Restore my system completely!

Similar Questions

• System Restore didn't complete-no specified error

  I did a system restore but it says that my system restore did not complete due to an unspecified error.  I Redid the catering to a different date, as suggested in the troubleshooting with the same result.  My Kapersky is off so it's not the problem.  It's never happened before.  I have Vista.  Any ideas what to do?

  Hello Rayndropss,

  Often we see error messages like the result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• When runing the system restore, I get a message says, "System Restore did not complete Sudessfully" the reason why it gives States "an unspecified error occurred during system restore.

  When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• System Restore: restore the system on windows v6 is completely unpredictible. I have complained__about this to Microsoft with no response.

  Several times, even after doing a system recovery, which restores you computer Setup, I would try sometimes to try restoring the system Windows Vista. How in the name of carnations, "system Restore" fail to restore to a chosen restore point and indicates that the system restore has been
  unsucessfull even after making a full recovery of the system?   I asked Microsoft through some corresponce on this problem.  No response from them.
  I also believe that when I bought the computer, the windows (OS) v6 was not complete, is why Microsoft had to develop the SP1 and SP2 as a Patch.
  Windows 7 may have solved that problem, however. I think that it is totally unprofessional and unethical, especially when you have to pay somewhere between $100-$200 for Windows 7. Also, don't waste your time talking to a microsoft technician, because many of these people are in the Philippines or the India and less you do know. In addition they will charge your card credit $49-59 $ by incident, and the service they provide to solve your problem is not competent. Then you must dispute the charge (s) with your credit card company in order to remove.

  As for me, my next computer will be a GICA (Apple) or Macbook Pro which has simplified superior of the operating system and
  has no problems that any (OS) has with Microsoft. In the meantime, because of the way microsoft conducts its activities until they come out with a "patch".
  as an update to windows or what ever:

  [1] do not use Windows system restore if you have a problem with your system and must go back to an earlier time.
  [2] I would suggest that you restart your computer, and when rebooting press and hold F8 until see you highllighted with the cursor options. Move the slider down to "restore your compare to last good configuration ' and press ENTER. (You can also enter the BIOS and do the same thing) and then wait for your computer to restart.
  If your like me, because of this problem I reinstall my full operating system, but still once attention - system restore may not work.
  [3] do not try and reinstall the system restore .exe - because once again because this will not guarantee that system restore will work.
  =========================================================================================================
  Good luck.

  Here's the rest of your rant in repair and recovery Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/d0bf6bfa-41A3-4c15-919e-0bcd98051833

  Richard Layton.

  "By the way. anyone interested in filing a class action against Microsoft. PLSE contact me at Email removed privacy. "

  Have you finished?

  It is NOT Microsoft.

  These are public Forums, hosted by Microsoft.

  We are colleagues help Vista users to give FREE in our own SPARE time.

  It is your choice what you buy in life.

  Good luck with your Mac.

  See you soon. Mick Murphy - Microsoft partner

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• After "critical update" 12/23/11, my computer is very slow and crashes, also will restore the system.

  After the "critical" update that is installed on my computer 12/23/11 my computer started running very slowly, he drove my Norton anti virus, blocking, I am unable to restore the system. any ideas?

  Hello

  1 update you installed recently? (Please mention the number of KB)

  2. which version of the Windows operating system is installed on your computer?

  3. what exactly happens when you try to perform the system restore?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Fix Windows system on slow Windows performance issues:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  Start in safe mode and check if the same problem persists. If the problem not persists in safe mode, then turn on the computer in a clean boot state and check if that helps.

  Step 1:

  How to start in SafeMode in Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Step 2:

  Put the computer in a clean boot state, and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Check the installation update and try to remove the updates that you installed recently and then try to remove it and check if it helps.

  Remove an update:

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  And also ensure that there are no pending restart, if there are any pending restart, then restart the computer and check if that helps.

  Hope the information is useful.

• My restoration of systems said that it cannot restore the dates, I've tried. What could be the problem?

  I played Solitaire Easter when my XP screen turned blue with the notice of a serious error had occurred.  One proposed remedy has been remove recently installed software and that was AVG Linkscanner and use the systems I tried using two different dates, which brought the response that systems of restoration cannot restore to each date.  What would prevent restore work systems?

  Hi MissLizz,

  Thanks for posting the query on Microsoft Community.

  It would be great if you can answer the following questions:

  1. What is the accurate and complete error message when you received the blue screen of death?

  2. What is the full and exact error message when you try to do a system restore?

  I suggest to refer to the article and follow the steps in advanced troubleshooting to solve the problem with the system restore:

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  I hope this helps. Let us know if you need more assistance.

• I want to restore my system but it won't work, it says look at the event 0 x 8100202

  I had nothing but problems lately, I can't open the Security Center, I can't open my documents folder and probably none of the others. I tried to run SpeedMaxPC, and it found 217 problems!  But, the computer won't fix them, it is said that the program to quit running.  Now, I can not restore the system I get an error code "event 0 x 8100202.»  I AM a COMPLETE BEGINNER, I don't know computer language or I'm real good with computers but I can handle the basics, which is what I do.  But, I'm not going to school online, so I need all this works.   I also can't update security service Pak.  I downloaded SuperAntiSpyware and scanned the devil on this computer and Security Essentials, and they both say that I'm not infected.  I really need some help here, please.

  This refer for more information: http://social.technet.microsoft.com/Forums/en/itprovistaapps/thread/79f510fa-44d9-4ea7-a0a9-6a0a8320796d

  http://www.cybertechhelp.com/forums/showthread.php?t=193814

  http://www.SevenForums.com/performance-maintenance/144374-what-should-i-do.html

• The woes of restoration: the system is a hypocrite!

  I just got my back office of the repair shop where the initial vista (I think it's the original version) had to be relocated because of various infections.  I was a good girl and had already backed up everything on an external drive.  I went to the restoration, makes restoration advanced and this bitch said I had to change the user ID to match the backup account.  Unfortunately, your valuable system few dislikes "------" more so I can not match user accounts.  Without it I can't get my files to restore.  And if this question sounds familiar, it should.  Poor Mary Ann tried to ask the same question and you people told her that she had to repost a new thread instead of just do us a favor and answer.  I am furious because I don't have how to find the thread of Mary Ann and his problem is exactly the same as mine.

  Much appreciated,

  Erika

  Hello

  This isn't our "precious little system.

  and we have no idea who is Mary Ann

  This is not microsoft

  These are public forums, led by microsoft and most of us come here im our own time and give free support

  for problems using the backup and restore process, read the information below or repost it in the correct forum;

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• restore multiple system files from Recycle Bin by using the command line

  Hello world

  I ' v done gone wasted with this one

  I downloaded a third party software to delet all files duplicate on my laptop

  unfortunitly I completely forgot I had put all the files in the files of system including visible on partion 1 running windows 7, bye bye file system

  Now, I can't find my installation disk to restore the system files and don't have not one partion factory repair, also I can't start in safe mode with command prompt.

  what I got is windows server 2012 on the partion 2 that works very well

  I found the folder bin recyle for windows 7 opperating system while in server 2012 what I want to do is to restore all the files not only some like fortunately we who will get all my files back in there right posion with fear that the time spent...

  

  now, there is another way I could restore these files but unfortunitly I don't have enough room in my score didn't do the restore

  I found under the disk management Explorer/properties/previous vertions, but did not...

  

  appoligies for the bad spelling

  Any help would be appreciated

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Is there a way to restore the system to factory setting

  Original title: Reinstalling windows

  I would like to restore or reinstall the system on my computer because my computer appears to be infected with the virus and there are a lot of problem with the system as impossible to install net framework. I have never create any point before restoration, and the recovery of the manufacturing company (Acer) tool does not work for reasons unknown. I would like to know if there is a way to restore the system to factory setting. And also, if I have the windows 7 key product that comes with this computer (I think that its probably an OEM product key), what I have to buy a new key of product if I reinstall windows 7 on this computer?

  Thank you for your reply,

  However, I tried with the Acer eRecovery Management and there are two problems:

  • I open Acer eRecovery than Management with System Manager. When I click on restore or create Factory default disc, it says please wait and there is an infinite loading.
  • Also, when I use Alt + F10 to open, it says please complete operating system configuration process.

  Scores of recovery and/or access to them can get damaged.

  As the partition recovery is photographed on the hard drive by Acer in the manufacture of your machine, we have nothing to do with changing/fixing this recovery process once there are problems with it.

  As you have a preinstalled OEM license (Acer, Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  But Acer does not normally keep recovery disks for you to buy for older operating systems, so it comes down to borrow the exact same edition of Windows 7 DVD to a friend, etc. and by using the product key on the COA sticker on your machine.

  This is what looks like a sticker of COS:

  

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  Your other option to continue to use the machine is to remove malicious programs that infect your machine:

  See if this helps you:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Once you are sure that the malware is removed, check the system files.

  The problem can happen however is that if SFC is install system files that are corrupted, you may still borrow this disc of windows 7 to solve this problem by performing a repair upgrade.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Restore the system (win7) after upgrade to Windows 10

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  Posted by niikos
  

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  There is no solution?

• I have recently had a hard drive crash, fortunately everything was backed up, but I can't find my Firefox bookmarks in the back upward to restore my system, can anyone help?

  I have a fill Windows backup of my hard drive took about 12 hours before the drive failure. I restored my system, but have failed to find my previous favorites of my previous version of Firefox. I guess I asked which folder they are in the backup system?

  All your data such as bookmarks, passwords etc., is contained in a folder called 'profile '. See: profiles of boards - where Firefox stores your bookmarks, passwords and other user data

  You can recover your data from the old, if it is still intact and move it to the new profile. This article explains how to on this issue: use of the Profile Manager to create and delete profiles Firefox

• Satellite P300D-136 - how to restore the system?

  Hello

  I own a Toshiba Satellite P300D-136 with Windows 7 (64-bit) and I want to restore the system. I've tried the way by clicking on the value 0 or F8 at startup, but it does not :-(

  The HDDRestore Partition is available...

  Best regards

  Andi

  As far as I know Satellite P300/P300D comes with Vista and not with Win7 for Win7 installation drive recovery HARD work not at all. You can install Vista, maybe, but certainly not Win7.

  Because of this, I assume that you have installed your own version of Win7. Can you confirm this?

  Is that HARD drive recovery facility (F8 > fix my computer) works with the installation of recovery only (out of the box).