BB10 rooting device

Similar Questions

• Command to find out information of Boot/Root device

  I installed ESX 4.0RC on a SAN disk. I would like to know how to find out if the ESX is started from the SAN drive or Local drive. I'm interested to know CLI command to find out the root device and the boot device. Can someone help me in this matter.

  -Sabha

  On ESXi: /bootbank is a symbolic link to the boot volume. esxcfg-info - b gives you

  the only uuid. Map a device to vmkernel: partition using vmkfstools Pei

  On ESX: If each source uses a different cos vmdk and fstab (which

  part of the cos vmdk) cards/boot partition to start from a good source.

  then you look at the output of the mount to get a dev COS and partition

  for/Boot. Then cross vmk esxcfg-scsidevs - c device names.

• Root device

  Hello

  In some fetures (phone Cerberus protect apps) I'm asking 'possess the device rooted. Is there a way I can change my phone status root? Is this a legitimate status for the phone?

  I'd appreciate a brief explanation, if there is a risk of ny here.

  Thank you very much

  David

  Root is just access to the base of the system files

  Rooting is a process that gives the Super Administrator/user/permissions so that you can change any file inside your operating system Android

• BB10 Alpha device not for Linux

  Hi guys! I got a camera of Alpha BB10 of the Jam. Barcelona

  I use Kubuntu Linux x86_64.

  When I connect Alpha device using the USB port, a device screen tell me about the installation of drivers, but only for Windows or Mac. Kubuntu detect device as an audio CD, but cannot climb.

  This means that I can't use Alpha device under Linux, only for Windows or Mac?

  Best regards.

  I found that its really the USB auto detect which merges in Linux.

  For detection of basic working properly, I just go into the config 'Storage & sharing' menu and change the option "USB connection" to "Auto detect" to "connect to Windows.  Now, every time I plug the device you in a Linux machine picks it up very well.

  FYI, the USB connection is basically IP - on USB.  This is not different from WiFi, except to work a bit more smoothly.

  When you enable the 'development' Mode, your computer will probably be re - detect the device to a different (and essentially constant) IP: 169.254.0.1

  PS I do all my development on Linux work, when possible.  (there are a few preview QML bugs that occur mainly on Linux, which could lead me to go to a Windows box instead of temporarily screwing with my video drivers, but it's really just a question when DIY/prototyping UI bits)

• BB10 alpha device connected to Linux but poster in IDE "not connected"

  Hello

  I use Ubuntu 12.04 and bbnk 10.0.6 for development. My alpha camera can connect to Linux and I can download the configuration previously debugging token created on another Windows XP PC to the device. I also import my key sign created previously on Windows to the current Linux environment. But now the 'not connected' USB to IDE BB10 poster display and cannot deploy any application on the device. What is the reason? He cannot mix the sign key and debug token created on a different platform like Linux vs Windows? Help, please. Thank you.

  Kind regards

  Pigling

  It works very well.  A few tips to remember:

  -Set :-> Parameters of storage and access-> USB connections (connect to Windows)

  (Automatic detection does not work with Linux)

  -Make sure development Mode is set to 'works '.

  S ' sure "ifconfig usb0" returns something, preferably 169.254.0.2

  S ' ensure that you can test the DA dev mode IP: 169.254.0.1 (this is the default)

  If all the above works, then you should be able to use it with the IDE.  If the IDE thinks that it is not connected, ignore the error and try anyway.

• waiting for device root

  Hello

  I'm getting the "waiting for root device" when trying to boot from a bootable usb key. Is this a problem with my hard drive or usb key. The mbp does not charge beyond that, so I'm not able to use the utility disc or AHT.

  The mbp needs a disc hard work to be able to boot from usb?

  Thank you

  Donny

  a MBP A1150 is a 15 "2006 MBP.  It will support the maximum OSX 10.6.8 is suggesting to your profile is already installed.  If the USB Installer is a more recent OSX, it can not be installed in your MBP.

  Ciao.

• root vCenter device connection refused

  Hello

  facing a problem for the last 4 months.

  I am unable to connect to the root device vcenter account.

  via ssh or local console. raise them an access denied error.

  I tried to see if the password has expired by this article: http://www.virtuallyghetto.com/2013/09/how-to-recover-vcsa-55-from-expired.html

  It was not the case.

  while I was there, I decided to try this: http://www.virtualpotholes.com/post/124746380849/how-to-reset-the-root-password-for-vcsa-60

  has confirmed that several articles said the same thing: http://www.settlersoman.com/how-to-reset-root-password-on-vcenter-appliance-vcsa-6-x/

  saved the file of the shadow, disassembled the drive and rebooted.

  I am still unable to connect local shell or ssh.

  I'm puzzled.

  I found some details on the reason that what was going on.

  When I tried to connect ssh I would just get access denied. even when you connect through the console.

  When I tried to change the console session (ALT - F1) and logging in there I got an eloquent message.

  account locked due to 1342 connection failures

  

  as I said, it's been 4 months.

  any reset procedure I tried worked. However, the account was always BLOCKED.

  According to the documents of the shadow, it was not. but according to the addin to pam tally2 it was!

  following this article (http://www.sneaku.com/2015/06/12/vrealize-operations-manager-6-0-root-account-locked/) and general linux distro forums skimming validated these results.

  I could use to unlock the account.

• How do I sync bookmarks or copy from one device to another android as my phone to my Tablet without the nonsense of having to find a desktop computer?

  Have an Asus Android eepad TF101 and a Samsung Galaxy S3. I want to copy the bookmarks of the SGS3 to the TF101 in the simplest possible.

  The save location is not accessible, unless you have a root device. If you do then /data/data/org.mozilla.firefox/mozilla/profiles I think.

• Tecra A9 recognizes any usb device

  Tecra A9 - PTS52E

  I need help/information. USB cannot recognize any device, i, e... Flash / sticks of memory, floppy drive, external cd/dvd or hard drive. previously works very well and suddenly stops and research pilot.

  TIA

  Hello

  Have you noticed yellow exclamation marks in Device Manager next to USB host controllers?
  Check it!

  Even if the yellow exclamation points are not visible in the Device Manager I recommend to remove the USB host controllers and root device manager USB hubs and restart the laptop again.
  Wait that all USB controllers will be recognized by Windows and retest your external USB devices.

  Good bye

• Lenovo S650 Custom Recovery (TWRP 2.6.3.0) Root access

  http://Lenovo-forums.ru/index.php?app=forums&module=forums§ion=attach&TID=3499&k=880ea6a14ea49e8... (Thanks to lenovo - forums.ru)

  You can take ROOT device TWRP Pentecost.

  Using the flash tool (more information on the thread in Romanian).

• Quick question for the owner of the device - can paste you the pictures in BBM, text msg, or by e-mail to body?

  Hey there BB10 dev device owner, can quickly check and see if it is possible to copy and paste a photo/image in BBM, text or e-mail message?

  I checked via the Clipboard API I am successfully load a picture on the Clipboard, but I make a big assumption that the user has the possibility to share in the sticky in a message. If that assumption is wrong, I need boot into the path of Messages API.

  Secondly, how can I get a dev device? Is a sufficiently similar PlayBook for me to test it on in a store?

  Thanks for the help.

  Kurt

  This is not supported.  You can use the framework of the call to share images by email, BBM, SMS, etc...

  Details are here:

  Here is an example it does: the essential of Invoking applications

  We will have more applications added to this list next week.

  InvokeActionItem {
      title: "Share Image Over BBM"
      query {
          invokeActionId: "bb.action.SHARE"
          uri: "file:///accounts/1000/shared/photos/image.png"
      }
  

  Who will send the image as an attachment.

• Monitor devices blackBerry Z10 - black except for the storage tab

  Hello

  My monitor of the device (from quick settings) is completely empty except for the storage tab. This means that battery, processor, and memory are all does not properly.

  Any suggestions?

  Thank you!

  Hello and welcome to the community!

  Each time a random strange behavior or slowness comes, the first thing to try is a proper reboot:

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. If this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.

  See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Good luck!

• Network accounts are not available

  Hello

  I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.

  I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.

  It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user

  Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?

  Kind regards

  Peter

  Any help here...

  http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/

  During his execution, rc.boot and the other rc source of scripts /etc/rc.common , a shellscript that contains utility functions, such as CheckForNetwork() (check if the network is in place), GetPID() , purgedir() (Directory deletes the content only, not the structure), etc.

  • rc.bootfigures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (the sysctl variable kern.netboot has the value 1 in this case), it works /etc/rc.netboot with a start argument.

  /etc/rc.netbootmanages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls /usr/bin/nbst to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.

  • rc.bootnumbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck. rc.bootmanages fsck and return status.
  • If rc.boot has finished successfully./etc/rc

  http://Hayne.NET/MacDev/notes/boot_sequence.html

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Could not overcome NB100 recovery cd or recovery boot option.

  Hello
  I am a person of mainframe with some experience of windows, but I'm a Virgin Ubuntu/Linux.

  I was Laura by a parent to see if I could sort a Toshiba NB100 11R with Ubuntu remix responsible. The touchpad stopped working.

  I assumed it was a problem of driver, then found my way to the drivers. I couldn't go any further, it has been password protected. The members of the family didn't know the password or even that a password has been set.

  They got the recovery disk and I got an external dvd drive, I decided to do a full restore.
  Recovery failed.

  When I tried to start the NB100, I got an error GRUB 2.

  I tried the disc of recovery again, this time I got error 20107, I can't find this documented anywhere.

  I also managed to get a boot menu at some point, that gave me the option to boot Ubuntu, or recovery. I chose the option of recovery, the operation failed with "cannot open root device SDA2 or block unknown.

  I downloaded Ubuntu 10.04 netbook edition and tried to start the NB100, the operation has failed with a multitude of read errors.

  I rebooted with the Ubuntu 10.04 netbook, this time it worked. I chose the try Ubuntu option. Ubuntu is loaded.

  It is where I am right now, I was able to load Ubuntu from the DVD player. The NB100 hard drive seems to be ok. The touchpad works. I can't get it from the dvd player or the boot recovery option.

  As I said I am a Virgin to Ubuntu, I don't know what to do from here.

  What I want to do is recover as long as the plant, I always get error 20107 when I try to use the recovery disk.

  Can anyone help?

  Concerning
  Paul

  Well... It seems that the recovery files related to Ubuntu in the 'file system' are damaged. And the grub program is severely damaged. Error 20107 means that recovery is no longer can be launched. That the error happened for me before, but when I tried to recover my database MySQL. I don't know how is this related.

  In any case, since you can access partitions of the Live CD, if I were you, you can get an external hard drive and backup all data on this disc. And install a new version of the Ubuntu Netbook Remix 10.04 you downloaded. You can install favorites when you start from the DVD of 'Install Ubuntu Netbook Edition'. When it comes to partitioning, choose erase entire hard drive. Who will install a new system with new GRUB loader as well but erase all data on the disk hard netbook. From this point, you can start the recovery from the recovery disc. I know it's a long way. But to be sure that the problem is from the recovery CD or the system itself.

  But a question, your NB100 comes with a recovery of Ubuntu disk? Computers laptop Toshiba always have problems with Linux based operating systems: S

  If you need more information, I'm here. I have worked with Linux systems for about 2 years but not as much as Windows ofc.