Router EA2700 cannot be acecssed by the IP after power failure

Similar Questions

• GSM7224v2 loses the configuration after power failure

  As the topic title says - this device (new for me but flea market) loses its configuration after power off.

  I don't see any button cell within the unit for volatile memory backup. Surely the configuration lives in non-volatile storage?

  I am being dumb and I'm missing something?

  Hi neidlo

  Welcome to the community!

  Yes configuration lives in a non-volatile memory, when it is saved. Until it is saved, it is in RAM.

  When configuring the switch, it is not automatically saved. Using Web Interface (GUI)? A "Save" button should do.

  Please let us know whether or not this was the burden

  Kind regards

• Message "Set up the reboot" turns the loop after power failure

  I reinstall Windows XP on my PC and there is a power outage during the time of "Windows Installer". Then the error message "Set up the reboot" comes on the loop and repeats indefinitely.  When I tried to enter together at the top, he's going bonkers and I wasn't able to change the boot priority so drive.  What fun that happens and can u please help me solve the problem?  Otherwise, it is worth of empty hard disk before I try reinstalling on another PC, because I suspect that the HDD is adrift of the semi nudity?

  Your solution is much appreciated in advance.

  Ranga

  Hello

  The article below may be useful.
  Setup may restart during the installation of Windows XP http://support.microsoft.com/?kbid=891892&SD=tech material detection phase

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• El captain cannot remove photos from the iPhone after importation

  I opened the Photos App and imported my photos. It helps to have an option to remove photos from my phone once they have been imported. What happened to this option? Is there a way to remove photos from my iPhone after importation?

  ShamikasiPhone wrote:

  What happened to this option?

  iCloud

  Is there a way to remove photos from my iPhone after importation?

  Discover >delete photos from the iPhone after import - Photos

  then > deleting photos to iPhone but not iCloud

  and > OS X Photos App: remove already imported from iOS Device

• Cannot open windows on the laptop after the closure of unexpetodly

  When turn on laptop, it tries to load windows then said sorry this unexpetodly closed, try to start safe mode network safe mode, or start windows normally, I tryd all of these solutions and does not always

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  Something like this:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (your most recent settings that worked)
  Start Windows normally

  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must manually call the Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Cannot take possession of the two machines after power failure

  Greetings...  Recently, I experienced a power failure to my office when I was running two different virtual machines.  After the reboot, I am unable to connect to machines like VMWare tells me "this virutal machine seems to be running."  If I press the button "Take Ownership", he immediantely is back with a dialog box saying "Appropriation of this virtual machine failed."  How to unlock these machines?

  Thanks in advance

  Jason

  Hello

  First stop of VMware Workstation, then go and have a look at the folders where are stored the your virtual machines.

  It is likely that you will see some .lck .lock files or folders. Which ones you will see (lck or lock) depends on the version of your VMware product.

  Delete these files (move them to another folder if you are more comfortable with it), and then return to VMware Workstation.

  Reopen the virtual machines and chances are big enough to make them work as they used to be.

  Good luck!

  --

  Wil

• Error code 10 cannot install Maxtor 3200 after power failure

  Original title: maxtor 3200 code 10

  After a power failure cannot not re install Maxtor 3200 get response Code 10

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you run the FIXIT from the link below and if it helps. You can also follow the manual steps and check.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Hope this helps and keep us posted.

• Cannot move photos to the computer after the upgrade to iOS10

  Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer folder.  The phone does not appear in Windows Explorer and I don't get the second ba - beep that normally, I had before the upgrade.

  I restarted the phone and the computer, then tried again with no luck.  I myself have sent pictures that were on my phone, deleted all of them film, then took some new pictures and tried again.  Still no luck.  Help!

  Your post is the 4th now ask about the same problem. One user solves the problem by connecting the phone to a different USB port on the computer. You might want to try it.

• Cannot add or organize the bookmarks after update of Mozilla

  Did an update of Mozilla yesterday. Subsequently all the bookmarks and the superior browser tool bar had disappeared. With the community help I Got those backward with the exception of at least one category/title of the bookmark. Research on this title he has not revealed, but the search for bookmarks which were under this title aired on search results. However it was not clear how to create the title again and put the bookmarks under this title. The function to organize the bookmarks is missing. Also the feature to create new bookmarks disappeared.

  The menu planning is context sensitive. If you click on the bookmarks Menu in the left pane, or double-click it in the right pane, then Firefox should list current folders and bookmarks in the menu - and organize most of the items shaded in the menu should come back to life.

• Cannot drag to scrub the screen after update tvOS9.2

  Since the AppleTV OS updated March 22, 2016 I can drag is no longer on the left and right on the remote control to quickly scrub through the video playback. I can slide left and right through the menus, but as soon as I start to play a video on Netflix, Plex etc, slide sideways does nothing. I tried to reset my AppleTV and update the operating system and it still has the same problem. My remote is fully charged. The only way for me to pass on or recoil during video playback is to hold down the left or right of the remote control (slow process), or ask Siri to ignore the minutes before 15, 20, 30 (or otherwise) which is a huge nuisance. Does anyone else have this problem?

  Try pressing and releasing the surface touch first and then scan.  It works for me.

  I think it was to avoid sliding involuntary during playback.

• Cannot find my photos, the music after disk cleanup stuffs, where can I find them?

  I tried different ways to the decompression of files, but all is in vain. Help, please.

  are you using Windows Disk Cleanup?

  unless your data has been in temporary files, that they would not have been deleted

  Set the folder options to show hidden folders, see file extensions

  

  then do a search for a photo or a file that you know the name to ensure that the search is to search through hidden files also.

• cannot type information about the programs after installation

  I opened software tax to work on taxes and display cursor on the boxes.  Some boxes have nothing on them, but if I click on it, my information is there. What is the problem and how can I fix it?

  Hello Marcus2010,

  Thanks for posting on the Microsoft answers Forum.

  I suggest that contact the tax management software manufacturer. You can also check in the Windows Vista Compatibility Center to ensure that the software
  is compatible with Vista. Click here for a link to the Windows Vista compatibility.

  This will help to point you in the right direction.

  Thank you, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot select Images of the files after import

  Hello.

  I'm new to Lightroom.  I created a catalog last night by import (add) approximately 33 000 existing images to my hard drive.  They are organized into folders by date.  For some reason, I can select folders and Images in the left panel of all records before a certain date, but may not for files after a certain date.  No idea what's going on.  Maybe gone bad import?  If I click on a problematic file the Image will change in the little window above the list of records, but not in the main window of the plant.  Thanks for the help!

  Here's a post about the limit of 1600 records in a parent folder:

  Re: Folders appear in the catalog, but unable to see the photos in folders after a certain folder

• Cannot be saved on the network after update 11.0.10

  If I open an interactive pdf that is currently on a network drive and save as I get a message that says "the document could not be saved. Unable to save this file name. Please save the document under a different name or in a different folder. "I'm a domain administrator and have full access to this place is not a permissions problem. I can save other documents it and make changes to them without problem. Only Adobe Reader. If I go to another computer with Adobe Reader 11.0.9 and do the same steps that it works without problem. Anyone out there know if there is a fix for this yet?

  I use Windows 7 64-bit. This also works fine if I save on my local PC. Only happens when we go to a network location. I also test it on a PC that has 11.0.9 worked well, to give birth to 11.0.10 and have the same problem where it won't save to a network location.

  Try to disable the Safe_mode as a "Test."  If it works then it probably means you need to add the share on the server as a "place of trust.