Router1841 mpls communication config

Similar Questions

• Linking rising switch config - Communication between them

  I'll install UCS with two Catalyst switches (3560 and 3750G). Make a channel of port pair-bond between them? It is a requirement for communication in the workplace?

  To connect the port-channel coming from the FIs to each of two switches? Or I can cable two links to the same uplink switch?

  Plase answer quickly because I am short on time...

  Post edited by: Atle Dale

  Hi Atle,

  Yes we need a l2 of common platforms for VLAN set them on the UCS, as the two FI create two different fabrics (A & B) and all traffic on the blade on B A and vice versa should be settled by the switches upstream. If you do not have a common upper the 3560 and 3750 the then you need to have a link between the two switches. Make sure that enable the VLAN (set on ucs and others if necessary) on these ports but also to ensure that the protocols spanning-tree does not block the.

  I'm not very sure of your second question, but on what I understand:

  (1) If you have several links will even pass his favorite to put in a purchase order

  (2) given that these switches are different and not in a VSS, you need seprate in. for each switch.

  I hope this helps!

  . / Afonso

• communication between the spring and cache-config

  Hello
  
  I have the following definition in one of the plans.
  

  <distributed-scheme>
       <scheme-name>data_distributed</scheme-name>
       <service-name>DistributedDataCache</service-name>
       <listener>
            <class-scheme>
                 <class-name>spring-bean:AbcMapTriggerListener
                 </class-name>
            </class-scheme>
       </listener>
       <backing-map-scheme>
            <local-scheme>
                 <listener>
                      <class-scheme>
                           <class-name>
                                a.b.c.AbcBackingMapListener
                           </class-name>
                           <init-params>
                                <init-param>
                                     <param-type>com.tangosol.net.BackingMapManagerContext
                                     </param-type>
                                     <param-value>{manager-context}</param-value>
                                </init-param>
                           </init-params>
                      </class-scheme>
                 </listener>
            </local-scheme>
       </backing-map-scheme>
       <backup-count>0</backup-count>
       <autostart>true</autostart>
  </distributed-scheme>

  I'll need to get the AbcBackingMapListener initialized with another reference to cache and some custom objects. How can I pass these references to the manufacturer (or by using the set accessors)?
  
  I tried to use < class-system > inside the < param-value > element, but that has not worked.
  

  <param-value>
       <class-scheme>
            <class-name>spring-bean:CustomObject
            </class-name>
       </class-scheme>
  </param-value>

  Any suggestion would be appreciated.

  Hi magali,.

  To use another program like an init-param, you should use a plan-Ref as described here in the macro documentation settings section:
  http://download.Oracle.com/docs/CD/E18686_01/CoH.37/e18677/cache_config.htm#BABHCCHI

  
      data_distributed
      DistributedDataCache
      
          
              spring-bean:AbcMapTriggerListener
          
      
      
          
              
                  
                      
                          a.b.c.AbcBackingMapListener
                      
                      
                          
                              com.tangosol.net.BackingMapManagerContext
                              {manager-context}
                          
                          
                          
                              {scheme-ref}
                              custom-object-scheme
                          
                          
                          
                              {cache-ref}
                              anotherCache
                          
                      
                  
              
          
      
      0
      true
  
  
  
      custom-object-scheme
      spring-bean:CustomObject
  
  

  It works very well, we use it for sources of data in the cache stores and also create the ContinuousQueryCaches via the config cache.

  JK

• DMVPN versus MPLS

  Hello world

  An interesting question for the community.

  If a router is configured with a DMVPN (or simply a VPN) tunnel and at the same time has an ethernet MPLS even remote desktop connection which route is a priority and why?

  Thank you

  Tom

  Hello

  the link I provided above described the idea how this is possible, if you are looking for the MPLS cloud and cloud DMVPN using EIGRP, then I suggest you do the following

  in each router configure two EIGRP (AS) autonomous systems to be used on MPLS and the other to be used on DMVPN and follow the recommendations below

  -to advertise networks in each AS EIGRP that should be available through (assuming that the same networks will be announced on both)

  -do not redistribute between these two EIGRP AS

  -use EIGRP offset-list of roads through the DMVPN tunnel interface make which the metric is higher and less preferred see below link to eigrp offset-list configuration

  http://www.Cisco.com/en/us/Tech/tk365/technologies_tech_note09186a00800c2d96.shtml#modifycompositemetric

  -You can use other methods other than delay llike ofset-list

  for the other config design and recommendations please refer to the example of design in the previous post

  If have any question just after her here

  HTH

  pls note the useful messages

• LAN to LAN VPN by MPLS

  

  We have 2 sites HQ and remote connected with MPLS as pictured above. There are applications in the DMZ s who need to talk to each other, but the communication goes through the remote local network (DMZ - LAN HQ - HQ DMZ) but we do not want the DMZ to communicate with each other via the local network. We want to configure a VPN tunnel between Headquarters and remote Firewalls so that all communications between the DMZ through a VPN MPLS tunnel via the LAN. Is this considered a Layer2 VPN or Layer 3 VPN model and also is there a special setup that needs to be done other than config normal site-to-site VPN Firewall.

  Thank you

  This is the layer 3 VPN and no special configuration required on the firewall other than the normal site-to-site VPN. Just activate the isakmp and apply crypto map to the LAN interface.

• BitComet Logitech, Garmin addons did not appear in topic: solution config

  I have different modules - BitCometAgent, Garmin Communicator, Java (tm) platform, SE6 (2 entries), detection of the Logitech devices. None of these can be removed by your answer about: config.

  Is there another way?

  You can try opening the pluginreg.dat file in the Firefox profile folder to see if it gives the location of the blocked or installed plugins that you want to remove.

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• HP P1102W HTML Config does not

  ••• REPOST! STILL NOT RESOLVED! •••

  PRINTER: HP P1102W

  COMPUTER: MACBOOK PRO (2014)

  TOPIC: CONFIG HTML DOES NOT OPEN

  We recently got a new wireless network and I need to update my printer to reflect the change. However, when I go into the printer utility then HTML Config, nothing happens! Nothing opens at all. Just, the window closes and goes back to the original window.

  I read several other forums on the same issue, but can't seem to find one with a solution.

  Help!

  Thank you

  Shelby

  Thanks for providing this information ShelbyB.

  You use 10.9?

  IPv4 address is 0.0.0.0, it does not connect.

  Restore the default settings of the printer again.

  You may need to remove and add the driver back again USB printers and Scanners to get the HTML code to open again.

  Check your network encryption to make sure that the type of encryption and password are correct.

  If there is a space or a special character in the password, it not be recognized.

  To check the network password follow these steps:
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, double-click the name of the network,
  Check the show the password box, type your Mac password to see.

  (some networks have a password shortcut configuration)

  To check the encryption type:
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, on the left side, click on passwords, double-click the name of the network, check the show the password box, type your Mac password to see.

  When you enter your information on the part of the printer, under the Mode of Communication, Web Server Infrastructure-click, select your network SSID from the list of available network names (SSID), and then click on the < < button. (update) In the Safe Mode pop-up menu, under authentication, click WEP or WPA/WPA2. Your selection depends on which wireless security protocol used by your network, make sure you select Alpha or hexadecimal, they apply the settings.

  Print a Configuration page to see if you now get an IPV4 address. Then add the printer as Hello P1102w printer.

  Test the printer.

  Let me know the results.

  Thank you.

• Communication issues and windows Wireless.

  Hello

  Please how can I switch on my communication wireless in the Config Free?
  Mine offers a solution (c1), but I put t know what he meant by c1 and how do I install IIS on my windows, I got a Xp home edition?
  I tried formatting and installing Xp Pro, but I couldn't t.
  Please can someone help me with this problem?

  Then another thing: I like mine, processor Intel Celeron M 1.6GHz and 512 MB, 40 GB.
  If you like what the best level and the highest upgrade, I can give this laptop to improve performance because I intend to run a web server and server of internet mapping to this topic?

  Thank you very much.

  The wireless is enabled by moving a switch located on the side of the laptop, your laptop is "active wifi. Some Toshiba models are not active wifi even if they switch to check the manual and specifications of your laptop.

  Once you have activated the following switch you will have to setup a connection you have a router or access point wireless. Create a new connection with the Network Wizard, scan the airwaves for your network (SSID) and enter any password (WEP) security you have enabled. After that your wireless connection should stay relatively automatic whenever you log in and log out of Windows :)

  Richard S.

• Impossible communication with an electronic card via the USB port of the United Nations

  Hello

  I must communicate with a normal electronic card a mini-USB port / USB (serial, COM4). This card transmits on the airwaves on a frequency range that I must address.

  When I plug, the PC detects it and accept it (I installed the driver). Plug-in the HyperTerminal in Windows XP to send instructions in hexadecimal this carte pour what change the range of frequency on which it issues.

  Furthermore, neither MAX nor Agilent Connection Wizard not the detected and none are able to communicate with it, everytime the same message error "no device detected".

  I tried under LabView to send instructions with assistant IIOA, no results. I also tried the instructions 'Config VISA' and 'Entry VISA', trying to write in hexadecimal and normal mode, nothing works. Under labView I have yet no error message, nothing. Nothing.

  I don't understand. I know that it is still possible to drive it under LabWindows, but under LabView (8.5) nothing, not a clue.

  I have the latest version OR-488. 2

  Y ' have a procedure to follow pour such communication of?

  Thanks for any help that would be welcome.

  Kind regards

  Zoe.

  Hello

  The NOR-488 driver. 2 is the driver for the hardware from National Instruments GPIB; If you communicate to the port of of a USB through, this will not impact your code or on the resources used. The only element in common with your VISA application EST enhancement. It provides a unified API pour different types interface with instruments (series, Ethernet, GPIB, VXI, etc...).

  Under MAX, on cannot hole your communication card, only the serial port. The first chose to do is therefore to ensure that the serial port 4 is clearly visible under MAX. You can then the uti Test Pannel VISA pour send and/or receive orders to/from your card.

  If these elements do not allow you to properly configure your hardware, n 'hesitate to send a capture d' screen of the configuration under MAX. If you have a CVI code that allows you to interact with the map, it might be interesting to join, so you can see how interactions with the material are made.

  Kind regards

• Backup turns out defective Windows\system32\config ('file crypto') causing an error?

  How can I get around the backup failed due to the Windows\System32\config\systemprofile with error code 80246005? It seems that all the other files have backup OK.  Is there a method to have the backup ignore this file, if it is not important?

  Hi, Andy Smith_859,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, looks like you are facing a problem when running windows backup.

  He would be grateful if you can answer this question in order to help you further.

  What version of the Windows operating system is installed on your computer?

  Windows\system32\config ("crypto file") this file is mainly to update windows, I suggest you to check if the cryptographic service is running.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click the name column header to sort the names in reverse order. Find the Windows Update service. Note the selection state (the status appears in the third column). Right-click Windows Update, and then do one of the following:

  If Start is available, click Start.

  If the restart is available, click on restart.

  d. click the name column header to sort the names in alphabetical order and then click Cryptographic Services.

  Note the selection state (the status appears in the third column). Click Cryptographic Services, and then do one of the following: (If Start is available, click Start. If the restart is available, click on restart.)

  e. close the Services dialog box, and then try to perform a backup of the system.

  I suggest to perform a clean boot and disable the security software and then try to run windows Backup and check if it helps.

  Clean boot:

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve problems using the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once the diagnosis has been made, make sure that you try to step 3 of the article to reset the computer as usual

  Disable the security software:

  Disable security software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software

  Note: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Config Audio y Sonido

  Por favor Necesito UN Ayuda! Problema de config from Audio y Sonido.Gracias.Nora.

  Hello

  You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.

  Thank you.

  Translation of Bing above:

  Hola

  Han pedido knew pregunta en version in English of the Microsoft Community. Please select su idioma preferido, c, haga click in el boton "cambio Región" in the lower part the pantalla izquierda. Ahora pedir pregunta, otra vez.

  Gracias.

• TDMS &amp; comparison of Config files

  Hello

  I'm not really new to the community, because I got a lot of queries that have already been asked before, and I found an answer here, so far. I studied up on top of TDMS (file > Group > Channel) and its conceptual hierarchy seems to be very similar to the configuration files (file > Section > key). Now, I think that it is possible to use the model TDMS for both configuration files apart from measurement results, but I thought I should ask...

  What are the advantages and disadvantages of TDMS Config files (*.ini) vs?

  I have not found so far any form of comparison between the two. I would like to personally exempt accessibility Notepad the file of configuration as a benefit because it would be best to restrict access to the system from unauthorized users settings.

  Yes, I would consider even using PDM to store key/value data because it is designed for streaming time series of data on the disk.

  I think that if you want the human readable config files then INI files are the way to go - especially with some functions in the MGI toolboxes for read/write anything (for example, the clusters as sections) in an INI file.

  If you want to protect the config file then I think I would probably recommend some kind of binary file format - probably something like a SQLite database like that lets you easily look up values. If you want to go further - place the file in a hidden place (for example % ProgramData %) and making a sort of reversible encryption of the file content would help protect content against unauthorized viewing/changes.

  By experience, using the read/write of MGI what it functions of INI files have been the best solution, we have developed with until we decide to consider using a SQLite database. Teh that if you Exchange cluster configuration, he manages to read the fields that are present and uses the default values that you specify if they are not done it is handy when you need to change the cluster in a future version. Certainly flatten LabVIEW functions XML don't do this - if the definition of type changes then I think it returns an error.

• Error c:\config.sys\77803.rbf and error 7370 when installin Apps in Windows Vista.

  Original title: cannot install applications on windows vista home edition - error writing to file c:\config.sys\77803.rbf, error 7370

  I have windows vista home edition. When I try to uninstall some games or other applications that I don't have, I get an error saying "error writing to the file c:\config.sys\77803.rbf, 7370 error. Can you help me on this

  Hi Robert,.

  Welcome and thank you for the post about Microsoft Community.

  It seems that you are unable to install games on Windows Vista that you found the error.

  Please provide me with the following information.

  (1) you get this error during installation or uninstalling of an application or a game?
  (2) with what game do you meet these question?
  (3) you get the same error with all games?

  Please follow the troubleshooting steps listed here.

  Method 1: Run the fix it given in the link here and try to install the game.

  Automatically fix problems of installation of program installation or remove program fails because of the installation blocked or corrupted registry keys.

  http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

  For reference, please see the following link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program

  Search for the question, if it persists, then pass to the next method.

  Method 2: Turn the computer in clean boot and try to uninstall or install the game.

  Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

  See this link:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. See step 3 of this link.

  Method 3: Run Microsoft Safety Scanner.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.

  I hope that solves your problem, please write to us if you have any other issue of Microsoft related to Windows.

• Impossible to update iTunes, error: error writing to file C:\Config.Msi\4de64c3.rbf check that you have access to this directory

  Original title: I can't update iTunes for the life of me!

  I get "Error writing to file C:\Config.Msi\4de64c3.rbf check that you have access to this directory"

  I just bought an iPad and wanted to put pics on it from my PC. It must be through iTunes 10.6.3 or later version. I'm completely frustrated by this. I was not able to update my iTunes in months.

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Access Point WRT1900AC &amp; Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode