RoboSource Control files and htt, hhc and root.fpj
Two authors are working on a project using source control. I met three questions, which are not a problem if the other writer does not work on the project.1. I can not create a new topic because of the root.fpj be checked.
2. I couldn't add/edit footer because of the htt file being checked.
3. I could not change the table of contents.
To work around this problem, the options are available?
We are new RoboSource Control and without a doubt, this is the cause of our road block, but I didn't have much luck with the findings detailed in on best practices of workflow in Source code control. Any info would be greatly appreciated, and I appreciate this forum gets larger every time I use it.
Kind regards
Joe
Hi Joe-
A few suggestions:
1. to overcome the blocking of root.fpj... organize your project with folders and subfolders, move all your subjects in the files. Don't let not all loose items in the root of the project. Then the root.fpj file should be retrieved when you add/remove/change a top-level project folder. Do not go too deep with folders, however, because you don't want your paths for too long.
2. the extraction of model... Define your models into read-only. Then no one will check out them! I smile, but I'm serious about this. Set the user rights so that only the administrator (or other special account) can make changes to the models. It is FAR too easy to inadvertently change the templates, and it is indeed a problem even more serious than the lack of access to the models.
3. can not access the table of contents... There are no that you can do about it. Only one person can work on the table of contents at the same time. Other that in fact a practice of checking files as soon as you are finished with them, all you can do is coordinated with your colleague. "Say, could check you in the .hhc file? I need access to a few minutes. "Or something like that.
G
Tags: Adobe
Similar Questions
-
Control files and backup spfile
Hi allThis is a database of GR 11, 2. There is a running script to keep the full backup.
crosscheck archivelog all; crosscheck backup; backup database; backup archivelog all delete input; delete noprompt obsolete;
I checked the controlfile autobackup using - show controlfile autobackup. and it is turned OFF
But when I run - list backup of controlfile; list backup of spfile;
I find that contolfile benefits from the support upwards and also through the above script spfile
Can someone please explain to me how this happens without controlfile autobackup
Thanks in advance
This is a normal behavior on version 11.2 and beyond
No matter if controlfile autobackup turned OFF, RMAN automatically includes the control file and the server settings file in the backups of data file
1(i.e backup database command always include datafile 1 which trigger backup of control and spfile). -
Control files and spfile backup automatic backup fails
Hi all
I use Oracle RAC 11 g ASM 2. My database is 2 knots RAC1 and RAC2.
I take the RMAN database backup ASM diskgroup (FRA) and RAC1 and RAC2-mounted network file system. I have this requirement backup also outside the DSO.
I put: set UP the CONTROL FILE AUTOBACKUP ON;
I'm runing the node RMAN backup task 2 (RAC2)
I am facing the error when taking a backup to the network file system. below
How would I fix this?Starting Control File and SPFILE Autobackup at 08-SEP-12 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 09/08/2012 18:20:06 ORA-00245: control file backup failed; target is likely on a local file system
Kind regardsHello
Please take a look at the document MOS * RMAN backup fails with Ora-00245 and Rman-08132 [1365484.1 ID] *.
Snapshot must Controlfile location on a location shared between the nodes.
-
Lost all control files and no available backup... . How to recover the DB
All,
We have lost all control files and no backups available now...
How to proceed on this to recover the database without data loss is possible...?
Oracle 10g on solarisHello
Check out the link:
http://Myracle.WordPress.com/2008/01/11/recover-database-without-control-files-and-redo-log-files/Thank you
A H E E R X -
Hi all
What are your methods to keep the files under version control, namely SVN UIR? It works very well as binary files, but if someone makes a minor change to the user interface, there is no way that you can find it visually.
I tested the TUI under SVN files and in fact a quick 'diff' shows you what is new or changed in the file. It is possible to load files TUI with LoadPanel(), but it is not possible to have the default editor UI savings as TUI, making it impassable. So, how do you do that? A think a simple solution of NOR would be to have the default option of the editor as TUI, bearing in mind that in the past, there were several cases of .tui behave differently from .uir.
If some of you are in agreement, I'll drop a suggestion.
While you cannot Editor Save only in. TUI format, you can configure it to automatically generate the. TUI when you save the file: can it be a solution tailored to your needs?
In addition, even if I do not use version control, I honor your valuable suggestion and I'll congratulations your idea when you publish.
-
lost control file and datafile addeed restore/recovery without loss of data
Here, I tried the following
created a new table called t2 and made sure the data went to a specific tablespace...
has taken a level 0 backup
remove the control file
couple of datafile to above tablespace was added and then insert more data
then went out to restore the database... but datafile and control file always could not be open? What is wrong here...
-wnet to session 2 and renamed datafile for file unammedSQL> @datafile -- list of datafile Tablespace File Typ Tablespac File Stat Used MB Free MB FILE_MB MAXMB Datafile_name FILE_ID AUT ---------- -------- --------- --------- ---------- ---------- ---------- -------- ------------------------------ ---------- --- UNDOTBS1 Datafile ONLINE AVAILABLE 16 84 100 1,024 /data/trgt/undotbs01.dbf 3 YES USERS Datafile ONLINE AVAILABLE 1153 895 2048 3,072 /data3/trgt/user02.dbf 5 YES CNT_TST Datafile ONLINE AVAILABLE 1 9 10 0 /data3/trgt/cnt_tst01.dbf 7 NO SYSAUX Datafile ONLINE AVAILABLE 626 35 660 32,768 /data/trgt/sysaux01.dbf 2 YES USERS Datafile ONLINE AVAILABLE 2031 17 2048 2,048 /data3/trgt/move/users01.dbf 4 YES SYSTEM Datafile ONLINE AVAILABLE 712 58 770 32,768 /data/trgt/system01.dbf 1 YES USERS Datafile ONLINE AVAILABLE 65 35 100 32,768 /data3/trgt/users03.dbf 6 YES 7 rows selected. -- new table is created called t2 and its going into TS called cnt_tst SQL> CREATE TABLE TEST.T2 ( C1 DATE, C2 NUMBER, C3 NUMBER, C4 VARCHAR2(300 BYTE) ) TABLESPACE cnt_tst; 2 3 4 5 6 7 8 Table created. -- data inserted SQL> INSERT INTO test.T2 SELECT * FROM (SELECT SYSDATE, ROWNUM C2, DECODE(MOD(ROWNUM,100),99,99,1) C3, RPAD('A',300,'A') C4 FROM DUAL CONNECT BY LEVEL <= 10000) ; 2 3 4 5 6 7 8 9 10 11 12 13 14 15 10000 rows created. SQL> commit; Commit complete. -- to check of cnt_tst has any free space or not, as we can see its full SQL> @datafile Tablespace File Typ Tablespac File Stat Used MB Free MB FILE_MB MAXMB Datafile_name FILE_ID AUT ---------- -------- --------- --------- ---------- ---------- ---------- -------- ------------------------------ ---------- --- UNDOTBS1 Datafile ONLINE AVAILABLE 16 84 100 1,024 /data/trgt/undotbs01.dbf 3 YES USERS Datafile ONLINE AVAILABLE 1153 895 2048 3,072 /data3/trgt/user02.dbf 5 YES SYSAUX Datafile ONLINE AVAILABLE 626 35 660 32,768 /data/trgt/sysaux01.dbf 2 YES USERS Datafile ONLINE AVAILABLE 2031 17 2048 2,048 /data3/trgt/move/users01.dbf 4 YES SYSTEM Datafile ONLINE AVAILABLE 712 58 770 32,768 /data/trgt/system01.dbf 1 YES USERS Datafile ONLINE AVAILABLE 65 35 100 32,768 /data3/trgt/users03.dbf 6 YES CNT_TST Datafile ONLINE AVAILABLE 10 0 10 0 /data3/trgt/cnt_tst01.dbf 7 NO 7 rows selected. SQL> select count(*) from test.t2; COUNT(*) ---------- 10000 1 row selected. -- to get a count and max on date SQL> select max(c1) from test.t2; MAX(C1) ------------------ 29-feb-12 13:47:52 1 row selected. SQL> -- AT THIS POINT A LEVEL 0 BACKUP IS TAKEN (using backup database plus archivelog) SQL> -- now control files are removed SQL> select name from v$controlfile; NAME -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- /ctrl/trgt/control01.ctl /ctrl/trgt/control02.ctl 2 rows selected. SQL> SQL> ! rm /ctrl/trgt/control01.ctl SQL> ! rm /ctrl/trgt/control02.ctl SQL> ! ls -ltr /ctrl/trgt/ ls: /ctrl/trgt/: No such file or directory SQL> -- new datafile is added to CNT_TST TABLESPACE and new data is added as well SQL> ALTER TABLESPACE CNT_TST ADD DATAFILE '/data3/trgt/CNT_TST02.dbf' SIZE 100M AUTOEXTEND OFF; Tablespace altered. SQL> ALTER SYSTEM CHECKPOINT; System altered. SQL> alter system switch logfile; System altered. SQL> / System altered. SQL> / System altered. SQL> ALTER TABLESPACE CNT_TST ADD DATAFILE '/data3/trgt/CNT_TST03.dbf' SIZE 100M AUTOEXTEND OFF; Tablespace altered. SQL> INSERT INTO test.T2 SELECT * FROM (SELECT SYSDATE, ROWNUM C2, DECODE(MOD(ROWNUM,100),99,99,1) C3, RPAD('A',300,'A') C4 FROM DUAL CONNECT BY LEVEL <= 10000) ; 2 3 4 5 6 7 8 9 10 11 12 13 14 15 10000 rows created. SQL> / 10000 rows created. SQL> commit; Commit complete. SQL> INSERT INTO test.T2 SELECT * FROM (SELECT SYSDATE, ROWNUM C2, DECODE(MOD(ROWNUM,100),99,99,1) C3, RPAD('A',300,'A') C4 FROM DUAL CONNECT BY LEVEL <= 40000) ; 2 3 4 5 6 7 8 9 10 11 12 13 14 15 40000 rows created. SQL> commit; Commit complete. SQL> @datafile -- to make sure new datafile has been registered with the DB Tablespace File Typ Tablespac File Stat Used MB Free MB FILE_MB MAXMB Datafile_name FILE_ID AUT ---------- -------- --------- --------- ---------- ---------- ---------- -------- ------------------------------ ---------- --- CNT_TST Datafile ONLINE AVAILABLE 9 91 100 0 /data3/trgt/CNT_TST03.dbf 9 NO UNDOTBS1 Datafile ONLINE AVAILABLE 16 84 100 1,024 /data/trgt/undotbs01.dbf 3 YES USERS Datafile ONLINE AVAILABLE 1153 895 2048 3,072 /data3/trgt/user02.dbf 5 YES CNT_TST Datafile ONLINE AVAILABLE 9 91 100 0 /data3/trgt/CNT_TST02.dbf 8 NO SYSAUX Datafile ONLINE AVAILABLE 626 35 660 32,768 /data/trgt/sysaux01.dbf 2 YES USERS Datafile ONLINE AVAILABLE 2031 17 2048 2,048 /data3/trgt/move/users01.dbf 4 YES SYSTEM Datafile ONLINE AVAILABLE 712 58 770 32,768 /data/trgt/system01.dbf 1 YES USERS Datafile ONLINE AVAILABLE 65 35 100 32,768 /data3/trgt/users03.dbf 6 YES CNT_TST Datafile ONLINE AVAILABLE 10 0 10 0 /data3/trgt/cnt_tst01.dbf 7 NO 9 rows selected. -- now the count and max ... note count before backup was 10000 and max(c1) was diff SQL> select count(*) from test.t2; COUNT(*) ---------- 70000 1 row selected. SQL> select max(c1) from test.t2; MAX(C1) ------------------ 29-feb-12 13:58:25 1 row selected. SQL> -- now restore starts SQL> shutdown abort; ORACLE instance shut down. SQL> exit Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options [oracle@berry trgt]$ rman Recovery Manager: Release 11.2.0.1.0 - Production on Wed Feb 29 14:01:48 2012 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. RMAN> connect catalog rman/pass@rcat connected to recovery catalog database RMAN> connect target / connected to target database (not started) RMAN> startup nomount; Oracle instance started Total System Global Area 188313600 bytes Fixed Size 1335388 bytes Variable Size 125833124 bytes Database Buffers 58720256 bytes Redo Buffers 2424832 bytes RMAN> restore controlfile from autobackup; Starting restore at 29-FEB-12 14:02:37 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=20 device type=DISK recovery area destination: /backup/trgt/flash_recovery_area database name (or database unique name) used for search: TRGT channel ORA_DISK_1: no AUTOBACKUPS found in the recovery area channel ORA_DISK_1: looking for AUTOBACKUP on day: 20120229 channel ORA_DISK_1: AUTOBACKUP found: /backup/trgt/backup/cont_c-3405317011-20120229-09 channel ORA_DISK_1: restoring control file from AUTOBACKUP /backup/trgt/backup/cont_c-3405317011-20120229-09 channel ORA_DISK_1: control file restore from AUTOBACKUP complete output file name=/ctrl/trgt/control01.ctl output file name=/ctrl/trgt/control02.ctl Finished restore at 29-FEB-12 14:02:39 RMAN> alter database mount; database mounted released channel: ORA_DISK_1 RMAN> recover database; Starting recover at 29-FEB-12 14:02:55 Starting implicit crosscheck backup at 29-FEB-12 14:02:55 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=20 device type=DISK Crosschecked 96 objects Finished implicit crosscheck backup at 29-FEB-12 14:02:57 Starting implicit crosscheck copy at 29-FEB-12 14:02:57 using channel ORA_DISK_1 Finished implicit crosscheck copy at 29-FEB-12 14:02:57 searching for all files in the recovery area cataloging files... no files cataloged using channel ORA_DISK_1 starting media recovery archived log for thread 1 with sequence 13 is already on disk as file /redo_archive/trgt/online/redo01.log archived log for thread 1 with sequence 14 is already on disk as file /redo_archive/trgt/online/redo02.log archived log for thread 1 with sequence 15 is already on disk as file /redo_archive/trgt/online/redo03.log archived log file name=/redo_archive/trgt/archive/1_10_776523284.dbf thread=1 sequence=10 archived log file name=/redo_archive/trgt/archive/1_10_776523284.dbf thread=1 sequence=10 archived log file name=/redo_archive/trgt/archive/1_11_776523284.dbf thread=1 sequence=11 archived log file name=/redo_archive/trgt/archive/1_12_776523284.dbf thread=1 sequence=12 archived log file name=/redo_archive/trgt/online/redo01.log thread=1 sequence=13 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of recover command at 02/29/2012 14:02:59 ORA-01422: exact fetch returns more than requested number of rows RMAN-20505: create datafile during recovery RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/redo_archive/trgt/online/redo01.log' ORA-00283: recovery session canceled due to errors ORA-01244: unnamed datafile(s) added to control file by media recovery ORA-01110: data file 9: '/data3/trgt/CNT_TST03.dbf' RMAN> -- wnet to session 2 and renamed datafile from unammed
After before was done, went back to session 1 and I tried recovered the DBSQL> select name from v$datafile; NAME -------------------------------------------------------------------------------- /data/trgt/system01.dbf /data/trgt/sysaux01.dbf /data/trgt/undotbs01.dbf /data3/trgt/move/users01.dbf /data3/trgt/user02.dbf /data3/trgt/users03.dbf /data3/trgt/cnt_tst01.dbf /oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00008 /oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00009 9 rows selected. SQL> alter database create datafile '/oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00008' as '/data3/trgt/CNT_TST02.dbf'; Database altered. SQL> alter database create datafile '/oracle/app/product/11.2.0/dbhome_1/dbs/UNNAMED00009' as '/data3/trgt/CNT_TST03.dbf'; Database altered. SQL> select name from v$datafile; NAME -------------------------------------------------------------------------------- /data/trgt/system01.dbf /data/trgt/sysaux01.dbf /data/trgt/undotbs01.dbf /data3/trgt/move/users01.dbf /data3/trgt/user02.dbf /data3/trgt/users03.dbf /data3/trgt/cnt_tst01.dbf /data3/trgt/CNT_TST02.dbf /data3/trgt/CNT_TST03.dbf 9 rows selected.
RMAN> recover database; Starting recover at 29-FEB-12 14:06:16 using channel ORA_DISK_1 starting media recovery archived log for thread 1 with sequence 13 is already on disk as file /redo_archive/trgt/online/redo01.log archived log for thread 1 with sequence 14 is already on disk as file /redo_archive/trgt/online/redo02.log archived log for thread 1 with sequence 15 is already on disk as file /redo_archive/trgt/online/redo03.log archived log file name=/redo_archive/trgt/online/redo01.log thread=1 sequence=13 archived log file name=/redo_archive/trgt/online/redo02.log thread=1 sequence=14 archived log file name=/redo_archive/trgt/online/redo03.log thread=1 sequence=15 media recovery complete, elapsed time: 00:00:00 Finished recover at 29-FEB-12 14:06:17 RMAN> alter database open resetlogs; database opened new incarnation of database registered in recovery catalog starting full resync of recovery catalog full resync complete starting full resync of recovery catalog full resync complete RMAN> exit Recovery Manager complete. [oracle@berry trgt]$ [oracle@berry trgt]$ [oracle@berry trgt]$ sq SQL*Plus: Release 11.2.0.1.0 Production on Wed Feb 29 14:07:18 2012 Copyright (c) 1982, 2009, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> alter session set NLS_DATE_FORMAT="dd-mon-yy hh24:mi:ss: 2 SQL> SQL> alter session set NLS_DATE_FORMAT="dd-mon-yy hh24:mi:ss"; Session altered. SQL> select count(*) from test.t2; select count(*) from test.t2 * ERROR at line 1: ORA-00376: file 8 cannot be read at this time ORA-01110: data file 8: '/data3/trgt/CNT_TST02.dbf' SQL> select max(c1) from test.t2; select max(c1) from test.t2 * ERROR at line 1: ORA-00376: file 8 cannot be read at this time ORA-01110: data file 8: '/data3/trgt/CNT_TST02.dbf' SQL> alter database datafile 8 online; alter database datafile 8 online * ERROR at line 1: ORA-01190: control file or data file 8 is from before the last RESETLOGS ORA-01110: data file 8: '/data3/trgt/CNT_TST02.dbf' {code} so what did i do wrong in my recovery that i could not get my data?? how can i avoid this?? and restore my DB? Edited by: user8363520 on Feb 29, 2012 12:24 PMuser8363520 wrote:
so can get us this or can't do?You seem to have:
(a) old version of data through rman backup files
(b) old version of the control file
(c) Backed archived redo logs
(d) recovery archived logs that have been recently generated
(e) current online redo logsTherefore, you should be able to bring back the database in the State wherever it was when you made the abandonment.
I don't do enough laps to be able to cite details on the commands to use (and I often find myself using the command line recovery after that file of rman restore, but the steps you need must be)Take a copy of security of the data current, archived and online redo log files.
Restore the backup control file, data files, and archived recovery logs
Recover the database by using up to cancel backup control file
You have to do 'create datafile' bit as the collection hits the 'missing file' bit
You will need to provide the names of the archived and log files online redo recovery reached their
(although, presumably, you could leave copies of the logs stored in the default location)Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
Author: core Oracle -
Incompatible control file and the data after the backup files
The company that I work has servers where some components are new more, so have a backup in the event of hardware failure. If we intend to do some clones of 1:1 of the current servers to change them in case of emergency. As most of the necessary data is not volatile and we reset stuff in any case, there is no need of replicaton, replace an old version of the database works very well. Now we could not easily get substitutes for our old material, so we had to set up new machines. And that's where my trouble starts, because now I had to actually set up the system and the database rather than do a simple copy of byte to byte. I'm mainly a programmer, using Oracle of 'other' side, but as our DBA is yet to come and the work must be done now...
So I did some reasearch and decided to do a normal backup of the cold. I have dumped the controlfile, copied data and configuration files to the new server and read the prompt SQL (no mistake there) control file. After some initial hiccups with the system (memory, etc.), I was finally about to start the database, only to get an error ORA-01190 ("1 database or control file is from before the last RESETLOGS").
I guess I did is a bad thing when you restart the database (used the wrong part of the control file) or when the copy of the data. The original data have split two readers for simplicity and logical, I copied their entire contents. So maybe I don't not copied to little but too?
As I said in the introductory paragraph, I'm not a DBA, but I'm willing to learn and listen. I don't expect a complete solution, but some guidelines when to look and what to avoid. Any help on this would be appreciated.Currently, there are some points need clarification,
1. you don't need to re-create the control file, if you have a clean shutdown database and copied all the files at the same time (data files, control files etc.)
2. If you stop DB, copied files of data but do not copy the control at shutdown file, you must re-create the control file.
3. the error ORA-19909 suggested you resetlog prior to recovery.
ORA-19909: string data file belongs to an orphan incarnation
Cause: The data file specified has been restored from a backup that was taken during a period of time that has already been abandoned by a resetlogs operation or Oracle cannot identify what incarnation of database file belongs. The alert log contains more information.
Action: Restore a backup of this file that belongs to the current or a previous incarnation of the database. If you use RMAN to restore, RMAN automatically selects a good backup.4. it would be better that again follow you from scratch the article.
for example,.
Copy the files you did copy over the data base to the bottom of the old server,
modify the control file creation scriptRECOVER DATABASE USING BACKUP CONTROLFILE;
ALTER DATABASE OPEN RESETLOGS; -
Loss of all control files and two independent of the system tablespace data files.
Hello
Loss of the controlfile and 2 data files: February 25, 2010... 15:00
Database: in Archivelog mode
Backup: controlfile and all (6) datafiles on February 20, 2010 and all archive logs are available up to the failure
-Wanted to recover.Even if the controlfiles are restored from a backup, as long as the archive + online redo logs are available, you can make a FULL recovery.
At the end of the recovery, an OPEN RESETLOGS would update the controlfile with correct information about SNA sequence # and headers of files.
(Of course, the RESETLOGS would mean a new incarnation is created and log sequence numbers start from 1 - if you perform a backup as soon as possible after the RESETLOGS).Hemant K Collette
http://hemantoracledba.blogspot.com -
Ground control point and of the CNS by using process DBWr and LOGWr?
What control point has to do with the log writer process I don't get exactly?...
As I fire 1 query updated and apparently it will generate some redo blocks which in turn will come to my redo log files now in this cycle where the control point will occur and why?
(1) my update query
(2) lock
(3) generate redo
(4) generate cancel
5 blocks) are changed, but they are still in the redo log buffer...
Now this block finally comes to redo logs in all this way to check off pointing place and why?
control point takes place also however is flushed to the data files the same reason why?
Same manner around the same question the checkpointing should do with the DBWr process as I'm unclear...
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Apart from this overview of the SNA is generated when the user launches period... and we can say YVERT can be used to identify whether or not the transaction is validated. ?
So what is the reason for the SNA update in the control file... Can b to get the last transaction committed... ??
Sorry a thread with questions so much... but this all things create a blurry image, I want to clearly say thnx for your help in advance...
I've read the documentation, but they did not mention deep for recovery... ??
Thank you
Philippe
Published by: 851733 on April 12, 2011 07:57And you the chance to read the guide to the Concepts and the book, Expert, alone that I proposed to read? I guess no, no? You mean, you have to read two books for sure because it would take a lot of time before you would get things correctly.
YVERT is a like a timestamp which oracle maintain separate trasactions of time?
Evil. CPN is with each operation, whether a DML, select, DDL, whatever it is. It's time, that's all. Validation of a transaction would be just another event that will be mapped to the SCN generated right here.
Checkpoint is a SNA during which we emptied all Sales buffers to disk?
Have you read in my last response I mentioned CPN is to read-consitancy and checkpoint is for the recvoery? So, how you said that this point of control is nothing other than RCS? See the definition of the Concepts guide,
A data structure that marks the position of the control point, which is the RCS in the thread again where instance recovery should begin. Control points are recorded in the control file and each file header data and are a crucial part of the recovery.
So assuming that the roll forward flow is as below,
Begin - Checkpoint - end
The point where the word Checkpoint is mentioned, is the place where begins the recovery.
Control files and headers of the data files are updated with the last control point (now this checkpoint is the last SNA by what buffer cache is empty so that we can know up to what our data files are updated).
Read the above, given the definition of the control point.
Buffers are marked with YVERT?
Don't know what you mean by this statement?
Tell you what, read the guide concepts and Experts, by Tom Kyte to understand these things in a way much better. Besides, if you can organize, attend the session for workshop-1 or 2 modules of Oracle University, where the instructor would release these questions into a long discussion, very strongly suggested that with the above mentioned books.
Aman...
-
ORA-01207: file is newer than the control file - old control file
Hello
Please indicate why I am facing this problem:
SQL> startup ORACLE instance started. Total System Global Area 1068937216 bytes Fixed Size 2233344 bytes Variable Size 641731584 bytes Database Buffers 419430400 bytes Redo Buffers 5541888 bytes Database mounted. ORA-01122: database file 1 failed verification check ORA-01110: data file 1: '/var/oracle/oradata/system.dbf' ORA-01207: file is more recent than control file - old control file
I use Oracel XE 11g on CentOS
Thank you in anticipation
You have restored the old control file while your data files are recent. Restore the last control file and then recover your database to open it.
-
Retrieve by using the backup control file
Hello
I was reading a book called Pro Oracle Database Administration by Darl Kuhn. There, under the theme of "The valuation of the loss of all control files", noted that all data files and control files are restored from a backup, because if we do not restore the data files the RCS in control files would be lower than the data in these scenarios files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.
It is then mentioned to use 'recover the database by using the backup control file' then apply the logs (archive and redo if necessary).
However I personally tested this script in a test environment and to bring all the backup control file could issue the same command as above and recover the database.
My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.
Thank you
If we do not restore the data files, the RCS in control files would be lower than the data files. Since online redo logs and archived newspapers is applied to the data files to roll forward in a current consistent state and does not roll forward to a control file.
It would be incorrect you have determined. You can only restore the control files. You can manually create a control file and always do the restore.
My question is I know again and archives are applied only to the data files. So how does the control file are synchronized back when we do not restore the backup data files.
The control file is updated as well.
See you soon,.
Brian -
ORA-00221: error on write in the control file
Experts,
Recently, I have been unable to connect to the console em12c and after reviewing the State of who, I got to know that my instance of database crashed.
Status of the WHO . / emctl status SGD
Oracle Enterprise Manager Cloud control 12 c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
WebTier is in place
Oracle Management Server does not work for the following reason:
Unable to connect to the repository database. SGD will be automatically restarted once he identifies database and the listener are on the rise.
I connected and checked the alert log which was below error e/s on the controlfile. I'm afraid to say that my control files are multiplexed not and I don't have a valid backup of controlfile.
alert_log Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_lgwr_25655.trc file:
ORA-00345: redo log write error block 39818 County 15
ORA-00312: thread 1 1 online journal: ' / u01/app/oracle/oradata/TRCOEM/redo01.log'
ORA-27072: IO file error
Linux-x86_64 error: 5: input/output error
Additional information: 4
Additional information: 39818
Additional information:-1
Kill Jan 28 11:34:57 2014
Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_ckpt_25659.trc file:
ORA-00206: error in writing (block 3, block # 1) of the control file
ORA-00202: control file: ' / u01/app/oracle/oradata/TRCOEM/control01.ctl'
ORA-27072: IO file error
Linux-x86_64 error: 5: input/output error
Additional information: 4
Additional information: 3
Additional information:-1
Errors in the /u01/app/oracle/diag/rdbms/trcoem/TRCOEM/trace/TRCOEM_ckpt_25659.trc file:
ORA-00221: error about writing about a control file
ORA-00206: error in writing (block 3, block # 1) of the control file
ORA-00202: control file: ' / u01/app/oracle/oradata/TRCOEM/control01.ctl'
ORA-27072: IO file error
Linux-x86_64 error: 5: input/output error
Additional information: 4
Additional information: 3
Additional information:-1
Kill Jan 28 11:34:57 2014
CKPT (ospid: 25659): put an end to litigation because of the error 221
Please help me what should be the solution to fix this error. Is this just a mistake of e/s on the controlfile, or do I have a disk failure?
var http://www.filedropper.com/messagesVersion of the OS: RHEL 5 (64-bit)
Database Version: 11.2.0.3 (64-bit)
Thank you
Fran,
Syslog does not display the IO error.
I followed the steps below to solve the problem.
1] stop the database
[2] restore control01.dbf to the backup location.
[3] mount the database
[4] recover database until cancel[5] Alter database open resetlogs.
Also, takes a full cold of RMAN backup of the database, the multiplex control files and recovery logs.
-
Problem restoring RMAN control file.
Hello
We have Oracle 11 g on Windows and daily Netbackup full on tape @ 3:00 Am and drive @ 3:00 Pm.
When we are trying to restore a DB with the following command it restore disk control file and no Ribbon.
RMAN > RUN {
2 > allocate channel t1 type ' sbt_tape 'parms='SBT_LIBRARY=C:\WINDOWS\system32\orasbt.dll ';SEND 'NB_ORA_POLICY = ORACLE_DBMS_KTPH12_PROD_BTS_Daily, NB_ORA_SERV = b-nimhp1sys101, b-btshp1dbs213 = NB_ORA_CLIENT';
4 > restoration until time ' TO_DATE (February 17, 2013 03:00 ',' dd-mm-yyyy hh24:mi:ss') ' controlfile on "G:\oradata\TLPRDd\control01.ctl" of automatic backup;
{5 >}
Why he isn't restring Ribbon and restore DISK?
Thanks in advance.
Vaishali.Look at the bottom of thread for sure it will help you...
Complete restoration of the backup DB on Test using RMAN Server
-
Error especially when the control file / spfile auto backup
Hello
10.2.0.4 on Linux
We conduct a scheduled backup RMAN on SBT_TAPE cold.
Error below is taking autobackup controlfile and spfile (rest of the dbf is backed up successfully)
Backup finished in 24 October 12
From control file and SPFILE Autobackup 24 October 12
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of command control file and SPFILE Autobackup on channel ORA_SBT_TAPE_1 at 10/24/2012 20:12:07
ORA-27091: unable to queue I/O
ORA-27072: IO file error
Linux-x86_64 error: 22: invalid argument
Additional information: 4
Additional information: 1
Additional information:-1
We check the question to the team of storage and found that the tape is accessible very well with the amount of available space.
Concerning
KSGHello;
It is an Oracle on this point, not to let the stupid title.
Register without the database with RMAN-03002, RMAN-03014, RMAN-03009 [ID 340539.1]
See the filesystemio_options parameter
Best regards
mseberg
-
ORA-00245: backup of control file failed; target is likely on a local file sys
Hello
our CARS (Linux 11.2.0.3.0) is relatively new and we are still on the acquisition of experiences with this system...
At the start of the backup with RMAN, we get the following error:
From control file and SPFILE Autobackup 4 July 12
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of command of file control and SPFILE Autobackup on channel ORA_DISK_1 at 04/07/2012 16:41:48
ORA-00245: backup of control file failed; target is likely on a local file system
The reason for the error is clear ORA-00245 - in a CCR environment, the snapshot Controlfile location must be on a shared location.
When running the RMAN command "show all" on each node, we get
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD021.f'; # by default
for the #1 node
and
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD022.f'; # by default
for the #2 node
When using a shared location for the snapshot Controlfile make us still need 2 different names for this configuration file?
CONFIGURE SNAPSHOT CONTROLFILE NAME to ' / < shared location > / snapcf_PROD021.f'; # by default
for the #1 node and
CONFIGURE SNAPSHOT CONTROLFILE NAME to ' / < shared location > / snapcf_PROD022.f'; # by default
for the #2 node
Or should set us up as a single snapshot Controlfile?
RMAN installation for "CONFIGURE SNAPSHOT CONTROLFILE NAME TO... "must be changed on both nodes - correct?
I hope my question is clear enough--any help will be appreciated.
Rgds
JH
Published by: VivaLaVida on 05.07.2012 11:41The controlfile is shared on the RAC database and having the backup of any node to shared mount point would meet the requirement.
Configure snapshot controlfile name to ' /
snapcf_PROD0.f'; Anand
Maybe you are looking for
-
Satellite A665 - controls above the keyboard does not
Hello Could someone tell me why all the command buttons above the volume control except keyboard don't work no - eco, wireless, lighting, play/pause and mute buttons?I have a fill, it happened after the last BIOS update, I did the 23.12.2010. My Tosh
-
Need your opinion: Satellite A100-049 or A100-998
I am very close to purchasing one of the above. I know that the 049 comes with Vista, xp support withh 998 which can be upgraded to Vista for a small fee. First of all, the 049 comes with 64-bit or 32-bit vista, I can't find the answer to this. Secon
-
What is connected to my Windows Live ID
Y at - it a link to see what's connected to my ID Windows Live Messenger, Hotmail, answers.microsoft.com, connect.microsoft.com etc... Sorry for the bad English. I didn't know where to put this topic so I put here.
-
CAN NOT OPEN THE DOWNLOADED DOCUMENTS
Good eveningWhen I try to open a document after download, whether it is an attachment or another, for example, the manual for the warranty of the Z3 compact, error and tells me that I can only close office suite. Can you help me solve this problem? T
-
Configure the keyboard backlight Timeout
Hello, I want to configure the keyboard backlight Timeout on Dell Latitude E6440. I use pre-installed Linux OS Ubuntu 12.04.2 Dell. I found this post http://en.community.dell.com/techcenter/enterprise-client/f/4448/p/19415396/19975858.aspx#19975858 o