Rotation problem Weblogic newspapers force fully using WLST

Similar Questions

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• Database adapter - creation of Datasource question - using WLST

  Hello
  
  Im tring to create a weblogic multi data source in a cluistered env osb using wlst script and get a problem by updating the plan via the script.
  
  im getting the plan through this command path in WLST planPath = get('/AppDeployments/DbAdapter/PlanPath')
  
  but the problem is that I do not get the full path instead, I get something like this "osb_cluster/plans/DBAdapter/DbAdapterPlan.xml".
  
  When I run the script even in the Environment node, the script runs correctly and update the path of the plan. Also, I get the plan full url like this path ' / u9000/app/oracle/product/fmw/osb_11.1.1.5.0/Oracle_OSB/soa/connectors/DBAdapter/DBAdapterplan.xml'
  
  is there a problem with my clustered environment. Any help is appreciated!
  
  Thank you
  knockaert

  Hello

  I think that wlst script retrieves just the string located in the config file... Check the file config.xml for your domain and correct if necessary.

  Research of...
  
  DbAdapter
  ???

  See you soon,.
  Vlad

• Use Firefox for many years now, I am forced to use Yahoo on new tabs. Goodbye Hello Chrome firefox!

  After updating Firefox, I am forced to use Yahoo when I open new tabs. Every time I change my Google search engine it changes it back to Yahoo. I found solutions for reset keyword.urI but guess it will not default to google as it was because of Firefox new partnership. I won't say what I feel now until this message and see if I'm more react.

  Yes, your first reaction is certainly understandable - such behaviour would be of course against all that firefox is the abbreviation of (initially 'user choice').

  Since these programs unwanted kind of shit often come in bulk, I also recommend you run a full scan of your system with different free security tools such as malwarebytes and adwcleaner - those who are specialized in the detection of the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Wide screen is not fully used (Win XP, Service Pack 3)

  Bought a Monitor wide screen LCD (Asus VE276Q) to replace my existing LCD display.  RGA is an entry.

  Problem: The wide screen is not fully used.

  Symptom: When starting, during Win XP Welcome screen, it seems that takes full advantage of the wide screen.

  But when he moved to the office (or a web page), about 3 inches on the left and right sides are not used.

  What I tried: play with the buttons on the monitor, but may not have to work.

  Question: How can I get Win XP to fully use the display on the big screen?

  Thanks in advance for your help.

  Skip

  Hello

  Check the screen resolution and screen resolutions, you can check the links that holds information about the same:

  Change the resolution of your monitor: http://windows.microsoft.com/en-US/windows-xp/help/setup/change-monitor-resolution

  To change your screen resolution: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

• Photoshop 2015.5 CC - OpenGL/rotation problems

  Hey all,.

  I have updated to 2015.5 later than yesterday and began having problems with the brush rotation and zoom. Attempts by using the rotation tool are filled with "Could not complete your request because it only works with the active OpenGL document windows." OpenGL is enabled, however, and it wasn't a problem before the update. Has anyone experience this problem? I tried enabling / disabling advanced graphics and restart Adobe nothing helps.

  Attach a dxdiag for reference:

  Information System

  ------------------

  Time of this report: 09/02/2016, 00:15:29

  Computer name: MARCBOX_1

  Operating system: Windows Home 64-bit 10 (version 10.0, 14393) (14393.rs1_release_inmarket.160819 - 1924)

  Language: English (regional setting: English)

  System manufacturer: power O.E.M.

  System model: O.E.M. power

  BIOS: BIOS Date: 27/07/15 18:14:38 worm: 04.06.05

  Processor: Intel Core i5-4570 CPU @ 3.20 GHz (4 CPUs), ~3.2GHz

  Memory: RAM 16384MB

  Available OS memory: 16250MB RAM

  Page file: 8816MB used, 23817 MB of available space

  Windows Dir: C:\WINDOWS

  DirectX version: DirectX 12

  DX setup parameters: not found

  DPI setting: Using System DPI

  System DPI setting: 96 DPI (100%)

  DWM DPI Scaling: disabled

  Miracast: Available with HDCP

  Microsoft Graphics hybrid: not supported

  DxDiag Version: 10.00.14393.0000 64 bit Unicode

  Thank you

  Marc

  Hi breadbutt,

  Please see the below for posting a link for the GPU tested in Photoshop CC 2015.

  Photoshop graphics processor (GPU) card FAQ

  See also the related discussion: Problem OpenGL in CS6

  Kind regards

  Mohit

• Create/configure NodeManager using WLST

  I am writing some WLST scripts to create domains, servers managed, etc.

  The final hurdle is to define the location of the log file for the NodeManager.

  I can define the address of listening, listening to port, even the logging level, but not the log file.

  The wlst I use are:

  CD ('/NMProperties')

  Set ('LogLevel', 'Info')

  Set ('LogToStderr', 'false')

  Set('LogFile','/var/log/nodemanager/file.log')

  setOption ('NodeManagerType', 'CustomLocationNodeManager')

  setOption('NodeManagerHome','/opt/wls/nodemanager')

  When I create the domain of the 'nodemanager.properties' it has correct values for the LogLevel & LogToStderr

  but LogFile is always in the same directory that the short Nodemanager.In, it ignores the LogFile property.

  Here's what I see in nodemanager.properties:

  LogLevel = Info

  LogToStderr = false

  LogFile=/opt/wls/nodemanager/nodemanager.log

  Post edited by: Java good guy the patch did not help at all.

  What version of weblogic server do you use?

  If you use 12.1.3, you must apply the hotfix

  Bug 19234430 - SOME NMPROPERTIES CANNOT BE RESOLVED CONNECTION IN WLST-offline

  Is the part that precedes, if the creation of the field?

  Best regards

  Luz

• Download repository OBIEE using WLST

  Hi all

  Currently, I am trying to download the OBIEE repository using WLST script.

  I am aware of the solution to download the repository, but the same type of solution does not work for download from the repository.

  MBean: oracle.biee.admin:type = BIDomain.BIInstance.ServerConfiguration, biInstance = coreapplication, group = Service

  Operation name: downloadRepository

  Description: Download the repository file in a path specified in rpdFilePath. Recommended sequence: lock(), resyncRepository(), simpleCommit(), getRepositoryName(), downloadRepository (...).

  Return type: void

  When I try this in my script:

  params = jarray.array(["d:\\download.rpd"],java.lang.Object)

  sign = jarray.array (["java.lang.String", "java.lang.String"], java.lang.String)

  Invoke ("downloadRepository", params, sign)

  I get an error:

  WLSTException: An error occurred when executing invoke: error while doing an invoke. : java.lang.UnsupportedOperationException: not found MBean operation 'downloadRepository (java.lang.String, java.lang.String)"for MBean registered under"oracle.biee.admin:type = BIDomain.BIInstance.ServerConfiguration, biInstance is coreapplication, group = Service"and put implemented by 'class oracle.bi.management.adminservices.mbeans.impl.ServerConfigurationMBeanImpl '.

  How do they manage to download the repository?

  Thank you.

  A colleague pointed me to sign two input parameters, while there is only a single input parameter.

  Problem solved, the operation works.

• Unable to deploy applications using WLST of EAR

  I have an archive EAR of Application that I can successful deployment of a managed server in weblogic using the Administration Console.
  
  However, when I try to deploy the same archive EAR using WLST to the same managed server, the deployment will fail.
  
  Here are the steps I followed:
  
  (1) Sourcing WL environment (setDomainEnv.sh)... »
  (

  $DOMAIN_HOME/bin/setDomainEnv.sh

  2) stage DYN_HELP.ear file in directory download WL Admin Server... »
  Start WLST

  cp $HOME/scripts/wl/DynaMed_Help.ear $DOMAIN_HOME/servers/AdminServer/upload/DynaMed_Help.ear

  session 3)
  

  Java weblogic. WLST
  
  WebLogic Scripting Tool (WLST) initializing...
  
  Welcome to WebLogic Server Administration scripts Shell
  
  Help() type help on the available commands
  
  WLS: / offline

  4) the value of the Variables of the WLST Script
  

  wl_username = "weblogic.
  wl_userpassword = "< wl_password >".
  wl_url = ' t3: / / icweb002:7001'
  wl_target_server = "DYN_HELP".
  wl_server_listener_port = 9003
  wl_server_machine = "icweb002".
  wl_nm_port = "5556"
  wl_domain = "cross".
  web_app = "DynaMed_Help."
  web_app_war = ' / u00/apldyna1/Oracle/Middleware/user_projects/domains/DynaMed/servers/AdminServer/upload/DynaMed_Help.ear '

  5) connect to WL
  

  Connect (wl_username, wl_userpassword, wl_url)
  
  T3 connection: / / icweb002:7001 with username weblogic...
  Connected to the Server Admin "AdminServer" which belongs to the field "DynaMed.
  
  WARNING: A non-secure protocol was used to connect to the
  Server. To ensure the safety of on-the-wire, the SSL port or
  The admin port should be used instead.

  (6) to deploy the Application
  

  deploy (web_app, web_app_war, target = wl_target_server)
  
  WLS: serverConfig/DynaMed / > deploy (web_app, web_app_war, target = wl_target_server)
  Application deployment of the /u00/apldyna1/Oracle/Middleware/user_projects/domains/DynaMed/servers/AdminServer/upload/DynaMed_Help.ear targets DYN_HELP (upload = false)...
  < 18 February 2010 17:10:12 EST > < Info > < deployment J2EE SPI > < BEA-260121 > < Initiating deployment operation for application, DynaMed_Help [archive: u00/apldyna1/Oracle/Middleware/user_projects/domains/DynaMed/servers/AdminServer/upload/DynaMed_Help.ear], to DYN_HELP. >
  . Impossible to deploy the application with the State failed
  Current status of your deployment:
  Command type of deployment: deployment
  Deployment status: failed
  Deployment message: weblogic.management.DeploymentException: [Deployer: 149189] attempt to exploit 'deploy' to null BasicDeploymentMBean deployment DynaMed_Help. Operation cannot be performed until the server is restarted.
  Traceback (innermost last):
  Folder "system <>", line 1, in?
  File '< iostream >", line 246, to deploy
  File '< iostream >", line 1744, in raiseWLSTException
  WLSTException: Error occurred when executing deploy: target the exception that is thrown when the application deployment: error occurred when executing deploy: deployment failed. : Error occurred when executing deploy: deployment failed.

  Am I missing something with my WLST deployment? As I said earlier, I can deploy this same EAR successfully using the Administration Console.

  WLST and administration console use the API of JSR even 88 to deploy the application, so I don't know what is different.

  Search within server admin for all log no dynamic change requires restarting the server messages. If you require a server restart, then config changes are not propagated to the server mbean DURATION until the server is restarted.

  You can post any series of commands?

• Unable to start the server using wlst in windows

  Hello world
  
  I'm trying to start the weblogic 10.3 Server thru using wlst
  startServer ('AdminServer_name', 'Domain_Name', "..."
  first it is used to give an error message saying that it is not able to get the encrypted user name and password of the boot.properties file.
  then I tried to copy - paste the username and passwd in the same order and it gives me an error saying
  
  WLST could not start a new jvm for the server process, this can happen if you have provided illegal jvmArgs or the JVM picked up all illegal JVM_OPTIONS your way.
  
  If I mention the same JVM settings from the help ('startServer') command parameters. It is said
  
  Traceback (innermost last):
  Folder "(console)", line 1, in?
  File '(iostream)", line 398 in startServer
  TypeError: startSvr(): 10th arg can't be converted to int.
  
  I am trying to get through this error
  Help, please...
  
  Thank you
  Roop

  Annoying bug of syntax:

  Works of 60000
  "60000" is not

  WLS: / offline > startServer ("AdminServer', 'base_domain', ' t3: / / host: 7009', 'weblogic', ' *", "/ opt/oracle/bea/user_projects/domains/base_domain ', 'true', ' 60000')
  Traceback (innermost last):
  File "", line 1, in?
  File "", line 398, in startServer
  TypeError: startSvr(): 10th arg can't be converted to int

  WLS: / offline > startServer ("AdminServer', 'base_domain', ' t3: / / host: 7009', 'weblogic', ' *', ' / opt/oracle/bea/user_projects/domains/base_domain", "true", 60000)
  From weblogic server...
  WLST-WLS-1253908409262:

• Using WLST to test existing data source

  Hi Forum,
  
  I wonder if its possible to test an existing source of data (WL10.3) connection using WLST. Ideally, I would like to write something to check connectivity e2e. I prefer this rather than enter the details of the DS and external test for Weblogic. It would be also better to add some test the functionality of the application and the exhibitor. Thanks for the pointers.
  
  Kind regards
  Baños.

  Hello..

  It is a method on the JDBCDataSourceRuntimeMBean, which is located in the serverRuntime tree...

  for example.

  serverRuntime()

  CD ('JDBCServiceRuntime')

  CD to target you.

  CD ('JDBCDataSourceRuntimeMBeans')

  then cd into your data Source and testPool method is available here.

• Display on a monitor is not fully used. What should do?

  I recently bought a Mac mini (end of 2014)

  OS X 10.11.5 (15F34)

  I use a Samsung 19 inch monitor via mini display port to VGA.

  But the screen is not fully used (black on both right and left of the picture)

  When I go to about this mac > display, this is show 13.9 inch (800 x 600). I changed the resolution of 1280 x 1024 through the display preferences. But it is still not working and this mac > display, shows always 13.9 inch (800 x 600). The image is blurred.

  Help, please...

  You may need to buy a graphics card in order to use a different port on the computer.

  Check the display to see if there are other options of the signal may use another cable.

  A more recent model computer should be able to use a modern with Thunderbolt screen

  connections; Some cables with ends adapter for use with older screens may work

  If the display can be used in this way. Not all of the same works if an adapter may adapt to the form.

  • Apple Mini DisplayPort adapter: Frequently asked questions (FAQ) - Apple Support

  While I have two Mac Mini computers, one is a late 2005 and the other end 2012;

  both can use an HDMI adapter for a 19 inch Samsung works for these at full resolution.

  Mini-Display port to HDMI it works; If not, using lightning.

  One of my screens use one of these cards:

  Apple Mini DisplayPort to DVI adapter

  Some display models require pilots who would be obscure and not included with

  OS X; I have another Samsung that turns, it is supported but you must use a third-

  part control panel app in the old OS X 10.5.8 and OS X 10.9.5. The X OS

  controls brightness and resolution are limited without it.

  {Since the new Mac Mini is more beautiful with a movie theater 20 inch aluminum, it's what}

  He has; the older Mini OK with a Samsung 19 inch (square), and it uses

  control software for OS X settings cannot. Most recent can use Thunderbolt.}

  Not sure if your screen is oldest of those who may need a separate control software.

  There is a updated firmware for Mini Display Port to VGA (himself):

  On the Mini DisplayPort to VGA adapter firmware update - Apple Support

  If you see not all possible display resolutions in displays preferences

  It may be due to the absence of a favorite graphics card. Or a longer display limit.

  • The display of all the possible resolutions for viewing under Mac OS X:

  http://osxdaily.com/2015/08/27/show-all-display-resolutions-external-screen-Mac/

  • About the Mini DisplayPort to HDMI - Apple Support adapters

  You may need the machine support site to test technical research view if you

  not a page printed with line info specifications said. Several different adapters

  are available; You can even use a digital TV (limits) as screen.

  • Learn more about Troubleshooting display issues.
  • Learn what adapters are compatible with the specific Apple computers.
  • Learn more on Thunderbolt and displays ports.

  The technology of the adapter and display need to better match those of the Mini.

  Older tech display should be supported within the limits. Connections and drivers.

  PS: See if the update of the firmware of the adapter you have, will allow him to work.

  If the adapter is an Apple product, it would be able to accept the firmware.

  Good luck!

  edited 3 times

• I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

  I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

  TIA,
  BWSwede

  Try to create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  What problems do you have that you want to reset Firefox?

  Firefox creates a new folder of old data of Firefox on the desktop?

  If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• Problem with pole-zero analysis using multisim

  Problem with pole-zero analysis using multisim

  Party a pole / zero analysis is linearizing circuit using an operational RODC analysis, in which a driver acts as a short circuit. The problem is that in your circuit, the inductor in parallel with a source of internal tension unit.

  Use a small resistor (1mOhm will do in your case) in series with the generator output functions to break the loop short-circuit.