Routine Photosmart 5524 alignment every time I turn on

Similar Questions

• Form diagnosis of prints every time I turn on the printer.

  I recently put in a new cartridge black ink (HP product) and every time I turn on my printer prints a diagnostic sheet - this is the first time that this has happened and I used the printer for about 4 years. Thanks for any help.

  OK, the Photosmart C3180 see the troubleshooting here page.

• resolution problem with my monitor every time I turn on

  I have a monitor to display wide w1907 h p on nvidia gforce7050/nvidia nforce 6101.2 weeks I had restore the desktop pc top of page back to default settings since then every time I turn on the screen starts to the resolution of the game and then after a few seconds, it turns into the resolution.i minimum re on this return to the recommended resolution and it stops on this setting until I have put it off and then when I use the PC again I have to repeat the process thanks t..

  Hi Tony,.

  Have you checked that you have the correct nvidia gforce drivers installed from the manufacturers Web site?
  This problem may appear when you have a general driver for the graphics card.

  You could try reinstalling the drivers for the graphics card because it could have been corrupted somehow when return you to the default settings.

  Kind regards

  Joel

• I have a new Omni. Can I put it, so I did not type my password every time I turn it on?

  I have a new Omni.  Can I put it, so I did not type my password every time I turn it on?

  If there is an option to check that I missed.

  If you go to user accounts, you can change the password. Create no password in the new password just press ENTER to block.

• XP installation update every time I turn the computer off.

  I don't know what happens, whenever I turned off my PC (running Windows XP Home Edition, Version 2002, SP3) for the last week or so, it is said that it will install an update, if I disable normally.  I mean, click the button, it installs and turns off, and then the next time that I turn it off, it happens again.  1 update every time, I let it run all along, just as I always before.

  Teepet,

  Please download and save the Fixit on this page - How to reset the Windows Update components?
  Once the download is complete, close all open programs and browsers.
  Now run MicrosoftFixit50202.msi and choose it's default mode.

  When the Fixit has finished, open automatic updates in Control Panel. Do not restart the system, but even if you have been invited to.
  Set the update option for " download updates for me, but let me choose when to install them ." Click on apply, then OK.
  Close the automatic updates.
  Reboot the system now.

  Doing the above will force the automatic updates to download all the updates that are missing.
  When the Update icon, click it.
  Please note that updates are available and their numbers of KB.
  Close the window.
  For now, do installation No updates until what you have posted to those to whom they are.

  Expert MowGreen Windows IT Pro - consumer safety

• PSC 1350 all prints a test page every time when turned on

  After changing the cartridge, we printed test page.

  Now, whenever we turn on the printer it prints test page automatically.

  How to disable this option?

  Thank you

  Hello vancat,

  If your problem is that your PSC 1350 prints a test page when it is turned on or after every printjob, it is very likely because the cartridge alignment process is not finished. After you have installed a new cartridge in the printer, it will print an alignment page. You must take this page and place it on the scanner glass (make sure that the top of the page is in a good way), then you press the "Scan" button on the printer itself. It will scan the page (that is, read the page) and full alignment process (so it is not scanning in the sense that it sends an image to the computer).

  I hope that clarifies the process of alignment slightly.

• What would make my firewall turn off for a few minutes every time I turn on the computer.

  Whenever I turn on my laptop, the red icon shows in the task bar telling me that the windows firewall is disabled. I click on the ball and at the time that Security Center opens the firewall is turned back on. Anyone know why this is happening?

  I appreciate all help. Thank you

  Hi SuePerry,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can run the fix it from the link below and check if it helps.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us?EntryPoint=lightbox

  Method 2: If the method above does not help, then you can refer to the following Microsoft Knowledge Base article and check.

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

  http://support.Microsoft.com/kb/914230

   

  Note: The firewall is software or hardware that checks information coming from the Internet or a network. Firewall blocks some information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  Let us know if it helps.

• IM in Firefox on Windows and every time I turn off my concection my Firefox home page internet loses its settings.

  I have reset Firefox several times but each time I have shut down my computer or disable the internet connection, the problem recurs. When I open Firefox, the search bar on the upper right side of the screen has Amazon.co.uk and the Firefox search bar in the middle of the screen has no search engine and Im unable to use it for research.

  I typed in browser.search.defaultenginename

   and it found
  

  Browser.Search.defaultenginename; Google
  
  Browser.Search.defaultenginename, S; Google
  
  SweetIM. ToolBar.Previous.Browser.Search.defaultenginename; Google

  I changed all 3 to Google and now everything works fine. Thank you for your help

• My computer every time I turn it on. Help of violet and yellow-green.

  Whenever I turn on my computer, it is green and yellow purple.  When I go facebook can help you

  Either it's a problem with the video card or the monitor. Whatever it is, we can not help you.

  Perhaps, take it to a reputable dealer to have it checked.

• 2013 AVG pc tune up continues to check disk every time I turn on the computer.

  Original title: disable disk check

  I downloaded avg 2013 pc tune up and he recommended I do I drive control since it had never been done, but now it does everytime I turn on my computer... How can I stop it...

  How to temporarily disable AVG components.

  http://forums.Avg.com/ww-en/AVG-forums?sec=thread&Act=show&ID=88501

• HP has stopped working every time I turn on my computer laptop back

  My HP Wizard stops working whenever I turn off my laptop, I turn and I had to wait 11 minutes so he could start working, then my broadband reports kicking in. Any ideas please. Thank you.

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant by opening windows control panel, open programs and features, make the entry for HP Support Assistant right click and select uninstall.  Once this process is complete, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html#.Ujd1blP9Xh4

• Windows Installer is trying to install callery photo 3 times every time I turn on my PC. How can I get this to stop?

  Any ideas?

  Hello

  ·        Photo Gallery is installed on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest you stop photo library to be installed on the system.

  To stop it trying to install:

  a. to start the configuration system (msconfig) utility:

  b. Click Start and type msconfig in the box start the search.

  (c) in section programs, click Msconfig.exe.

  On the Startup tab, you will find photo gallery that keeps trying to start and uncheck the box next to it. It comes out the startup so it will run each time Windows starts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 2:

  Maybe it's that the application is not correctly installed on the system and this is the reason why you get the message when the system boots. I suggest you to check if the photo gallery is installed on the system, if it is not installed on the system, then, I suggest to install on the system and check if the problem is resolved.

  How to add components and programs to a Windows XP computer

  http://support.Microsoft.com/kb/305548

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No communication between the printer and the Red computer on switch flashing printer does on every time I turn it off

  I get a message there is no communication between the printer and the computer. Printer is all-in-one HP Officejet 4315v. Have uninstalled and reinstall the software and unplug the USB port and plug it back. Repeated several times. Still no communication. Exclamation red light next to 'on' and green button 'on' butter is flashing all the time.

  You have a hardware failure of the printer.  Contact the manufacturer for support.

• Why is windows defender stopped every time I turn on my compurtrer

  Defend Windows is turned off when I start my compurter and sometimes even if I'm on it, I'm so constqntly again.

  WHY?

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• How to eliminate the upcoming welcome screen every time pc turned on?

  Hello once again;  It is not the screen projection I "M trying to eliminate, but logon screen it's self.   HP pavition HP - 1148p;    Windows 7 Home Edition premium you think for your time

  Hello

  Please keep your question on the same post otherwise very hard to follow. Please use the folliwng steps:

  http://pcsupport.about.com/od/Windows7/HT/auto-logon-Windows-7.htm

  Kind regards.