RGB and RGB secure Web
Hello
I would like to know what it takes as UTI, RGB or web safe RGB Interest the creation of ' web the elements.»
And what is the reason for these two references.
Thank you
RGB for the Web are outdated and comes from the days where monitors cannot display more than 256 colors.
Now that the production supports millions of colors, there is no reason to use the colors of web security.
Make sure that your RGB colorsettings are set to sRGB, since that is the norm on the web.
Tags: Illustrator
Similar Questions
-
When I connect to secure Web sites (that is to say the National Bank aust) a message pops up saying not approved Web site and the security certificate is not valid? I can also book flights on qantas and Virgin site? Help, please. I could do all this 24 hours but now can not do something like this.
Try to upgrade to a newer version of Firefox 3.6.x or 6.0.x.
Your current version of Firefox 3.0.19 can exceeded SSL certificate expired.
Also check the date and time of the clock on your computer: (double) click on the clock icon in the Windows taskbar.- Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
-
I recently upgraded to Firefox 5.0.1 and now the 'lock' icon is nowhere (I don't know) when you access secure Web sites. I've not seen once. It appeared in the lower right of the screen. I also have Norton Internet Security.
Well, in the secure Web sites part of the address bar is allocated to the part of the security certificate. For example, here in these forums you can see your address bar is as follows: mozilla.com . https://support.mozilla.com... The front ' |' ("mozilla.com") is what I'm talking about. For more information on the security certificate, you can mouse over and also clicking on it.
Press "Resolved" If this has helped you.
-
Before the new update for Firefox 50.0 these pages loading very well and are secure sites. Since then, Firefox is saying that they are not secure and therefore not loading not them. Some would explain by saying that maybe it is your internet connection or system, but I use this same pc and internet without any problem.
Please try to reinstall your bullguard security product, while firefox is closed either contacting their support to find out how you can get it to add the certificate that it uses to intercept connections secured in the trust firefox again store...
-
Firefox does not trust, a specific secure Web site I know is safe, but there is no trust other Web sites secure. In addition, Internet Explorer trusted this website and Firefox on another computer trusts of the same site. When I try to connect Firefox tells me it doesn't have a valid certificate (even though I know there is one) and I have to make an exception for you connect. Is it possible that I can fix this and get the appropriate in this particular program of Firefox certificate?
Be sure to select "All Files" and not "text files" type when you save the file in Notepad (text files add a hidden .txt file extension).
-
Question about windows theme and display of Web pages
I have everything, I'm new here, I've had my laptop for about 8 months, but it was stored for the 6 months, so he had only 3 months of use, and that was 99% for watching movies as was my laptop backup (my girlfriends, which was never used)...
Well I just got my laptop storage and started using it again as I want now to do that my main work computer, it's a Satellite A100 Series. Running Win XP Pro SP2. Well, now I used it for about 1 week now and this is a fantastic computer, expecially the swipe away feature, I'm usually one XP Home Edition, but I do with Pro, just did not have any experience with it...Now, here's the problem, and this has always been the problem since bought, when we first bought it and connected to the internet with IE7 fonts have been massive, I figured out how to fix this in the display after a few hours to play settings and also noticed Web pages if there is a background image, it does not appear... (I also found this week is the same for any application on the PC that uses a Web page as Set up, or something, just sectain things... as I open the Security Center in the control panel and everything is white, and background images aren't there (which is white) and even corners which are background pictures are not displayed and comparing to) my other computer, there should be a green and red, background color etc.
With Windows Media Player buttons should be as purple and black in WMP11, and they like a white background style html on buttons with links to them at the top and playback, stop, etc buttons have a back outside and the inside is white...Basically what I'm saying, is that she appears not CSS style WC3 content on some pages and applications on the laptop, and with regard to Web pages that they are exactly the same, I tried IE7, FireFox, front Browser, and still, the only one that displays pages almost as it should is Opera 9.2, but I really need to solve this problem... it is something simple to do with display obioussly , or settings, but I have tried literally every single different way of doing things last week, tried everything in the Control Panel, all toools Toshiba and no results.
I'm not a beginner, or whatever it is, I can't get this problem, I can't even think of a setting that would do this let alone in trying to resolve this... I have all the Windows updates (although as I said, he did this from the first day of purchase)...
If I could post a screenhot here I could show you... what Web pages look like in IE7 and FireFox and before (the only difference is Internet Explorer pages is mostly gray and firefox is white, gray is also.)
Another question, when I was messing with the settings in the Control Panel, under Performace I changed it to something like 'make optimal display for performace' rather than 'Best to display' and it is then my control panel simple with a white background, and everything is not how I'm used, even the categories are made for each section , they are just all grouped together here, and my house Windows on my other laptop is positioned like this, but it at least has a sidebar on the left with a button to change it back...
now I am at a loss to find the Performace button, as it is there is more, and I want to change it to 'show better for display' not the persomance... so if someone knows how to do this, please let me know... I took a screenshot of my control panel... and it's not naked, I use the Zune Windows (the black buttons and backgrounds theme ), so he used to be a gray background with a status bar on the side with all the links and details dark just like folders etc... So yes, it is another thing that I want to fix.Also I do not have the CD to fix it, not more that I think that she needs, but I have a standard out of the box disk Win Xp Pro, I was seriusosly do a fresh install, but I know I'll lose all modules of toshiba and all the extras that it is came up with, that's the only reason for which I don't have as it has Protector Suite QL, that I would have to pay to settle down to do a cleanup, and I really want to do because there is obviously something missing, its as simple as that, there is nothing wrong with the system it is just not set up correctly.
Here are some screenshots of how I see Web pages, my Security Center Page and my control panel because I messed up he do "Get the best performace of" upward and the screen turned to the basic white and half things in the control panel is now missing, it has been setup in the previous categories... ahhhhh When I try to solve the original problem, I've done another...
http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_01-1.jpg
{It is the Security Center screen when I click in the Panel, that was before I did it fade)
http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_02Sep3021.54.jpg
("it's now my control panel once I went in ' Premformance and display ' (I think. it was certainly performace in the name of the category)... and I changed a parameter of performance and display which actually use less resources... now I can't change it back, as the button performace is no more :())
Thanks for reading and I hope although there, can anyone help me cos I hate having to do a fresh install on something as small as this, it is not many programs Add on on my laptop, as I said, it has probably beeen used 20 times ever, and especially for watching movies up to 1 week where it sat in storage for 6 months ago ,,
Any help would be greatly appreciated... I tried all the Options of the Internet, all the Display Options, all variants, I need something specific, it is not only perform the internet, but the global programs with html style links, etc. and certainly CSS style sheets and the background image in the HTML feature.
Thanks in advance.
Hi Jay
Very impressive display! I can see after 4 days, nobody wrote anything to give you the solution for your problem. I read your announcement with a lot of attention and I have to say that it was not easy to figure out your problem exactly (perhaps because English is not my native language).
I know very well that new OS install is radical and last solution but I recommend you to check some forums Microsoft WXP because issue described is, in my opinion, more for OS forums for Toshiba forum.
If you display the same thing in forum Microsoft please post the link, and we can follow the discussion here.
I wish you good luck and I hope you will find answers soon.
-
uninstall the KB955759 and KB972270 security updates in xp
automatic updates from 19/01/10 made my almost powerless browsers especially firefox. These two [955759 KB and KB972270] security updates have been installed in the afternoon, and I have since been in pc _. I can't do a restore.
Is there a method to cancel any security settings has occurred with this update of XP Home?See the section "How to get help", for example, http://support.microsoft.com/kb/972270
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Or you can...
Launch a collateral request for assistance free Windows Update:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527Security customer includes home links page free security update support, too
https://consumersecuritysupport.Microsoft.com/For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I turned on my laptop and my security shield means I have viruses and tries to get me to buy security. I already had my own... or AVG. Why this cease to arise? I would like to know how to safely uninstall this.
Hello
Thugs loading as usual but then programs are supported by the system functions that make the machine
harder to use - even if you pay or not. Although these are certainly malware that they are not a
virus - more like a Trojan horse and certainly a nuisance.---------------------
These are scams, fake antivirus to force you to pay for it, even if they have no advantage at all.
If one of them is not correct (or those listed in the same guide) Please give us the
Web site, to which you are headed and any other relevant information, including exactly the name you
See about the program.Remove my security y Shield (uninstall Guide)<-- read="">
http://www.bleepingcomputer.com/virus-removal/remove-my-security-shieldRemove my security wall (uninstall Guide)<-- read="">
http://www.bleepingcomputer.com/virus-removal/remove-my-security-wallRemove my security engine (uninstall Guide)<-- read="">
http://www.bleepingcomputer.com/virus-removal/remove-my-security-engineDownload malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en-----------------------------
also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Try the demo version of Hitman Pro:Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------
Also do to the General corruption of cleaning.
For Vista:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------------------
For Windows 7:
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
l download Microsoft Security Essentials for my windows 7 but later unintentionally downloaded McAfee Security scan plus.
is there a conflict? should I just uninstall it, therefore less heavy for my pc?Thanks in advanceDon't know why this link does not work... McAfee must have fired or their FAQ is under review.
The Development should work... and you can uninstall/remove the application after that you are through using it.
Here are a few suggestions of Stephen Boots, moderator of the MSE Forum about fake antivirus programs and prevention measures General malware:
Unfortunately, this type of malware attacks are difficult to follow because they fool you by letting them install. They usually come to an infected web site and usually an advertisement. You get a pop up of infection and click on it to close the window pop up that allows you to install infection. They can also be provided in a "drive-by" mode without any action required by the user due to the system being unpatched, any security software is running.
When you encounter one of these fake virus pop - up during navigation, immediately do the following:
-Do not touch any window of browser to close or navigate away.
-Immediately, press Ctrl-Shift-Esc and bring up the Task Manager and end by force all instances of iexplore.exe, if you use Internet Explorer, or the executable for the browser you are using.
-or-
-Go to start/stop and reboot the PC without touching the browser windows.
-If you used the Task Manager to close the browser instances, restart the machine.
-Then go in the Internet/Panel control Options and delete all temporary Internet files and cookies. If you use another browser, open the browser settings to do the same - to delete the local cached files and cookies.
-Perform a full scan with your anti-malware program.The steps above should prevent infection taking root.
In addition to using an anti-malware program, the following recommendations will help to protect the PC from infection:
S ' ensure that the Windows Firewall is enabled.
S ' ensure that all critical updates or important, including service packs for the operating system and programs are installed from Microsoft Update (Windows Update).
-Make sure that Internet Explorer is version 8 or higher and put up-to-date with all the patches.
-In Internet Explorer 8 or 9, use the SmartScreen filter.
-Make sure that the Internet IE security settings are at least put to fire medium-high (default).
-Turn on the pop-up blocker in Internet Explorer.
-On Vista and Windows 7 make sure that thatUser Account Control (UAC) and doesn't work with elevated privileges.
-Make sure that automatic updates of Windows are set to notify at least, but the preferred setting is to download and install automatically. If you update manually, be sure to update as soon as possible after being informed of updates available.
-Make sure that installed applications, including Adobe Acrobat, Adobe Flash and Java are at their latest versions. Many vendors are regularly updated and fixes security vulnerabilities.
-Never click through links from unknown sources and be careful, even if they are from a "reliable".
-Do not open attachments in unsolicited e-mail.
Good luck...
-
How do RV082 access secure web sites load balanced mode
I just bought a gateway/router RV082 Dual WAN because I have both cable and DSL feeds in my office. Everything works fine until I try to access a secure web site or have a conversation through my Vonage internet phone. In failover mode all works. As soon as I select Load Balancing, I have outages. I do not see this listed anywhere as a 'problem' so there must be some kind of workaround if this isn't a bug. Has anyone else seen this and how did you resolve teas?
Thank you
Poul
^.. ^
The problem you are having is your doing load balancing and traffic to the secure Web site is to get out the two wan. The secure site is waiting for a response from the original wan ip, which has established the connection, and then it receives the response from the other wan ip address. It is a common problem. You can do protocol binding tab management system and have everything that your https traffic out a single IP wan, this will fix this issue.
-
When I connect to the internet, servads pop up. I ran malwarebytes anti malwalre and microsoft security analysis. Not found the problem of servads in their analyses. How can I get rid of the servads.
Hello
1. what web browser do you use?
2 have had any changes made to the computer before the show?
If you use Internet Explorer, please follow the methods.
Method 1:
If you see pop-ups suspicious, bars unwanted tools, redirects, strange results or other unexpected behavior on your computer, you may have been deceived by installing malicious software (also known as 'malware') on your computer. This behavior is known as the browser hijacking.
To correct your hijacked browser I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:
http://www.Microsoft.com/security/spyware/browserhijacking.aspx
Method 2:
Step 1:
Start the computer in safe mode with network and perform antivirus analysis.
See the link.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2:
Perform an online virus scan.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Method 3:
Follow the steps in the link.
Method 4:
optimize Internet Explorer and check.
NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
Received "a secure web site is unavailable" message during installation... what should I do?
I try to install on Windows 2008 Server as PUK Server Developer and Client. ... and on the page options web site, I get the following message:
"A secure web site is not available. A secure web site is strongly recommended to use web services, and do not use a secure web site can leave data vulnerable to access by unauthorized users. If you want to use a secure web site, please consult the documentation and create secure manually web site... »
No advice or how to manually create the website security?
Thank you
Pat
Tom,
I thought about it... in the title of the Internet Service Manager, I have essentially created a self-signed certificate, created a SSL connection and then checked the SSL binding. Here is the link for more information: How to set SSL on IIS 7: official Microsoft IIS Site
I read the part where you can change protocols after installation so that was my last resort. in any case, thanks for the reply and your help... much appreciated.
-Pat
-
Integration with the secure web service IS deployed on EBS
Hello experts,
I have a REST webservice deployed to an Instance of the EBS. I try to call the web service using a mobile application in the ADF. However, the web service is secure and requires security settings to be sent in the request header.
Anyone can recall or explain how I can add a custom header to the object of the application for the REST web service? Any help will be appreciated.
Thank you
Abhishek
Hi Abhishek,
You can do the following:
String theUsername = "abc";
String thePassword = "pass";
String userPassword = theUsername + ': ' + thePassword.
String encoding = new sun.misc.BASE64Encoder () .encode (userPassword.getBytes ());
restServiceAdapter.addRequestProperty ("Authorization", "Basic" + coding);
If you use Webservice DataControl, then automatically the connection information in the login form is injected into the webservice framework.
Kind regards
Deepak
-
Access a secure web service of ADF Mobile Application
Hello
We try to create an ADF Mobile application that uses a secure web service located in Oracle EBS (with SOA Suite).
We use JDeveloper 11 g 11.1.2.4.0
Initially, create usd a Control(SOAP/REST) Gallery Web Service data and provided the WSDL document. We tried to run on a simulator, but not did not do anything. We have also found a way to provide the user name and password. So we left it there.
Then we tried to create a Java desktop app to check if it was a problem with our server. In the desktop application, we created a "Web Service Client and Proxy" new gallery followed the steps and used oracle/wss_username_token_client_policy, added the code below to put the username and password and was able to call the service and retrieve data.
(reqContext.put (BindingProvider.USERNAME_PROPERTY, "DBAKER");
reqContext.put (BindingProvider.PASSWORD_PROPERTY, "xxxxx");
So we thought to return to the application the ADF Mobile and creating a "Web Service Client and Proxy" it, but when we built this project, we had the ' annotations are not supported in - source 1.4 "&" generics are not supported in - source 1.4 "errors and found that ADF Mobile does not support beyond Java 1.4" "» (Is that right?)
We then found the video "to access the secure Services of ADF Mobile Web" by Shay (https://www.youtube.com/watch?v=rk5om3o3Pas) and saw that he was using a login server.
We wanted to confirm if you use a login server is the right path to access a secure web service of an Oracle ADF Mobile application?
Are there other ways to do it?
If we need to create a login server, can provide you links that will put us on the right track in establishing a connection server that can connect to the EBS?
Thank you.
The URL must point to a protected page that prompts the user for basic authentication.
See an example here:
https://blogs.Oracle.com/Shay/entry/accessing_secure_web_services_from
As well as the blogs linked at the bottom of this entry.
-
ADF Mobile | using secure web services
Hi allI'm pretty new to ADF Mobile, I use JDev 11.1.2.4.
In my Mobile application I want to use the secure web service.
Here's what I do:
1. creation of a data control based on the WSDL binding.
2. get the web service methods in the data control.
3. during the race, I'm getting that error "oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client from server SOAP fault: Missing < wsse: Security > in the SOAP header.
When trying to run the WSDL binding in SOAP UI, I need set request username and passwordproperties, then only I will be able to invoke this web service.
Here, my question is where can I set these properties for the data control to the web service ?
Please suggest.
Thank you
Vieu
Hi Shay,
Thank you very much for the reply, I'm able to resolve the problem with the approach mentioned user guide.
I forgot to set it up for the first time: ADF Mobile allows you to specify a custom provider class in your
DataControls.dcxfile. This custom class extendsoracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider. You can use it to specify an implementation of theSoapHeader[] getAdditionalSoapHeaders()methodExample 9-1 shows how to extend the
SOAPProviderand create a custom header has shown in example 9-2package provider.ebs.soap;
Import oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider;
Import oracle.adfinternal.model.adapter.webservice.provider.soap.SoapHeader;
SerializableAttribute public class EBSSOAPProvider extends SOAPProvider {}
SoapHeader public getAdditionalSoapHeaders() {}]
SoapHeader header [] = SoapHeader News [2];
SoapHeader token = null;
SoapHeader user = null;
SoapHeader pass = null;
header [0] = new SoapHeader ("http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/",
"SOAHeader");
header [0] .addChild (new SoapHeader)
"http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"
"Responsibility."
'SYSTEM_ADMINISTRATOR'));
header [0] .addChild (new SoapHeader)
"http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"
"RespApplication,"
'SYSADMIN'));
header [0] .addChild (new SoapHeader)
"http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"
"SecurityGroup."
'STANDARD'));
header [0] .addChild (new SoapHeader)
"http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"
"NLSLanguage,"
'AMERICAN'));
header [0] .addChild (new SoapHeader)
"http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"
"Org_Id."
"0"));
header [1] = (new) SoapHeader
"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"
'Security');
Token = new (SoapHeader
"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"
"UsernameToken");
User = new (SoapHeader
"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"
"Username."
"sysadmin");
pass = new (SoapHeader
"http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"
"Password."
"sysadmin");
Header [1]. AddChild (Token);
token.addChild (user);
token.addChild (pass);
Returns the header;
}
}
Kind regards
Vieira
Maybe you are looking for
-
I use the last mac OS on a mac book pro and I installed FF19.0 now when I try to open a .jpg of my group on yahoo, he continues to ask me what program I want to use. I checked the block in order to always use an extract, but no matter what I always a
-
Project due to bad lack ejected the drive
I just changed a project when, for no reason at all, the hard drive, that I was working on disconnected itself. I left the PCF, reconnected the hard drive and reopened FCP. The project now looks like a clip without content, and I don't know what happ
-
If you update an IPhone and he asks the Apple ID and password, what are you doing?
I've just updated an Iphone 5s and it asks ID Apple and Apple ID password but the person doesn't know their information. What can I do?
-
How do you add the location of many photos at once?
How can I add the location (even) of many photos at the same time? For example, a visit to an amusement park where you took 100 pictures. My camera does not have a GPS feature, so how can I add this location even to all the photos without having to i
-
What is error code--c:\windows\ipajahoz.dll
I have a Dell with windows xp. What is error code--c:\WINDOWS\ipajahoz.dll?