Retrieve the Spfile

Similar Questions

• After retrieving the system for a month, the tabs are recovered for a month there are too

  Furthermore, I guess, all my settings are retrieved from a month there, but I noticed that the tabs. I guess, the recovery of the system retrieves the AppData folder, there are a Firefox settings. It's okey if I have no problems with my system, but I have... many of them. In the opera, the system recovery does not crash my tabs, Favorites, or something else, even if its settings are in the AppData.
  What should I do to avoid this behaivour reset settings? Is - this deficit SQLLite?

  The extension of the Session Manager has options (1) create a backup when you exit Firefox and (2) locate in a different folder. I have not tested, but could be useful for you.

  • https://addons.Mozilla.org/firefox/addon/session-manager/
  • http://sessionManager.mozdev.org/options.html#advanced ("helps users replace the default location to store saved sessions")

• Recording on DVD - "Unable to retrieve the table of contents" error

  Hi all

  Whenever I try to record on a DVD a face "could not retrieve the table of contents.

  I tried to change the recording speed, but no use.

  When I go to properties of DVD and click on activate record it does not recognize the DVD or any CD in the drive.

  Please help

  Hello

  1. what software to use to burn cd/dvd discs? Try using Nero, Ashampoo burning studio, alcohol CD and DVD software of engraving,
  2. then, I advise you to use high quality as TDK or Verbatim media.

  3
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait for the CD/DVD drive would appear once again

  If your problems persist, there may be a problem with your cd/DVD-ROM

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• Crash in firefox that I open it: How can I retrieve the addresses of Web sites in my bookmark? If all is lost?

  Firefox crashes when I open it (Mac OS). How can I retrieve the addresses of all the Web sites in my bookmarks before attempting to reinstall firefox?

  ID of the Crash

  c427216d-8a2f-8b48-Beca-50074acfbc6b

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; TI - TI) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  Yes, all your personal information is stored in your profile folder.

  Again, see back up and restore the information contained in the profiles of Firefox to manually back up your profile folder. This article also contains information about what information is stored where (for example, Places.sqlite for bookmarks and history).

  Then save that manually uninstall Firefox and delete the profile folder. Then you should be able to do a completely clean install and then restore your settings accordingly.

• Need help to retrieve the Satellite Pro C850 - 1 k 3

  Hello

  I'm new to this forum, but I really need someone's help that my laptop has had a virus on it, and I have to do a complete uninstall of windows 8, (it was preinstalled, so I don't have a restore disc)

  Every time I try to uninstall windows it says that some files are missing and to insert a disc of recovery of some sort that I did not.

  How can I do this?

  Thanks in advance for assistance.
  PS: I tried to create a recovery with a blank dvd disk but it says insert USB pen, I did not.

  > I tried to create a recovery with a blank dvd disk but it says USB pen insert, I did not.
  Usually, you can choose between USB flash memory and the DVD disc.
  Did you change this option before trying to create the recovery media?

  > When I try to uninstall windows it says that some files are missing and insert a disc of recovery of some sort that I did not.

  I have no idea what you tried to do, but the fact is that if you want to retrieve the laptop, you must use either the Toshiba recovery media (USB key or DVD disc) or recovery of HARD drive option, you can try:
  More details [here: http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

• Cannot retrieve the Satellite to factory settings after installing Win XP

  I was running windows recovery then I chose 'delete all data... '. "something like that.
  Then in the Middle by mistake I turned off the system.

  After that, I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  I tried pressing the "F8" key and also the '0' key when the computer starts to "toshiba" logo but it is still not send me any option to get my computer back to windows vista or you can say "out of the box.

  One important thing is, while installing windows XP its show me this HARD drive recovery exist and 973 MB is free off 5665 MB. This means that I have still all windows and the drivers on the HARD drive. Now please help to return normal system recovery or BOX STATE.

  > After I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  The installation of Win XP has damage and remove the Boot Manager and options preinstalled by Toshiba and backed by Toshiba picture.

  This means that if you will be unable to retrieve the device using the drive HARD recovery option.

  You could retrieve the device back to factory settings using only the Toshiba recovery disc! But I guess that you didn't create this disk is good?

  Well, in this case, you can order this disc from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite A505 - How can I retrieve the registration information

  I bought a Toshiba A505 in March 2010. Currently, I registered the product with Toshiba. This laptop was stolen. How can I retrieve the registration information. Unfortunately, I don't have the serial number or product.

  Thank you.

  Hello

  You should get in touch with Toshiba using the stolen units interface.
  http://EU.computers.Toshiba-Europe.com/innovation/generic/STOLEN_UNITS_SUPPORT

  Here, you should go to the point: * registration *.

  Hope I could help you.

  Welcome them

• Cannot retrieve the Portege R100 by using the recovery CD

  I replaced the HARD drive on my R100 not having the original. Thank you to help on the forum, I managed to solve a CDROM with a PCMCIA connector.

  I got through the recovery screen and choose option 1 - retrieve the entire disk. He got a disc of part way through 1 when he did not play a file. I then ran it again, but the selected option 2 - Toshiba Recovery utility and it started and then failed with the error - "cannot open TOSH_REC. COMMITTED AN ERROR."

  Where else?

  Thank you

  Ian

  Hello

  Have you replaced it with all new HARD drive? It's very strange question and if the HARD drive is nine something like that shouldn't happen. You have the FDD to check the HDD with FDISC? Please use the floppy drive and boot the disk to check the new HARD drive.

  Somehow, I feel that there is something wrong with this new HARD drive.

• [redacted] Pavilion v208tx: we could not retrieve the list of drivers for your product. Please select the desired operatin

  I can't find drivers... tried to reload the page for a bunch of times... quiting browser and re open... I pressed the bunch of times update I tried different OS and it still saying "we couldn't retrieve the list of drivers for your product.  Please select the operating system"oh and he

  Hello

  Thanks for posting in the HP Support forum.

  It seems it was some website temporary glitch - it works for me now.  Could you try again?

  

• Can I hold ThisContext go a step and use it in a later step to find the name of the current stage? Error 1 when retrieving the name of the step.

  I am trying to create a generic message using LVOOP logging class.  The recorder would include information on stage during execution (name, sequence, etc.).  I would like to create the message object log and then move it into another object (communication, controller of oven, etc.).  Everyone should get its own copy.  None of this is a problem to date.

  I found ways to gather the necessary information to ThisContext.  However, this only seems to work if ThisContext is spent in running step.  If I want ThisContext in LVOOP, the next step to try to use causes an error 1 "an input parameter is incorrect."  Is it possible to get this kind of information (name, sequence, etc.) without ThisContext in at each stage?  It would be inappropriate to do so, but if necessary I will.  It does not go against LVOOP.

  Summary: Can I hold ThisContext go a step and use it in a later step to find the name of the current stage?  If not, is there an effective way to do this?

  My solution was to store the reference to thread.  At each step, I can retrieve the current context.  This is valid only in a thread, but meets my needs.  I could also move something to a higher level, but it would need to know the thread that interests me in any case.

• Failed to retrieve the DIAdem DataFinder research data, using data-finder toolkit LabVIEW 2009

  I am facing problem to retrieve the DIAdem Datafinder data.

  At first, I developed this project in LabVIEW 2010. But because of a problem that I met in LabVIEW 2010, I thougth to work on the project in LabVIEW 2009.

  Then, I reused the project that I created using LV 2010 using option economy for the previous version.

  When I tried to retrieve the data from the tiara using data finder toolkit. I got a 305505 warning. Please see the attached message of Warninig.

  But I have not seen this warning while I was working in LabVIEW 2010 and also, I was able to get the data from the tiara.

  Please suggest me a way to solve this problem.

  Hi Nanda,
  There is a bug when using the SDK use in combination with DataFinder Toolkit 2009.
  This bug is already fixed in LabVIEW 2010 and use SDK 2010. But as you said there is another question in LabVIEW 2010, forcing you to LV 2009.
  I suggest you use LabVIEW 2009 with use SDK 2009 and DataFinder Toolkit 2009 and instead to use the "Waveform.vi results" to read the search results, I would recommend to use the screw storage. I spread your example VI and it attached to this message. You will still see the dialog box to search for "lvStorage.dll" but it will automatically disappear and the VI works anyway because in this case LabVIEW will find the dll itself.
  My extended VI uses the '_openWithRoot.vi' to open a file with a different use than CT or PDM. This VI is also described in the following knowledge base article: http://zone.ni.com/devzone/cda/epd/p/id/4181
  With LabVIEW 2010 use support has been enhanced and fully integrated in the standard palette of storage screws. So in LabVIEW 2010, you can replace the "_openWithRoot.vi" with the 'Open Data Storage.vi' standard but with LabVIEW 2010, you can also use "Waveforms.vi results" to read the search results.

  I hope this helps.

  Kind regards
  Eva

• Retrieves the name of the variable

  Hello

  I'm trying to change the OpenG changed? Subvi (see below) so that he will write the new value of the variable sent to 'Variant' if changed on the disk (using the following config VI). To do this, I need to somehow extract the variable name of the variable (any type) which was connected to the entrance of variant of the changed? Sub - VI by VI calling so that I can use it as a key name. Is this possible? This information is still transmitted to the Subvi?

  

  If you use openg, there is a "Get the name of data" function that retrieves the name of the data passed in the Variant.

• Recycle the OCR in LabVIEW (retrieve the index of characters found in the set of characters file)

  Hi all

  I'm trying to recycle my set OCR file in LabVIEW. Basically, I show the reading string to the user and in case something goes not the respective character must be corrected in the charatcer set file, according to the text entered by the user. It sounds pretty simple, but I haven´t find a way retrieve the character index in the file must be recycled. For this I would be needs to know what character in the set file has been found to resemble one give read character. Do you know how I can get this info? I intend to use the OCR rename character VI.

  Best regards

  Esteban

  Hello Arroyo,

  You can retrieve the total number of characters formed using IMAQ OCR VI property and looking for property "size of char set.

  http://zone.NI.com/reference/en-XX/help/370281W-01/imaqvision/imaq_ocr_property/

  Kind regards

  Elli

• Insider source subscription. Could not retrieve the client certificate

  Hi all

  I created subscription source initiated between two Windows 2008 R2.

  The source (client) cannot connect to the server. Logs on the client:

  Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port

  Authenticate the user using the Client certificate mechanism

  User authentication failed. The credentials did not work.

  Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)

  WSMan enumeration operation failed, error code 5

  Opens a session on the server.

  Sending HTTP error to the client after a failure of transportation.
  The HTTP status code is 503
  The error code is 995

  Could not retrieve the client certificate

  Send the HTTP 401 response to the client and disconnect the connection after sending the answer

  The user authorization failed with error 5Authorizing the user

  Authentication using client certificate with the client.corp.domain.com object is successfully

  How to fix the error "unable to retrieve the client certificate?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.