Root device

Similar Questions

• Command to find out information of Boot/Root device

  I installed ESX 4.0RC on a SAN disk. I would like to know how to find out if the ESX is started from the SAN drive or Local drive. I'm interested to know CLI command to find out the root device and the boot device. Can someone help me in this matter.

  -Sabha

  On ESXi: /bootbank is a symbolic link to the boot volume. esxcfg-info - b gives you

  the only uuid. Map a device to vmkernel: partition using vmkfstools Pei

  On ESX: If each source uses a different cos vmdk and fstab (which

  part of the cos vmdk) cards/boot partition to start from a good source.

  then you look at the output of the mount to get a dev COS and partition

  for/Boot. Then cross vmk esxcfg-scsidevs - c device names.

• BB10 rooting device

  Hello world

  Just curious if we can root BB10 device?

  If Yes, what is the effect of rooting the device? can verify us this programmatically?

  Thank you.

  None

• waiting for device root

  Hello

  I'm getting the "waiting for root device" when trying to boot from a bootable usb key. Is this a problem with my hard drive or usb key. The mbp does not charge beyond that, so I'm not able to use the utility disc or AHT.

  The mbp needs a disc hard work to be able to boot from usb?

  Thank you

  Donny

  a MBP A1150 is a 15 "2006 MBP.  It will support the maximum OSX 10.6.8 is suggesting to your profile is already installed.  If the USB Installer is a more recent OSX, it can not be installed in your MBP.

  Ciao.

• root vCenter device connection refused

  Hello

  facing a problem for the last 4 months.

  I am unable to connect to the root device vcenter account.

  via ssh or local console. raise them an access denied error.

  I tried to see if the password has expired by this article: http://www.virtuallyghetto.com/2013/09/how-to-recover-vcsa-55-from-expired.html

  It was not the case.

  while I was there, I decided to try this: http://www.virtualpotholes.com/post/124746380849/how-to-reset-the-root-password-for-vcsa-60

  has confirmed that several articles said the same thing: http://www.settlersoman.com/how-to-reset-root-password-on-vcenter-appliance-vcsa-6-x/

  saved the file of the shadow, disassembled the drive and rebooted.

  I am still unable to connect local shell or ssh.

  I'm puzzled.

  I found some details on the reason that what was going on.

  When I tried to connect ssh I would just get access denied. even when you connect through the console.

  When I tried to change the console session (ALT - F1) and logging in there I got an eloquent message.

  account locked due to 1342 connection failures

  

  as I said, it's been 4 months.

  any reset procedure I tried worked. However, the account was always BLOCKED.

  According to the documents of the shadow, it was not. but according to the addin to pam tally2 it was!

  following this article (http://www.sneaku.com/2015/06/12/vrealize-operations-manager-6-0-root-account-locked/) and general linux distro forums skimming validated these results.

  I could use to unlock the account.

• How do I sync bookmarks or copy from one device to another android as my phone to my Tablet without the nonsense of having to find a desktop computer?

  Have an Asus Android eepad TF101 and a Samsung Galaxy S3. I want to copy the bookmarks of the SGS3 to the TF101 in the simplest possible.

  The save location is not accessible, unless you have a root device. If you do then /data/data/org.mozilla.firefox/mozilla/profiles I think.

• Tecra A9 recognizes any usb device

  Tecra A9 - PTS52E

  I need help/information. USB cannot recognize any device, i, e... Flash / sticks of memory, floppy drive, external cd/dvd or hard drive. previously works very well and suddenly stops and research pilot.

  TIA

  Hello

  Have you noticed yellow exclamation marks in Device Manager next to USB host controllers?
  Check it!

  Even if the yellow exclamation points are not visible in the Device Manager I recommend to remove the USB host controllers and root device manager USB hubs and restart the laptop again.
  Wait that all USB controllers will be recognized by Windows and retest your external USB devices.

  Good bye

• Lenovo S650 Custom Recovery (TWRP 2.6.3.0) Root access

  http://Lenovo-forums.ru/index.php?app=forums&module=forums§ion=attach&TID=3499&k=880ea6a14ea49e8... (Thanks to lenovo - forums.ru)

  You can take ROOT device TWRP Pentecost.

  Using the flash tool (more information on the thread in Romanian).

• Network accounts are not available

  Hello

  I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.

  I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.

  It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user

  Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?

  Kind regards

  Peter

  Any help here...

  http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/

  During his execution, rc.boot and the other rc source of scripts /etc/rc.common , a shellscript that contains utility functions, such as CheckForNetwork() (check if the network is in place), GetPID() , purgedir() (Directory deletes the content only, not the structure), etc.

  • rc.bootfigures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (the sysctl variable kern.netboot has the value 1 in this case), it works /etc/rc.netboot with a start argument.

  /etc/rc.netbootmanages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls /usr/bin/nbst to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.

  • rc.bootnumbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck. rc.bootmanages fsck and return status.
  • If rc.boot has finished successfully./etc/rc

  http://Hayne.NET/MacDev/notes/boot_sequence.html

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Could not overcome NB100 recovery cd or recovery boot option.

  Hello
  I am a person of mainframe with some experience of windows, but I'm a Virgin Ubuntu/Linux.

  I was Laura by a parent to see if I could sort a Toshiba NB100 11R with Ubuntu remix responsible. The touchpad stopped working.

  I assumed it was a problem of driver, then found my way to the drivers. I couldn't go any further, it has been password protected. The members of the family didn't know the password or even that a password has been set.

  They got the recovery disk and I got an external dvd drive, I decided to do a full restore.
  Recovery failed.

  When I tried to start the NB100, I got an error GRUB 2.

  I tried the disc of recovery again, this time I got error 20107, I can't find this documented anywhere.

  I also managed to get a boot menu at some point, that gave me the option to boot Ubuntu, or recovery. I chose the option of recovery, the operation failed with "cannot open root device SDA2 or block unknown.

  I downloaded Ubuntu 10.04 netbook edition and tried to start the NB100, the operation has failed with a multitude of read errors.

  I rebooted with the Ubuntu 10.04 netbook, this time it worked. I chose the try Ubuntu option. Ubuntu is loaded.

  It is where I am right now, I was able to load Ubuntu from the DVD player. The NB100 hard drive seems to be ok. The touchpad works. I can't get it from the dvd player or the boot recovery option.

  As I said I am a Virgin to Ubuntu, I don't know what to do from here.

  What I want to do is recover as long as the plant, I always get error 20107 when I try to use the recovery disk.

  Can anyone help?

  Concerning
  Paul

  Well... It seems that the recovery files related to Ubuntu in the 'file system' are damaged. And the grub program is severely damaged. Error 20107 means that recovery is no longer can be launched. That the error happened for me before, but when I tried to recover my database MySQL. I don't know how is this related.

  In any case, since you can access partitions of the Live CD, if I were you, you can get an external hard drive and backup all data on this disc. And install a new version of the Ubuntu Netbook Remix 10.04 you downloaded. You can install favorites when you start from the DVD of 'Install Ubuntu Netbook Edition'. When it comes to partitioning, choose erase entire hard drive. Who will install a new system with new GRUB loader as well but erase all data on the disk hard netbook. From this point, you can start the recovery from the recovery disc. I know it's a long way. But to be sure that the problem is from the recovery CD or the system itself.

  But a question, your NB100 comes with a recovery of Ubuntu disk? Computers laptop Toshiba always have problems with Linux based operating systems: S

  If you need more information, I'm here. I have worked with Linux systems for about 2 years but not as much as Windows ofc.

• Equium P200D how to enable SATA AHCI mode so I can install OSx86

  Hi im trying to install OSx86 on my new laptop Satellite P200D-139 I bought this week.
  I need SATA AHCI mode value. All other pc, I used, I was able to do it in the bios but with this laptop, the bios is so cut off from the option isn't there.
  Does anyone know how to enable AHCI mode so I can get OSx86 to start.

  Thank you
  Mark

  If I'm not mistaken, you get the famous message "still waiting for root device", right?
  Well, I really do not have much experience in the Mac OS, but it appears because of SATA drives and Yes, you're right, AHCI mode works for most of the laptops or desktop computers.

  I think there is no way to activate this option. But you may find help looking for some instructions on osx86project in google.

• OTAs and apps 'disabled '.

  When I accept the next OTA, will it go into Apps and allow all the 'disabled' system apps that I disabled? It's on a NON-rooted device; I use the built-in feature of Android to disable the annoying apps. From what I can tell, the functionality is similar to the freezing of Titanium Backup, except that it is 'legitimate' built into Android instead of from a third party and requiring a root.

  I know that when I used the root, I had to unlock things before OTAing, but will work the OTA if I let things like "handicapped"? Note that disabling an application prevents the installation for her updates, so these apps are in their factory condition... don't know if this will have an effect on the update.

  You must enable apps if you have disabled the so described to accept any OTA update.

• Allows software deletion of channels, but not the user

  I use OnDeleteRequest action to prevent the user from delete channels in my custom device.  However, I realized that this also prevents the code, I write (in this case, running on a right click action) to remove strings.  I need a way to differentiate so that the user cannot simply delete channels, but can my different actions.

  Here is what I tried:

  • Defining an AllowDelete? property on the top level element of device tailored for the duration of my action it takes to remove the items and then checking it in the method OnDeleteRequest - no go
  
  
  • Defining an AllowDelete? property on the top-level device custom action element and remove it during the loading of the page that contains the right click action (I reload after the action) and then checking it in the method OnDeleteRequest - no go
  
  
  • Defining an AllowDelete? property on top of custom device level point for the duration of the page that has the click action right and check for it in the OnDeleteRequest method-... Although I post here so...

  I use VeriStand 2013 and I put the entry to force the removal of the element to remove true function.

  Thank you

  Fixed my own problem about 20 minutes later...

  The flag to remove worked inside the action - I had just gotten in the VI tree OnDeleteRequest has lost and forgotten to move up to the root device custom.

  I hope that anyone else saving the penalty!

• theres be a way to share our G on Thinkpad non - 3 G phone 3

  because we have not rooted devices, it is not possible to activate the ad hoc support...

  but there's got to be an alternative to use capablity of our 3G phone on Thinkpad non - 3 G tablets

  Please keep this topic up. We were supposed to have a 'Business' tablet, not a device that we should get a 3 G card retailers and install it on our TPTs

  I use my 3G phone as a hot spot of wifi and then connect my TPT to the network via the area reactive.