Review help and advice

Similar Questions

• A brand new user has need of little help and advice...

  Hello

  I just took the bold gamble in Indesign and it's the first day of my 30 day trial.

  I need help and advice from you folks... Please.

  I have been successfully creating Brochures A5 (A4 folded) using MS Word and print it on a desktop printer. MS Word sorted my order page for me when printing to the correct pages have been implemented.

  I read as much information that I could find, but I'm still able to do the same in Indesign.

  I'm looking forward to you use the advanced functions of layout and have control over what I do, but I need to work on this fundamental step before going any further.

  I hope that what I explained is logical.

  Concerning

  John

  So presumably you create a new document, the portrait of the A5, facing pages. Make sure that your number of pages in the document is a multiple of 4.

  Create, type, twist, meditate, edit, smile, save.

  To create your booklet using InDesign, on the file menu, select print booklet.

  You will probably need to jump back from the button print settings, adjusting the size paper, Orientation, color, and in the print tab booklet for 2-high shot on horseback.

  A large part has been posted on this topic, these are the basics, printing booklet is not the best module ever written Adobe, IMO

• WHEN YOU IMPORT PHOTOS FROM DISK HARD EXT, 92 000 IMPORTED OK, THEN HE STOPPED WITH MSG: IMPORT REVIEW: COULD NOT PERSIST MASTER, EXCEPTION CODE: EXC_1386_GPFLT.  STILL HAVE 50,000 PHOTOS TO IMPORT.  NEED OF HELP AND ADVICE.

  Can you please help me with importing photos from an external hard drive.  92 000 images transferred, then import stopped with the message: IMPORT CRITICISM: THE PERSISTER MASTER FAILURE.  EXCEPTION CODE: EXC_1386_GPFLT.  A lot of pictures in the last implant, but was very blurry.  The 92 000 that has been imported successfully are very clear.  I re-tried the import process is the same.    could answer you to * @aol.com

  How the photos were initially stored on external drive? This software has been used?

  What software is used to import the photos?

  Really not post your e-mail address here on these public forums where she can by harvested by scammers. I asked that Hosts change for you protection.

• Windows Media Player 11 Error Messages C00D11B3 blocking Digital Media Broadcasting ideas please help and advice?

  Laptop sony vaio windows XP version 2002 service pack sp3 operating system

  and it's systems to upgrade windows 7 optional test and safety devices and

  This modernization was just recently when I noticed that the old version will

  obsolete and I already downloaded the windows media player 11 last year

  Since then, I have optional upgrade to windows 7, I noticed that windows

  Media Player malfunctioning my free audio visual spectrum, some functionality is

  works not properly espicially g-force and whitecap is absent from the screen

  and his completed the program with the C00D11B3 error message is you guys

  have and ideas to solve this problem? "' or ' you have something free

  software that can solve this problem please give me advice because

  I already try to solve the problems and to dig little fishy on mine, but I don't know

  where to go this eror message c00d11b3 and some of the characteristics of the network

  isn't vessible it makes me confused as proxy for media player / / please give

  me advice what features can I ask my Media Player if I go back to the old

  Version? 'or' I pass by...

  Thank you for giving me the time and your understandind.

  "Sincere friendship" * address email is removed from private life. "

  Although the URL is for win 7, it is always very instructive in the problems with WMP11.

  http://Windows.Microsoft.com/en-my/Windows7/C00D11B3

  This thread may also help.

  http://www.TomsHardware.com/Forum/88631-45-Windows-Media-Player-error-c00d11b3

• Need help and advice of HP PAVILION DV6-6141 pilot!

  Hello

  Just got a HP PAVILION DV6-6141

  basic specifications:

  Win7 64 bit

  Intel Core i7 2630QM 2 GHz

  8 GB of DDR3 memory

  6770 m 2 GB

  And I was wondering so people could help me with a driver update advice for her, because I don't want the laptop from top and die on me if I make mistakes!

  1.)

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5154596&...

  Is this the right page to receive my drivers of for the HP PAVILION DV6-6141?

  If not could someone help direct me to the right page?

  2.)

  At startup, the bios indicates version: F.17, but I was wondering what the latest compatible version for my laptop?

  (I am double checking so I saw nothing!)

  3.)

  I recently tried to update all the drivers 6770 m ATI on this page that I linked above (could have been a mistake), everything works except for some bugs with the textures and games seems to crash on a regular basis

  4.)

  Is there any other kind of drivers that are compatible with the 6770 m to improve the performance of game and maybe stop the crashes/bugs, I saw people talking about modded drivers on this laptop, but I don't know where to start!

  Also if you know any good guys messages-son to help with this (if they have already been made) would be great!

  Thank you

  Here is the correct driver for your model DV6-6141eo download link:

  http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?CC=US&DLC=en&LC=en&os=4062&Product=5154595&sw_lang=&Tool= &

  F.1b is the latest version of the BIOS available for your model. Here is the download link:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100034-1&CC=US&DLC=en&LC=en&os=4062&Product=5154595&sw_lang=&Tool=

  Here is the link to the latest graphics driver for your system:

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  If you have already installed the latest graphics mentioned above, you can try the following driver:

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54462.exe

• In big trouble and the refectory. Really need help and advice.

  Hi everyone, I'll try to be brief and make me delete the cause that there was a strange turn of events for me. A good friend of mine sold me his laptop: Acer Aspire 7560 G. Good enough for me to was for very occasional use. The laptop has dual boot: Windows 7 Family edition provided with the computer and Mint Lixux for which my friend created partitions. Last week, I decided to make the leap to Windows 10 via the free upragde. The process went well until the end when I was informed that there was not enough space on the partition of Windows 7 to complete the installation. So I went to my friend, so he could adjust the partitions in a more balanced way. He said that he could do. Of course, he is the one who partitioned the disk in the first place to the account of his love for Linux. I decided that I couldn't live without Linux in order to have a larger partition for Windows 7. My friend wiped the partition Linux and Windows 7, leaving for me recovery mode partition to reinstall the operating system, after that the other had been moved a little. In fact, he can never enter into Recovery Mode. Hours spent, and he did not want the best solution he found was to install a rather well preserved box of Windows 8 a friend of his who was given with a computer. Installation of Windows 8 is going very well, we had the key and everything. I'm not a Windows Guy. I'm a Mac guy my knowledge is limited, but I want to learn. Sometimes the Apple you know. The OS installed, but asked something like formalizing Windows on my computer. Now, I reinstalled Linux and I do not see the Windows 7 recovery mode. Is that mean I lost my chance to spend freely for good? This Windows 8 is not even mine, he's a friend of my friend. I'm really upset and I think someone has caused me major problems. Can anyone help please?

  Nice S.

  You have the product key of Windows 7 or Windows 8? If so, simply download Windows 10 then perform a new installation:

  How to download official Windows 10 ISO files

  then

  How to: perform a clean installation of Windows 10

  then

  How to: install and update drivers in Windows 10

  After the upgrade to Windows 10, you cannot use your Windows 7 or Windows 8/8.1 product key.

  Click on this Later.

  

  Check if you have installed November update:

  How to check if you downloaded or installed the update Windows 10 November

  If you do, then all you need to do is change the using your Windows 7 product key or product key 8:

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  

  If you continue to experience problems, contact support:

  Activate your Windows 10 license with Microsoft Chat support

• Help and advice Windows 8

  I searched in vain this tile announced in the demo for assistance.

  Can someone there to point out for me?
  Pierre Beaudoin

  Hello

  Of the Start screen, start typing Help + tips until you see on the right, and then select.

  Help is also accessible via the charms bar , then settings then help.

  You can also get help here:

  http://Windows.Microsoft.com/en-us/Windows/support#top-solutions=Windows-8

• Help and advice with programming side host

  Hi all
  You have to connect the Java Card reader (+ Java Card!) for a powered ARM embedded system under Debian Linux.
  Now we must essentially the host program that sends the APDU to the card and receive responses from the card.
  This program must be in C.
  
  I have been coding bits of Java Card on my Windows laptop and have been the installation using GPshell.
  
  I have the card and the following card reader:
  (a) 3310 SCR from SCM Microsystems - smart card reader
  (b) Cyberflex access 64 k v2c Gemalto (formerly Axalto)-Java Card (JC Supports 2.1.1 and global platform 2.0.1)
  
  My question is this:
  Time to test my applet, I use GPshell commands. GPshell works with Linux (powered by an ARM processor)
  
  I understand that the global platform is a library and can be used to program the side host to communicate with the card chip. Can it be compiled for Linux? I have no idea how I'd do for an ARM based system.
  
  I'm very fragile on the host side of things party. Please throw much light on this piece as possible - it will save me a lot of heartburn later, believe me!
  
  Before I started working with JC, I was under the impression once the connection with the card setup, to just send the APDU (has the JCWDE emulator) to communicate with the card. I had no idea that we use GPshell for that. So, basically if there's another way that supports APDU to and from the card that works for linux (I think that PC/SC takes care of the APDU) that would do the trick and I guess that what I do Id of GPshell under Windows, could do with this other way on Linux.
  
  Help, please.
  Very much appreciated.
  Thank you very much in advance.
  
  See you soon

  Hello

  First of all, your host application must be able to load and install the cmdlets, or do you just need to communicate with a card that has your preloaded applet? The answer to this will help determine what you need on your Linux machine.

  If you do not need to load the applet, you can use pcsc - lite (it's the port of PC/SC for Linux/Unix http://www.linuxnet.com/middle.html). This can be included in your distribution or you can easily compile from source. GPShell uses the GlobalPlatrform library that uses a PC/SC to communicate with your card. If you are not loading of applets, then you can skip the wrappers and use PC/SC directly.

  You were correct in your original hypothesis. When you have a connection to the card, you simply send APDU. There are a number of ways to do this, but they all eventually go through PC/SC. Most are simply a wrapper that makes things more convenient (smartcardio) while others are just a language Binder or wrapper (jpcsc). You don't need to use GPShell once you have an applet on your map. This is mainly used for creating scripts to load and sometimes to personalize a card. I wouldn't use this for most of this. Because it looks like an embedded Linux platform, you should keep your host as light weight as possible and go directly with PC/SC.

  You could start working on your application host using PC/SC and may compile it for windows and linux. You can watch the GlobalPlatform source to see how they did it (it is compilable for both and I've also compiled for OS X). The only real problem of memory is the include for pcsc headers path.

  See you soon,.
  Shane

• Upgrade to WM 6 Pro but which? Need your help and advice

  Nice day!

  I recently bought a Treo 750 here in Taiwan and I want to update my device from WMPro 5 WMPro 6... I've seen 2 different updates both of palm support

  .

  This link, I got a palm Online Chinese community. This update is for version 2.23 and labelled as English generic.

  https://ws.Palm.com/SupportDownload/app?service=external/home&SP=20

  This link that I got from Philippine Palm and this update is for version 2.27 labeled as English generic for http://www.palm.com/ph/support/treo750/downloads/wm6update.html of the APAC region

  Device String Download the file Treo 750 Treo 750-1, 16 - RWE download

  Should which file I download? I think the download the latter since it is much higher compared to the previous version... Hope to hear from you guys soon thank you very much!

  hyuuga_patik

  It's the version appropriate for your device
  http://www.Palm.com/ph/support/TREO750/downloads/wm6update.html

  Download this one and install it and let me know if it gives you problems... If you notice he's talking down to halfway the software channel page should be Treo 750 - 1, 16 - RWE, which is what you have... of the Chinese view maybe the Chinese version if your device is an English unit that you want to make sure that you have the English version of the update.

  Message relates to: Centro (Sprint)

• 11g: bounded task flows, need help and advice!

  I have a few questions about the stubborn workflow.
  
  The use case is the following: my module has a list of tasks on top, lower than I want to display detailed information. Say, visitors in the workist, arrested in detail. User can press a button "Edit" in detail, navigate to an edit page in detail, where the user can change the selected command. After submission, it is up to the list of commands in detail.
  So, I thought for this display order and the modification of a workflow defined with page fragments in a region. It is the correct use in this situation, isn't it!
  
  When the user selects a new customer in the list of tasks, I want that the workflow bounded at zero and start to re - run the default activity.
  So, the user begins editing a client A command, reflection decides against publishing then just selects another customer in the list of tasks. I then want the flow of sub to restart.
  
  Then I thought about: main workflow (containing the task list) called the void stream (content area) when the user selects from the list of tasks. Main flow the customer id in the void stream. The default activity of flow void is a call to the 'executeWithParams' method that then passes the activity stream viewOrders that displays the orders as a fragment of page table. What is the right way to go here?
  
  But I can't make it work.
  
  In my main stream (unlimited), I try to add a call of task flow, passing the customer of a link id in the void stream (stubborn). But JDev tells me I can't do it ("... can't call bounded task flows 'side flow' which refers to fragments of page" ").
  
  So, what should I do? Is my basic design (main flow, under flow, in a region) sound?
  
  Sascha

  Hello

  The use case is the following: my module has a list of tasks on top, lower than I want to display detailed information. Say, visitors in the workist, arrested in detail. User can press a button "Edit" in detail, navigate to an edit page in detail, where the user can change the selected command. After submission, it is up to the list of commands in detail.
  So, I thought for this display order and the modification of a workflow defined with page fragments in a region. It is the correct use in this situation, isn't it!

  Of course you can use a taskflow bounded with pages and opens dialog, if the edit page command ecr order then you can use a train. on the second page of train, you can add your items.
  You can use shared datacontrol or isolated, with isolated, he must use input parameters but then you can re - use order edit taskflow in other applications
  or you can use a page fragment corresponding to the order selected in a layout of the edit form.

  But you must use events. When changes in main taskflows, must pass an event to the homepage. the homepage listen for this event and triggers the other taskflows.

  Please read this http://technology.amis.nl/blog/3365/adf-11g-how-events-in-one-region-cause-other-regions-to-refresh

  Thanks Edwin

• Vista Premium home help and support missing by mistake reviews. How can I get that back

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Download the file here:

  Windows Help program (WinHlp32.exe) for Windows Vista

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5143

• "Help and support" no longer works for Windows 7 reviews

  "Help and support" on my Windows 7 does more for me as a user. It worked well for years and still works if I log in as an administrator. As long as user, I get the "help and support" and then search engine whatever it either in the search box returns with '0 results for the WORD '. For example if I am looking for the word 'file', he returns with "0 results for file .

  How can this be repaired? I really liked being able to use the search of Win 7 "help and support" feature thank you.

  If you mean that you see something like this:

  

  Search Google says to disable this check box under Options, settings:

  

  Results:

  

• How to convert pictures from iPhoto?  I need general info and advice.  My library is huge (95 GB).  I am running OSX El Capitan 10.11.6 on iMac.

  How to convert pictures from iPhoto?  I need general info and advice.  I saw the help info but I am very nervous to take on this project, as my library is huge (95GB), organized in several events and albums.  My library is saved (Time Machine SimpleSave HD).  I am running OSX El Capitan 10.11.6 on iMac.

  Have you seen this document?   Updated Photos for OS X - Apple iPhoto support

  https://support.Apple.com/en-GB/HT204655

  Is your iPhoto Library Library on your system drive in the pictures folder? And you have a lot of free space on your system drive? The migration will need additional temporary storage.

  Then drag the iPhoto library icon pictures open to create a new library of Photos of her.

  Your albums appear unchanged in the Photos.  Events will appear as additional albums, because the pictures has no events.  See this link: How Photos handles content and metadata for iPhoto and Aperture - Apple Support

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Help and support section is not up-to-date.

  I get a pop window indicating that the content of windows help and support section is not up-to-date. Its tells me there is a more recent version of the help and support section, but it do not offer to fix it for me.

  Hello

  Have you done a recent software or hardware changes to the system?

  You can review the article and check if that helps:

  I can't open the help that was created in Windows Help format (WinHlp32.exe)