Routes IPP deleted

Similar Questions

• Route orders for Cisco VCS

  Hello

  We have deployed a VCS Expressway Starterpack with dual NIC

  We followed the deployment guide on how to deploy dual NIC and works very well.

  We find difficult on the way to show the roads that have been set up and also how to remove roads on the VCS.

  What are the specific commands for these?

  Thank you for your support in advance.

  Best regards

  Acevirgil Ocampo

  I checked and did not configure find a way to see what roads are currently, only the ability to add or delete, unless it is under a different command or user interface somewhere.

  xCommand RouteAdd

  «Add and configure a new IP route (also known as a static route).»
  Address (r): 'specifies an IP address that is used in conjunction with the prefix length to determine the network to which applies this road."
  PrefixLength (r): <1..128>'specifies the number of bits of the IP address that must match when determining the network for this route. Default: 32 "
  Gateway (r): 'specifies the IP address of the gateway for this route."
  Interface: "specifies the LAN interface to use for this route. Auto: VCS will select the interface most appropriate to use. "Default: Auto".

  xCommand RouteDelete

  "Deletes a route."
  RouteId (r): <1..50>"The index of the route to delete."

• Connection of a fall Dell Mini WRT110

  In my house, we have the main PC and a Vontage device connected to my router which is a WRT110. I can easily connect my Toshiba laptop and everything works. The question is as soon as my wife logs on his Dell Mini to the router, it deletes everything.  If I turn off the PC at home and my laptop so that it can connect to his Mini.  The Mini running Windows 7 and has all the updates.

  So, the configuration that I use on the router is as follows:

  MTU 1350

  Unique SSID

  Network mode is mixed

  Standard 20 MHz channel band radio

  Channel 11-2, 462 GHz standard

  The security mode is WPA2 Personal

  Beacon interval 50

  Fragmentation threshold 2304

  RTS threshold 2304

  If there is someone who might be able to help with this situation, I would be very happy, because this is starting to annoy me.

  Thank you

  What version of firmware you are running on the router...?

  Try to reflash/upgrade of the firmware on the router and reconfigure the router from scratch. You can download the firmware from www.linksys.com/downloads.

• OfficeJet Pro 8600 Plus: HP Officejet Pro 8600 Plus - Can no longer print with my Mac

  I have been using a printer HP Officejet Pro 8600 Plus via my MacBook Pro (OS X Yosemite version 10.10.4) for about two years with no problems until recently.  Since a few days ago, I'm more able to print wireless, despite the fact that the printer is connected to the network.  Interestingly, the print queue reflects the print job completed, but pages do not print.  In my attempts to solve the problem, I have (i) restore factory settings and re-written information of network required on the printer; (ii) disconnected the printer and waited five minutes;  (iii) unplugged and reset the router. (iv) deleted and reinstalled the software and drivers printer on my laptop.  My laptop is in communication with the printer as evidenced by my ability to scan using HP Scan wireless, but I'm unable to print the document once it is scanned.  Finally, I am able to print the network settings Page in the menu of the printer, but not the printer web page... I get an error message saying 'the printer is busy. Try again later.  Any ideas to fix this frustrating problem would be greatly appreciated.  I apologize if my descriptions are not technically accurate because I am a novice when it comes to computers and networks.  Thanks a lot for your help.

  Thank you for your response and suggestions. I really appreciate it.  You beat me to the punch... only a few hours ago, I was able to get the printer working again... but I forgot to update my post.  As you recommended, I have reset the printing system, downloaded a new driver... hpprinterdriver3.1.dmg... added a new printer... restart the printer, my router and my laptop... and the printer from work once again from my Mac.  Yet once again, I appreciate your efforts... Bravo.

• BlackBerry 9900 Smartphone wifi Advisor

  My wifi shows my "saved" network It shows a green wifi sign and a lock. As soon as I try to connect, I get the message "unable to authenticate to the network. Handset is a 9900. I am trying to connect to the voice of bbm. Please notify. Thanx

  The usual troubleshooting techniques are to restart your Wi - Fi router then delete your saved home Wi - Fi network on your phone then re-add.

  Try and let us know if you succeed in the connection.

• désélectionnera not Photoshop elements

  I'm not low on memory, but on both of my laptops Mac (pro and air) when I move an object, it continues to move with the beach ball will. THERE IS NO WAY TO DESELECT.

  It is as I have more memory and move to the right on the screen and off the file. I can't stop it. I tried to move manually the object with click by click with additional cursor moves, but it takes FOREVER. I have used PS elements for ten years and do graphic design for a living. So it kills me. Until this started past D option deselected. Help, please

  Martha Rosenberg

  What type of program you are using Photoshop Elements or Premiere Elements? Option D sounds like Photoshop elements Mac. If this is the case, you have posted your thread in the wrong forum. Some how your son got posted in the Forum Adobe Premiere elements (video editing).

  If it is as I suspect, please re-post your thread in the Forum of Adobe Photoshop elements to take advantage of the expertise, it. Photoshop Elements

  There seems little things I can tell you here if you have worked with Photoshop Elements products for 10 years. Did you take the classic route of deleting the file settings for the editor of Photoshop Elements? You are talking about

  When I move an object, it continues to move with the beach ball will. THERE IS NO WAY TO DESELECT.

  If your son could be on track movement in a video presentation of Premiere Elements, then specify here

  so that we can find the solution. Even if I take it as a matter of Photoshop Elements, clarification is required on your program and what you do. It seems to get the message about it deselect in Photoshop elements editor does not work, but I'm not sure of the surrounding details. If it wasn't for another of your coordinates, I'd say you've had a commitment pending (text or other) that is prevention, that you seem to seek the removal of a selection.

  Thank you.

  RTA

• insert into the summary table of the table.

  I was wondering if there is a smart way to do it with SQL, but I'm not sure. I would like to consult you yo guys.
  
  I have a table like this

   CREATE TABLE "TEMPLE_FINANCE"."TEST" 
     (     "COLUMN1" VARCHAR2(10 BYTE), 
       "COLUMN2" VARCHAR2(10 BYTE), 
       "COLUMN3" VARCHAR2(10 BYTE), 
       "COLUMN4" VARCHAR2(10 BYTE)
     ) ;
  
  
  Insert into TEST (COLUMN1,COLUMN2,COLUMN3,COLUMN4) values ('1','2','50.00',null);
  Insert into TEST (COLUMN1,COLUMN2,COLUMN3,COLUMN4) values ('1','2','50.00',null);

  I would like to at the rate of an update and you end up with

  "COLUMN1"     "COLUMN2"     "COLUMN3"     "COLUMN4"
  "1"                  "2"          "100.00"     

  What update statement can run for this?
  I would enter in the summary of the lines based on the column 1 and column2 and get rid of repeative lines.
  I have try this insert statement, but it's bascially just adding an extra record in the table.
  

  INSERT INTO  TEST (SELECT COLUMN1, COLUMN2, SUM(COLUMN3), COLUMN4 FROM TEST GROUP BY COLUMN1, COLUMN2,COLUMN4);

  any help would be grateful.
  
  Published by: mlov83 on January 25, 2013 12:45
  
  Published by: mlov83 on January 25, 2013 13:03

  Hello

  I can't help but wonder if you have the best design of table for what it is, you need to do.

  The best solution would be to create a new table, using the SUM (TO_NUMBER (Column3)) and GROUP BY, and then delete the original table and rename a new one to the old name. While you're at it, change Column3 as a NUMBER and add a primary key.

  In collaboration with just the existing table, INSERT one won't work. INSERT always adds new lines. You want something that can INSERT new lines (or update some existing routes) and DELETE lines at the same time. FUSION can do it all. Here's a way to use the MERGE:

  MERGE INTO     test     dst
  USING   (
            SELECT column1, column2, column4
            ,      SUM (TO_NUMBER (column3))
                               OVER (PARTITION BY  column1, column2, column4)
                              AS column3_total
            ,      ROWID             AS r_id
            ,      MIN (ROWID) OVER (PARTITION BY  column1, column2, column4)
                                        AS min_r_id
            FROM    test
       )          src
  ON     (src.r_id     = dst.ROWID)
  WHEN MATCHED THEN UPDATE
  SET     dst.column3       = TO_CHAR ( src.column3_total
                              , 'FM9999999.00'
                          )
  DELETE
  WHERE     src.r_id     != src.min_r_id
  ;
  

  Published by: Frank Kulash on January 25, 2013 16:07

• Delete comments off router

  How can I delete comments off wireless router?

  What "guest"? Someone who steals your service? You must secure and password protect the router. If this isn't what you're asking:

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

  I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

  At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
  I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
  , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
  (a # 169 instead of a # 192)
  In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
  'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
  Results: connection Test
  Test details:

  I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

  X "Ping 0.0.0.0 Gateway: failure.
  !  "No DNS server is available for this connection.
  ! "No WINS server is available for this computer.
  X "Ping 0.0.0.0 network: failure.
  ------------------- -------------------------------------------------------------------------------------------------------------
  In this same window of diagnostics under the "LinksTab".
  Link current test status: (what is determine the current connection speed of the adapter and link partner)
  Results:
  ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

  The best link options-results of the speed test:
  ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
  (Note that these link tests are online and I can't online)

  Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
  Depending on the tab is the Hardware tab
  Hardware diagnostics check for I/O conflicts...
  Results: all the tests:
  EEPROM test
  FIFO test
  Test register
  Interruption of the tests
  Loopback test

  I also went in the prompt type in IPCONFIG... c which shows:
  Ethernet connection to the Local network card:
  ConnectionSpecific DNS suffix: (it's completely empty here)
  Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
  Autoconfiguration IPv4 address: 169.254.160.220
  Subnet mask: 255.255.0.0
  Default Gateway: 0.0.0.0

  I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

  I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

  I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
  Thank you!

  Hello
   
  We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.
  
  Open the destination folder where the files are extracted and run the Setup file to complete the installation.
   
  To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
   
  For more information on downloading and installing the drivers, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware
   
  I hope this helps.
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• BEFSX41 router will not let me delete the DNS entries

  I'm trying to set up a BEFSX41 router that lies behind a cable modem Motorola SB 5120.
  Somehow it now shows the DNS entries in the basic configuration page. Comcast advises me to zero all these entries. When I make the attempt, a message appears saying the entry is not valid, and when I close the entrance warning comes back. The router is configured to obtain its IP address automatically of the SB 5120. This could be the cause of this behavior?

  I suggest that reset you your router and reconfigure all your router settings from scratch, reset your router should solve your problem.

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

• I can't delete the properties of the proxy server on my HP G60 Windows Vista laptop. Need help to access my wireless router.

  I'd appreciate any help or information that may help me set my Internet Options on my IE LAN settings. The configuration that I need to adjust consists of set the network settings on Auto instead of the designated inputs.

  Hi JoseGarza,

  You can follow these links to configure the wireless router & check if it helps.

  Set up a wireless router

  Setting up a wireless network

  Hope the helps of information.
  Please post back and we do know.

• PIX 515 - deleting static routes

  We all have a few static routes that we change the IP addresses on. We emit static (inside, outside) order No., but seems we have to reboot the pix after the change is made so that it can use the new static IP route to the external interface. Y at - it a command that does it, so we do not have to restart the pix?

  clear xlate

• How to remove a password from a router have not used in like 4 years should be able to delete the password or reset it if I can put something new on it

  I have not used in like 4 years must either be able to clear the password or reset it if I can put something new on it. try to get the password required to connect to the web on a new device and can not remember the password I want to erase the password he please someone help me!

  Is what kind of router? Most routers have a reset on the back of them, you'll need something like a paper clip or pen to press the button. Basically you hold down the button for like 10 seconds, and all the lights start flashing, when this happens, you can stop it by pressing the button. When everything goes back to normal, we must reset factory default mind. The default ip address is usually 192.168.0.1 or 192.168.1.1, the username is usually admin and the password is password. Sometimes these are the admin admin, or admin without password, or no username and admin or password for the password. However it may be something completely different. If you have the make and model, I can tell you with certainty what it is :D

• Re - routing of URL to delete?

  Hey guys.  I have NOT seen my URL to be Hance was FINAL with a time of only 1 change option til after clicking on the button 'send'... and then... it was too late.

  * Face palm * (repeat).

  The head on the desk...

  OK, if I delete the account all together, wait a few days, then arrives as I never had account it will work to get a different URL name?  Or some gremlin in the background sees the fact and said "' oh, your back!" and gives me the URL I didn't enter? "

  Think I'll have a bowl of ice cream now * pout *.

  Thanks for the help!

  Hey! Write to help.behance.net and we can help you

• the router CD could then tried to delete, but cd disappeared in HPslimline 1020. Help please! Thank you

  Help me get back the unit CDs. Thanks for all suggestions

  "The upgrade & Service" manual here shows how to remove the side panel:

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?CC=US&DLC=en&lang=en&LC=en&Product=5097981&Task= &