Restore full Internet on nine hard drive?

Similar Questions

• Windows XP Pro - Restore backup full to the new hard drive Questions

  My HD player (only four years, ARGH) for my Dell Dimension 4700 threw the sector of disk errors in Event Viewer.  I tried disc analysis to fix and it did not help.  I did a full backup, including the State information system on an external hard drive using backup utility Windows XP Pro.  I don't have an emergency boot disk, just the XP PRO installation disc.

  I have the new drive (Sata 320 GB rather than Sata 80 GB) installed and loaded with Windows XP again.  I am able to connect and fix the external hard drive and want to restore my old information.

  I think that I should restore the backup file using Windows XP with security, junction points, and above all, preserve the mount points for the reader verify that Yes.

  It is the appropriate procedure to restore a full backup to a hard drive nine?

  Restoration of the old registry to the backup will damage the install drive?

  Thank you

  RCH2330

  
  

• Windows XP system restore Boot Failure with new hard drive

  HP Touchsmart IQ546t running Windows XP Home Edition

  Here is my story:

  A few months ago my PC was informing me that a hard disk failure is imminent and how can I back up my data.

  I was able to get most of the data backed up and has continued to use the PC.

  Finally, the hard drive failed.

  Not being not able to find system restore disks, I ordered a set of HP.

  In the meantime, I was able to save the rest of my data using an external hard drive enclosure, a laptop and a backup disk.

  I used system restore discs to erase the hard drive and restore the operating system.

  After the successful restoration, I was able to boot my PC and use it for a few days, but again became imminent hard disk failure message. Yet once again, the hard drive failed and I was unable to use it.

  I decided to replace the hard drive, thinking I could install and use the system restore disks to get the installed operating system.

  I followed all the instructions, I find and could not start the machine to the point he will recognize the recovery disc. I receive a message that tells me to insert a bootable media.

  Does anyone know what I'm missing here?

  Is there something I can try to get the hard drive to boot to the point he will recognize the recovery disk?

  Thanks in advance for any advice.

  Hello

  OPS, sorry on this subject.  If the recovery discs are not recognized not so you act have a problem trying to get the new HDD to be restored.

  Try the procedure below and see what happens.  View your results.

  Cyberlink CD recovery for hard drives. When you created this CD, insert it into the system that fails to start, restart, and wait until you see a window with a green check mark.  Next, remove the CD and insert your first recovery DVDs.  Reboot the PC and go through the process of installing the operating system again.  If all goes well, it should install properly this time.

• I'm trying to restore access to my external hard drive.

  I'm trying to restore access to my external hard drive. I want to support.

  

  Encryption key is not the kay of recovery?

  Sorry, I'm not an expert on encryption. Here are a few options:

  • Check out this link.
  • Start a new post with a descriptive subject line (for example "how to decipher... »). Be sure to include the name of the used encryption tool.

  Since I essentially answered your original question I would that mark you my answer as "response" to this topic.

• How can I make a DVD of the restore hidden in my external hard drive partition recovery

  How can I make a DVD of the restore hidden in my external hard drive partition recovery because I want to recover my toshiba satellite L840 that does not respond directly to my hard drive so I put my laptop to an external HARD drive and then I want to copy a DVD recovery partition

  Your question is a bit confusing, you can boot the laptop at all? Have you tried booting in safe mode, you can make a recovery DVD set from there, the folder Toshiba.

  With the drive in the Toshiba, you should be able to use a F, F10, F11, or F12 key to activate the installation from the partition hidden started upward.

  Otherwise, you can contact Toshiba, and with the model of the product id number and the laptop for Windows, you can buy a set of disks.

• Time Machine restore on nine hard drive Crash

  Hi people, so here is the scenerio... End model 2009 IMac 3.06 ghz Intel Core 2 Duo, screen 21 1/2 in., 500 GB, 12 GB of ram installed, the year has been saved on external hard drive Time Machine 2 giga... The computer has been works fine, the only thing I had to improve more of hard drive space, bought a Seagate 2 TB, SSHD (ST2000DX001), checked with OWC internal drive and they said it was compatible, Swap out went good, but when I went to restore the new drive on a time Machine, the installation of the time machine crashed I tried 3 times

  so I started fresh and installed the operating system and set to update all the way up to 10.11.2 el captain (of the installation disc 10.6.1) so the material looks good, but I really need my system to the way it was, music, ITunes, Safari and registered Web sites and my files important work

  I just did a check for first aid at the back of the drive, come good... any suggestions would be appreciated, thanks

  Is there any system or Crash logs from the time of the TM install crash?

• System Restore op after failure of HARD drive and replacement

  Hello

  I have an old laptop dv9000 with XPPro factory installed SP2, since upgraded to SP3. The hard drive failed (Seagate 80Gig). I checked with the test of the bios Setup, he said "fail" and I checked by booting from the windows installation disc CD player. He said, not found hard drive. SO, I bought a disc bytes of more 1 t (same mfr Seagate, same 5400 RPM) and installed. I have a backup network (Seagate Black armor) drive and I was able to restore the last backup. The booted cd drive the recovery disc for this program, the hard drive light blinking and it seemed to be something for 3 hours, then told it was full.

  But the new drive does not start. I've read on this forum and of the joint recommendation was to use the system provided with the laptop recovery disks. I dug through the boxes in the garage and have found the system recovery discs and my 14 cd makes system restore. :-) makes to keep unwanted sometimes. But I tried the system recovery disk and it will not start in the cd player. I get a white screen with the cursor in the left flashing top. I went back to try the recovery of Seagate disk, and now it will not start either. I tried to remove the new HARD drive. with or without a cd in the player it displays the message "No Op sysytem found." SO I think that something touched the CDdrive. But it is interesting with the blinking cursor will restart the machine, then perhaps a part of the op system is loaded.

  It is an old machine, the old system of the op. I shopped Hp store and only Windows8 available now. SO I am forced either on the cutting edge with all new bugs and learning curve, or I'm trying to get this old lady will machine. Other things I've linked, hard reset, restore the default bios.

  Ideas that you may have will be appreciated.

  Hello

  The laptop is back running with the new hard drive, Yay! and a new cd player.

  Here's what he had to, for anyone who has ever has the same problem:

  The CD player was bad. The nearest local supplier on the list for assistance parts hp gave me was a suitable replacement. I installed, and the system restore disc started and ran immediately.  I decided to check and see if the windows install disc would go and restore the sytem since I thought that I had already restored the entire C: partition. He started, but did not find the hard drive. He gave an eror message that does no drive found.  I went to the hp system restore disc and running. It took several hours reformatted the drive (by removing everything I'd put) and rebooted several times. Eventually, he came with a windows desktop computer. This is the factory installed there are over 5 years old. I installed the Seagate backup software and running. He seemed to have more options running in windows he did directly from the boot cd. One of the options was to restore the MBR. I had to find out what it was, Master Boot Record. I thought that it should be restored. The full restoration of the backup process C: took another few hours, but he finished and gave a message of the operation successfully.

  Then I rebooted and got windows, connected and got my office logon screen as it was at the time of the backup. Success.

  In the future, I'll watch that restore MBR, maybe it's there, and I missed it the first time. I have a slight nagging worry that maybe something else caused both drives to fail almost at the same time. But I'm not going to fuss with it. I hope that the machine works well for a little longer.

  Thanks to those who have tried to help.

  Later,.

  Dyno

• Is it possible to use the Acer restore disks on a new hard drive?

  The hard drive on my Aspire 5251 appears to be dead. He was behaving erraticly and we tried a full restore via the program eRecovery a couple of times and it is always wrong (error 0x45d). We also tried discs that we did when the laptop is new with no luck.

  I bought and installed a new hard drive, but can't get the disks to install on it either. I'm guessing that it is looking for something partitioned the original hard drive because he says that something is missing. It is more under warranty and I can't figure out how to order the full install discs from Acer. Is it possible to get these recovery discs to work?

  Also, FWIW, I installed Ubuntu on the new hard drive just to see if it works, and it's so I know everything works at least.

  TIA

  Yes, you can use your Acer restore on a new hard drive disks. If you have installed ubuntu, you may need to format the HARD disk and to create a partition on the disk hard so that the discs work.

• Restore Vista on the new hard drive in an old computer

  I had to replace a hard drive on an old computer running Vista, and I don't have a restore disc.  BestBuy has provided the activation code of the version of vista on the old hard drive, and I was told that I could contact Microsoft and download Vista to restore on the machine.  Can you help me?

  Moved from Vista programs Forum.

  Hello

  Microsoft supplies more downloads Vista >

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Restore questions after replacing the hard drive

  I have created a backup image and restore full of my computer after getting the hard drive errors via the MS utility on a USB key.  I replaced the hard drive internal and restored Vista using recovery disks.  Now when I want to restore the backup, Windows is not recognize files of backup/recovery.  What am I supposed to do?

  Hello

   
  Since you have replaced the hard drive and you try to install Windows on the new drive. Whenever the hard drive is replaced, the operating system must be reinstalled and restore all data you have saved
  
  You can check out the link and check if it helps:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
   
  If the previous step fails, then try to restore the files by using the Windows recovery options using the link below.
  Restore your computer from a system image backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also check out the link:

  Recovering your files in Windows 7
  http://blogs.technet.com/b/filecab/archive/2009/11/12/recovering-your-files-in-Windows-7.aspx

   

• How to restore my backup on external hard drive system

  I did a windows image backup of my Vista system on a Seagate external hard drive. Now I want to restore my system from the backup, but restore in control panel procedures does not recognize the files. Version of Vista professional, Service Pack 2. I tried Virtual PC, and vhd mounting procedures.

  Hello

  read this tutorial on how to do

  To restore a full backup of the computer, you must proceed within the Windows recovery environment. To access the Windows recovery environment, you will need to insert your Vista DVD in the DVD drive on your computer and turn on your computer. The computer starts and you see the BIOS lists the hardware on your computer, and other information. When this information has been disabled, your computer will see that a bootable DVD is inserted and present a prompt similar to the Figure 1 below.

  etc.

  etc.

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

• restore the Firefox bookmarks on hard drive XP vista

  I got a pc running xp, he's dead, I now have a laptop running vista, ive tried to import bookmarks from the old drive hard through a usb port connect but little matter I do this new installation of firefox on vista won't recognize the old bookmarks files.

  bookmarks xp files are JSONLZ4

  Vista firefox insists that I find a JSON file only

  How can I restore my old favorites from the hard drive to the vista version of firefox?

  This is the second time ive bookmarks/not able import... not a bit happy.

  Just to confirm what you already know, a compressed file LZ isn't human readable. Open in a Firefox tab will look like gibberish.

  LZ files are supposed to be restored using the Firefox Restore command in the Library dialog box, as described in this article: restore bookmarks from a backup or move them to another computer. Is that where you got the error "unsupported file type"?

  An .ini file is a text file that contains data of settings. Each profile folder has a block of 4 lines, and the active profile folder has a fifth line. Based on your former name of profile folder, you could open the file in Notepad and add this at the end (it should be a blank line above it):

  [Agroalimentaire1]
  Name = OldProfile
  IsRelative = 1
  Path = Profiles / rnnl7h07.default

  But since I am squinting at a screenshot, you can correct this way if I do not have the right characters. Save and close this file.

  Then you can try to switch to this profile using the Firefox profile manager. To do this:

  Out of Firefox and start in the profile using Start Manager > Search box (or run):

  firefox.exe -P
  

  Be sure not to remove all profiles here.

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  You should be able to select OldProfile and launch Firefox with the old settings. It runs?

• Satellite A200 - 196 how can I restore the Partition from Toshiba hard drive?

  I need to restore my hard drive to factory default.

  I tried now pressed the 'Zéro' key at startup, also tried one at a time, hold down F2 and F8, F10, F12, but none of them put me in the Recovery Wizard.

  I searched the help files on the PC and online but nothing helped.
  Someone at - it an idea how I can get into the recovery partition it please?

  Hello

  You should be able to start the installation of HARD drive recovery as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please note: this will not work if your laptop works with the factory settings. If you have used clean OS installation HDD recovery no longer unavailable. For the installation of factory settings, you must use disk recovery DVDs.

  Everything must be described in the document s user manuals.

• Re: Satellite X 200: Vista restore after format low-level HARD drive

  Hello

  I would like to know if the CD of my Satellite X 200 recovery tools is able to restore my drive after a low-level format?

  Waiting for them, thanks a lot.

  Hello

  The use of the Toshiba Recovery CD would be to format the whole HARD drive and to relocate again the entire image of Toshiba.
  This means that all the operating system Windows Vista, Toshiba drivers, tools and additional software would be installed on your HARD drive 200 X.

  I hope this is the information that you need.

• Windows 7 update history not showing after restore the Image of external hard drive

  I just restored windows 7 from a system image on an external hard drive.  When I used windows update after restoration update history had disappeared, although I found the updates in the updates installed, I wonder if something is wrong and if all my updates are in place and why did do that AND, can I GET BACK. ?. ?. ?. Everything seems to work fine... /.
  Thanks and let me know.
  Dave

  Hello

  The version history is just a list containing the results of the applied updates and non-operational systematics
  importance. The installed updates is the important file that shows what updates have been installed.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.