Restore Toshiba R100 discs - windows start cycles

Similar Questions

• I have a Toshiba NB505 with Windows Starter. What can pass too?

  can what operating system I put too? Can I free?

  You can update your Windows 7 Starter to Windows 7 Home Premium, Professional and Ultimate, and the upgrade is not free.

  Check this link http://windows.microsoft.com/en-US/windows/shop/windows-anytime-upgrade.

  Windows Anytime Upgrade FAQ

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

• Question of TOSHIBA Recovery Disc Creator - Windows cannot find ToRDC.exe

  TOSHIBA Recovery Disc Creator went a little wacky.

  When I select TOSHIBA Recovery Disc Creator in menu start all the getting is

  "Windows cannot find 'C:\Program Files\TOSHIBA\TOSHIBA Recovery Disc Creator\ ToRDC.exe', make sure you typed the name correctly, and then try again."

  He could be overzealous to me right click or delete. I don't right click Delete the windows folder more (he he he) honest joke.

  Anyway, any help really appreciated.
  Thanks in advance

  PS: I forgot to add that I do not have the recovery disk, should have as I bought the new laptop from argos...

  Hello

  Check if the ToRDC.exe can be found in the folder C:\Program Toshiba Toshiba Recovery Disc Creator.

  It seems that the exe file cannot be run.
  If it of not available, then you cannot start this application.

  Unfortunately, it of not possible to download Toshiba recovery disc creator.

• Cannot start Toshiba Recovery Disc Creator on my Satellite A300 - 15K

  Hello! I'm of the Poland if my English is a bit poor... (but I hope that's enough)

  My problem:

  I don't have a recovery (DVD) drive because I use earlier Recobery of Toshiba Disc Creator (when everything in my laptop was good).

  Now, I didn't make this record because when I run Toshiba Recovery disc Creator I have an error:

  "EWC program launch and create for DRC Recovery partition _przestaa INI files? Dziaa? ndmam§a? (has stopped working) _

  Error details:
  Zdarzenia problemu name: APPCRASH
  Name aplikacji: TRORDCLauncher.exe
  Wersja aplikacji: 1.0.0.1
  Aplikacji czasowa Sygnatura: 4682674e
  Name Modua? u z Ba? ? Dem: WIMGAPI. DLL
  Wersja Modua? u z Ba? ? Dem: 6.0.6001.18000
  Sygnatura czasowa Modua? u z Ba? ? Dem: 4791a7a6
  Kod Wyja? tku: c0000135
  Przesunia? Wyja cie? tku: 00009cac
  Wersja systemu operacyjnego: 6.0.6001.2.1.0.768.3
  Identyfikator Ustawiea? z: 1045
  Information 3.Dodatkowe 1: 9 day 13
  3.dodatkowe information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
  3.dodatkowe information 3: 9 day 13
  3.dodatkowe information 4: 1abee00edb3fc1158f9ad6f44f0f6be8

  Read our przypadku PBN Poufnoa? This informacji:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0415

  "

  Hello

  Have you changed anything on your laptop?
  I mean if your HARD drive recovery partition has been changed or the data partition thin o has been removed?

  To be honest, for me, it looks like the issue of the BONE. I think that it s not a question of simple tool, but I think that the operating system was confused

  Maybe you should try to recover the laptop using Toshiba HDD recovery and after the new installation of operating system on your laptop, you can try to create the recovery disk again.

  To start the recovery, you must press the F8 key immediately after the laptop has been powered. Then, you choose the first option called fix my computer.
  This would lead to a new window and there, you could choose Toshiba HDD recovery.

  But note; This recovery would format the whole HARD drive then perhaps you need to back up data before you start this procedure.

• Cannot start my TOSHIBA Recovery Disc Creator

  I have laptop Satellite A300-148
  Since I bought I tried to create a recovery disk to format my laptop, but every time I try to open 'TOSHIBA Recovery Disc Creator' this message appears on my face:
  ERROR: "(5) to C:\Program Toshiba Toshiba Recovery Disc Creator\Setenv.ini were denied access."
  What should I do?

  Hello

  I don't know what the problem is here, but the only thing you can try is to install the operating system with recovery image in the hope after the new installation of OS, that this tool will not work correctly.

  The recovery image is recorded on the second partition of HARD drive and to start the recovery installation press F8 after starting your laptop. In advanced startup options, select the first option to fix my computer. When the system recovery options are shown, please choose the last option in recovery Toshiba. After doing this just follow the on-screen menu.

  When the operating system is installed, try using Toshiba Recovery Disc Creator. I recommend you use high quality DVD-R media.

• After upgrade to Windows 7 can I use Toshiba recovery disc creator?

  Hello

  I just upgraded my Toshiba Satellite L550-130 from Vista to Windows 7. The Toshiba recovery disc creator, which is always installed also works for Windows 7?
  Then, I'll go and buy some blank DVDs...

  Thank you and grettings,
  Toni

  Hey mate,

  I doubt it will work. I mean, after the installation of Windows 7, there is not image files that you can burn on the recovery disk. So it does not work in my opinon.

  If n t believe you, just try and post your results here! Blank DVD is really cheap ;)

• I just bought a PC C50 toshiba laptop with windows 10. I would like to ask if someone can tell me if it is easy to remove the Windows OS 10 and restart the laptop with my windows disc 7.

  * Original title: delete windows 10

  Hi, I just bought a PC C50 toshiba laptop with windows 10. Is not not a geek, I would like to ask if someone can tell me

  If it is easy to remove 10 OS and restarting the laptop with my windows disc windows 7, the reason why I want to do is

  because I have aready have a desk top running 7, but it is to the top at the moment and could use the laptop backup

  You must ask your win-10 computer make this question

  They would have made drivers for this machine for win - 7

  If not then no.

  Your only option is to return it and ask for a unit that has win 7 drivers.

• Restore pirate ultimate from windows 7 to windows 7 starter edition

  Hello guys,.

  I have problems with my laptop recently. I hope someone can help me to solve it.

  I got windows 7 starter original once I bought my laptop and updated computer upgraded to windows 10. My laptop has been repaired and the store said it is better to use windows 7 because windows 10 is heavy for my laptop and so I Yes.

  What bothers me is that the shop has changed my windows windows 7 ultimate and it is PIRATE!

  I didn't know the store actually change to windows 7 ultimate PIRATE!

  So, is it possible for me to recover my windows starter 7 original? It's a bit annoying to use the pirate version >.

  Furthermore, I use Dell laptop.

  Thank you very much.

  You can perform a destructive factory restore, using the hidden disk partition. Consult the manufacturer's web page for instructions on how to start the process.

• When you try to install windows 7 64 bit, he asked me to remove the disc and start over, but it does not help. Help, please.

  So I have a 32-bit windows system 7 and I'm trying to upgrade to a windows 7 64-bit system.

  I have an installation disc, and my pc should be able to handle 64-bit.

  However, when I insert the disc (yes my drive is started first in the BIOS)

  The installation program starts,

  I have chosen the language,

  Accept the terms and choose to upgrade.

  He then gives a compatibility report:

  "the computer has started using the windows installation disc remove the installation disc and restart your computer so that windows starts normally.

  When I restart my pc while the disc nothing happens and when I restart my pc with the drive the process repeats.

  I'm looking for for a long time on the internet and I can't find all the solutions that work for me.

  Please give detailed answers, all help its appreciated.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  After the first reboot, set the BIOS to boot from the hard drive.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Satellite A300: TRDC reminder & Toshiba Recovery Disc Creator works after upgrade to Windows 7?

  Hello

  I'm sorry for the bad English.
  Satellite A300.
  Has performed the update to Win7 upgrade Toshiba program.

  This program works;
  TRDC reminder and Toshiba Recovery Disc Creator after update to Wins7?

  The TRDCReminder program found no "revival of the computer.
  Toshiba Recovery Disc Creator program was created and incomprehensible?

  If what these program how to recover your computer in case of failure?
  TEMPRO works in Win7?

  Thank you very much.
  With greetings.

  Igor.

  Hello Igor

  In my opinion, you must create recovery disk before upgrade you to Win7. I did the same thing.
  Later, if something goes wrong, you can use your disks and install Vista using the created recovery disks.

  I don't understand why you want to wait and create these disks after upgrade. This recovery creator disc doesn t create recovery image in the current state, but always the same recovery image, you got with your laptop.

  TEMPRO should work in Win7 too.

• (Redirected) Alienware Aurora R4 will not start windows, stuck in the endless start cycle

  I go give the situation leading to this problem in aid of casemit t.

  My computer started to slow down a lot, the computer crashed quite often in 2 different ways 1 the computer could hang with a message from windows saying that my computer ran into problems the second way, it would be a black screen saying no internal hard drive, also found if I leave my computer on for a while it would end in the 2nd type of accident or when I tried to come back and give the signal to pc can he would not return.

  After a few days when I started the computer windows started normally but it was extremely slow nothing loaded quickly a process that was normally a few minutes became hours.

  Then, I started in safe mode to reset my computer bug each time said he couldn't finish.

  Now when I turn on my pc I get the boot of alienware repeat infinitely, it beeps power up then a little later my devices will down and the lights on the pc and it will start again.

  I can't access the start menu when presiding f12,

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Satellite L650 - 12K - restore the factory with Windows password settings?

  Hello

  Today I received my new Toshiba Satellite L650 - 12K. I went through the process of "first use" and put in place my name of user and password Windows 7 etc.

  However, after a reboot, when I tried to enter my password to connect to Windows, it says it is incorrect. I tried different combinations of password I used (I know what it's like I wrote it down at the time)-ive tried caps, plugs etc but nothing works.

  If I order the Toshiba recovery disks I will be able to return the laptop to factory settings and start the installation again, including Windows?.

  PS - I only put an account so can't even connect you as another user.

  Thanks for your time and your help.

  Gary2802.

  Hey Buddy,

  Yes, the Toshiba recovery disc can restore the initial configuration (on the box settings) even you don t know the password because it will remove the whole HARD disk and restore the version preinstalled Windows from Toshiba.

  So don t you worry about this, Toshiba Recovery disk will help you! ;)

• Freeze on startup. New installation takes 3 tries before windows starts:)

  I installed a new copy of Vista ultimate on my laptop (Toshiba Qosmio) now every time I have reboot or turn off and then back again I have to press the power on button 3 times. I get a black screen and there I turn it off and do it again same thing and then the third time, it turns black for a second and then windows starts. Everything is up-to-date, and I am sure that this is not a virus please help...

  Hello

  What you are experiencing is an intermittent BlackScreen so here how to solve the problems that is they
  become more persistent but I hope that the foregoing will eliminate the.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How to restore factory settings when Windows does not load?

  I'm recovering from the laptop (Dell Inspiron N5010) friend who has been infected with a malware ransom (ICE Cyber Crime Center Backdoor.Win32.ZAccess.erds). I used the Kapersky rescue disc to remove the virus from the ransom but now Windows will not load and I suspect that the MBR has been affected.  At startup, the Dell logo appears and the window loading appears briefly, but then you have the 'blue screen of death' flashes and the cycle repeats.   The bsod error is:

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO AVOID DAMAGE

  ON YOUR COMPUTER

  IF THIS THE FIRST TIME YOU ' VE SEEN THIS STOP ERROR SCREE.

  RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN, FOLLOW

  THE FOLLOWING STEPS:

  CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED

  HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK THE HARD DRIVE

  TO MAKE SURE THAT IT IS CORRECTLY CONFIGURED AND COMPLETED.

  RUN CHKDISK /F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART YOUR COMPUTER.

  TECHNICAL INFORMATION

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  The F2 and F12 keys work, but the F8 key will not open the "Advanced Boot Options", so I can't to the "Restore Dell DataSafe and emergency Backup" or any other advanced option.  System Restore will not work either.

  I ran chkdsk and sfc hard disk (via the Kapersky Rescue disk) and neither solved the problem.  Then I copied its data on the hard drive.

  I would like to restore the laptop to factory settings (assuming that it would be better to reinstall Windows because the drivers Dell would be included already?).   There is a folder on the hard disk called "emergency" and contains a Backup*.exe file and several Backup*.dsb files.

  Is given this scenario, possible to restore to factory settings?  Or am I forced to reinstall Windows from scratch?

  What version of Windows?

  7b error message indicates the operation SATA (SATA Mode) setting got changed in the BIOS Setup or possibly the hard drive may be roasted.

  Restart, and then press F2 before Windows starts to load to open the BIOS Setup. Look for the option SATA or SATA Mode operation (models name it differently).  I don't see the BIOS screen options in the online manual, but the options for this parameter can be: RAID, AHCI or RAID Autodetect / ATA. Post back and we say exactly what options are available and how she got now.

  If you are in the BIOS Setup, also find the Boot Sequence option and make sure that the internal hard drive is ranked first on the list. If it is not first, move it to all first, save the changes and exit the installation program. See if it boots now.

  If you reinstall Windows by using a Windows Dell reinstall drive, you should not ask for the product key. It should install automatically by itself. HOWEVER, you will need to have the product keys for all the other apps that you want on this system, for example Microsoft Office, so make sure that you have the product keys and the floppies to install before you clean the hard drive.

• Optical USB mouse problem with Portege R100 on windows XP

  We have three laptops Toshiba Portege R100 currently giving problems with mouse optical usb from Toshiba.

  When starting the laptop, that the mouse is not recognized by windows. Before and after will be identified in the mouse will not respond while Burns led.

  The mouse will be recognized after re - plug in the USB port.

  We have updated versions of bios to the latest version. (1.4)

  Another mouse (USB optical) works OK without problem.

  We have removed the drivers and reinstalled by windows plug-and-play process, but it does not work.

  Is this a known issue?

  Thanks in advance

  Hello
  would it be possible that the USB mouse has high power consumption?

  As far as I know, there are a load of maximum intensity for each USB Port.

  Do you know how much power (intensity) needs to this mouse?

  Good bye