Route specified cannot be fulfilled for edge on Dev1/AI/SampleClockTimebase counter
Hi all
The synchronization signal digital recording using PFI0/PFI1 , I was able to record the arrival time of a digital signal on PFI0 compared to samples in an analog input task with the task of the SampleClockTimebaseSource. This well it worked when you use just one of the modules in a cDAQ-9188XT, but when I set up a task to acquire analog input, all the modules I get now:
89137 error: specified route can not be satisfied, because it requires resources that are currently in use by another route.
Property: SampClk.Timebase.Src
Property: SampClk.Timebase.ActiveEdge
Source device: cDAQ9188XT-18D1D88Mod1
Terminal source: AI/SampleClockTimebaseHF
My guess is that SampleClockTimebaseSource is used by the cDAQ to synchronize the acquisition between modules and now it is not available for my task of counter. Is there another way for my task as counter to access/share this clock signal?
See you soon,.
Pat.
Tags: NI Hardware
Similar Questions
-
Cannot specify a different location for multiple-image backups.
I want to record several image files on an external drive (which can contain a large amount of data)... It was suggested to specify a different location for the second image... but when I run the process of backup image... first a screen shows my external drive where the image will be stored... but then the screens seem to just continue to do a backup. I don't see any place where I can change the location of the image... It keeps on the re-write on the last saved... image I think that maybe you can change the location of the regular backups... but not for the image file... its on another screen or buried somewhere... the help screen with "attention, images can be replaced" is meaningless for me... I thought he said that it would only replace old images if there is not enuf room on the disc.
thanx
Steve
Hello bichon,
Thanks for posting on the Microsoft answers Forum.
Look at the post below which asked questions on images and backup locations.
http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/338e311d-c0fc-4c56-a4c2-b25a7028188b
With this option, below is where you can make changes.
Select the drive to destination or optical disk or network location to store backup files. (this is where I want to change the destination directory name).If please reply back and let us know if this helps answer your question.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Wireless router / Internet problems
I am running Windows Vista Home Edition with Security Essentials. I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity. Is there a firewall setting that could cause this problem?Hello
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Pages pull up of certain documents and States "it cannot be opened for some reason any."
I use the Pages more up-to-date on my macbook, but whenever I have pull up some documents, he says that he cannot find it for some reason any? I had no problem before, but all of a sudden does not work?
If you get a dialog box that says essentially that "Pages cannot open this document for some reason any", you're actually done with this document because he suffered internal damage. Get an old copy of your Time Machine backup.
-
HP 8630 will authorize specifying the second tray for printing shortcut.
All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.
I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.
The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.
In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.
Change the source of your document must make all the problems disappear.
Kind regards
-
Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
How can you specify the default value for the undefined array elements
According to aid LV, the tables have two default values, the normal default value and the default value for the undefined array elements.
I assume that there must be a way to specify the default value for later, but I can't find it anywhere. Any ideas?
I know that you can drag the item out of the table container. Change the default value on this scalar element. Then drag the item in table tank.
-
I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.
* original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*
The application-specific permission settings do not authorization for the application server COM with the CLSID{DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.In the opposite case
http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html
http://TechNet.Microsoft.com/en-us/network/bb545879
http://www.blackviper.com/wiki/Network_Access_Protection_Agent
-
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
Original title: Windows Update
I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.
The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.
I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.
Operating system is Vista 64 bit.
After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.
-
Router E4200, cannot secure the wireless network
When my E4200 wireless network appears on a discovery list of wireless networks, there a padlock beside him in devices (like my Xbox and iPhone) that who would use to show that it is a wireless network, requiring a password. When I use my Xbox to connect wireless now, he said: "you connect to an unsecured network. Are you sure you want to continue? »
I used the web portal to select 'Factory Reset' of my router. I also told my iPhone to forget and not automatically connect wireless network. After factory reset, I went to the configuration section of the web page wireless network access router, put a new name for the wireless network, personal WPA2 enabled for 2.4 and 5 GHz networks, developed a completely new password for two I had never used before and then looked for the network on my iPhone. I chose it and it connected right away without asking for a password. Still once, the network does not appear with a padlock next to him in the list of devices to the network from my iPhone WiFi and my XBox says always that this is an unsecured network.
When using my internet browser to access router, WiFi networks are both classified as WPA2 Personal and each has a password in the password box (and Yes, I recorded the changes - that's what it shows even if I disconnect and then reconnect to the router access.) I tried to remove the power cord for 30 seconds and plug in again and there is no change.
It's quite a recent change, like maybe the last week or more. I don't know if there was a firmware update or what - my router is configured for auto updates and when I click to check the latest updates, it says that there are no more updates available.
TL; Dr: said access my router my wireless security is turned on. None of my wireless devices see as secure WiFi networks and each of them can connect without having to type a password.
Do a reset factory and set up from scratch.
If this fails, try this:
Manually download the FW file to the local office of PCs.
Reset the router, use IE or FF with all security disabled add-ons, load the FW file and let you treat.
Factory reset the router once more and set up from scratch. -
Cannot open volume for direct access?
OK so I have windows vista 32-bit home... and I installed this program from avg that solves all the problems on the computer... Well now when I boot, I get a cannot open volume for direct access... and I loaded my computer finally and its telling me everything is corrupted?
Hello
I'm sorry but most of the posters, which I am part, who come here do not believe in using Tuneup Utilities, registry cleaners, etc. to improve performance or solve problems.
They are completely unnecessary.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Or, if you don't have one, borrow a DVD of Microsoft Vista, not a recovery disk and you could do a upgrade in repair facility.
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And I have contacted AVG or their Forums as you say it was their program that caused the problems.
http://free.Avg.com/us-en/support
See you soon.
-
When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer, It does not also. check me the update history
Hello
1. you made any hardware or software changes the computer recently?
2. What is the number of update?
3. do you get this message for all the updates?
Follow these methods and check if that helps:
Method 1:
Step 1.
Unplug all external devices, restart the computer, and then try to install updates.
Step 2:
I suggest that you follow the steps mentioned and try to start the Windows update service.
Check if the following services are running.
(a) Background Intelligent Transfer Service
(b) cryptographic Service
(c) Windows Update
(d) Windows Installer
a. Click Start, type "services.msc" (without the quotes) and press ENTER.
b. double-click the service name in the Services list.
c. under the general tab, next to startup type, make sure that automatic is selected.
d. If the service is not already running, under Service status, click Start and then click OK.
e. once the services are started and defined as running, try to install the updates and check.
Method 2.
You can follow the steps in this article: http://support.microsoft.com/kb/2509997
Warning check disk.
Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
See also: the problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Unlike before, I can't launch the Windows automatic update service now, I suspect that my computer is infected virus, I just install demo version free of McAfee internet security and run a full scan, no infection has been detected.
Description:
When I click on Windows update for all programs at startup, pop out window update, and then I click on "check update", out another part: list "" Windows Update cannot currently Check For Updates, because the Service is not running. "You may need to restart your calculater ', then I restart the computer a few times, the same problem still persists. before I was using microsoft essential secruty with no problems, but now I can't seem to complete the definition of update, so I think this problem could be related to Windows Update and decide to uninstall MSE and replace it with McAfee, but it does not work.
any help and suggestions would be very appreciated.
Hello
Steps 2 to 6 to identify the program that is causing the problem if the clean boot solves the problem.
Try the procedure described in the following article to improve your computer's performance.
Optimize Windows 7 for better performance.
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
Ways to improve your computer's performance.
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
-
Cannot find software for microsoft lifecam vx800
Cannot find software for microsoft lifecam vx800 on p.c. that I try to upgrade to windows 7. telling me it is not compatible with windows 7 and t uninstall it. did it, but still won't let me upgrade t
Unplug the unit from the PC. Restart the power off PC. Check in Control Panel programs and features for any reference to the Lifacam. If it's there, highlight it and delete. Chweck for the reference to the Lifecam Device Manager. If there, remove it. Reset. Repeat the upgrade.
Tom Ferguson
-
Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;
C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
I use Vista Home premium 32-bit.Cheers, Rob.Hi robgrimes
As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20
I hope this helps.
Maybe you are looking for
-
In the preferences of what "Override automatic cache management" wants to say and do?
I was wondering what "Overrides automatic cache management" means and does.
-
Re: Satellite M35 S359 - 'machine wrongly' while trying to use the recovery disk
I used it several times without fail. After that the laptop started acting a little strange recently (malware maybe) I decided it was time to rebuild. This time, I had 'bad machine' attempt of recovery CD error. I installed the brand new Toshiba HD,
-
Boolean logic: Bit of activation &; deactivation
Hello I know how to turn a bit (bit high set) in LabVIEW. ******** For example, let's say I have 101, and I want to activate the Middle bit. To activate the Middle bit, I would use the OR operation. 101 10 OR that would produce 111. I can do that i
-
attention - slow typist! yesterday I tried to redo or to make first place, my screensaver, just stopped - perhaps is there a mute on the you tube page, I just accidentally hit?
-
The desktop icons back to the generic icon of IE
I use Vista Home Premium on a new computer. When to create internet related shortcuts (e.g. Yahoo) I get a generic IE icon 'E '. After changing by another icon, so that they don't look alike, on reboot they come back to the generic 'E '. When I cl