Restore task

Similar Questions

• Restore task manager

  I performed an antivirus scan and found several infected files. I removed the. Now when I try to run tasksmanager, only the first tab wrath on. The tabs for the process and performance are not. Is it possible to restore taks crib?

  I use windows xp.

  http://support.Microsoft.com/default.aspx?kbid=193050 - Task Manager tiny footprint Mode

  If this does not work, maybe your computer is not perfectly clean. Do not forget:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• POS 5.5 emergency restore: could not create restore task

  Trying to recover a computer virtual via VDP 5.5 emergency restore

  Dissociated ESXi of vcenter.  Can connect to ESXi by IP or DNS.  Selection of the data store with enough disk space.  With the help of a unique virtual machine name.

  From the inception of the restore job that I get:

  Failed to restore:

  Server could not create a task to restore at this time.

  As configuration changes may take a few minutes to take effect, please try again at a later date.

  Round hunting for the cause of this problem or what log file contains additional information on the problem.

  POS administration guide has poor documentation on what file journal relates that much about this new feature of emergency recovery.

  Also.  Is there a documentation on the available CLI commands to run on the device to find active and other tasks.

  Help would be appreciated.  Thank you!

  Hello

  Have you read it already? vSphere emergency of Direct-to-Host Data Protection recovery | VMware vSphere Blog - VMware Blogs

• The program window will not bar restore tasks

  I work for a school district where we all connections.  On one of my teachers computers, when it opens a certain program it automatically minimizes and will not restore a mode full-screen.  It does via a shortcut as well.  However, when I log in, it works fine.  Any ideas how to fix?

  Hi afmtsu,

  ·         Are what program you referring?

  ·         These computers are on a network?

  ·         If it works well before?

  Check to see if the following is useful.

  Method 1: You can uninstall and reinstall the program to check the issue.

  How to change or remove a program in Windows XP

  Method 2: Perform a system restore to the date when it was working fine.

  How to restore Windows XP to a previous state

• Media Player will not bar restore tasks

  My media player don't restore or optimize off the coast of the taskbar. He plays music or videos in a small box out of the taskbar, but will not restore on the screen of the monitor. I tried to run the exe to install in the folder program files & I get an error message that I can't run because it is an older version of wmp that one installed. Of course I would be grateful for any help or suggestion if anyone has any ideas. I have Windows Vista Premium 64 Hpme x. thank you.

  If it is too long, see if it works...
  Do a system restore.
  Choose a date where you did NOT have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

• Can not find the task in the Task Scheduler

  I created a fundamental task to connect to an ad - hoc network whenever I boot my laptop with Vista Home Premium 32-bit.  I don't want that to happen and I deleted the network tries to delete the task.  When I open the Task Scheduler, I don't see my task listed.  I made sure 'show hidden tasks '.  I know that the task runs as I continue to receive errors not being to find the ad hoc network.

  I created a new task of fundamental task, called 'test' starts just the calc program and it shows in the list of tasks.

  Any help?

  As others have found, if you change the name of your computer, scheduled tasks that have been associated with a specific user account (like the logon trigger, such as the credentials for the job and so forth) will no longer appear in the list of scheduled tasks. Scheduled tasks displays the message "an error has occurred for task xxxx. Error message: the specified account name is not valid. "The same thing happens if you delete a user account that is named in a scheduled task.
   
  The reason for the problem is that the computer name part of the account name (for example, "mycomputer\myaccount"), and so if a part of the name is not valid, the associated account is no longer recognized. Unfortunately, given that the scheduled tasks will not display the task entry broken, you cannot fix it directly.
   
  The tasks themselves are defined in XML files in plain text stored in \windows\system32\tasks. The files have the same name as their entries in scheduled tasks.
   
  If a task is not desired, you can simply delete the corresponding file from \windows\system32\tasks.
   
  If you want to restore a task, you must change the computer name and/or account name everywhere wherever he is in the job file. But, you can just edit the file in place to solve the problem. Scheduled task detects that the file has been modified externally and even once will not use or display.
   
  I managed to solve the problem by following these steps:

  1. Move the file to the task entry broken of the \windows\system32\tasks in another case. You want to move it, copy it not - file must be put out \windows\system32\tasks. You can do this by using Windows Explorer or move the command in a command prompt window.
  2. Using Notepad, open the file in its new location. Set the name of the computer or the name of the account as it happens and save the file. Repeat steps 1 and 2 for all other tasks of problem.
  3. Open scheduled tasks, or select the menu Action, refresh. It should be no error message now, given that the task of the problem has been removed.
  4. On the Action menu, use the import command to locate the edited file. This will restore the scheduled task.
  5. Test the restored task by opening and then run. Once everything works, you can remove older versions of the file task as you had moved it. Repeat steps 4 and 5 for any other task edited file.

• Dialog box of "file, view, move, etc." missing. Running Windows 7.

  How can I restore tasks Menu and Navigation bars. Running Windows 7.

  This has happened

  Each time Firefox opened

  I started the computer. Reset is not restore either.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; HPDTDF;. NET4.0C)

  Don't see the menu bar not (File, Edit, View, history, Favorites, tools, help)?
  Turn on/off the menu bar is a new feature in version 3.6.
  (~ ~ Red: Linux and OSX see ~ ~: what happened to the file, edit and view menus? )
  Windows Method 1. Press and hold the key and press the letters of the following in this exact order: V T M
  Windows method 2 Press and release the button. The Menu bar is displayed; then choose ~ ~ red: V ~ ~ iew > ~ ~ red: T ~ ~ oolbars and click on ~ ~ Red: M ~ ~ enu Bar.
  The menu bar should now be displayed permanently, unless you turn it off again using view > toolbars. Check = not displayed, NO check mark is not displayed.
  See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
  Navigation, bar toolbar bookmarks and other toolbars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
  To display the status bar, view, and then click status bar to place a check mark (display) or remove the check mark (not shown).
  Mode full screen
  http://KB.mozillazine.org/netbooks#Full_screen

  See also:
  Back and front toolbar buttons or others are missing
  Customize controls, buttons, and Firefox toolbars
  How to customize the toolbar

• How to stop the Magnifier program activation at startup

  original title: I want to delete a "program".

  Forgive me for the use of terms laymans.

  Today, I see that on a user account Magnifier is activated at startup (log - on). I don't know how to make this stop. I tried to do something and got a message saying "disable permissions that inherits. I have some research here and "done something" according to a help page for Windows XP. I probably did more harm than good.

  I would like to delete the program, but it is not listed in Add/REMOVE programs (or is to REMOVE/CHANGE).

  Should I just delete the user account and start over?

  In addition, it is a fact that Vista does not automatically like XP restore points don't? Under Vista you must manually perform a restore point? In other words, on the XP computer I go to system restore and try to fix this mess. On Vista, I have found that "system restore." I have found where it is said today to a restore point, can not choose 3 days ago... because I have no previous restore points. I so widows updates

  We just got this PC and I am trying to set up for the family.

  Thank you.

  Go to start / Control Panel / ease of Access / facilitate the expect to see / and uncheck the box to turn on the Magnifier.  If this resolves the problem in this account, go to start / search box and type msconfig.exe and enter and then double-click on the program icon that appears.  Go to the starup tab and see if something related to ease of access or your magnifying glass is included - if so, uncheck the box to prevent it from running at startup and that should fix the problem.  If you can't find any such program, go to the services tab and look for the same thing.  If you uncheck the box, so it does not start at startup and that should fix the problem.  Here is an article on how to disable the Vista Magnifier that should work in the world and for all accounts: http://www.vistax64.com/tutorials/125037-magnifier-turn-off.html.  I suspect that this will do the trick.

  If none of these options works, you can always consider the account as a corrupt user profile and fix it usinghttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  =============================================================================================================================

  Like XP, Vista DO restore points do auto - there just need to be told to do. http://www.Vistax64.com/tutorials/169523-system-restore-task-change-automatic-restore-point-schedule.html orhttp://www.howtogeek.com/howto/windows-vista/change-how-often-system-restore-creates-restore-points-in-windows-vista/ (this second one is a little easier to follow).

  To find the system restore, go to start / Control Panel / backup and Restore Center / and to the left are two options - one to do a system restore and the other to create a restore point or change the restore point settings.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cisco Nac 3310 to level 4.1.6 to 4.7.2

  Hello

  I need to upgrade the environment of the NAC 4.1.6 version 4.7.2 version.

  This is the scenario.

  2 CAM

  2 CASES

  the platform of 3310 in HA pairs.

  On Cisco's Web site, I found that it is possible through this upgrade to 4.7.2: 4.1.6--> 4.1.8--> 4.5.1--> 4.7.2. I think the direct 4.1.6--> 4.5.1 upgrade is possible. Can you confirm that?

  Well, I have a few questions about this upgrade.

  (1) if the operation fails, is there any restore task to do? Reinstall the CAM/CASES and restore the backup or what?

  (2) can you tell me the time for 4.1.8--> 4.5.1 upgrade?

  (3) the downtime for the upgrade 4.5.1--> 4.7.2?

  Thank you for the support!

  Leonardo,

  Do first CASs. Because they are in HA, the key is to keep one of the device to pair HA always offline. So first make elementary school. Turn it off, the secondary image. Which stops and provide primary upward. Once it has control of the ip address of service, then reassemble the secondary again.

  Ditto for the CAMs. Still one should be down in a pair when you do upgrades.

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• DR VMware - workaround

  Guy

  I have had a few clients that I need support, they are people in small businesses of 5 to 10, 1 Windows SBS server for sharing and printing/archiving. Simple life

  They cannot afford or didn't need hifi VM solutions but I was wondering if I could arrange a quick Dr for them based on VMware and simple solution.

  I have to convince as a proof of concept, well, is that it is all free.

  Here is the POC for my clients, please approve it if all good or change, would be appreciated.

  1. download the new box and install ESXi 3.5, configure and assign an IP address.

  2 install the client from Vmware converter standalone on one of the client computer and convert the area physical server in a virtual machine on the ESX host.

  3. turn off the physical box at the moment and everyone connect on the new virtual server, test every good and OK

  4 turn off the virtual machine and allow users to return to the physical box.

  5. use the same converter to export the virtual machine (vmx and vmdk files) of the ESX host on an external drive.

  6 remove the virtual machine from the ESX host and back in the importation of the external drive.

  7 turn off the physical box and let users connect to the virtual machine again.

  Bottom line: in case of crash of the server (physical box), we have an arrangement to import back the files vmx and vmdk USB host ESX in a few minutes drive, we can do every month to keep the most recent data as much possible.

  Thanks to the adv.

  Well, it would be better solution if you're virtualizing the SMB servers and this keep instead of P2V them and archive as you know the SMB on physical boxes will be out of sync with the backup/archived so where DR Baker, your backup SMB servers are not up to date in any case especially Exchange SQL, DC, etc. unless these pretty well static servers.  However, if you insist on always running in physics, I suggest to have a backup solution for all servers with System State and differential plan you your schedule accordingly.  P2V would be time consuming and does not synchronize.  But you can use P2V to keep one set of servers in VMDK and Archives in the future, simply load ESXi and running at least that you do not have to reconfigure the applications/OS at all.

  I would suggest to have servers running on ESX hosts and use local disks or free tools like Openfiler, FreeNAS, Starwind etc. and they works well enough for the small environment. You can use VCB or backup software to schedule backup and restore tasks whenever you want.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Untie users without revocation of access while keeping revoke them method

  Hi all
  
  I have users who were incorrectly linked to their resource account.
  
  For example, I have 2 IOM ID:
  1 7777, owned by chris
  2 7778, which belongs to frank
  
  On their resource account, he created the user ID based on their ID IOM
  1 chris: 7777
  2 frank: 7778
  
  The admin who created the accidentally typed resource ID:
  1 chris: 7778
  2 frank: 7777
  
  During reconciliation, Chris is now Frank account and vice versa.
  
  If the admin had to come in and fix the ID, IOM would connect users properly to the reconciliation.
  
  However, Chris and Frank would now be placed in service for both accounts. If one were to have ended, it would be terimnated the two accounts. (Please, correct me if this is a false assumption)
  
  My question is-
  Is there an other way (other than updating the status a revoke in the database and change your definition of process rules) to unlink that account using the IOM OOTB features?
  
  Any help is appreciated.
  
  Thank you
  S

  Your assumption is correct.

  Her I solved this problem in the past is to

  disconnect the system from the IOM
  temporarily map the trigger to remove on a task that autocompletes
  revoke the "faulty" resource
  restore task to revoke
  back up the system

  Another option is to spoil the "unique identifier" field on the form of process. If the IOM cannot find the object that he should remove it will obviously fail.

  None of these options is very clean and I hope someone else has a better suggestion.

  / Martin

• After you restore an image of my system drive, my tasks and events disappeared. Help!

  I've restored a backup image on my C: drive. Everything looks good except all my events and tasks have disappeared from the calendar!
  I understand that this data is included in my profile, but how do I get my events and tasks and put back them in the calendar? Are the import and export of functions expected to be used to provide backups of my events and tasks? Shouldn't they already appear in the calendar after the restoration of a system disk?

  After a lot of messing around, I think I solved this problem.

  The problem occurs because of an incompatibility between certain values in prefs.js vs values in the data table cal_events.

  I copied backup prefs.js (containing the 'calendar') related lines in the current prefs.js and now everything looks OK, I can see my tasks and events in the calendar.

  The lines looked like this:
  user_pref ("calendar.list.sortOrder", "75f0f98f-9fdf-4bca-9e48-656ff2e1457d 012fd0d9-bcf1-43b1-a98d-6b0117a3f779 511ca361-a646-4f94-880b-526a0a5cdba1");

  These long numbers must correspond to the values of the column. cal_id apparently if they do not match, they do not appear in the calendar.

  Mine does not, so I corrected the values in the prefs.js file and everything seems to go fine now.

  I still need to find the cause of the incompatibility, I think it was something in the way that I restored the disk then run MozBackup to restore my backup Thunderbird.

  Hope this helps others with this problem.

  Many thanks to Gnospen and Matt for their help!

• In older firefox if I stop firefox.exe to the Task Manager and start firefox it will restore all my open tabs, now it doesn't

  usually in the earlier version as 28, so I end the process "firefox.exe" task manager and run back the firefox, it will restore the tabs normally I opened (websites that I had until I stop the firefox.exe)
  But now that more recent versions, not give me this feature, restore session screen becomes white and I drop my open sessions.
  I have to use the history to restore the sessions that I lost,

  Please can someone take a look at this problem, it would be an interesting option to stop the firefox.exe in the Manager of tasks and able to restore all the sessions again

  I have attached a picture for your information

  Thank you
  regarding

  Unfortunately the image have no download, but there are built in the back of the inverter session. If these do not work correctly, we are happy to investigate.

  • The problems of Firefox in Mode safe

  However, there is an addon that helps with backups called session manager Session.

• I don't want the session to be restored after end of task

  From time to time when I come across a malicious website which prevents any action of navigation. If the simplest action is to use the end task on firefox.exe task manager. It works well, however, because firefox has been forced to leave he is trying to restore the tabs, I had open. Previous versions of firefox would give you the ability to restore or to stop trying to restore after a few force leaves. now firefox keeps trying to recover the previous tabs.

  How can I set firefox to ASK if I want to restore the previous session?

  You can set the integer pref browser.sessionstore.max_resumed_crashes to 0 on the subject: config page in order to get the about: sessionrestore page immediately with the first start after a collision has occurred or the Task Manager was used for the closing of Firefox.

  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes
  • http://KB.mozillazine.org/about:config

• restoration of the Task Manager Office

  I recently changed the settings in the Task Manager and closed iexplorer (?). Now all the icons on the desktop disappeared and I can't go to the start menu. How can I cancel my modification that was made and restore the office via the Task Manager? Or could you let me know how I can get start menu and so do a system restore?

  Open the Task Manager-> click New task-> Type

  Explorer.exe

  Click OK.

  If this post answers your question, click mark as answer .