Right column is not going down

Similar Questions

• Large library that's not going down

  Hi all

  I was shocked to find recently that I had a library of 700 GB large. There is not a lot of things in there - some go pro files and some images of the iPhone-shot.

  I felt that I didn't need the master files I had transcoded everything and would be output using those so I decided to trash the master files that I felt the culprit to the library so bib.

  I did it with success and always the library file size has not changed.

  Any ideas?

  OMG! Unless you can put back master files, what you did was lost. You can't trash the master files. What is likely to take more space is the transcoded media and make files. Do not transcode, don't make unless you have to.

  IF you can't deliver the master files. Remove the files transcoded into the library and reimport to let up and start using.

  IF you can put the masters return, do so and then go to the menu file in the trash your generated files.

• Drop-down menus does not open. Click right box will not appear.

  Hello!

  Yesterday, I was working on the Wix site. I noticed that when I tried to do a right click to copy and paste text box never showed up. I realized then, on other sites, in the drop down menus would not open (as the ones where you select your State, etc.). I can't turn on the bar menu at the top of Firefox with the ALT key, but when I click Tools or anything else, the box does not fall down. Same thing for my bookmarks and menu of frequently used buttons. My right click works fine when I'm not online. I really like to use Firefox and hope that there is a better solution than to switch to a different browser. I use Firefox at work and it's there.

  Please let me know if you need more information.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

• Downloaded brushes do not showing on right click in the drop-down list

  I recently reinstalled Photoshop cs5.1 and ran into a problem. My brushes installed is not appear on my right click in the drop-down list. I took old brooms and copied the folder to the new location. When I use these brushes there was once a large drop-down list when I right click anywhere on the canvas. It shows now that the brushes from base, but here's the thing that I can load and see them through the screening Manager, but they are not on my drop-down list, like they were before I reinstalled it.

  I noticed something weird, so this can help the solution I've noticed that some Photoshop files are saved on my second hard drive, but I don't know if this is the cause.

  The reason why I have reinstalled my acceleration is GPU did not work and had to reinstall to fix this. If any other information is needed, I'd be happy to share. It's just a hack my workflow time as I have to load my own brush singlely and if I load them all that I have to go through every single brush to find what I need.

  Thank you!

  I found a solution to my problem, it can help others! I run Windows 7 64-bit has two separate applications files when it is installed. I did a search of windows to one of the names of the available brushes on my right click list. The research showed me where were the brushes. (Example: I searched in windows: DP brushes) Aparently photoshop normally installs like a "32-bit" program at this location, C:\Program Files\Adobe\Adobe PhotoShop CS5.1\Adobe Photoshop CS5.1 (64 Bit) \Presets\Brushes that's where I copied my new brushes to and it showed again. Hope this helps someone who was in my situation!

• Analysis of column (maybe not the correct wording)

  I've looked in the manual of the responses, but could not find. Help, please.

  I have a column that has unique elements that repeat. Let's say I have A column and it goes something like this:

  Apple a1

  A2 PEAR

  A3 apple

  Watermelon a4

  Apple a5

  A7 PEAR

  etc...

  I want to be able at any time to know how much of each item I have in this column.

  How can I do?

  Thank you

  You can do something like this:

  

  The formula in B2, filled to the bottom, is:

  = COUNTIF(Table 1::$A,A2)

  You can learn more about COUNTIF here.  (If you use another language, you can read on this subject in about 30 other languages too by going to the 'front page' and choose a different language in the drop-down menu after clicking on the name of the language under the great fx).  I arrived via help > formulas and functions in the menu.

  SG

• When windows update is running on my machine (and updates), my screen goes down to 1024 x 768.

  When windows update is running on my machine (and updates), my screen goes down to 1024 x 768.  I have a HD card of ATI all-in - Wonder and an Acer X203H LCD with DVI connection.  If I use system restore to go back, I can get higher resolutions, but Windows does its thing and I'm back at low resolution.  I can't change the settings manually as 1024 watch as the highest res available to the general public when this happens.  There must be some weird conflicts.  I tried to update the drivers, that made no difference.  Is there a setting Aero or the conflict at stake here?  In the past, I've had trouble with a display of balnk and I had to go back to the 2008 version of the driver to get things to work.  From there, whenever I update, I can keep high resolution, but after the last windows update (security of IE8 and much smaller pack that was released on March 28-30), it dates back to 1024 x 768 again.  Control Panel and catalyst control the two show that as more high resolution available for refresh rate. Suggestions?

  Change your update settings to find the problem, we > then right-click on > hide.

  And don't do hardware drivers through Windows updates.

  Find them in the equipment or the system direct manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista

  Download updates but let me choose whether to install them - if you select this option, Vista will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  See Update above settings to solve this problem

  See you soon.

  Mick Murphy - Microsoft partner

• Connection WiFi to internet goes down

  Hello

  I have a problem with access to the internet. After a few minutes, the WiFi connection to the internet goes down, and I'm not able to access internet again unless I restart the computer.

  I appreciate your help.
  JoPa

  Hello

  It will be interesting to know which laptop mode and wireless network card you have. Now I can just recommend to install the latest driver for WLAN card. If you have the Intel card inside it please visit http://support.intel.com/support/wireless/
  Good bye

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• When Outlook Express 6 detects emails from a name in the right column indicates the folder in which it is in. How can you tell which folder this folder is located in?

  Column of Outlook Express folder in find

  When Outlook Express 6 detects emails from a name in the right column indicates the folder in which it is in. How can you tell which folder this folder is located in?

  OE does not have the capacity to tell you where the folder is located in the folder hierarchy.  You can select different trees under local folders to find what subfolder is and what kind of tree it is under.  Unless folders.dbx is corrupted (which happens a bit), then OE will not create folders for you.  If folders.dbx is corrupt or not, I would suggest that you backup the files and the registry (see www.oehelp.com/OETips.aspx#6) before things become corrupt, because you seem to have a complex organization from your e-mail folders.

  Steve

• My laptop goes down when I try to play games. Internet works fine however.

  My laptop fell down while trying to play WoW, Civ, RATW, and Spore.I done a virus scan mcafee says the computer is clean. Internet seems to work very well as well.

  Hi DanielWilkinson,

  ·         You receive an error when the laptop goes down?

  ·         Have you updated with the latest drivers?

  Check to see if the following is useful.

  Method 1: Reduce hardware acceleration. To change the hardware acceleration, follow these steps.

  a. Click Start and then click Control Panel.

  b. click appearance and themes. Click on display.

  Note: If you use Windows classic themes, use the next step:

  c. Click Start, click Control Panel and then click view. On the settings tab, click Advanced.

  d. on the Troubleshooting tab, move the hardware acceleration in the second position of the left and then click OK.

  Note: The following message is the description for this slider control position:

  Disable all DirectDraw and Direct 3D accelerations, as well as all cursor and advanced drawing accelerations. Use this setting to correct severe problems with DirectX accelerated applications.

  e. click OK to close the display properties dialog box.

  Method 2: Log on to the manufacturer's Web site and update the laptop with the latest graphics card drivers. In addition, update the last chipset and other updates to the device driver.

• my built-in touchpad mouse will not scroll down

  original title: mouse Touchpad

  I was searching in the control panel and uninstall some programs from Microsoft (like a total fool!) and now my built-in touchpad mouse will not scroll down.  I have to use the arrows on the far right of the screen to scroll up and down.  Integrated on my lap top touchpad scroll upwards and down.   Any suggestions?  ASAP please!

  If you have a Dell, I can show you step by step. Options in Dell are not the same as the other makes it necessary.

  In general...
  Right-click on an open office space > Personalize > mouse pointers (Yes! of the mouse pointers) > from here, you will have to consider for theParameters of the Touchpad > if found, click it. Then, search equivalent of 'change settings button scroll '. If found, click it. Then, see if the "Activate " box is DISABLED. If so, check it out > OK

  See screenshot...

  

  t-4-2

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• How do you get alerts if your mail server goes down?

  I have send and text alerts sent via my server Exchange but is it built to send alerts in case our email server goes down? Foglight has a mechanism to send alerts that do not require a mail server?

  Hello

  Yes... Make sure that the failover on monitoring of Server SMTP is selected in the Config > Admin > SMTP settings area. This will continue to route alerts through our mail server, in which case your crashes.

  Thank you

• Volume, keep going down

  My cursor of volume under windows 7, keep going down and I tried to change the communication for the 'status quo', but still not working please help me

  Hi GordonCheng,

  (1) since when are you facing this problem?

  (2) remember to make changes before this problem?

  (3) what is the number of brand and model of your computer?

  Method 1: Uninstall and reinstall the \audio card drivers:

  You must be logged on as administrator to perform these steps.

  (a) open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  (b) If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in Device Manager, locate the sound video and game controller, and then double-click the device name.

  (d) click the driver tab and then click on uninstall the driver, and then follow the instructions.

  Click on the link to re - install the drivers manually

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see the link below

  Tips for solving common audio problems
   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems