change the status of your backup controlfile AVAILABLE with this command:

  BACKUP OF CONTROLFILE CHANGE TAG "TAG20141214T192638" AVAILABLE;

• RMAN restore controlfile error

  I get this error below during the restoration of the control file. my auto backup controlfile is on and its still news
  
  RMAN > restore controlfile to ' / TIFD/dumps/TIFD/backupset/c-916530472-20120830-01';
  
  From restoration to 03-SEP-12
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 12 type of device = DISK
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 03/09/2012 04:42:50
  RMAN-06172: no AUTOBACKUP couldn't find or handle specified is not a valid copy or a piece
  
  
  Thank you

  If you try to restore automatic backup, use
  Restore automatic backup controlfile;

  and the element of particular backup.
  Restore controlfile to ' / backup_dir/piece_name ";

• I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s

  I lose my apps apple makes such as numbers, pages, imovie, garageband etc after restoring backup from my iphone recently brought 6 s why? I just brought a new phone and restore from backup, but after the restoration of my new devices I don't see it.and I pick up on the app store and its application to pay... its happened... there please help me anyone... Thanks in advance

  new phone iphone 6s 128 GB

  iOS 9.2.3

  Are you logged in using the same as before Apple ID? Under the "iTunes and App Store", you can check in the settings menu.

• Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

  Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

  How the thief has changed a lot?

  You do not have a password, find my iPhone ON?

  Read here for the restoration of the backup: http://support.apple.com/en-us/HT201252

• I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

  I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

  Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

  (139893)

• Access is denied when I try to restore files from the Recycle Bin

  Original title: error

  My husband accidentally sent his files to the trash, Einstein he is. When I click on restore everything, I get a code error that reads "C:\ProgramData\Microsoft\Windows\WER\ReportQueue\report0955479c\is is not accessible. Access is denied. "Help!

  Terristreasures

  Hello

  ·         What is the location of the files that have been deleted?

  ·         Have you logged as administrator?

  ·         You try to restore the Recycle Bin of your husband or your account account?

  ·         You can access the location of the file mentioned in the error? (C:\ProgramData\Microsoft\Windows\WER\ReportQueue)

  To view the location of the file error try to enable hidden files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to manually restore the file from the Recycle Bin and check.

  (a) on the desktop, double-click Recycle Bin.

  (b) to restore a file, right-click and then click on restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Method 2:

  Also I suggest that you start in safe mode and check if you can restore files from the Recycle Bin.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

   

  Method 3:

  If you are not able to access these files try ownership of the folder and check if you can restore the files.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Cannot restore files from a user to another account.

  Original title: resumption of Contact and e-mail and account sharing.

  1. impossible to re-establish contacts and e-mail in Outlook after the computer crashed.  In others, I can't import the pst file in my Outlook.

  2. unable to give files, music, etc. on another account on my computer.  I have two accounts (people) on my computer.  After the computer crashed, I restore files, but may not give other people behind their files, the muisc, photos etc.

  Hello

  • You use Windows Backup and Restore feature, or any third-party backup software to backup & restore files?
  • How do you try to restore files?
  • Do you have any code or an error message when you try to restore data from one user to another account?

  To restore contacts and emails in Outlook, you can ask your question in the Microsoft Office community on this link:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Please provide us with more information about the issue so that we can provide you with assistance.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restore data from a CD after format hard drive. Backup and Restore Center.

  I had a virus problem in my system.  I was asked to back up the data before they formatted my hard drive.  I used the backup and restore - 33 CDs Center.  After picking up my computer (they have reinstalled the operating system - Vista), I was unable to restore my data.  When I try to restore it, I get this message "there are no backups available on this computer.

  Hi happythinker321,

  1. How did you create the backup?

  You will need to use the advanced restore feature and check if it works.

  1. open the Center to backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click backup and Restore Center.

  2. click on Advanced Restore Options. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on files from a backup made on a different computerand then follow the steps.

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Also check if the backup CD contains files whose extension is like. BKF

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot restore files from the point has up on toshiba vista 32

  I backed up my files on DVD. I did a complete reinstall of the computer. Now when I try to restore files from the backup of the file. It won't allow me. I tried to restore, in ways that shows on my computer. I managed on the base to get the files on my computer, but not the files.
  Help, please

  Hello h20sdavid ·         Are you able to browse the files that are created in the backup? ·         Requires external drive that you are installing the software and/or before pilots to use and you have installed them after reinstalling Vista? ·         What is the error message you get when you try to restore the backup? You can try to change the drive letter for your external hard drive and check if you are able to restore the backup. 1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 2. in the Navigation pane, click Disk Management. 3. right click on the partition or drive that you want to change and then click on change drive letter and paths. 4. to change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK. Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Restoring files from DVD back to Windows 7 Home Premium

  How to restore files from DVD discs created as a return to the top on my computer?

  To restore the files on your DVD drive, you can simply insert the disc into your DVD drive and copy files directly to the desired location on your computer.

  If you have created the DVD disc is a recovery disk (a disk you can use to restore Windows when Windows does not work properly), you can consult the following Web page to understand how to use it:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  Hope this will help you.

• Is it possible to restore DB from a backup obsolete?

  Hello
  
  Is it possible to restore DB from a backup obsolete? In the affirmative. How?
  
  Thank you
  Rajesh

  Catalog your backup again to restore. Please read the Sub paragraph.

  Cataloguing of the older files in the recovery catalog

  If you have copies of data file, backup or archive items writes to the disk, you can catalog them in the recovery catalog using the CATALOG command. When you use a recovery catalog, cataloguing of older backups who have aged in the control file allows you to use older backups during operations restore RMAN. For example:

  RMAN > CATALOG DATAFILECOPY ' / disk1/old_datafiles/01_01_2003/users01.dbf';
  RMAN > CATALOGUE ARCHIVELOG ' / disk1/arch_logs/archive1_731.dbf',
  ' / disk1/arch_logs/archive1_732.dbf';
  RMAN > CATALOGUE BACKUPPIECE ' / disk1/backups/backup_820.bkp';

  You can also catalog several backup files in a directory at a time, using the CATALOGUE START WITH command, as shown in this example:

  RMAN > CATALOGUE START WITH ' / disk1/backups /';

  RMAN lists the files to add to the RMAN Repository and guests of confirmation before adding the backups.

  Be careful when you create your prefix to CATALOGUE START WITH. RMAN scans all the paths for all the files on the disc beginning with the specified prefix. The incorrect prefix may include more files that you intend. For example, a group of directories/disk1/backups, / disk1/backups-year2003, / disk1/backupsets and/disk1/backupsets/test and so forth, all contain backup files. The command

  RMAN > CATALOGUE START WITH ' / disk1/backups ";

  lists all the files in these directories, because/disk1/backups is a prefix for paths to these directories. For only backups in the/disk1/catalog backups directory, the correct command would be:

  RMAN > CATALOGUE START WITH ' / disk1/backups /';

  Concerning
  Asif Kabir

• Restore database from a specific location

  Hello

  I'm on 11.2.0.3 on Windows 2008.

  I have a backup of my database of production on the network drive and I need to use this backup to construct my test database. To build the database of test, I copied the backup to network drive on my local drive on the test server and then restored the controlfile. After that, I catalogued the backup to local drive.

  Now, RMAN can recognize the backup on the network location (as controlfile has all the information of all backups) and also local backup. If I try to restore, it goes on the network to get to restore backupset. Is there a way I can ask RMAN to use my local backup rather than go on the network for the elements of the network drive backup?

  I know there is a "uncatalog" option available, that should be used for each backup piece and so tedious.

  (1) can I force RMAN to use my local backup only without going to the network drive for the archives?

  (2) at - it order to complete wipe all backups in a swoop of the repository so that I can catalog only local backups before I run the restore command?

  SAQ

  Yes, that's what I did.

  I should end this question by concluding that there is not available for the following commands

  (1) cannot specify backup location in the RESTORE command to mention a specific return, if there are several backups available.

  (2) there is no single command to remove all items from backup to a single backup set, from the RMAN Repository

  SAQ

• Path of redo logs after restoring controlfile

  Hello!
  
  After restoration of the controlfile I see distorted redo logs metadata (column v$ logfile.member):

  $OH/dbs/data/ora/MY_SID/rlog/redo1a.log

  in the redo logs placed in another directory, source database
  also I should drop logfile member and log file groups, and then create them again, but may be there other way to solve this problem?
  Please notify.
  I'm usung 11.2.0.3
  
  Thank you and best regards,
  Pavel

  As I said earlier, is that your database is working well? If so, then forget those files which are present in $OH/dbs/data/ora/file/rConnectez/MY_SID. Ok?

  Suppose now, the question is what are these files? Who created/copied?
  So the answer is if these files are used by your this database (MY_SID); that can be confirmed by query:
  Select Member from v$ logfile; then the redo logs are used by this database else chances are these files were the first part of this database, but not now due to may be a corruption that happened, so another / previous DBA has left.

  And if the database is not running, then what is the error you found it please post it here; otherwise leave these files such what.

  Concerning
  Girish Sharma