RMAN-20208: until this CHANGE THAT either before RESETLOGS change

Similar Questions

• Database of duplicate and RMAN-20208

  I'm trying to duplicate an old backup in an auxiliary database. The backup and the auxiliary are 10g. When I run the following RMAN:
  

  Run {}
  until the SNA 41429334.
  target database duplicate in auxiliaries;
  }

  I get this error:
  

  executing command: SET until clause
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command set at 2010-05-17 08:54:26
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20208: UNTIL CHANGE is before the RESETLOGS change

  I try to reproduce from a consistent backup of RMAN (cold) and there was a few OPEN RESETLOGS command applied to the database, as it is a development environment. Is there a way I can work around this problem in the order duplicate. I really want to avoid copying on the existing environment, as is currently under intensive use. Any suggestions, links, answers would be appreciated.
  
  Thank you
  
  John

  If you just want to restore the old cold backup, why not just copy the backup of the auxiliary database and restore it without using a DUPLICATE?

• RMAN-20207: until the RECOVERY WINDOW, which was before the RESETLOGS

  Dear friends,
  
  I'm picking up some time and I have used this SQL in my RMAN
  
  reset the database incarnation 1;
  
  run
  {
  until ' to_date (3 Aug 10 17:50 ',' MON-DD-YYYY HH24:MI:SS') ";
  restore the database;
  recover the database;
  }
  
  and I get this error: RMAN-20207: until the RECOVERY WINDOW, which was before the RESETLOGS
  
  I thought changing the incarnation will solve the problem. I have only 2 incarnations, which is used after that the resetlogs which is number 2. So I now use 1 incarnation.
  
  How should I go about this?
  
  Thanks in advance.
  
  Nith

  user645399 wrote:
  Moved to Ribbon!

  Ok...

  Now, what you have to do: If you want to point at the time of recovery, you must have a valid backup plus archivelogs in order to recover up to the desired time.

  From now on, full backup is available for the time that you asked, however archivelogs not :(

  You must make available, controlfile catalogue and begin to restore, recover up to the hour. Then open with resetlogs option.

• Installer of Windows Vista. -Error message: "another installation is already in progress. That completes before proceeding with this installation. »

  When I go to open Word or PP files I get a message "another installation is already in progress. That completes before proceeding with this installation. "There is no other facility. I can't install the Vista updates either. I suspect a problem with windows Installer.

  marcus1145944z,

  Please post with the information requested here:what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations ofKB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to attach a PDF file as an object the WORD 2013 64 bit I'm estates following error: "the program used to create this object is AcroExch. This program is either not installed on your computer, or it does not. To change this, install AcroE

  When you try to attach a PDF file as an object the WORD 2013 64 bit I'm estates following error: "the program used to create this object is AcroExch. This program is either not installed on your computer, or it does not. To change this, install AcroExch or ensure that all the dialog boxes in AcroExch are closed. "even disabled protection at startup mode. Who made no difference

  Hi sdesk.

  This problem occurs with the 64-bit application as Acrobat is a 32-bit application making it incompatible to insert objects into a MS Word 64-bit application.

  As a workaround solution insert the object as a 'Create New' rather than create a file.

  

  Let me know if it helps.

  Kind regards
  Nicos

• I keep trying to change my cookies setting, but as soon as I close out, he return to the previous settings. How can I fix this so that making the changes will stay?

  I followed the instructions to change my settings of cookies, but whenever I click on OK and close out he returns to previous setting recall the story. How can I fix this so that the parameters iI choose will stay?

  That's ok.
  
  Firefox shows that the 'use the settings customized for history' if at least a history and cookie setting is not the default to make you aware that the changes have been made.
  
  If all the history settings are the defaults, the custom settings are hidden and see you "conservation rules: (never) don't forget history."
  
  "Never remember history" means that private browsing is active and "Always use private browsing mode" Gets a check mark.

  The default cookie settings mean that all cookies are enabled.
  
  Have you checked exceptions to make sure you aren't blocking cookies?

• I've recently updated to the latest version of the air and now itunes 'flashes' and I think that it corrupted an iPad?  Someone at - he seen this kind of behavior before?

  I've recently updated to the latest version of the air and now itunes 'flashes' and I think that it corrupted an iPad?  Someone at - he seen this kind of behavior before?

  When you have installed iTunes, and you download it from anywhere other than the Apple servers. There is a new version of the 12.3.2.35 installer that came out some time around 23/24, which can solve the problem for you. Download and install on your existing copy.

  TT2

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Counterfeiting of windos 7: I bought this computer on e - bay and was running fine until this week abd now Microsoft is tellin me that my Windows 7 holiday is a counterfeit

  I bought this computer on e - bay and it worked well until this week abd now Microsoft is tellin me that my Windows 7 holiday is a counterfeit, I was assured that I have would hold the key Windows 7 holiday and now it seems that I don't have. What, and who can speak to this topic

  eBay... What is a great place, huh?  Cheap stuff, virtually no responsibility or evidence of anything whatsoever.  Fantastic for reliable and trustworthy... Wait a minute... OH!
   
  Have you contacted the seller?
   
  Contacted eBay to let them know about the issue?
   
  Been to Microsoft web page to check your report for copy/maybe piracy?
  http://www.Microsoft.com/genuine/
   

  My suggestion - beyond the above - is to download and run the Microsoft Genuine Advantage diagnostic tool:
  http://go.Microsoft.com/fwlink/?LinkId=52012

   

  Once you have run the tool, click on the "Continue" button and then click on the button 'Copy' and paste the report into a response to this request.  It will contain information people may be able to use to help you.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• My IllustratorCS4, iMovie and iNdesign CS4 that came with my computer when I bought it about 4 years ago does not work after I was informed by a representative of Adobe until this day my computer. I still have the programs on my computer. How can I get re

  My IllustratorCS4, iMovie and iNdesign CS4 that came with my computer when I bought it about 4 years ago does not work after I was informed by a representative of Adobe until this day my computer. I still have the programs on my computer. How can I get the re install

  If you're ready to uninsntall, then reinstall, you can download at the bottom of the link;

  Download the CS4 products

• I'm 7 days in LR to the trial. After creation and 'use' to develop to edit 6 catalogues, I find without changing this or that all catalogs when opening, now have a bright red nail in different areas of the photos in the catalog. Some of the

  I'm 7 days in LR to the trial. After creation and 'use' to develop to edit 6 catalogues, I find without changing this or that all catalogs when opening, now have a bright red nail in different areas of the photos in the catalog. Some of the catalogues have been created several days ago and were considered OK, but now this 'red' hue appeared in all the catalogues without any intervention by me.

  I don't know why you create several different catalogs. Lightroom is managed much more efficiently using a single catalog. But regardless of this issue, it seems that if you have enabled clipping indicators. Pressing the J button makes the point high and indicators on shadow clipping or out of service. Or you can click on the small square in the upper corners of the histogram. Clicking the square to the left turns clipping shadow power. Clicking the square to the right will turn point highlight clipping power. I leave switched indicators so that I can identify areas that need to be adjusted so that I can eliminate all clipping.

• & quot; This change would require an amendment to the code that is locked by a model or a translator. & quot;

  I'm creating a template. As I go along, I test by creating, editing and saving pages made of him.
  
  All of a sudden, I started getting this error when I try to apply a CSS style for the editable region of content.
  
  "This change would require changing the code that is locked by a translator or a model."
  
  This will not occur when you change the other editable regions.
  
  I did a search of this forum and tried the suggestion to remove the founder of page which has not made a difference. I don't want to remove the CSS because I'm precisely apply a style to text in this region.
  
  This started happening a few hours ago and it does not in itself unfortunately.
  Thanks in advance for any ideas.

  For what it's worth, the culprit was the inclusion of the editable area
  IN a tag, i.e.,.

  
  ALT ="" width = "435" height = "1" / > "
  
  
  
  

  Since is an inline tag, and the editable region is * INSIDE * the
  tag Inline, you cannot paste block tags in there. This is what has been launched
  the error and why it has happened when you tried to change this
  region.

  The same thing would have happened if this interval had been a

  tag , or
  also, since you cannot paste block tags in their midst, no more.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "buttercupnli" wrote in message
  News:eqdp84$D3K$1@forums. Macromedia.com...
  > Well, this is now fixed! I have rebuilt everything again from scratch. There now
  > work
  > fine.
  >
  > That devil knows what was going on...
  >
  > Thanks for your help ACE. I hope that I never see this bug again. But anyway,.
  > I am
  > scared I'll...
  >

• Restore database HRCS90 question: until THE TIME which was before the RESETLOGS

  People,

  
  Hello. On December 2, 2013, I backed up my instance of database with RMAN with Oracle Linux 5 HRCS90. the backup of the database to run correctly. 2 files 'full_0doqhbqc_13_1' and 'full_0eoqhce9_14_1' are saved in the /backup_database_instance_HRCS90 directory.

  
  Because my HRCS90 database has been damaged, I need to restore the database to HRCS90 until the time 02-Dec_13 when it is saved. I have run the commands below:

  RMAN > RUN {SET until TIME ' to_date (February 12, 2013: 00:04:56 ',' DD-MM-YYYY: HH24:MI:SS') ";} RESTORE THE DATABASE ;}

  Its release: complete the restore to February 11, 14.

  SQL > alter drop database datafile offline 121;

  Its release: alter database.

  SQL > alter database open resetlogs;

  Its release: alter database.

  SQL > shutdown immediate;

  SQL > startup;

  Its release: mounted database. Open database.

  
  So I can execute select * TableName off HRCS90 the database successfully.

  Because the HRCS90 database is corrupted again, I need to restore it again on December 2, 2013. I have run the commands below:

  In the directory/u01/oradata/HRSC90 /:

  [user@linux HRCS90] $ rm *.dbf

  RMAN > Connect target;
  RMAN > RUN {SET until TIME ' to_date (February 12, 2013: 00:04:56 ',' DD-MM-YYYY: HH24:MI:SS') ";} RESTORE THE DATABASE ;}

  Its output:

  RMAN-03002: failure of the set command
  RMAN-20207: until the RECOVERY WINDOW, which was before the RESETLOGS.

  My questions are:

  Is that mean 'UNTIL TIME' before the RESETLOGS? How to solve the problem to restore the HRCS90 database?

  
  Thanks in advance.

  you have run this on your system.correct source?

  Try

  (5) name of the element: / home/user/OracleDB_Home/dbs/c-612194578-20131202-00

  Check the included file: cash SNA: cash 1947113 time: 01-DEC-13

  This backup must be available on the local system.

  HTH
  Anuj

• When will use Thunderbird extended MAPI and this change beeing worked on?

  As I said before in a previous question there some time, which i did not receive a response. Is this change in Thunderbird on a list of things to do? Yes or no

  If not please advise I have to change my e-mail program to one that supports extended MAPI.

  Best regards
  Gerry

  You have just one more question on this site.
  https://support.Mozilla.org/en-us/questions/997366 who asked on April 30, 2014 and answered 3 hours latter.

  So here we are with the same question these last 18 months.

  As Microsoft disapproved EMAPI and did not even he comes with recent versions of Windows. Thunderbird will not support this existing windows API.

  Thunderbird is compatible mapi and Toad hall you associate information about that last year.

  If you ask about a specific product such as MYOB product you referenced in your previous ad, your request in the wrong place. You must ask to MYOB. Where they will tell you they are only testing with Microsoft office outlook and nothing else. A quick look at their support forum will clear that other mail clients work and work well, but when they're not working just MYOB leaves.

  Previous topics on this forum that might interest you https://support.mozilla.org/en-US/search/advanced?q=MYOB & num_voted = 0 & num_votes = & asked_by = & answered_by = & q_tags = & product = thunderbird & created = 0 & created_date = & updated = 0 & updated_date = & sortby = 0 & a = 1 & w = 2

  MYOB support topics.
  MYOB Essentials
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird
  Right of MYOB account
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird
  MYOB Accountedge
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird

  MYOB all
  http://MYOB.com.au/business/support/Essentials-support-search-1426984472384?q=Thunderbird

  Bugs filed in Bugzilla for Thunderbird MYOB related issues
  https://www.Google.com/search?q=MYOB+site%3Abugzilla.Mozilla.org & ie = UTF-8 & oe = UTF-8

• I can't install my install my java because I get this message that says that my windows install is not properly installed.please help

  I can't install my install my java because I get this message that says that my windows install is not properly installed.please help.

  Hello

  ·        You did changes to the computer before the show?

  ·        It happens only with the installation of java or with each facility?

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Note: extend the question to the Windows Installer and try the steps.