Returning constantly to changes

Similar Questions

• When you modify a form in the DC or Pro Player I can enter text etc., save, close, and return later to change it. However, once I use the function "Fill & Sign" and save the document, it locks the file and all other fields are not editable. Is there a

  Hi guys,.

  When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.

  The signing is FINAL.  You cannot sign a PDF paper advance. Complete and save, do not sign.

• Error Windows Updates 'configuration of Windows updates fail, returning of the changes.

  Updates to the title: original Windows.

  That means 'configuration of the Windows updates fail, returning from changes '? My laptop has been updated but got stuck on 12%, and would not go further. It is restarted 3 times and only went up to 12%.

  Was actually able to solve this problem through more research. It turns out that his receiver of wireless mouse and a SD card was stalled the installation program. I don't know why but I turned off the machine (long press the button), remove, checked all other ports, block tire and cord then put back the battery and card, turned on and it ran through the installer without problem.

• Return the form / change Dynamic Binding / multi-Language

  Hi all

  I'm trying to create a form to take charge of the user to change the language in real time.

  So I would like to know if I can:

  (1) change the bound field dynamically

  If I can prepare some game data and link that I need, but it seems that I still need to trigger the of to return.

  
  

  (2) Refersh form after the change of the bound data

  I tried something like this:

  xfa.datasets.data.mainData.sfDDLInfo02.loadXML (xfa.datasets.data.mainData.sfDDLInfo01.sav eXML (), 1, 1);

  or this:

  xfa.datasets.data.mainData.sfDDLInfo01.Key.value = "key";
  xfa.datasets.data.mainData.sfDDLInfo01.Value.value = "value";

  And this success to update the data set, but the dropdown menu with binded on it do not update...

  Concerning

  Bill

  If you do a xfa.layout.relayout () command, which will again cause the form layout. If you just want to merge the data dom once again, you can do a xfa.form.remerge (). This reinstall can also cause a new provision, if there is a change to the data.

  Paul

• "This connection is not approved" returns constantly to paypal

  From eBay to paypal I get contently "this connection is not approved", and there is no place to go to fix it.

  Hello

  Please also try this: https://www.paypal.com/

  If the problem persists, you can also consider the function of Reset Firefox via help (Alt + H) > troubleshooting information.

  (To return to the previous mode, you were using, close the new profile (i.e. Quit Firefox), start Firefox and choose the default user profile.) Alors_que Profile Manager is open, you can also remove the reset your profile (the one containing the random numbers) or the old profile, as appropriate). If the reset is correct, it would be a good idea to delete the old profile as otherwise it would be left intact with the previous data before deletion.

  Profile management

  Profiles Howto

• Failed to install KB2898785. Error, "updates were not correctly configured. Returning from the changes.

  32-bit o/s. Vista Home Premium. All scans/checks indicate no problems

  "Updates were not correctly configured. Restoration of the changes. ....." Advice please?

  M/S Rep told me that the (free) support for Vista is no longer available. Could the problem of security identified in the software of M/S already affected my system (published 12/10/2013 refers)?

  Hello

  I wish that refer you to this article-

  https://support.Microsoft.com/kb/949358/en-us

  Note: Make sure that you get the computer back to the Normal start once you have completed the troubleshooting steps.

  Make sure that you back up the data on the computer before you continue.

  Thank you.

• updated configuration failure Vista - updates not configured correctly. returning from the changes - code Error 80070020

  Updates installation but to the message indicating a configuration step 2 bed 'updates not configured correctly. reverting changes"error code is 80070020.

  http://support.Microsoft.com/kb/883825>

  08/10 / 1106:12:26

• error recovery Windows returns constantly to the start without reason...

  Hi I recently got windows 7 Professional 64-bit my Thursday school last burn on a dvd. Everything seemed fine after installation, and such as Saturday when he starts in front of the screen of bio and then pop up with error recovery windows telling me that windows wasn't one to repair or start normally anyway would it continue to go to this windows error recovery screen bit whatever I chose. These events eventually led me to believe that my hard drive has failed in which I had a brand new only on Sunday and installed fine all appeared while Monday morning he started to blow upward with the same error message I could try the repairs say it was very good, try and boot and it would restart again. Fortunately I was able to install my Vista Edition home premium 64-bit, which seemed to be ok for most of the day until yesterday when it grew up the windows on error with the options to use the last configuration or start normally (due to the recent hardware or software changes, but I have not install anything new in terms of software or hardware) that works , but im not sure for how long. Im very tech savvy for my age and know what im doing with computers, but I can't seem to understand what is happening since it is a new player none of my hardware is a failure and I don't know.
  Appreciate any help...
  Colin

  Repair system solves most of the start-up problems.  Some computers have startup repair pre-installed otherwise you will need a CD/DVD of Windows Vista.   If your system still does not boot in Windows, follow these steps to repair the boot sector.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 fails to configure updates "returning from the changes.

  Hello

  I get this message after Windows tries to install updates at startup... "failure of windows configuration updates from reinstatement of changes"

  1. once I get this message that I start correctly on Windows and that my system works ok.

  2. Windows 7... 64-bit... .latest service Pack installed.

  3. it was an upgrade of Vista 64 bit... but works very well since 8-2010 when I installed Win7

  4. I ran sfc/scannow and it reports that everything is ok

  Any ideas?

  Thanks in advance

  Thank you that worked for me even if I don't have to go to the Microsoft download website.  I checked the history of update and there were a few who failed to update.  He said there was updates had to wait to be downloaded so I clicked on that and then selected the updates, click on the bottom. I think he may have said then or download it now.  It took me back to the update page where I chose to update.  Which corrects the problem.  I have them one at a time incase there was a special that was causing problems, but they fine all the updates and my computer restarted normally

• How can I get the circular cursor return cloning, it changed from one day to the next day at a type of line of sight...

  HI: I use 14 items, were to deal with a large number of RAW files... shut down last night, started once again today and the tool "clone stamp", I can't get the circular cursor in diameter I want, it only gives me the type of the cross... I changed anything myself... need the circle again!

  brucet32720494 wrote:

  HI: I use 14 items, were to deal with a large number of RAW files... shut down last night, started once again today and the tool "clone stamp", I can't get the circular cursor in diameter I want, it only gives me the type of the cross... I changed anything myself... need the circle again!

  Make sure that the ALT key is not stuck

  Go in Edition > Preferences > display and cursors. Other sliders: Standard is the default value.

  To change the size of the cursor, use the support according to the letter P on your keyboard. ] increase [decrease.

• I just bought a Kodak printer that prints well on IE but not Firefox - gmail after clicking on print, a backup as a box returns constantly upward... Please advise.

  I contacted Kodak... their support, said this problem is a problem of Firefox because there is no problem with printing of the documents/email using IE... only with Firefox.

  File > print

  This printer is selected in the printer - name?
  
  Is printed to produce the selected item, middle right of this dialog box?

• I accidentally hit the Ctrl key while sending an e-mail and now what looks like a musical symbol returns constantly with hyphens between each letter

  the symbol is hard to describe how to reset everything as it was before.

  Hello steveayala,

  This thread has been created in the Microsoft answers Site Feedback forum. the Microsoft moderation team has moved this thread to networking, line and Forum Email.

• Hi, I am trying to install updates (as I usually do), but for the last month he returns constantly with error code 646 error - unknown

  I have a lot of important to install updates & it won't let me. I can't seem to find solutions to this problem, I am not all that computer letter so please keep answers in singles. Thank you

  You may have overlooked: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my windows installer returns constantly without reason, especially when I am connected. He keeps asking companies to office must be installed.

  whenever I try to open a session on the enternet 'windows install' lights and will not stop enterupting me and office business application must be installed.

  Look at this: http://support.microsoft.com/kb/555175

• "Updates were not correctly configured. Returning from the changes. »

  3 days in a row, installs the updates in the usual way, and then uninstalls them - it's a frustrating and major time waste trying to connect.  Nothing in Microsoft 'help' allows it.

  I checked the list, and the problem seems to be update for Microsoft Security Essentials - KB2866337 (4.3.219.0)

  Manually update the MSE: http://www.microsoft.com/security/portal/definitions/adl.aspx