Restore the laptop to default

Similar Questions

• I have restored the laptop to factory settings, the product key sticker is faded... While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  What should I do to make it work again?

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• I can't restore the laptop to factory settings

  Hi guys, I recently received a large number of viruses on my Toshiba laptop and I pretty much cant get on the desktop because of it, so I decided to repair my laptop via records, but when I get this day with him, it gives me this error message
  "the file nvrd32.sys is not found."

  I did a lot of research on googled around and haven't found a solution so im posting this thread.

  I have a Nvidia Quadro GFX card if that counts for anything.

  I have 2 drives labeled "Drivers" and "XP SP2". I get SP2 on the laptop and I still get the same message, can someone help out me?

  Don't know what's this file, it could be a virus trying to spread.

  When Windows is virus and the operating system is damaged, it will never be the same.

  So your best option would be to recover your data and run the recovery of your recovery disks to restore Windows back to its factory condition.

  If you need a good tool to scan of viruses and spyware, install Avira and Spybot. (plus they are free!)

• I need to restore the security permissions default to all files on drive c of a Windows XP workstation

  I changed some security permissions on all of the C: drive, which is my boot drive system on a network under Windows XP Pro SP3 (32 bit) desktop.  I had shared the drive several years ago, and I believe that the problems were built from the other. I had to rebuild my server and choose a different domain name and connected workstations to the domain. I would like to restore default settings for the C: drive of the workstation (not shared?, permissions and security on all files of Windows and the default user restored to the default values.)

  Anyone know where I can find a list of the rights and permissions for each of the folders and subfolders on the WIndows system drive? Or is there an automated routine that will restore the default permission?

  Hi ArtMinds,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forums Pro Windows XP IT on Technet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Is it possible to restore the settings to default authorization/owner?

  is there a way to restore the registry key by default authorization/owner settings? > properties > Security > I tried to go back and not back to the original, but no, no chance.  therefore now not able to: connect to the internet. "Remove all and reinstall windows; restoration; updating the system and most likely.  Do not know what is the best solution... :-(

  Windows 8

  ENJOY IT!

  Original title: restore owner + permission changes to the registry

  Hello

  You could try doing a right click on your COMPUTER C:\ drive and selecting the SECURITY tab.

  Click ADVANCED in the bottom and take ownership of the whole partition\drive with ALL the permissions...

  Are you the owner... It will not go back to the default of origin, but hopefully everything should work

• How DO you restore the laptop computer screen under windows vista image

  Now, the picture on my acer laptop screen is totally black. Before that, I had my external monitor plug into laptop via mirror image and both monitors worked to find. My OS is Windows Vista Home premium. Help!

  Just a thought... it can be interesting to try to start safe mode
  and do a system restore to an hour before the start of this issue.

  * Proceed at your own risk *.

  See the following links:

  Windows Vista - start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Windows Vista - tools of diagnosis to use in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/diagnostic-tools-to-use-in-safe-mode

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• I installed seven 2.0.2 appearance but Firefox Add-on restores the value by default whenever I close.

  I installed seven 2.0.2 as an add-on to the appearance, but Firefox keeps returning to 11 Firefox by default whenever it closes. Is there a way around this?

  I have watched all of the items above and decided that I had no desire to create a new profile. I simply removed the add-on of the appearance of seven 2.0.2 and the problem seems to have disappeared. (Touch wood!)

• T 61 - hard drive problem after the attempt to restore the laptop to the situation of ex-factory

  
  

  Just to add, is that you use disks of lenovo? I also missed the opportunity to format the hard drive to install one or two times in the past, this was due to windows try to fix and not install clean windows acknowledged there was already an operating system installed on the hard drive and so the installation went into the repair track instead of clean install. You must boot from the CD drive. NOT a partial start of the hard drive then install CD, it won't work.

• I can't restore the default set of buttons on the message pane when I try to customize.

  I use Thunderbird 24.4.0 Lion mountain on a MacBook. I have three e-mail accounts - about to drop one having switched provider. Each account has different message pane buttons, not by intention, none has the complete set and could not restore all by doing a right-click to customize and selecting 'restore the game by default'.
  Thank you. Tanya

  Has followed this idea me and disabled the Gmail add-on buttons and have now all the buttons back. Thank you for pointing me in the right direction.

• M100 satellite disk restore will not work, keeps on rebooting the laptop

  Hello

  I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues.

  Now, I tried to run the program of restoration of the drive and it happens with ramdisk boot, then the f6 press to install an aditional drivers, then wait.
  The mouse cursor appears on the screen and it can be moved around, then the laptop restarts just.

  I tried this several times and with main power and with and without the battery while on the grid.

  I suspected it was a problem of hard disk or a boot sector virus, which prevents the program of restoration of the race. However, I tried a new hard drive and it still does the same thing.
  I changed the RAM and still does not. About a year or two ago I had to restore the laptop as the HARD drive died and I replaced it with another hard drive on a different Toshiba laptop and it worked fine.

  Any help would be greatly appreciated as I need this laptop for school

  Thank you

  Hello

  Sorry, but one thing in this story is strange. Why load additional driver?

  If you want to have out of the box to install OS, you must use the Toshiba CD/DVD facilities sent. Using this disk, you do not need to load anything, just start the recovery procedure, let it run and when you're done just restart your laptop. That all s that you do.

  So, if you have this original Toshiba drive please do as follow:
  Start your laptop and press F12 repeatedly
  When the boot menu appears recovery disc into the optical disc drive
  In the list, choose the CD/DVD device and press ENTER
  Follow the menu on the screen

• How to restore the Satellite has to factory settings

  Hello

  I was wondering if there was an option on your computer to restore everything you the factory settings.

  Also I was wondering what did do the thing of recovery Toshiba?
  He he restores the values by default or...?

  How to get to the application recover Toshiba? Is to restart the computer, press "F8".
  Press enter on computer reapair?

  Then there is an option to use it and a big notice in big red letters appears

  pls help!

  > I was wondering if there was an option on your computer to restore everything you the factory settings.
  It is possible using the Toshiba HDD recovery option

  > Also I was wondering what is the Toshiba Recovery thing.
  It redefines the laptop to factory settings ;)

  > How to get to the application recover Toshiba?
  You have already described. Press F8, choose repair my computer and choose the last option called Toshiba Recovery. ;)

• HP ENVY 17-j020us Quad Edition: installed SSD and Windows 7, now the laptop will not boot

  I replaced my hard drive Windows 8.1 with a PNY 240 GB SSD and Windows 7 64-bit.  Everything worked very well! Installed all the drivers, everything has worked very well!  Restarted several times, everything worked fine!  Portable stop for the night, the next morning I turn on the laptop and get this error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I've traveled different repair procedures using the ERD Windows 7 without change.  I have reinstalled Windows 7 with SSD formatted as GPT drive, received the same error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I have reinstalled Windows 7 SSD formatted as MBR disk withs, received the same error message:

  "not found boot device, please, install an operating system on your hard disk, hard disk 3F0".

  I removed the SSD to the laptop and placed in a desktop pc, pc works fine, no problem with the SSD.  SSD in laptop, got the same error message: "boot device not found, please install an operating system on your hard disk, hard disk 3F0".   I don't know where to go from here.

  Help please...

  Okay, I'm running.  In the System Configuration UEFI clicked 'Load HP Factory Default keys', this restored "Secure Boot" who has restored the laptop as long as you work!  Thanks for the help.

• Re: Satellite A300 - how to restore the original condition?

  Hello

  My computer freezes for a second or 2 from time to time and Toshiba support told me it might be a software problem. I don't think, because he began the day I bought the laptop and the display driver keeps on the work stoppage, but because I said that if it's a software problem.
  I would have to pay for it, I want to try everything before sending it for repair. This is why I would like to restore my Satellite in its original state as he was just at the moment where I bought it.

  So basically I have 2 questions:

  1 - does anyone have any idea why it keeps freezing on me? And what I should try to do to fix it?
  2. can someone tell me how to restore the laptop to its original state?

  Thank you very much Dina

  Hello

  To determine if it of a software problem or not, you need to restore the factory setting and if it doesn't work you can go to an authorized service provider. They can repair the laptop for you.

  The factory settings can be restored with the Toshiba recovery disc. I guess that your laptop has been delivered with Windows Vista, if you have options to restore factory settings: the Toshiba disk recovery or HARD drive recovery service.

  HARD drive recovery function formats the first partition of your laptop and install Vista again with all the drivers and tools of Toshiba. It is an image that is stored on the second partition of HARD drive in the folder HDDRecovery.
  If you go into the advanced with F8 boot menu after you start the computer, you can start this feature of Toshiba. And then select Repair my computer and some Windows files will be loaded. Then, you can choose the function to drive HARD Toshiba Recovery and follow the instructions on the screen.

  The Toshiba Recovery disk, you must create first, or have you done this yet? Normally, you get a reminder of recovery message after the first start of the laptop that you must burn this disc. Therefore, you must the preinstalled Toshiba recovery disc creator and the image in the folder in HARD drive recovery will be burned on the disc. Then you have a startup disk that can restore the factory settings and HARD whole disc formats then back up your data first!
  The recovery disk is necessary if you have a new HDD or Windows start doesn t. Otherwise, you can use HARD drive recovery.

  I hope I could help a bit and now you understand how to restore the factory settings.
  If you have any other questions, please let us know! :)

  Good bye

• I would like to know how to re - install windows on a laptop with the product key on the back of the laptop.

  install windows with the product key

  someone I gifted an old laptop with a lot of things about what I don't want and stuff I want is missing. I would like to know how to re - install windows on the laptop with the product key on the back of my laptop.

  or, even better, if someone could find me a way to get a disk to restore to factory without purchasing information, which would be awsome.

  I thank you for your time and have a good day.

  If the laptop is one of the well known brands, he may well have a restore partition.  If you do not have a manual to the user of this computer, then go to the manufacturers website and look for the documentation.  At the very least, you should be able to find information about how to restore the laptop from the recovery partition.

  If the restore partition has been decimated, the manufacturer may still have available for a nominal cost of installation diskettes.

• Restore the backup from the clouds

  Salvation;

  I'm using MS cloud for backup of my laptop with Windows 7.

  I had a crash of HW so I had to restore the laptop with the original SW containing no cloud backup.

  How can I ge the hand on my backup data in the cloud of MS and download it?

  [moved German forums]

  Hello Lervik,

  Thanks for posting your question on the Microsoft community.

  I need additional information about the problem so that we can help you better.

  1. is your computer connected to a domain network?
  2 are you referring to Microsoft Azure or OneDrive when you say "MS cloud"?

  Thank you for details on the issue.

  I suggest to check the following items and check.
  Reference:
  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows/restore-files-backup#1TC=Windows-7

  https://azure.Microsoft.com/en-us/services/backup/

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you