rotation motion blur or disable during playback

Similar Questions

• Motion blur of the keyframe in movement 5

  Motion Blur is not in FCPx as in FCP7, I'm looking for a way to have control over the motion blur via Motion 5. However, it seems that I can't same the same control over it in Motion 5. Is it possible to keyframe Motion Blur controls or have Motion Blur enable / disable in a project. It seems that it is either on or off.

  It was a great function in FCP7.

  Adam F says:

  Motion Blur is not in FCPx as in FCP7, I'm looking for a way to have control over the motion blur via Motion 5. …

  You can have something similar in FCPX, via an adjustment layer:

  in motion, creating a new title (!), ersase the layer title and in the project properties, set your Motion Blur.

  

  It is convenient to create a few different ones with parameters diff., I'm having here

  

  now, in FCPX, you drag this 'title' on your clips.

  It will affect all the clips under neath... so you can toggle Motion Blur or apply blurs diff... even fade in/out effect.

  not my idea, but actually can't find the author of genius...

  Ahh gottit, here:

  https://youtu.be/UJfrWDkWHE4

• Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen?

  Is there a way to disable automatic playback during playback of a clip in full screen or a way to see the number of frame of a clip during playback in full screen? Thank you!

  Not that I know of.

  You can always send a feature request: Final Cut Pro--> provide Final Cut Pro Feedback...

• Satellite Pro P100 - WinDVD stutters during playback

  Satellite toshiba windvd Pro100 stutters during playback of dvd movies - worse yet, when you use windows Vista media player - can help you solve?

  Hello

  If Norton antivir is running, try to disable all functions. My experience is that permanent HDD scan can force CPU for greater use and because of this DVD movie stutters all playing.

• Qosmio F60: audio and video distortion during playback of a media file

  Qosmio f60 / win 7 64 bit / 8 GB ram / 1 GB video card...
  Purchase date: June 2011

  question: audio and video distortion during playback of a media file

  of fact steps:

  (1) updated drivers audio & video > update bios > sent to Toshiba UAE; reformatted > replaced speakers; same CPU > (more funny when im not connected online using wifi, everything is good and ok) > dealers replaced wireless nic > No. SUCCESS still questions...

  (2) being researched a few discussions > reinstalled the drivers SATA > IRST update of intel > no still no chance > uninstalled TSRI > used Mirosoft AHCI > HDD and PC health monitor update > disabled all the > always unlucky (this solution came from TOSHIBA himself of their technical knowledge base)

  Resellers cannot identify the problem... I followed the technical knowledge base and still not solved...

  CAN SOMEONE PLEASE HELP ME SOLVE THIS ANNOYING PROBLEM? IT BECOMES NOWHERE >

  Toshiba tech support, please help me to solve this issue... I just bought recently and I didn't like that at all. It is not worth...

  > more funny when im not connected online via wifi, everything is good and ok
  Does this mean that this problem appears only using the WiFi network?
  Hmm how about Wlan driver update? Try this.

• Satellite A500D-10F - audio USB is cracking/nervous during playback

  Hello!

  I am having some problems with my USB Audio on my Toshiba A500D-10F.
  The sound is cracking/nervous during playback of the sounds all. Even the sound system when the computer is idle.

  I tried two devices USB (Creative Arena USB Headset and Sandberg USB Sound box 7.1) audio, both with the same crackling sound, working fine on two other laptops.
  It's not feedback, it is only when his cheek that I hear the crackling.
  When no sound is played, the speakers are quiet.

  The Conclusion is that there is a common fault audio trough my USB ports.
  Mouse, disk hard etc works fine on USB ports.

  Works sound pit that my sound card integrated works very well, but there no available analog 5.1 output, so I need an external audio device to get 5.1 analog audio output. I now use the Sandberg USB Soundbox 7.1 to achieve this.

  I tried the following:

  Install the latest drivers for the USB box
  Tried to use generic drivers provided by windows.
  Reinstalled Windows (twice)

  Tried all of the different usb ports
  Tried without that no other usb devices connected
  Adjust the flow of output
  Disabling the integrated sound card
  Disabled all other devices, including sound recording devices

  I have the latest BIOS update (1.20)

  I have a laptop Toshiba A500D-10F
  Owner of 2.3 GHz Dual core
  4 GB of ram
  Card VGA of Radeon HD 4600 series

  Windows 7 Home Premium 32 bit
  All USB ports are USB 2.0 compatible.

  Could you please help me solve this problem? I did some research and think that he might have
  something to do with IRQ sharing, although I can find no good explanations as to how I would go about to fix.

  Hi stianmakela,

  You have reinstalled Windows using the Toshiba Recovery disk?

• Movie Maker: saved big screen turns black during playback

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  Movie Maker project works well but saved movie screen turns black during playback. The music plays but not all images. I saved the project as a movie 4 times and each file size is another. Makes me think that images are not saved to the film.

  ====================================
  A few things that might help...

  There may be a compatibility issue with some of your
  source files. Convert your audio files to the. WMA
  format before you import into Movie Maker can be useful to
  a try.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Also, before you save it... go to... Tools / Options / Compatibility
  tab and disable all filters / OK.

  It may be interesting to try to save the project in DV - AVI format...
  (the file size will be much larger, but the result may be better)

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  ===

  There may be a compatibility problem with music
  files. Convert to WMA format before importing
  worth try in Movie Maker.

  There are to many converters available on the net...
  Some are free - some details... the following freeware
  is but one example. :

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your files music on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your music files are imported into Freemake,
  On the left, click on the WMA icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  That should do it...

• During playback of the gardens of the time, it freezes

  Original title: games

  during playback of the gardens of the time, it freezes when I try to visit the other sites of friends and it

  Hello

  Step 1:

  Click Start, and then type msconfig in the Search box and then press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  Step 2: Configure selective startup options

  In the System Configuration utility dialog box, click Selective startup on the general tab.

  Click to clear the Load Startup items check box.

  Note the check box use the Boot file is not available.

  Click the Services tab.

  Click to select the hide all Microsoft Services check box.

  Click disable all, and then click OK.

  When you are prompted, click restart.

  b Eddie

• His jerky in Windows 7 and Realtek audio during playback of music - after the release of sleep

  Hello

  Lately I'm encounter problems playing music on my desktop PC and my house. My desktop PC is x 64 bit my home PC is x 86. What they have in common is a NVidia card (7300 on my PC at home while 9600 on my desktop PC) and MoBo integrated Realtek Sound Chip. The systems are up-to-date, the drivers are updated via the automatic updates. When I feel his jerky, I reboot the comptuer (s) and its good to happen for a few hours. I have no idea which can be triggered to become again a bit rough sound. Sound is at once during playback of movies using Windows Media Center (on my house cause of PC I don't watch movies at work lol: D), when you listen to music using media player or Winamp. Even when I'm not touching the PC so there's no great animation on the screen. If I turn off improvements in the sound Control Panel Applet, the sound is not so rough but will not solve this problem completely.

  Software that both computers have in common:

  • TeamViewer, Mikogo
  • Skype, Yahoo Messenger, Windows Live Messenger (rarely signed), Google Talk (still signed to)
  • NCP Secure entry Client (using actively at work, I already uninstall-ed on my PC at home, the sound still jerky)
  • VMWare Server ActiveX control installed through IE (already using actively at work, uninstall-ed at home, always choppy sound)
  • Last.FM, Windows Media Player, Winamp, VLC, Miro
  • Wuala
  • uTorrent
  • Daemon Tools
  • RDTabs
  • Picasa
  • FFDShow
  • 7-zip
  • SmartDefrag
  • Office 2007
  • Visual Studio 2008, SQL Server management tools
  • SpeedFan, HWInfo32

  Suggestions to better diagnose the problem? It's kindda boring.

  Thank you
  Levi

  For those who have this problem and want to see if this resolves for you too: Click on your start ORB, type "services", press on enter, find and restart the "Microsoft Antimalware Service.  Turn on real-time protection if it is always disabled and performed before.  Check your sound, and it should be fixed!

  Vincent,

  I thank very you much for the suggestions!  Finally, some useful tips!

  I used FADS latency Checker and received peaks of 27,000 when he started to be choppy, 50 000 when it was quite rough, and really bad it had reached its maximum about 75 000 - 80, 000.

  When not jump and everything seems fine, as after a restart, the spike is not even go above 500 (if so, rarely and much higher).

  I know that material resources was not my prescription, as I am running out of 8 logical cores of 3 GHz and have 6 GB memory triple channel high speed of at least 50% most of the time.  When the bad audio dropouts are produced, I confirmed this (0-3% cpu usage) and 3 + GB available physical memory, even with my page file off to improve performance.

  While the auditor of latency DCP everything was in the Red (high values), I started through my services running and restarts, one by one.  Then I got to 'Base filtering engine', which has a description of: "the filter Base (BFE) engine is a service that manages firewall and Internet Protocol (IP, IPsec) security policies and implements user mode filtering. Stopping or disabling the BFE service will significantly reduce the security of the system. It will also result in unpredictable behavior in IPsec management and firewall applications. "I proceeded to try to restart, which pops up a message saying that 3 other services will also have to restart to restart: IPsec Policy Agent, the Windows Firewall and Microsoft Malware Protection network pilot.  I clicked 'Yes' to restart all of them, and after a few seconds, windows tells me "Windows could not stop the engine service of filtering based on Local computer.  Error 1051: a stop command was sent to a service that depend on other services running on. "If I click Ok and I look in the STC audit program and my latencies are all still red way and reading too high.  At this point, the windows firewall is disabled, all other 3 services work well.  So I try to restart again, and he succeeds.  Instantly, my auditor DCP is back green and low numbers (<500) and="" all="" audio="" skipping="" has=""> I still don't know what Department it is, because it could be these 3):

  1. the base filtering engine of
  2. IPsec policy agent
  3 Microsoft Malware Protection network driver

  Update:   Now that my sound was turned off again, I have to debug more, but I can't even see the third listed throughout the services, either on or off the coast, but restart the Policy Agent IPsec has nothing.  I restarted Microsoft Antimalware Service since he was the only one that sounded related to #3 above, and that did the trick, DCP levels and without legs instantly fell more.  I always do the same thing every two days or so, or sometimes once a day (depending on how much I use my audio...? maybe?)

  So, does make sense that this service could cause problems?  This means that it is not a driver - correct problem?  If this isn't a Realtek driver problem then it is matter of microsoft and will be fixed - this is their service and software that appear to be the cause of the issue / conflict with the driver.  I guess it could be either a problem, but the realtek and microsoft can fix it if they want to!  It would be nice not having to do now almost every day just to use the sound

  Thanks again Vincent!

• My Sony Blu - ray player keeps restarting during playback of a DVD.

  During playback of a DVD in my Sony Blu - ray BD/DVD player, he keeps cutting, then by automatically restarting itself and goes back to the home menu. It is a series of BDV-2100. Any suggestions? I disabled sleep settings. Unplugged for a minute and turned back. I did find some useful suggestions for this in community support issues. Is it a common problem with this series of Blu - ray?

  Hi Heather5300,

  Try to Update the software of the player. If it persists, try to have the player reset to factory default settings. Is the issue only happening on a particular disc?

  If my post answered your question, please mark it as "accept as a Solution.

• WMP CRASHES DURING PLAYBACK HD VIDEO

  Mr PRESIDENT, windows media player crashes during playback of 720 p video file type, it becomes white and gray Tower then program stop. and when I open any window during playback of video file, the video hangs.   microsoft patch i run tool for wmp, it detects splitter media halli causes the crash of wmp and the internet. It disables halli splitter. but can not remove it. I installed not separately halli media splitter, or matroska splitter. It is present in the rundll32.exe file. Since it is a system file, how can I remove it? syystem to fail. I installed k - lite codec pack full 5 , how can I solve this problem? Please help me.                                                                                       OS --win 7 home top 32-bit sp1 dell inspiron 15r n5010 quick heal total security

  Hi Somnathroy,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, Windows Media Player crashes when playing HD video files.

  I appreciate your efforts try the troubleshooting steps to resolve the problem. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  Is - it blocks the Windows Media Player only when trying to play a file individual or other files too?

  This problem can occur if the video adapter driver is outdated, corrupted because Windows Media Player or hardware video acceleration settings.

  Method 1:
  I suggest you install the latest video card driver from the manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  If the problem persists, I suggest you try to reduce (or turn off) the hardware video acceleration. Check if it helps.

  a. open the screen resolution by clicking on the Start button.

  b. click Control Panel , and then under appearance and personalization , click adjust screen resolution.

  d. click Advanced settings , click the Troubleshooting tab.

  e. click on change settings.

  Note: some video card drivers do not allow to change settings.

  f. move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 3:

  If the problem persists, I suggest to uninstall and reinstall Windows Media Player.

  Step 1:
  Uninstalling Windows Media Player:
  

  a. go to Start and in the search type "Turn Windows features on or off".
  b. click on "turn Windows features on or off". ""
  c. navigate to the features of media and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2:
  Reinstall Windows Media Player:

  
  a. go to Start and in the search type "Turn Windows features on or off".
  b. click on "Turn Windows features on or off".
  c. navigate to the multimedia functions and place a check mark in the face of Windows Media Player.
  d. restart the computer.

  Check out the link:

  Turn Windows or turn off features of
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Check out the link for more information.

  Play an audio or video file: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with Windows Media Player, I'll be happy to help you. We, at tender Microsoft to excellence.

• Layers down when you click the box 3d, motion blur, etc.

  I looked for an answer to this question, but couldn't find anything, so...

  Since the upgrade 2015.3, any time I click to enable or disable an option in the boxes for things like 3d, motion blur, lock the layer, interpolation, as well as other simple actions, rather than just by turning the option or not, the whole layer falls showing transformation, effects and audio data.  This happened with another version, but Adobe hastened to repair so it does not lead me to the point of madness.  This time, however, they seem to ignore, or don't care and are just ranking as "in order to help with the flow of work" which he KILLS my workflow, it helps any...

  My question is, does anyone know how to solve this problem, or if Adobe is working on a fix?  Today is the day, he pushed me over the top when I have a comp with 40 + layers and I need to activate or deactivate the motion blur that I saw... I hate Apple Motion, but if there is no solution, and before I go ballistic eager to break through the wall of After Effects, it's my option if no one can help me.

  Please help.  I hate interruptions in workflow.

  Thank you!

  Dan

  Thanks for your help, but I'm not sure that we are talking about the same issue.

  It seems to be the same problem. your layers have audio when clearly, they do not need to have the audio. Text, shapes and the whirlpool down problem. read Tim Kurkoski answer in the link I gave you:Re: new in After Effects 13.8.1 - with audio shape layers!

  The bug occurs when you work in a model that has been composed before and this model contains a layer with audio, when you add a new layer to this model (any type of layer except the cameras or lights), if this layer should not have audio it will win the audio properties in any case. When you click on a layer switch (for example, solo, lock, a blur of movement, etc.). these layers with superfluous Audio properties will automatically be twirl open their properties.

  See the workaround suggested and if it's a big problem for you, as I have written before - work in 2015.2 until it is fixed

• Nervousness on the stationary layer motion blur

  I have an After Effects project with several nested compositions .ai files. Because they must be converted I continuously rasterize / collapse of Transformations on in many places to make sure that they still come out crispy. I also have active motion blur because it is a motion graphics project, and they do a lot of moving and scaling and etc.

  I met a bizarre and frustrating bug where the blur is being kind-of applied to some of the layers even if they are not all movement. In one case the motion blur is hopping back and forth between market even when standing still and in another case, motion blur is just..., in a certain direction, once again, even if it is stationary.

  Nervous: Dropbox - jittery.mp4

  Continuously on (until it evolves, for some reason any): Dropbox - stationary.mp4

  As you can see that neither layer moves at all, but still blur seems to apply.

  How can I fix?

  EDIT: Oh, ad it is worth noting that I do not see this question in the composition of the "source".

  The project is organized as follows:

  Main comp > comp animation > Animation individual Comp > various. Layers to HAVE

  I don't see the problem of motion blur is a model of individual animation, but I see it in the model of animations.

  ANOTHER EDIT: I found as fair as disabling rasterize continuously on the layer to HAVE incriminated WILL avoid this problem... but of course, now it becomes blurry and pixelated, because it can no longer evolve as a file I.

  This is a bug that is aware of the team. Have a look here: Re: motion blur effect doesn't stop after the model move...  need you a solution that we figured out near the end of the wire.

  Please also file a bug report: feature request/Bug Report Form

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• Motion Blur Bug

  In my computer, I have a strong scaling down to a thin bar. When I rotate the bar with the motion blur on, it breaks as indicated:

  

  Without motion blur, it seems normal:

  Any ideas?

  I tested it in a machine that I have which is running 11.0.4.2

  Certainly, it looks like a bug to me. But there is no blur at all. Turn off blur and always shocking what happens (although, less fuzzy).

  Also, it does not require the layer of parenting. It does not even require keyframes - certain angles it will break just like that. Interestingly, the problem goes away when I change the half-res model.

  The problem is the solid nationally. You don't need a solid to make a line on the scale. If you simply create a solid that is the size you want, this bug will not occur.