RMAN retention policy does not log source archive

Similar Questions

• Retention policy does not work

  Hello
  
  I have 2 node RAC 10 g 2 db. Operating system is 5.8 RHEL. I'm with RMAN for full backups every night. The problem is the old backups not automatically deleted through the retention policy, which is 7 days. For example, now, I have at least one backup set that is about 1 month. Here is a part of the log RMAN:
  
  delete noprompt obsolete device type disk;
  RMAN retention policy apply to the order
  channel ORA_MAINT_DISK_1: sid = 4327 instance = MYYRAC1 devtype = DISK
  allocated channel: ORA_MAINT_DISK_1
  output channel: ORA_DISK_1
  RMAN retention policy is set to 7 days recovery window
  not found obsolete backups
  output channel;
  
  Thus, the final problem which is the disc will sooner or later totally old full backups.

  Hello;

  Obsolete backups can be complex. Watch the incremental backups that extend the retention period. This simple command can help:

  RMAN > OBSOLETE REPORT.

  Otherwise, I have this note:

  http://www.Visi.com/~mseberg/RMAN/obsolete_backups.html

  If the catalog has no problem and retention policy is set, it almost always works:

  RMAN > DELETE noprompt obsolete;

  More information

  http://www.Visi.com/~mseberg/RMAN/backup_redundancy.html

  http://www.Visi.com/~mseberg/RMAN/recovery_window.html

  Best regards

  mseberg

• Query on the RMAN retention policy

  
  Hi, I have my retention set to 2 redundancy policy

  I took 3 backups so far (2 sets of backup, 1 copy of the Image)

  When I check the obsolete report I get the following

  RMAN retention policy apply to the order

  RMAN retention policy is set to 2 redundancy

  Report of obsolete backups and copies

  Making key time filename/handle type

  -------------------- ------ ------------------ --------------------

  Backup 1 05-SEP-13 set

  Exhibit 1 backup /home/app/oracle/fast_recovery_area/PRIMARYP/backupset/2013_09_05/o1_mf_annnn_TAG20130905T100934_92jllgn1_.bkp 13-SEP-05

  Backup 2 05-SEPT-13 set

  Exhibit 2 backup /home/app/oracle/fast_recovery_area/PRIMARYP/backupset/2013_09_05/o1_mf_nnndf_TAG20130905T100949_92jllycp_.bkp 13-SEP-05

  Backup 3 05-SEPT-13 set

  Save the song 3 /home/app/oracle/fast_recovery_area/PRIMARYP/backupset/2013_09_05/o1_mf_ncsnf_TAG20130905T100949_92jln4d5_.bkp 13-SEP-05

  Backup 4 05-SEPT-13 set

  Save the 4-13-SEVEN piece. 05 /home/app/oracle/fast_recovery_area/PRIMARYP/backupset/2013_09_05/o1_mf_annnn_TAG20130905T101030_92jln6cx_.bkp

  Backup 5 27-SEPT-13 set

  Save the song 5-/home/app/oracle/fast_recovery_area/PRIMARYP/backupset/2013_09_27/o1_mf_annnn_TAG20130927T120734_94bsqrj6_.bkp 13-SEP-27

  Backup the value 7 13-SEP-27

  Save the song 7 /home/app/oracle/fast_recovery_area/PRIMARYP/backupset/2013_09_27/o1_mf_ncsnf_TAG20130927T120751_94bssf0j_.bkp 27-SEP-13

  Archive newspaper 305 10 October 13 /home/app/oracle/fast_recovery_area/PRIMARYP/archivelog/2013_10_10/o1_mf_1_138_95dv9okt_.arc

  Archive newspaper 306 10 October 13 /home/app/oracle/fast_recovery_area/PRIMARYP/archivelog/2013_10_10/o1_mf_1_139_95dv9px0_.arc

  Archive journal 307 10 October 13 /home/app/oracle/fast_recovery_area/PRIMARYP/archivelog/2013_10_10/o1_mf_1_140_95dv9r8f_.arc

  Archive newspaper 308 10 October 13 /home/app/oracle/fast_recovery_area/PRIMARYP/archivelog/2013_10_10/o1_mf_1_141_95dv9sk9_.arc

  Backup 1,2,3,4 set elements are essentially equivalent to my older backup - so under a redundancy of the 2, I can see why it is obsolete

  5 and 7 were simply command file/SPFILE AutoSave backups and the 2 most recent backups of them have since been taken (backupset parts 9 and 10)

  Q. what happens if I wanted to restore the database to the 27/09? What control and SPFILE he would use (assuming that OBSOLETE files had been removed from the FRA)?

  If I have to restore the backup set removed in the FRA, Cross Check and restore the database using RMAN to 27/09?

  Q. Why are some today (10/10/13) archival newspapers marked OBSOLETE?

  Q. If I wanted to be able to restore the database for 2 days, is perhaps a policy of conservation of a day 2 Recovery window might be better than my current redundancy = 2 policy (associated with a daily backup)?

  any advice appreciated,

  Jim

  Yes, the BackupPieces names.

  A BACKUP of the LIST would show the content of BackupSets and BackupPieces.

  Hemant K Collette

• The Customer Service of group policy does not logon, access is denied.

  I tried to reboot in safe mode, but it does not log it. There is no secondary logon to use. The only record of restore point was forward who has not at the problem of the evening. Where can I go from here?

  Disable hide hidden files and Hide protected operating system files

  Open my computer

  Press ALT + T

  Click options, and then view the folder

  Click on show hidden files folders and drives

  Uncheck the Hide protected files BONES

  Then use the volume shadow copy service store to restore a previous backup of the ntuser *. * file

  To make this opening users profile folder in c:\users\

  Right-click on the name of the profile

  in the tabs list, click Previous Versions

  Choose the second most recent snapshot and click Open

  Copy all the ntuser files and paste them to the user profile folder c:\users\[profilename]

  replace all and restart

  Log in as the user

• With RMAN for backup, but not with the archive logs

  We run a 10.2.0.4 database and the rest 11.2.0.3. All databases are on RHEL 5.7.
  
  Our backups are via RMAN, with the data files, controlfiles and spfile saved to disk, then each day, it is copied off site to a backup server.
  
  My question is around logs archiving and RMAN.
  Our current situation is:
  -We do not save the logs to archive via RMAN. for example: backup of the list of the archivelog all; gives "specification does not match backups in the repository.
  -We set the archive_lag_target so archiving logs is produced every 30 minutes.
  -a cron job running on a remote server runs periodically to synchronize data (rsync server) the directory of archives with a remote control.
  -daily archive logs on the server host are bzip. Purge of these newspapers is scheduled for more than 3 days rman 'window of recovery '.
  
  I'm interested in feedback as to if our strategy around archiving logs is correct or not.
  
  Should we be backup logs archiving via RMAN? Are there potential problems with our approach?
  We just kept our backups in this way the DBA in the past want to see newspapers archived as opposed to it while a backupset.
  
  Curious to know what others are doing.

  Hello

  Welcome to OTN!

  Archivelogs with RMAN backup is a better option. When the archives are supported by RMAN, RMAN would be aware of the backup items which are required at the time of the recovery archives. You don't have to do it manually.

  On the disk space, you can delete the archives once they were saved by RMAN.

  RMAN > delete any backup archivelog entry;

  This supports the archivelogs and then remove the archives from the disk.

  If you have a dataguard configured, you can set the deletion policy 'applied on Eve', which removes the archives as and when they are applied to the database ensures there by the management of disk space again.

  RMAN > configure archivelog political of deletion to applied pending;

• Real-time application does not work; source code works very well

  The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.

  I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.

  After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.

  I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.

  If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.

  The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.

  Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.

  Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.

  
  

• Domain group policy does not work on a station

  Hello

  Been the last week reading everything that is available on the internet.

  Win 2008 R2 Standard

  Group Policy created and linked to an OU - ministere1

  in the AD, the container has users in it that the policy should apply to.

  everything works fine on PC1 for User1

  everything works fine on PC1 for User2

  does not work on PC2 or for User1 or 2

  RPC is enabled

  Domain controller - use the default

  gpupdate/force - shows update is successful

  Gpresult /R shows the groups appropriate for user 1 and 2 but can be applied strategy local politics

  is there something I need to turn it on to use the distributed domain GPO?

  BTW.

  politics is Frank - maps a network as a reader folder (checked the privileges and as said before - this works fine on PC1 but not on PC2)

  Both PC's are Win 7 64 bit Pro

  When you try to test the strategy side server it shows RPC server not available

  RSoP will also show access denied on PC2

  If you have any solution for this problem - please help

  In this case, Peter

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to get our app on a BES client (policy does not allow downloading applications)

  Hello.

  I'm in a bit of a link here.

  We launched our application in November of last year. It is available on App World and our customers were downloading it very well so far.

  One of our customers sent us a few days ago an email asking how they could 'push' our application to their employees through their Blackberry Enterprise Server. I've never worked with before BES and had no idea what they were talking about.

  I asked them if their blocked policy used to download apps from App World and unfortunately they said yes.

  Now, during our beta-test phase, I had our testers download from our server by linking to our .jad file. Could this be the same design for better?

  How the client business "grow" our application to their employees? Do I have to send them our COD files?

  Any help would be greatly appreciated.

  Thank you

  Hello!

  There are a few options that the company might use:

  (1) to grow in fact the customer request would need the COD and ALX files (note, not brother COD files [ending-# .cod] but together main COD files). They can index the latter on their BES and push them to a subset of employees.

  (2) if the company uses BES 5.0.3 then they can actually afford to App World and only allow certain applications to be accessible. This may be a better approach, because it does not require the developer to provide the COD and ALX files, will the upgrade path normal app and will be much easier to maintain for both parties.

  See you soon,.

• Harvest access policy does not

  Hello

  I'm accommodating a target system LDAP connected to IOM 11 GR 2 PS2 and I would like to use the political feature of harvest. I reconciled an account and it's target (rights) system roles in IOM and I waited this work to "Evaluate the user policies" would be given a role of IOM corresponding to the user (based on the system of law and the target defined in the access policy). But it doesn't work--not even after setting manual USER_PROVISIONING_ATTRS explicit. POLICY_EVAL_NEEDED = 1 (in the comic book) - after the work performed to the value of POLICY_EVAL_NEEDED is 0, but there is no association between the user account and the corresponding IOM role (I expect that this is the result of the harvest of the access policy).

  My setup - I set the cfg attributes XL system. AllowAPHarvesting, XL. AllowAPBasedMultipleAccountProvisioning to access TRUE, corresponding policy must be harvested system target filled in and also the corresponding payment is defined in the policy. Retro indicator is on. I did not set the discriminator to account for the target system because there is max one account per user in the target system LDAP.

  Can you help me identify the reason why the harvest is not working?

  Peter

  Hello

  Evaluate user policies does not associate a role of IOM with the user.

  The following post associate old user role:

  http://docs.Oracle.com/CD/E40329_01/admin.1112/e27149/Scheduler.htm#OMADM738

  Refresh the role memberships

  It assesses the role memberships and assigns users to roles based on rules. This work evaluates all the roles which the composition rules have changed since the last work performed and their immediate assessment have not been chosen by the administrator.

  None

  Yes

  ~ J

• RMAN retention policy

  Hello everyone, I think to create a retention policy, but the problem is if I want to have the backup that ran daily from detention for 15 days and each backup run a monthly backup for a year which is the best option to set up the recovery window retention policy, because if I set with 365 days I'm going to keep daily backups for the whole year, suggest or advise

  Hello

  set the retention policy for 15 days (daily policy):

  RMAN > CONFIGURE RETENTION POLICY to RECOVERY WINDOW OF 60 DAYS;

  And add keep until 'sysdate + 365' monthly backup.

  RMAN > backup format incremental level 0 '% d.n0.%T.set_%s_%t' TAG data = 'BK_DATA_monthly_20150501' keep until 'SYSDATE + 365' opens a session;

  If you can make backup maintenance with delete obsolete;

  RMAN > remove force noprompt obsolete;

  
  

  It works with oracle 9i, 10g and 11g

• State does not change 'source' from mx:Image

  Hi all

  I have this image that the State should display a different image. Here is the code

  < mx: states >
  < name mx: State = "state1" >
  < name mx:SetStyle = 'source' target = '{background}' >
  < mx: value >
  @Embed(source='/assets/images/img1.png')
  < / mx: value >
  < / mx:SetStyle >
  < / mx: State >
  < name mx: State = 'state2' >
  < name mx:SetStyle = 'source' target = '{background}' >
  < mx: value >
  @Embed(source='/assets/images/img2.png')
  < / mx: value >
  < / mx:SetStyle >
  < / mx: State >
  < / mx: states >

  < mx:Image id = 'background' / >

  I have a creationComplete call to 'init' which defines the State as:

  private function init (): void

  {

  background.currentState = 'state2 ';

  }

  But it does not work, no image is displayed. Any suggestions what great harm?

  Thnx

  Luca

  Hi Scaljeri,

  Use this.currentState = 'state2 '; but not background.currentState = 'state2 ';

  You must also use SetProperty and SetStyle not...

  <>

  name = 'source' target = '{background}' >

  @Embed (source = 'img1.jpg')

  .......................................................................................... ...............................................................

  
         
             
                 
  @Embed(source='/assets/images/img1.png')
                 
             
         
         
             
                 
  @Embed(source='/assets/images/img2.png')
                 
             
         
     

  private function init (): void
  {
  this.currentState = 'state2 ';
  }

  Thank you

  Jean Claude

• Access policy does not change the status of resource

  I have a set access policy to assign a role and a resource to anyone in a specific group. The policy work very well for those who have never had the resource before. For people who were in a disabled state resource - access policy is to add the role, but it does not change the State of the resource from disabled to enabled (or put into service).
  
  How can I do so it adds not only the role, but he changes the State of the handicapped resource? Thanks in advance.

  Simple!

  -Create an adapter of the entity during the prior insertion of the Members Group.Group of the user who will be called on the user being part of the group. Add custom java code that will check the resource assigned to this user and confirm if its there and in a disabled state. If its disabled and then turn it back on, otherwise just hang on and do nothing.

  Thank you

  Sunny

• Question on the implementation of the RMAN retention policy

  Version: 11 g
  OPERATING SYSTEM: AIX 5.3
  
  
  I intend to implement a differential incremental backup of my database. My strategy is
  

  Sunday -->     Level 0 backup
  Monday -->     Level 1 backup
  Tuesday-->     Level 1 backup
  Wednesday-->     Level 1 backup
  Thursday-->     Level 1 backup
  Friday-->     Level 1 backup
  Saturday-->      Level 1 backup
  
  Again, the new weekly backup cycle starts
  Sunday -->     Level 0 backup
  Monday -->     Level 1 backup
  .
  .

  First script to perform the backup of level 0 - this script will be run by a cron job every Sunday morning 02:00
  ==================================================================

  run{
  crosscheck backup;
  crosscheck archivelog all;
  crosscheck copy;
  crosscheck backup of database;
  crosscheck backup of controlfile;
  delete noprompt obsolete device type disk;
  }
  
  
  run {
  allocate channel ch1 device type disk;
  backup incremental level 0 format '/u07/rman_backup/FULL_%d_%u' database tag "weekly_full";
  backup format '/u07/rman_backup/RMAN_CTL%s:%t:%p.bkp' current controlfile;
  --release channel ch1;
  allocate channel ch1 device type disk;
  backup (archivelog all  format='/u08/rman_backup/archbkp_dir/ARCH_%d_%T_%u_s%s_p%p' DELETE INPUT TAG "archivelogs");
  release channel ch1;
  }

  The second script for differential incremental backup at level 1 for the next 6 days. This script will run every day
  at 02:00 from Monday to Saturday by a cron job. I have 6 scripts like below, the only difference being the tag "Monday-level 1", "Tuesday-level1"... etc.
  =======================================================

  run{
  crosscheck backup;
  crosscheck archivelog all;
  crosscheck copy;
  crosscheck backup of database;
  crosscheck backup of controlfile;
  delete noprompt obsolete device type disk;
  }
  
  
  run {
  allocate channel ch1 device type disk;
  backup incremental level 1 format '/u07/rman_backup/RMAN_DBF_%s:%t:%p.bkp' database tag "Monday-level1";
  backup format '/u07/rman_backup/RMAN_CTL<%s:%t:%p>.bkp' current controlfile;
  --release channel ch1;
  allocate channel ch1 device type disk;
  backup (archivelog all  format='/u08/rman_backup/archbkp_dir/ARCH_%d_%T_%u_s%s_p%p' delete input tag "archivelogs");
  release channel ch1;
  }

  Question1.
  I want to as backups to become obsolete and deleted as below

  At the end of every week's backup cycle.ie Just after taking a new Sunday's level 0 backup, 
  i need all the old level 1 and level 0 backups from the previous week to get deleted.

  The setting persist following should do the trick. Right?

  CONFIGURE RETENTION POLICY TO REDUNDANCY 1;

  Question2.
  Since

  CONFIGURE RETENTION POLICY TO REDUNDANCY 1;

  is defined. When the new backup cycle begins next Sunday, RMAN should delete the backup of level 0 of last Sunday. Ideally, RMAN should remove all its ' (child) of level 1 backups to Saturday because it makes no sense to keep these level 1 backups when its parent 0 level was obseleted and deleted. RMAN removes level 1 level 0 backup child deleted backups Sunday (when the new backup cycle begins)?
  
  Question3:
  Suggestions that you guys have about the scripts above?
  
  Published by: resistanceIsFruitful on October 30, 2009 06:04

  You have answered your question yourself in your question, when you understand

  Ideally RMAN should remove all its ' other (children) level 1 backups to Saturday because it makes no sense to keep these level 1 backups when its parent 0 level was obseleted and removed_

  Yes indeed RMAN done, did you check it yourself?

  Khurram

• Group Policy does not logon, access is that denied__ - your user profile was not loaded correctly.

  Hello

  Portable autonomous-A of Acer Vista

  any PRO to help me get out of these two errors produced one after the other?

  I got the first problem (the strategy of group...) but I tried to log on again and he succeeded for a few days, but whenever I had to log on and reconnect

  Then the second problem (your profile...) took place and I could not log on with this user acc, my settings is lost...

  Then I had to go to the registry (by searching for help on the forums) to remove the SID, and I also deleted the user account and another

  In as long as administrator, I have no problem, would not restore or backup, cuz my documents would be lost (and will be)

  Now with this user VAC, I have the same problem, seems there is something out there do this boredom...

  Mentioning that I used to use my wireless (access point), but due to an expert (working at the network service provider) that has me using it if really necessary, I prefer not to use (in fact as a promotion I received the package of free wireless access point :)

  I'm not an expert and so here I am left high and dry to understand what could be the trouble maker (or software) program

  The problem is on my nerves. I even tried to account for one-third and untangle by removing the SID and new admin session of the ACC, and restart, but failed to fix.

  PLEASE HELP ME AS SOON AS POSSIBLE

  Armi

  Corruption user such as you are experiencing may be caused by several things: malware, failure of hardware, the corruption of system files because of inappropriately, etc.. So to begin troubleshooting:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean and the problem persists, test the equipment starting with the hard drive, then the RAM.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  In all cases you should backup your data on external media such as an external hard drive or USB thumb drive NOW.

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.