uninstall the KB955759 and KB972270 security updates in xp

Similar Questions

• In Vista, try to install the KB971029 and KB2483185 security updates, get the 8007371C error code

  have not been able to download KB971029 and KB2483185 security updates... both have failed several times but some other updates are downloaded without problem

  * original title - can you not some of the updates to take... error code is 8007371 c. ETS some install and some rock and more *.

  Hello

  I think that your error code is missing a digit

  they are not normally 8-digit 7

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  I solved the problem, installed the installer from mode Windows safe.

• Update for Windows Vista (KB2505189), updated platform for Windows Vista (KB2117917) Supplement - french and a security update Cumulative for the ActiveX for Windows Vista (KB2508272) stop bits

  I have update for Windows Vista (KB2505189), platform update Supplement for Windows Vista (KB2117917) - french and Cumulative security update for ActiveX Killbits for Windows Vista (KB2508272). These updates get the 8007371B error code. I have Windows Vista 32-bit. I searched the Microsoft catalog available and tried a manual installation for these updates, but they have always failed. I have not yet tried to install it in safe mode. Is there anything else I can do to fix this?

  8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  One or more required members of the transaction are not present.

  Only the specific return code can be solved by running system, aka CheckSUR update readiness tool -.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  CheckSUR for taken over all the versions of basic x 86 (32 bit) Windows Vista

  When you are prompted to save CheckSUR, choose to not run it.
  When the download is complete, close all open programs and browsers.

  If the installed antivirus is Firewall Norton/McAfee party or a 3rd is used, then suggest you first boot system configuration before you run it.

  NOTE: In the clean boot state will be disabled all firewalls of part 3. Ensure that the native Vista firewall is now enabled - enable Windows Firewall on or off

  Now run CheckSUR (. Windows6 0-KB947821-v12-x 86.msu).
  Restart the system for the same configuration of boot clean and do a check for updates in Windows Update in Control Panel.
  If the system can search, detect, download, and install updates now, save an update of a subsequent test.

  If the system can or cannot now, cancel the clean boot configuration and restart in normal Windows mode.
  See if the registered update installs now.

  If the system still cannot install the updates, please copy and paste the contents of one of the newspapers that CheckSUR created when he ran. They are located in and are named

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  If the system can install the updates in the clean boot configuration, but not in normal mode of Windows, then there are 3rd party software which is the origin of the update installation problem.

• I have install update Adobe Acrobat reader on my computer a few weeks ago. I was not able to print my documents, new or old. I use win 7. I tried to uninstall the program and re - install, and that has not worked. I went to the HP tapes

  I installed the update of Adobe Acrobat reader on my computer a few weeks ago. I couldn't print my documents, new or old. I tried to uninstall the program and re-install and that has not worked. I went to the HP website and from the down loaded the latest printer drivers, and that did not work. I went to tools for the production printing package that reads 'Add' tab. I clicked Add and got a (1-800-915-9430) number to call if I want to pay other services that offer Adobe. I called the number in the hope of getting my answers to the question and that has not worked. I've gotten has been a long wait (1 h) for a person to respond to the call and when they meet a poor service. I went to different forums looking for answers and found my question but not response. The messages I get are: "the document could not be printed" and "there is no page selected. Is there a solution to this problem? The version of window is Win7.

  Hi Abhishek,

  I followed your instructions and none of it worked. I had to uninstall Acrobat Reader and then update my version of the window. After that I downloaded Acrobat Reader again and it worked. Thanks again for your help.

• KB972270 security update failed to install

  KB972270-security update will not be installed. I checked the services.msi for windows install, automatic updates, intelligent transfer background and services of encryption to make sure that they are started and automatic mode (by microsoft chat); I disabled my AV (Endpoint), checked to make sure that all other facilities are made, and it will not be installed. Anyone have any ideas?  That's the message after the failure is installed:

  Installation failure Error code: 0xD000007B

  Try to install the update again, or seek help from one of the following resources. Any help would be appreciated.

  You can get Microsoft-sponsored Premium (i.e., paid) supported by the Office of response-online http://answerdesk.microsoftstore.com

• I can't uninstall the old Java version 6 update 29. I get a "error code 1606: could not locate the directory."

  I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java?  I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability.  I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory.  Help, please!

  original title: uninstall older versions of Java
  Hello
   
  Method 1:
  Check out the link and follow the steps.
   
  After uninstalling Java, how to remove its entry in the windows?
  http://www.Java.com/en/download/help/regkey_addremove.XML
   
  Method 2:
   
  See the article and follow the steps.
   
  Error message when you install a program: "Error 1606. Could not access the network location. "All the users\ directory '
  http://support.Microsoft.com/kb/315352
   
   
  Method 3:
  Check out the link and follow the steps.
  
  Download errors: 1305, 2755, 1606, etc..
  http://www.Java.com/en/download/help/error_installshield.XML
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• How do I uninstall the driver then install an updated driver

  I have problems with my Epson Stylus CX7800 printer. Only printing in black ink. Downloaded an updated driver to update but don't know how to uninstall the old and install a new one. :-(

  Hello

  First try to check the properties of the printer if Print gray scale is selected... If so uncheck... Page test print to the printer to see if its printer problem or a software problem. Consult the printer manual to know how to print a test page for the printer (no pc).

  Print a page of test directly from the printer will help you to isolate the printer cartridge, a hardware problem. If printing is all ok check then print a test page for the pc. Check under the advanced print options.

  I hope this helps.

• Acrobat Pro 11.0.16 Updater will include the 11.0.15 security update?

  Hello

  does anyone know if the update to Acrobat 11.0.16 includes the 11.0.15 security update? Accession 11.0.1 to 11.0.14 can all be installed on top of 11.0, the dry 11.0.15 could only be installed on top of 11.0.14. Someone knows the situation of the 11.0.16 update? I can install it on top of 11.0 or must you install 11.0, install 11.0.14, install 11.0.15 and finally 11.0.16?

  Thanks in advance for your help,

  Matthias

  Have you checked the requirements on the download page?

  Adobe - Acrobat: for Windows: Adobe Acrobat 11.0.16 Pro and Standard update - all languages

  "This update requires that Adobe Acrobat 11.0 or later is installed on your system.

• I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020

  I'm unable to load the microsoft KB 2378111 security update. I'm under Vist Home Premium. I get the error code 80070020. I tried safe mode, but no luck so far

  Hello

  You are supposed to try it in "Safe Mode with network"; not 'Safe Mode'.

  You need a cable connection; no wireless using this method.

  Start method 3, etc at this link if top is not solve:

  "Error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates.

  http://support.Microsoft.com/kb/883825

  {Moderator note: Thread is placed in the appropriate forum}

  See you soon.

• I can't use PS & LR full version, so I uninstall the 'old' and install them again. But I just can't. How can I install them again in version complete?

  I can't use PS & LR full version, so I uninstall the 'old' and install them again. But I just can't. How can I install them again in version complete?

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

• I used the trial before run, but I bought all the apps for 20.00 a month now. When I download it to my computer, it keeps telling me that my trial has expired. I uninstalled the program and reinstalled but it always says "expir├⌐ trial" any id

  I used the trial before run, but I bought all the apps for 20.00 a month now. When I download it to my computer, it keeps telling me that my trial has expired. I uninstalled the program and reinstalled but it always says "expiré trial" any ideas on what I can do? I paid already

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• installation failed several times to KB2656353 and KB2656370 security update. I downloaded all the patches and recommended tools. What should I do?

  Received phone call from someone who identified himself as a member of the Technical Support of the Windows team.  Says my calculation had sent messages back saying that I had a virus.  Was skeptical and didn't know how to check if it was legitimate then toldl him I would take care of him. Ran Norton Security and Windows security and both reported that my system do not have a virus.  Noticed that Windows update was not the last 2 weeks so I tried to run the updates.  I get a sayingi error message that FAILURE of installing up-to-date security for KB2656353 and KB2656370.  I downloaded all the patches and recommended tools. What should I do?

  Have you tried the recommendations in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-install-update-kb2656353-i-am-receiving/f3c353ca-4d85-44e6-a5f0-eb9a5330d7c8

  and this article:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-updates-continue-to-fail-with-codes-0x66a/5e05e18e-E2E5-400e-B114-75f155571b5c

• Cannot uninstall the program and Windows Update.

  Original title: RUNNING WINDOWS VISTA 32. WINDOWS INSTALL STOP WORKING. CAN NOT INSTALL OR UNINSTALL.

  HOW to REINSTALL WINDOWS INSTALL OR GET to WORK IF I can NOT INSTALL anything, INCLUDING WINDOWS UPDATES.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         You get the error message?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/2438651

  Method 2:

  Check if the installation of windows services are running. Follow these steps:

  a. Click Start, type Services.msc and press ENTER.

  b. double-click Windows Installer.

  c. set the start type for Windows Installer to manual.

  d. Click Start to start the service.

  e. click OK.

  Method 3:

  Re-register the windows setup program. Follow these steps:

  a. click Start, click run and then type cmd in the dialog box, and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  c. to unregister the type install windows MSIExec /Unregister.

  d. to re-register MSIExec/regserverwindows installer type.

  e. try to uninstall the update from Windows.

• KB2817361 and KB2817421 security updates are not installed

  PC family operating system XP Edition SP3 with all essential MS updates installed (with the exception of KB982381 19/12/2011 which will not reinstall and I understand has been successful). Office 2003 Pro. installed.

  Problem
  Security update (may 2013) for Word Viewer 2003 KB2817361 also be updated for Office 2003 KB2817421 will not be installed. The ball won't go away. It makes no mention of the update for Word Viewer, but the fact of Advisor Barlac.
  I tried MS Response Desk for no result also from other sites.
  Someone suggested to install the updates in "Safe Mode", but MS do advise not just for a good reason.

  desbroom

  June 29, 2013

  Manually download and try to install. If this isn't the case, I had something to install.

  Update for Office 2003 (KB2817421) security

  EDIT: I found a Word Viewer, which replaces the 2003 one. It is probably not need to patch.

  http://www.Microsoft.com/download/details.aspx?ID=4

  Uninstall your Word Viewer and install this one.