Router-on-a-stick with RVS4000

Similar Questions

• No sticker with the license number Windows XP for Toshiba NB100

  I lost the sticker with the license number Windows XP for Toshiba NB100. I have an invoice.
  How can I recover the license number?

  Licensed refused to support this topic.

  Hello

  You can't get the license number.
  First the sticker on the bottom of the unit has been a serial OEM key. This key cannot be used and would not work under Win XP installed system costs.

  The point is that Toshiba image which was preinstalled on this laptop has already been activated, which means that this key has been useless.

  I assume that you have not created a disk recovery Toshiba (or flash USB stick) in the past? Right?
  These records would be reinstall the image of Toshiba containing the active Win XP system.

  Well, usually it of possible to order this disc [here | http://backupmedia.toshiba.eu/landing.aspx] but I think that would be more because of the age of the laptop.

  Solution: you have to buy Win XP with valid serial key.

• Sticker with the product key Windows under the laptop is unreadable

  Hello Toshiba Help Center

  Please help me solve this problem

  Three years ago, I bought a laptop Toshiba with Windows Vista preinstalled. I also received a DVD with her recovery. I now want to reinstall Windows and completely format the hard drive - however, the sticker with the product key Windows under the laptop is unreadable. So what I did... I formatted my laptop for windows 7 and after a few months, I want to recover my product key and install windows vista pre - with the original product key that sound now
  unreadable...

  Is it possible to get it back by, my laptop series No, or...
  Best regards, TOSHIBA
  IM bluebird.jeff

  Hello, Jeff

  At first, I must say that it is not toshiba Help Center, but user forum created by Toshiba, so if you wait for the response from Toshiba people here you are in the wrong place.
  In any case, in this forum, you can pick up some very useful information and a lot of people here can help you with your problems.

  Return to described the issue.
  Unfortunately you do not understand how it works with the product key and Windows Setup, so I'll try to help you with this.
  Each computer toshiba laptop comes with preinstalled operating system (recovery image) and the product key at the bottom of your laptop belongs to this version. With other words: when you buy the new laptop, you have to pay for hardware, operating system and a license for this preinstalled OS. Product key at the bottom is not a kind of universal product key and cannot be used for activation of another version of Windows.

  You can use the delivered Toshiba recovery disc that contains mage replicated several times and each time you will have activated the operating system. When you use the Microsoft disk for the installation of the OS you must have valid product key which belongs to this particular version.

  In your case product key is for Vista, and you cannot use it for Win7 activation. This product key is... unnecessary.

  If you have any other questions you are welcome.

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• A torn my sticker with the serial number. How to find the number of the whole installation?

  Best regards, tore my sticker with the serial number. I don't see the numbers. How to find the number of the whole installation?

  Original title: windows 7 sn

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

• I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and once again if I need to paste everything first: to leave what shortcut I use

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  On Mon, 24 Sep 2012 15:49:08 + 0000, ajay8055 wrote:

  I just copy a file by ctrl + c then I'll stick with ctrl + v, that after I copy the file (b) by ctrl + c and paste ctrl + v and still, if I need to paste everything first: to leave what short cut I have we

  You can't do it without third-party software. Just go back and
  Copy the file (a).
  Ken Blake, Microsoft MVP

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Trying to activate 6 Lightroom on a machine to activate it on another.  Not to be activated in the menu help - certainly not the way to do when I connect.  I'm really bored with trying to stick with adobe products...

  Now I have to type it again!

  Trying to activate 6 Lightroom on a machine to activate it on another.  Not to be activated in the menu help - certainly not the way to do when I connect.  I'm really bored with trying to stick with adobe products...

  Oh the adobe, what happened to you?...

  Click Help > "logout".

• Router-on-a-stick VLAN possible with SRP547w & SG200-26?

  According to the title, I need just 3 or 4 VLANS with communication inter - VLAN enabled.

  In the past I used this router with every internal switch set to one VLAN port different with each in turn hooked up to a switch.  This did work for me, but I want to dip my toe in the world of .1q VLAN and acquire additional flexibility and cleanliness.

  Kind regards

  Brandon.

  Hi Brandon,.

  On the RPS, navigate;

  • The interface Setup > LAN > Configuration of VLAN
  • Create the VLAN with the attribute as you want
  • Below are 2 sections, VLAN and added interface, add the interfaces to the port

  The SX200 switch, you will need to assign a port as a vlan native containing the tag VLAN untagged and all others.

  • Connect the SX200 and access management of VLANS
  • Create the desired VLAN
  • Access the belonging to a VLAN ports, change the proposed port connect to the RPS, use the arrow on the slide to add the VLAN to the port as members marked

  * Ensure that connection ports are port trunk allowed several VLANS to be set on the link. An access port allows 1 membership alone a VLAN.

  Hi Andrew! You me before I can submit

  -Tom

  Post edited by: Thomas Watts

• Connect with RVS4000 WRT110

  I have a problem when you try to connect the WRT110 with the RVS4000.

  The problem is that devices connected on the gift of the WRT110 obtain an IP address and cannot connect on the computer connected to the RVS400.

  My setup is the RVS4000 as a gateway and DHCP active. the wrt110 is the secondary router that will be used to access wireless and wired switch.

  devices connected on the wrt110 occurred (Popcorn Hour) media center units

  on the wrt110 I tryied different configurations to see if I can make it work. LAN to Lan connection. (with dhcp and NAT Protocol on the disabled wrt110) and

  with Lan to Wan connection (affecting an ip address static DNS and gateway wrt110 and dhcp and nat disabled)

  I ping the wrt110 from computer connected on the rvs4000 and vice versa, but I cannot ping devices connected on the wrt110

  I think 2 scenarios that could affect. The routing table of the wrt110 declares 192.168.1.0 with gateway 192.168.1.5 ips (which is the IP wrt110) can change on 192.168.1.1 which is the rvs4000 with the dhcp server?

  All wiring passed it must be somewhere in the connection?

  Thanks in advance

  You cannot change the ports on the switch N ° the WRT. They are always auto-detection. It seems that negotiation does not work with your media device.

  Options:

  1. connect the device to support to the RVS4000.
  2. find a switch with which the media device negotiate correctly.
  3. get a (expensive) managed switch and set the connection port that you need.

  Of course, remember the speed control lower the appliance becomes slower. It depends on how fast the device media is supposed to be and what nic ethernet is integrated.

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Belkin router is not compatible with el capitan

  Installed El Capitan on my Mac mini and received a message that is not compatible with the belkin software, so he put this software in a different folder, and I had to plug the ethernet cable from the router for mac that allows you to keep my internet. How can I get my wireless back function?

  ~ Chris4life

  What is the purpose of this software from Belkin?

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye