Retractable module question

Similar Questions

• cDAQ Module Question

  Hello

  I currently have the following equipment:

  cDAQ-9178

  OR-9401

  OR-9219

  I use the module OR 9401 to drive the output PWM signals is calculated by a PID controller in two controlled thermal systems.  I use the NOR-9219 module to measure temperature, such as remote sensing by thermistors.  These temperature values are used in my PID controller to calculate the error.

  I am now interested in measuring a number of other temperatures on my device using thermocouples (these temperatures are necessary only - no controller action based on them).  9219 module is ideal for my PID controller, that I can use to detect the very precise Thermistors, but it has only 4 entries.  I'm considering adding a NI 9213 Module to my setup to activate the additional analysis that I need...  My question is this - this module will be compatible with my setup?  for example can I simultaneously run two analog modules (9219 & 9213)?  Is it reasonable to try to make the PID regulation and this extra temperature monitors simultaneously?

  Thanks in advance for your comments!

  See you soon!

  Hello JB_1,

  What is are describing is undoubtedly reasonable and feasible with the hardware you have.  9178 has several Motors synchronization to analog input, so you can configure separate tasks for two different modules if you want to acquire simultaneously and at different rates.

  -Christina

• Upgrade to version 6.0 SourceFire Module questions

  We have just implemented SourceFire Module version 5.4.1 on our ASA recently, but want to upgrade to version 6.0. I've been through Notes version 6.0 for the upgrade, which are dated to November 2015, but had a few questions that I was hoping someone here could answer:

  -Our FireSIGHT Management Center is a virtual appliance of 64-bit. Can we install version 6.0 on a virtual appliance VMWare running on EXSi 6.0? The only issue date list 5.1 and 5.5 ESXi ESXi.

  -Should what files I use for the update? The Release Notes say to use "SourceFire_3d_Defense_Center_S3_upgrade - 6.0.0 - 1005.sh. My choice on Cisco's Support site are: asasfr-sys - 6.0.0 - 1005.pkg, asasfr-5500 x-boot - 6.0.0 - 1005.img and Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh. I guess the sys-asasfr - 1005.pkg - 6.0.0 is for CME, and the Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh is for the ASAs.Is that right?

  -How long will the update for FMC and ASAs? The ASA is a 5516 x and the release notes look like they say that the update will take about 41 minutes.

  ESXi 6.0 is not officially supported so that your experience may vary. If you get stuck, you may TAC by telling you that you're on your own.

  "Cisco_Network_Sensor_Upgrade - 6.0.0 - 1005.sh" is used to upgrade the fire ASA power module in the Manager of firepower.

  If you were a fabricated construction or reimage then you would use the boot images and sys respectively.

  41 minutes for CME is right. As mentioned Philip, 2 hours is a better estimate of the ASA module, especially on a smaller area as the X 5516.

• LR CC develop Module questions

  Hi all... I write today as I just ran into this issue with the develop module. I have the photographers of CC version that is installed on my machine main home as well as my laptop to the mobile edition. I got the apps installed and working well for a long time. Recently, I upgraded my laptop with a newer machine (I7 Windows based). I logged into my account on my old laptop and machine at home so that I could log on the new laptop. I connected successfully on my machine at home as well as the new laptop. I even edited photos on both machines. A few days ago, I tried importing and editing photos on my laptop. They have imported and I can see them in all the modules in Lightroom, but module development now as completely pink picture area. I rebooted and registered in and the question remains.

  I have attached an image showing the problem and system information. Any help would be appreciated.

  

  Try turning off the GPU.

  Go to Edit Prerences > Performance and uncheck CPU graph use.

• Two Modules questions: Debug & amp; Events

  Hello
  
  I have a question and a question regarding the Modules:
  
  (1) I use the Mac beta version and for some reason when I build a Module project or select the 'Run the Application' option for the MXML Module file, the debug version of the SWF file is not be compiled. As far as I know, the settings that I currently don't prevent that from happening. Anyone has any idea why? I'm puzzled.
  
  (2) if the events are dispatched via a loaded module, the Application loading it can register listeners for events? I can't find a clear answer to this anywhere in the documentation. You would think that this would be referenced somewhere, whether it is possible or not. I really hope that it is possible.
  
  Thank you
  
  Justin

  Hi Alex,

  Thanks for your response!

  What I was looking for to confirm, is that events sent from a Module will be spread through the Application that loaded. I confirmed it works, at least when the Module is implemented in MXML. I tried the same thing by using a module based on ActionScript and had the opposite effect, but that was before I determined why the debug version of my module SWF file was not compiled bein, who was...

  Apparently the debug version of the SWF file is compiled only if your Module is set as the default Application for a project. It may or may not also be a problem to have that Module value to compile in Flex Modules of the Application Properties dialog box. Once I put my Module as the default application and removed from the Flex Modules dialog box, I had the SWF, I needed to debug. Now I need to test this with a Module based on ActionScript, but given the documents for events, unless my ActionScript Module is on the DisplayList, the event will be distributed directly to the target and the Application will not be aware of the event.

  Your example will be great for cases where I need to make an application aware of the user to interact with the components in the Module. Thank you!

  -justin

• Tecra 8100 memory module questions

  Does anyone know if the ram PC133 144 pin for the Tecra 8200 can be used in the Tecra 8100? I think that the Tecra 8100 usually takes PC100 144 pin but I'm having a hard time getting suppliers to tell me about the PC133 so (probably because it is half the price).

  Hello

  The Tecra 8100 uses these memory modules:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  Also check this site:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7446&ft=m&St=3

• GPS module question

  I am interested in the mini notebooks with GPS module - I would use the netbook instead of my current GPS (one less thing to carry on a trip), but there is limited info on exactly what this integrated module GPS can/cannot do.

  First, HP Navigator software, it's a service to purchase a monthly subscription to?   I found this on the HP website: "the Navigation is free for a trial period of 30 days and requires paid activation after the trial" what?

  Secondly, this navigator software provide the voice directions 'synthesis' or provide audio or is it simply Visual?

  Thanks for all those who respond

  McHP,

  Navigation in the browser of HP is free for a trial period of 30 days and requires paid activation after the trial. I am not sure the speech synthesis.   Marketing of information is here:

  http://h71036.WWW7.HP.com/HHO/us/en/pclc/articles/navigation-mapping-software.html

  The GPS module will be working with other navigation software.

  -wes

• Develop Module Question

  I am a new user of LR.  I have an iMac, OS 10,10,4 and CC PS and LR CC versions.  I really like quick settings that can be made in the develop module.  When these adjustments are transferred to the original photo or the do, they are transferred.  I make the adjustments in LR and then look at the image in the Finder and nothing has changed with the original and there is no copy of the original...  When I opened the photos in PS, it's like start over with the adjustments.  What I'm doing or not doing correctly?

  Thank you.

  This is the concept of LR - not destructive.

  Your originals stay intact. To view the results with an external program, you need to export, where your changes are "cooked."

  Read here: using Adobe Photoshop Lightroom | Export photos from Lightroom

  And here's how to get to PS from LR to edit and return to LR... https://helpx.Adobe.com/Lightroom/help/editing-Photoshop-or-Photoshop-elements.html

• Flex Module questions

  Help, please!
  I was not able to locate my apache configuration file during installation!
  I know it's at/etc/httpd on my mac, but how can I do this during installation. I don't think that there is an option to install with terminal? I don't know how to say file system to look at the root of apache of fins.
  
  Can someone please help me to install it. I'm a newbie only to learn, and this will be useful for me.
  Thank you
  John ([email protected]

  Hello Cristian,
  Thank you very much for your help, I really appreciate your help me through setting up this module flex for my Mac'-'

  If any body has any problems with that, send me an email, and I can help out you. Given that Cristian has helped me a lot, I'd be more than happy to help someone else who is having problems with this.

  John

• Prepare the form tool module question

  Hello

  I have Adobe Acrobat Reader with a DC pro subscription. When I try to add the tool shape to prepare for my Add ons, I get redirected to a subscription page. When I try to buy the subscription it tells me that I already have a subscription, but is not clear how to add the shape tool prepare.

  Can anyone help?

  You must use Acrobat DC, not Acrobat Reader DC...

• Request module question

  Hi all
  
  What is the difference between AppModuleLocal and AppModuleShared?
  
  Is it necessary to have both of them in the application?
  
  Concerning
  Mohsen

  Doc http://docs.oracle.com/cd/E35521_01/web.111230/e16182/bcservices.htm#sm0203 and http://docs.oracle.com/cd/E35521_01/web.111230/e16182/bclookups.htm#BABEIAIB
  pretty well describes the difference.

  Timo

• Why not Yahoo/Firefox Toolbar update or Firefox Add-ons don't load not?

  There seems to be some glitches with Yahoo/Firefox toolbar new - it will not refresh and I have all the bookmarks stored there.

  "" Then after a couple hours of troubleshooting, I find as tools > Add-ons Manager "DON'T to LOAD NOT?

  I saw Yahoo Toolbar in the past to do this, but generally refresh.

  At the beginning of this writing about 4 minutes ago, I clicked on tools > Add-ons Manager and I see is "LOADING" - IT IS NOT LOADING.

  Can you help me, or should I go for Crome? Ty

  Thanks for the reply, happy to a here Yahoo toolbar is compatible with firefox again and works with Firefox 6.

  See also my comment on the modules /questions/862423 #answer - 234471 maybe watching this thread, you will get answers about Add-ons does not.

• What are plugins?

  I try to edit a file and get the message that it can't be opened because I don't have "shared content. RPLN"installed as a plugin.

  Hello John

  Sorry to hear that you're having trouble with the file. We actually only support modules questions in this forum. I don't think that your problem is related to the modules? It really depends on what file you are trying to open, and with which application. This looks like a problem to InDesign CS5? In this case, you can ask for help on the InDesign forum on update plug-ins.

  There are also a few articles of YouTube on this (how updated Adobe InDesign CS5 plugins - YouTube). You can get help from a search for this error.

  Kind regards

  Krystal

• Question about warranty after exchanges of RAM on Satellite module series

  Hello together,

  I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
  Thanks in advance for your answers.

  Concerning

  TiG3r

  For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

  If Toshiba offers something like this he won't have the negative influence of valid warranty.
  Buy a compatible module and RAM upgrade.

  Bye and good luck!

• Question about the common Modules on Satellite Pro A60

  HI - first post!

  Looks like it's a bit a 'common' (see what I did there;)... too bad..) fault - but what driver file has these "common modules"? There is nothing in the list for the A60 Pro Sat that says "common Modules".

  Can someone point me in the right direction? Or is it just a case that they've got to be in the order of some? Will I have to uninstall all then repeat? Can I ask more questions?

  Thank you very much in advance,
  Phill

  Hello Phil

  Common modules is a kind of base for the other Toshiba application designed tools and utilities, and it must be preinstalled in a first time. Is very important that the common modules is not available for each laptop model. Why is that I can't tell you.

  I checked Toshiba download page and I didn t find listed common modules for your device, but I found the instructions facilities document. If you want to install the operating system on your own please install things in the right order.

  If you have any other questions, please write again.

  Good bye