Revo RL70 Media Center Tuner card detection problem
Brand new RL70, Win7, AVerMedia A373 minicards Dual DVB - T seems to be installed correctly, indicated in the device with the latest drivers Manager. When you configure the TV Signal in Media Center, no signal TV or channels are. Manual setting indicates tuners exist, but no TV signal. Detecting TV signals takes more than an hour, as channel scan.
Am using the existing TV equipment (antenna, cable, etc.) which is proven to work. Any ideas?
As I was at a loss, and a solution was not forthcoming, in desperation a tried upgrading to Windows 8. Success!
I assume that the installation of Windows 8 and Windows Media Center has replaced an original image from Windows "corrupt."
So not really a solution, but problem solved. Only problem is now the remote does not work with widows 8! I see another thread on this point, so a common problem.
Tags: Acer
Similar Questions
-
can you tell me where my card tuner for Media center on my computer
Practical Hi, Jeanette
TV tuners are of two types of basic model: external TV tuners, which usually plug into a USB port on your computer and the internal TV tuner cards, you must install inside your computer.
For more information on TV tuner cards, please see the link below:
TV on your computer: understanding signals TV and TV tuners
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows media center tuner works well, but won't display (screen black & no audio) of television programs.
He has no problem display of a recorded program but will not display the digital direct terestrial TV program.
The problem sometimes disappears and then returns, for example - this morning, after 30 minutes of game time!
Hi Daniel,.
Update your graphics card, but also the TV tuner card drivers. Uninstall and reinstall the graphics driver. Once done, reconfigure Windows Media Center.
Method 1: Try to update to the latest graphics card drivers on the manufacturer's Web site.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 2: Uninstall and reinstall the driver for the graphics card from Device Manager:
Open the Device Manager
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
Visit the manufacturer's Web site to download and install the latest graphics driver. Once done reconfigures WMC.
Method 3: See the article provided below and check if help.
Set up a TV signal in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-cent
Method 4: Uninstall and reinstall the Windows Media Center:
Stage i: uninstall Windows Media Center:
a. go to start and in the search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find multimedia and uncheck the brand in the face of Windows Media Center.
d. restart the computerStage II: Reinstall the Windows Media Center:
a. go to start and in the search type 'Turn Windows has or not'.
b. click on "Turn Windows features on or off".
c. find the multimedia functions and place a check mark in front of Windows Media Center.
d. restart the computer.Let us know if you have other questions about Windows in the future.
-
Windows Media Center does not detect my TV tuner card
Hi a few years back, I built a Media center PC Windows Vista worked great! incredible experience recently (2 months ago) I formatted the PC and reinstalled Windows Vista now Media center options have changed and my Tuner card is not be detected BUT if I use the software the camer card it works fine I ca watching TV and recording with no problems
I've uninstalled and reinstalled the drivers twice and today I removed the card and inserted into a PCI slot new nope still does not (sigh)
PC is a core 2 duo with 2 GB ram Intel MOBO ATI 3600 seris of graphic card tuner Kworld is
I'm suspect that Microsoft updated Media center to stop my card work! or is it because I'm at the Canada and rules are different here and that's why multimedia does not work?
Hmmmmmm
appericate any help or advice thanks in advance
-Derrick
It seems that the tuner is no longer supported by MS, but thanks for the answer Vijay
-
64-bit Windows 7 Media Center does not detect not tv tuner
Hello
Windows Media Center is not able to detect my usb hybrid tv tuner in trying to set up live TV. When you try to solve any problems are detected, I downloaded the latest drivers and install and the device is listed as working properly in Device Manager.It is a kworld atsc usb hybrid tv stick ub445-uI am at a loss on what to do because there are several product reviews that say the tv tuner works very well with windows 7 with no hiccups...Any help or steps would be appreciated!UpdateEverything uninstalled and reinstalled media library but her has not helped eitherKWorld hybrid TV Stick UB445-U USB 2.0 is a Windows 7 Media Center compatible tv tuner card, and there is no need to install any third-party application.
You can create a different user account with admin rights to check the issue.
-
Media Center does not detect not tv tuner
Hello!
I use Vista Home Premium. My Media center says that there is no Tv tuner. In fact, I have two Philips and Pinnacle tv tuners. Device Manager indicates that both are with upto date drivers and working properly. How to solve it?Hi components,
Welcome to Microsoft Vista answers Forum!
I would like to ask you a few questions in order to get a better understanding of this issue.
· How long have you had this problem?
· It worked before?
· Did you the latest changes on the computer?
I have a few here that might solve the problem.
A.) first of all, this could be the problem with the drivers, you may need to update the drivers for the TV tuner card, follow the steps below to update the drivers:
(i.) click Start > type in Device Manager in the start search > expand the device in Device Manager > right click on the device > click on the driver tab > click on update drivers > click OK.
(B) now the computer restarts and check if you are able to use media center, if the problem persists, I suggest you uninstall drivers and reinstall again.
II.) click Start > type in Device Manager in the start search > expand the device in Device Manager > right click on the device > click on the driver tab > click Uninstall drivers > click OK.
Now reboot the computer that will automatically install the necessary drivers for the TV tuner card.
You can see the links below for more information:
Check if the TV tuner cards are compatible with the Media center: http://www.microsoft.com/windows/compatibility/Browse.aspx?type=Hardware&category=TV%20Devices&subcategory=TV%20Tuners
What should I know before adding TV tuners to use with Windows Media Center? : http://windowshelp.microsoft.com/Windows/en-US/Help/cf0b2d02-c3df-4369-8fed-ce71398cd11f1033.mspx
Get help for your TV tuner card: http://windowshelp.microsoft.com/Windows/en-US/Help/d7ef383d-3342-4c8b-b1ce-5ca64891bc381033.mspx
Demo: set up a TV tuner and a digital video recorder with Windows Media Center: http://windowshelp.microsoft.com/Windows/en-US/Help/d0513525-0ada-4814-87bb-8cf2307038701033.mspx
TV on your computer: understanding and TV tuners TV signals: http://windowshelp.microsoft.com/Windows/en-US/Help/aa79e7b4-e423-4459-ad22-1c240a8ffcd51033.mspx
Hope this information is useful.
Let me know if it worked.
All the best!Thank you, and in what concerns:
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Media Center Video card not detected error
Media Library on my s3580a Slimline has suddenly stopped working. Error bed undetected graphics card. I followed the instructions to fix on the HP page. Hardware diagnostics shows no problem with the card. Changed service Media Center receive and rebooted as suggested. Have removed and reinstalled the PCI card. Used Recovery Manager to recover an hour before the error. PC was not connected to the network, so no update driver has occurred. Searched drivers updated in any case but none are available and existing HP driver refused to load because it is the same version. Can someone please?
Crow, here's the latest nvidia driver for your video card. Once you install it, let us know if it works. If this isn't the case, we will return to the drawing board until what we solve your problem.
-
HP slimline s3120n-Windows Media Center - Tuner not installed error
Media Center does not. Tuner not installed message! Help!
I have a hp slimline s3120n. I got probably around January. Ive been watching TV on it with a card of A 48, 3 ViXS Pure TV - U. recently, then do not install anything I turned it on and got an error from the center of media saying "Tuner not installed" I tried all the things on the hp support Web site
http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01187871&lang=enI have also a windows server backup from my computer. I restored my computer to a point where the computer work and it didn't work. I looked everywhere on the internet and you can find a lot of people with the same problems, but not answers
my card is displayed as working on Device Manager too so it must be a software problem.
im running windows vista 32 bit
I have tried reinstalling drivers did not work, tried to remove the map and back does not workI have HP slimline is now Windows 7 and Vista. When I upgraded to Windows 7, I did not go off Homegroup. My Vixs tuner worked fine for 2 years. Recently, may 2011, I decided to start the homegroup; What a mistake!
My Media Center said that I had no TV tuner.After much research, I found this solution.In windows 7 go to "Administrative Tools" and launch 'Services '.Scroll down to "Windows Media Center Receiver Service" and under "connect as" column, make sure that setting is 'Local System' and not 'Network Service '. The "Startup Type" value in the manual. not automatic.This fixed my issue. -
Why windows Media Center does not detect all channels digital antenna television
Detects only 2.1, 11.1, 13.1 ect willnot detect 2.3, 13.2, 14.4 etc..
HelloI suggest to add the missing digital TV station, to do this, follow these steps:In windows media Centera. on the start screen, access tasks, click settings, click TV, click Guide, and then strings missing Add.b. click Add a digital TV channel.c. type the name of the missing channel, and then click Next.d. Enter the number of the missing channel, and then click Next.e. If you are prompted, type the physical number of the missing channel, and then click Add.f. click done.See the link below for more informationSet up the Guide listings for use in Windows Media Center
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-CenterInformation with dubbing
TV signals that are supported by Windows Media Center: http://windows.microsoft.com/en-us/windows-vista/TV-signals-that-are-supported-by-Windows-Media-Center
Set up a TV signal in Windows Media Center: http://windows.microsoft.com/en-us/windows-vista/Set-up-a-TV-signal-in-Windows-Media-Center
TV on your computer: understanding and TV tuners TV signals: http://windows.microsoft.com/en-us/windows-vista/TV-on-your-computer-Understanding-TV-signals-and-TV-tunersAziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Hello
What is the TV tuner and FM Radio tuner? Is it a software or a difficult, how to install them on the computer? I can buy from a retailer. How will I know which is for my pc.
Please help me to answer the question.
Respectfully,.
Solvemachine
Hello
Thanks for posting the question in the Microsoft Community forums.
According to the description, you need to know more about the Tv tuner and tuner Radio (FM) for Windows Media Center.
To listen to the FM radio in Media Center, you will need a tuner FM connected to or installed on your computer and an antenna connected to the tuner to receive a signal. FM tuners are very similar to TV tuners in fact, many TV tuner cards have a built in FM tuner.
Reference:
Listen to radio in Windows Media Center
http://Windows.Microsoft.com/en-in/Windows7/listen-to-radio-in-Windows-Media-Center
See also for more information about the options of TV in Windows Media Center.
Windows Media Center
http://Windows.Microsoft.com/en-in/Windows/Media-Center-help#Media-Center-help=Windows-7&V2H=win7tab2&V3H=winvistatab1Hope this information helps. Please reply with the status so that we can help you. -
Media center guide ads download problem
My media center 2005 with Rollup 2 installed, will not update my guide channel registrations beyond this Sunday afternoon (14/08/11) download? I went to windows update. Nothing to update. Help!
Hi Artemis42,
I would say looking at the troubleshooting in this thread and see if it helps solve your problem:Also: -
Windows media center xbox 360 connection problem
Hi, this is the message shown on the screen:
"Connection completed. The xbox 360 has been disconnected because and request launched unexpectedly UI. You want to reconnect? »
This occurs when WMC tries to connect with the Extender Setup. I followed all the steps to configure the Extender according to the microsoft Web site. But something does not work. HELP Please!
Hi Riclop,
Thanks for posting on answers.com.
First, disable the program anti-virus or firewall that runs on your computer and check if the problem persists.
Note: because some anti-virus software will cause conflicts between unexpected applications, please temporarily disable any antivirus, firewall or anti-spam on your computer programs.
This problem occurs if the floating language bar is enabled on the Windows Vista-based Media Center computer. This configuration closes the connection between the Media Center Extender and the Media Center PC.
To resolve this problem, change the settings of the Media Center Extender language bar. To do this, follow these steps.
Step 1: Configuring settings on the Windows Vista - based Media Center computer
- Click Start , type intl.cpl in the Start Search box and press ENTER.
- On the keyboards and languages tab, click Change keyboards.
- On the Language bar tab, click docked in the taskbar under options from the language bar.
- Click OK.
- On the administration tab, click copy to reserved accounts.If you are prompted for an administrator password or for confirmation, type the password, or click continue.
- Click on the checkbox by default (new users) user account , and then click OK twice.
- Click Startand then click Windows Media Center.
- Click tasks, and then click settings.
- Click Extender, and then on the Xbox 360.
- Click Uninstall, and then close Windows Media Center.
Step 2: Configuring the settings of the Xbox 360 console
- In the System of the Xbox interface section, select computers.
- Select Windows Media Center, and then press the A button.
- Select Disconnect.
- Press the B button repeatedly until you return to the System section.
- In the media of the Xbox interface section, select Media Center.
- Advance in the instructions on the screen to get the 8-digit setup key.
- Note the setup button.
Step 3: Configuring the settings on the Windows Vista - based Media Center computer
- Click Start and then click Windows Media Center.
- Click tasks, and then click add extender.
- Click Nextand enter the 8-digit setup key you obtained media of the Xbox interface section.
- Follow the prompts to complete setup of Windows Media Extender.
When you copy these settings for reserve accounts in the 1st step, you change the settings of language bar for all new users that are created on the Media Center computer. After you add the Windows Media Extender, you can reverse these changes so that all new users will have a floating language bar. To do this, follow these steps on the Windows Vista-based Media Center computer:
- Click Start , type intl.cpl in the Start Search box and press ENTER.
- On the keyboards and languages tab, click Change keyboards.
- On the Language bar tab, click floating on the desktop under the language bar options.
- Click OK.
- On the administration tab, click copy to reserved accounts.
If you are prompted for an administrator password or for confirmation, type the password, or click continue.
- Click on the checkbox by default (new users) user account , and then click OK twice.
You can go through the article below:
http://support.Microsoft.com/kb/934542Kind regards
Technical support of Microsoft-yama.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: Netflix in windows media center, connection problems
I saw disorder connect to Netflix on windows media center. I am running windows vista x 64. When I select the icon of the login screen appears, but when I try to connect it comes up with the error message "there was a problem of signing. Make sure your internet connection is working and try again. "my internet connection is fine and I can connect to http://www.Netflix.com/, so this problem should make windows media center, but I can't understand it. I have updated windows and windows media center and I'm still having this problem. Thanks in advance for any advice.
The most likely explanation is NetFlix changed something in their routine of authentication (i.e. SOAP structure or just a URL string, whatever) and who broke the Vista NetFlix WMC client. It did not affect the web interface of NetFlix because operated a NetFlix service, they were obviously aware of the change pending and adjusted their web client to use the new method.
Customer WMC NetFlix in Windows 7 (which is a new product), was probably already coded to use the new method. The client in Vista has continued to work with the old method, until NetFlix finally stop this method. Microsoft, slow to react and to assign developers to fix the Vista NetFlix WMC client missed the deadline and Vista users have been in the dark for a while.
That's pretty standard for web services that cross corporate barriers. Particularly involving slow mega-body like Microsoft. A company change a routine and the other has to play catch-up. Communication is often difficult between the divisions within a company, between companies, it is often non-existent.
The level of prissy whining in this thread was good for a laugh however. Those threatening to cancel NetFlix: rolleyes: your access was still working on their Web site. You were not without service, just, without the convenience of WMC. People grumble at Microsoft... anyone know if Microsoft was still knowledgeable of * when * NetFlix was going to turn off the old authentication? If they were told the night before (or any) "Hey let's turn off the old authentication routine" what kind of response do you expect? How long is it since the problem began, 28 days? It's actually a pretty fast for an element relatively low priority. Or it could just be that NetFlix reactivated their old methods of authentication as a temporary solution to this problem (they share a part in creation) until Microsoft can respond formally with an update.
Now if Microsoft was duly informed advanced evolution of the service, still dragged feet (quite possible) I don't give them no slack. But at the end of the day, it is always a matter of low priority. It's fixed now, be happy until the next time that Netflix change their authentication routine.
-
Original title: why is Netflix in Windows Media Center does not connect to the internet?
I watched movies on Netflix via Media Center before and I've never had any problems. However, I did use the Netflix on Media Center app for a while. Whenever I try to open Netflix in Media Center the bed error statement there was a signature issue. Check the works of your internet connection and try again. This product even when I'm connected to the internet, can surf the web, download music on iTunes, etc. What is happening and how to fix it?
Tried to access Netflix today and I found to work again on my Vista 64 Media Center. Anyone who is on this thread should see if them is work and response back.
Gavin -
My 'Windows Media Center' does not detect the signal Uverse
After my reading a previous post, I tried manually configuring in antenna / analog and all I get is static. It seems that I am unable to go back and try again.
How you set up Uverse to 720 Lenovo? I ran it through HDMI but want to run via the Media Center.Hello
Thank you for the question to Microsoft Community. I'll give my best to help you.
What is the accurate and complete error message you get?
I suggest you try the following steps:
a. open Windows Media Center.
b. click 'Continue' on the Media Center configuration page, then choose "Custom".
c. Select "System requirements" and Windows Media Center will check your connection network and U-Verse. Click on 'Next' to continue the installation and access to optional "Installation."
d. Select "Set Up My media centers" on the optional configuration screen. Click "next".
e. add multimedia files to Windows Media Center. Select one or all the following folder options: music, photos, videos, recorded TV or movies, and then click "next".
f. Select "Add files to library" and click "next". Choose the folders you want to add to Windows Media Center. Click "Finish" when you are finished adding content.
Maybe you are looking for
-
Where can I find a version of Firefox to download for Solaris 10?
It doesn't seem to be a version of Firefox for Solaris 10. If there is, where is the link where I can download it?
-
I ran a program and he pointed out that I had no 3D graphics features. I checked the specifications of the computer and it shows that NVIDIA NVS 4200 M 1 GB should be incoluded. i5 - 2540M (2.6GHz), 4 GB of RAM, HD 250 GB at 7200 RPM, 15.6 LCD at 192
-
custom component buffers corrupt
Hi, when I try and create a custom through part of hole in ultiboard, created tampons have 2 interiors - in all ready components created by holes just up and down - I do not know what are these interiors. I use the wizard of the part which seems to w
-
I have already installed the Microsoft 'Fix It' to play videosand breaks down twice already and he did nothing for the problem. I triedto download the upgrade Flash player three times and nothing happened. Hewould not download on my computer at all
-
Windows Movie Maker-how can I change the file format?
It's my first time using Movie Maker, and I edited a song from my iTunes library. I want to save it in mp3 format, but when I saved it, it wouldn't let me choose the file format. I went to the post, and he published automatically as a video. I just w