Restore system continually failed.

Similar Questions

• Updates for 32-bit system continually fail

  Original title: update windows 32 bit dor

  updates for 32-bit system continually fail.  My system is 64-bit

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• The system continually restore fails

  I am running XP Home Edition & I tried the system restore, but it fails. I did it in Safe Mode, still fails. I disabled Norton & still not good. I did the test, creating a Point of restoring TEST & test Desktop folder & it worked. But it will not restore to an earlier date. I tried going back a month dates & still does not work. Any ideas?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• The HP Pavilion dv7-3065dx system recovery failed

  I'm trying a recovery of my CV due to problems that fails to fix with Microsoft office and Photoshop which will not at the restoration work.

  I first used the recovery disks that I did when I bought the computer and ended with "the system recovery failed.

  I then tried with the help of the partition recovery and restore to fail again

  I bought the HP discs to do the recovery and still the same thing. In case of failure

  I read that it could be because of my internet connection, but it is a compressed and wireless and I do not have access to the router connect physically, the internet is password protected.

  I always get the computer to go through all three disks, System Recovery DVD Windows 7 Edition home premium 1 and 2 as well as the Application and driver recovery CD, then he starts the third CD and continues processing but in the end, I get the same message, "the system recovery failed.

  I contacted HP for assistance but they want $99 for the help, I am low income and can not even afford and tech IT much less $99 so trying to fix my computer on my own. I was able to make my daughters Toshiba last week so am able to talk right now, but my computer isn't end of recovery

  I save the file showing what was going on but don't know if I can put it on this post and do not know how to open it up to copy / paste

  Hope to hear from someone soon, thank you very much

  PJ

  OK, thanks, I got it today. It seems that my hard drive is about 450 GB, which is nice. I thought that it was more room there to 58 GB. I will definitely get this fixed. He said that I have 408 GB unallocated, so now I can get it fixed. You've been a great help thank you

  Paula

• Silverlight KB2847559 security update continually fails to install

  as stated above:-silverlight KB2847559 security update continually fails to install on my windows xp system. Please explain.

  Option 1 - uninstall/reinstall Silverlight and apply the updates

  http://support.Microsoft.com/kb/2608523/en-AU

  Option 2 - check Silverlight

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  Hi all

  I'm looking for information on the guide follow error

  ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  ORA-27301: OS Error Message: not enough memory is available to process this command.

  ORA-27302: an error occurred at: ssthrddcr

  Thank you
  Waqas

  Please don't be crazy on me, but in my opinion, this is the wrong place for your question. The fact is that Toshiba doesn't support Windows 2003 server for mobile computing. If you have problems try again with Microsoft.
  As a manufacturer of operating system, they should be able to offer an explanation for each error message. Sorry, but I see no connection between the problems described and Toshiba as a hardware manufacturer.

• I have no sound on my PC. Recently, I removed some programs, Soundmax. I tried to re - install all the programs 'restoration systems.

  I have no sound on my PC. Recently, I removed some programs, which is Soundmax. I think it is the reason for my problem. I tried to re - install all the programs 'restoration systems. Without success. .. .telling me it can't restore to restore the date that I choose. Help?

  original title: no sound

  Try to reinstall the driver from the manufacturers website. If this does not work, go through the steps detailed here: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• Update for Windows 7 x 64-based Systems (KB2345886) fails

  Update for Windows 7 x 64-based Systems (KB2345886) fails everytime. I have restarted my computer several times now. Whenever I do, update indicates "Failure configuration Windows updates" and I have to restart again. Whenever I am able to log in again, it says that I have to restart my computer to perform updates. Once I've done this several times now. What's wrong? What must I do to fix this?

  You receive errors related to updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information.
     Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.

  Follow the links in the Windows Update dialog box under more information or help and Support to resolve the problem, then try to reinstall updates by using Windows Update in Control Panel or by mail with the error code and maybe someone may be able to help others.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• During the restore system to a previous restore point, I got this error 'access denied 0x80070005.

  original title: 'access denied 0x80070005.

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  Possibilities:

  1. you are not the administrator. You don't have to enter the admin password valid when he asked for it.

  2. you probably have the problem with the infection by the virus.

  If you ARE the admin, suggestions:

  a. run a full scan.

  b. If the machine is clean, do your Safe Mode system restore.

  How to go in safe mode?

  Restart > immediately and repeatedly tapping the F8 key until you see a black and white scree > top? Touch down arrow, and then select Safe Mode > Enter > now that you are using safe mode. Make your system restore.

• Today, the two disc cleaning & restoration system freeze when I am at the point to run the end process

  both disk cleanu & lock-up @ last execution stage of restoration system

  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
   
  --
  ..
  --
  "denroxi" wrote in message news: 64ffc529-7d1f-4347-b3d9-b05cc03ccede...
  > both disk cleanu & lock-up @ last execution stage of restoration system
   
   

• After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

  After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

  First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

  I hope this helps.  If this isn't the case, after return and we'll see what we can do.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: alert! Previous attempts to start this system have failed at checkpoint [size].

  I tried upgrading the video card in my dell dimension, but doing so caused this error, error: alert! Previous attempts to start this system have failed at checkpoint [size]. I removed the new video card and put the old one back, but the error still occurs. Any help on how to fix this error would be much appreciated.

  Not necessarily...

  Power off, unplug... Remove the motherboard battery... Remove all memory modules except to location 1. Reinstall the battery and see if it boots now.

  Then, repeat the process and share all the modules on the slot 1, one at a time until you ID a bad module. If they all work in location 1, add modules one at a time for other locations until all are reinstalled and it boots or you ID a bad location.

• EMP 11.1.2.3 System Installer fails to install the Oracle DB, 32-bit and 64-bit Client

  Hello

  We are trying to do a fresh install of Oracle Hyperion EPM 11.1.2.3 on Windows 2008 Server R2.

  Its a standard deployment with a Foundation Server and an Essbase server.

  When you try to install on the server of the Foundation, the EPM System Installer fails to install Oracle database customers.

  The first Question we have is, we have decided using Microsoft SQL Server for the repository of Shared Services and therefore would like to know if it is safe to ignore this error and move on.

  The second question is, if we need the error pending, we want to know why the installation system fails. Looking at the newspaper, ORACLE_HOME is on something that is not valid or is longer than 128 characters.

  The Diagnostics show the below error message:

  NEWS: Will copy both pre and post copy copy files C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Install Properties filename: C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Value oracle.install.customdeinstallcommand %ORACLE_HOME%/deinstall/deinstall

  INFO: Oracle.install.customizedeinstall set to true

  INFO: The value oracle.installer.ORACLE_BASEvar ORACLE_BASE

  INFO: The value oracle.installer.LibPerms 0755

  INFO: Value oracle.installer.summary_expand_nodes NewLangs, Global, space, Langs

  INFO: The value oracle.installer.LibExtns .sl,.sl.11.1, .so,.so.11.1,.sl.1.0,.so.1.0

  INFO: oracle.installer.mandatorySetup set to true

  INFO: oracle.installer.useORACLE_BASE set to true

  INFO: Oracle.installer.removeallfiles set to true

  INFO: Oracle.installer.additionaltool_continue_onerror set to true

  INFO:

  Specify Home Details Page *.

  INFO: Setting the property "OracleHome (ORACLE_HOME)' ' D:\Oracle\Middleware\EPMSystem11R1\... \dbclient32'." Has received the value of the command line.

  INFO: Setting the property ' OracleHomeName (ORACLE_HOME_NAME)' to 'OraClient11g32_sa-essbaseapp '. Has received the value of the command line.

  INFO: Definition of the 'OracleBase (ORACLE_BASE)' property ' D:\Oracle\Middleware\EPMSystem11R1\...------'. Has received the value of the command line.

  GRAVE: The Oracle Home name is not valid. Oracle Home names must be 128 characters or less and contain only alphanumeric characters and underscores.

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: User selected: Yes/OK

  INFO: Closing OUISetupDriver.JobExecutorThread

  GRAVE: [FATAL] [INS-10008] Session initialization failed

  CAUSE: An unexpected error occurred during initialization of the session.

  ACTION: Contact Oracle Support Services or view logs

  SUMMARY:

  - .

  See associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1096

  INFO: Tips are ABORT

  GRAVE: Unconditional exit

  INFO: Add ExitStatus FAILURE to exit status set

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 1

  NEWS: Stop Oracle Client install

  I got my answer in the newspaper.

  The ORACLE_HOME_NAME is the question.

  Our deployment account has a hyphen -, and so the Yes program is unable to initialize.

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• Undo system restore option is failed upwards in the system restore menu.

  Original title: Undo system restore?

  My sound doesn't work on my windows XPS, I did a system restore, but not to the point of restoration before the sounds stopped working because it didn't go that far back. but now, I want to cancel the system restore because it has messed up my computer, but undo system restore is not an option in the menu of system restore. What should I do?

  Hello

  1. were you running safe mode system restore?

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  I suggest you to refer the link below which will help you put the sound on your computer.

  No sound: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

  Hope this information is useful.