Roxio Creator OF 10.2 detects NO optical drive!

Similar Questions

• can not detect my optical drive

  Hello comrades,.

  Seems all of a sudden my laptop cannot detect my optical drive. When I try to 'My computer', it no longer displays G: (which is my optical drive), the rest of those who are still there.

  I found out about this when I pressed the EJECT button on my laptop because I wanted to put a DVD in to play. The car tried to RUN, I see the light is on, but after 30 seconds or so, the stopping of the car. and he can't play

  Indeed, it appears a sayings of notification:

  "cannot open trayof the optical drive, pleast try again to eject the drawer after closing all by using the software or shut down the system & then start the windows." If none of the above option works, insert a thin object / straight as paperclips into the hole of the manual on the SIDE of the disc.

  Well, I can press the SIDE button and open the drive to take out the DVD drive.

  Can someone tell me HOW to fix? I have ALREADY run the Malwarebytes and SuperAntiVirus scan in SafeMode two full sweep.

  Here are the specifications of my laptop:

  32 bit Vista Ultimate / 4 GB RAM / about 300 GB HARD drive

  MANY TAHNKS!

  1] you will find under Device Manager?
  is [2] detected in the BIOS?
  [3] make sure that the data cable is well fixed.

  Run the following application Fix - it: -.
  http://support.Microsoft.com/kb/314060

• lack of optical drives

  Device Manager and my computer can't detect my optical drives but present when starting

  Hello Brenda,.

  I suggest you follow the link below and run the fixit who will automatically diagnose this problem:

  http://support.Microsoft.com/kb/982116

  You can also do it manually, see the Windows XP section in the article to do it yourself.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Roxio Creator basic

  Roxio Creator Basic came bundled with my Pavilion s7720. I have improved the form of Vista to Windows 7 Home Premium, and now it does not work. I've deleted and reinstalled using the Recovery Manager. When I try to run I get and error message in a dialog (entitled Roxio Easy Media Creator) who says: "the certificate file is missing or damaged. Please reinstall. »

  grateful for any help.

  Solved my problem.

  Remove the "Sarlicense9.dat" file in the folder C:/ProgramData/Sonic and all is well. Program recreates the next time it runs.

• Can't install Roxio Creator Pro 2012

  I can't install the Roxio creator 2012 pro software, it keep back each time.

  Hello

  I suggest you try to run this fixit and check if it fhelps:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  It will be useful.

• Windows Update KB976902 causing problems with Roxio Creator

  I am not able to burn video to a DVD-R after Windows Update KB976902 installation (using Roxio Creator 2011).  I can burn video on CD - R no problem. It was not a problem until I installed this update. I can't do a system restore, the restore point will not go back to the date that I need. Any help would be greatly appreciated!

  Contact the Roxio Support.

  KB976902 is a prerequisite for Win7 SP1 update (expected soon). If KB976902 is not installed, SP1 will not be offered to the computer and you will be able to install it manually.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem installing Roxio Creator 2011 on new computer

  Hi, I'm a new Pavilion Phoenix h9 - 1150t with windows 7 64 bit. I install my old computer programs. I'm having a problem to install the Roxio Creator 2011 program. Installation crashes with a message "installation was interrupted. Alongside this, a pop-up box indicates "you must use the windows feature tour turn on or off in the control panel to install or configure .net Framework 3.5.SP1. I tried to install this program on and outside, with the same results. The installation progress bar hangs at "rollback .net framework 3.5.1. I spent last week in contact with the help of Roxio try all sorts of possible solutions and everything has resulted in the same system to a standstill. Does anyone have an idea what goes wrong with this installation? Thank you, John

  Hello

  The gurus are not official Support from Roxio, but they are most of the time people of goto.

• XP SP3 read the Roxio Creator 2011 drive - why not?

  I recently bought a Roxio Creator 2011 software but my system won't read disc. I checked that I meet the requirements for the program and everything works properly and I have all the updates for XP Pro. I went round and round with Roxio for several weeks. After I appealed to BBB, Roxio sent me a replacement drive, but Windows will not read it either. I am able to read/play all THE other drives I - except Roxio. They don't tell me why it does not work.

  Thank you
  Ed

  If they send you a dvd disc, it may be a problem with the dvd drive on your computer.

  You should check the home site of readers of dvd for updated drivers or the faq.

• Can't install Roxio Creator 2011

  Trying to install Roxio Creator2011 get half way and stops. Message says must install Roxio Creator 2011 before installation content.

  See the section "How to get help" of http://support.microsoft.com/kb/974417

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Can't install Roxio Creator SB

  Hello

  I have a thinkpad sl500 which has had it's changed motherboard, and had the model number "INVALID" but later rear fixed to the number on the label on the bottom. I upgraded to win7 and I can't install Roxio Creator SB on it, it gives "Setup has determined that your configuration doesn't support all included products.

  Can someone help me?

  Thanks in advance.

  Never mind, I used Orca t change all the MSI files (deleted the launch condition) and then installed one by one, using msiexec /i /qb

  Works like a charm.

• problems with re - install software roxio creator 9

  I had roxio creator 9 downloaded correctly, then a few weeks ago I started receiving messages that the certificate file is missing or damaged. not knowing exactly what it was just totally uninstalled the whole program i. now, I'm trying to re - install and when I put the CD key # I get a message telling me that it's a # invalid key. This is as I used the first time. What can I do to get there so I can get my software reinstalled. someone help me please! thanx

  Hello omgimsoconfused,

  Read the following Roxio article dealing with the key "not valid" error message.
  "Invalid CD Key" error when you reinstall Easy Media Creator 9
  Knowledge base article: 000116CR
  http://KB.Roxio.com/search.aspx?url=/content/KB/creator/000116CR¶ms

  If this does not help, then you should post in the forum of Roxio Creator.
  http://forums.support.Roxio.com/

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to load roxio creator 2011

  during the installation of roxio creator 2011 a window appears with the status message: "your product key could not be validated. Please try again "."  "in the log file it states: ' could not create and initialize the XML DOM with the error:-2147221164.

  I tried the support people at roxio without result... put in place the new admin acct, xml 4.0 update, etc.

  Roxio has a 30-day guarantee refund, return the product. In contrast to Roxio, Nero has a free trial version.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Special Roxio Creator 2009 Edition photo editing application has stopped working

  For some time I was not able to use the application (PhotoSuite) in my Roxio Creator 2009 Special Edition of photo editing.  Today, I checked other parts of creator and they seem to open correctly.  But PhotoSuite appears immediately a Windows error window that says it has stopped working and Windows is looking for a solution.  Of course, as always, they never fulfill the promise of advising me of such a solution.

  Fortunately, I have other photo-editing programs on Board that I can come back, but I'd like to have the option to return PhotoSuite.  I read a thread here about a 2012 creator set starts does not, but on mine, it's just the application of PhotoSuite that won't launch.  I checked the versions of the applications within Creator 2009, and the single fence was "PhotoSuite Launcher Plugin", version 4.5.3145.12514.

  Interestingly, when nine the same program was loaded on our old office 2002 XP and everything still starts and runs very well.  I have more global technical problems with the Vista laptop than the old Office XP;  It's just that the Office runs more slowly with loads of high-data of today.

  Of course this 'special edition' Costco is out of ephemeral warranty of Roxio/Sonic, now owned by Corel, I guess, so getting the help from them without doubt will be vain or expensive or both.  Is there a relatively simple fix, or what I need to remove and reinstall the application or all of 2009 since the disc Creator program?

  2008 Dell XPS 1530, Vista, service pack 2, 32-bit.

  Hello

  Restart the PC, when it is up and running turn all programs running out especially antivirus/firewall software... Put the f2010 program installation disc in the DVD drive and when the Installer offers repair, it is executed, when finished restart the PC. It's working now?

  If it still does not, uninstall all traces of the application using Revo Uninstaller in moderated mode.  Make sure that you back up your Windows registry database before running the uninstall program.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Reinstall using the guide listed here

  Corel has a forum of support and knowledge base.

  http://Corel.force.com/Roxio/rSelectProduct?lang=en_US

• Roxio Creator 2012 has stopped working and comes up with an error in the Visual C++ Runtime library.

  Original title: what is the number of the download version 03/03/2011 for Visual C++ 2010SP1 x 64 Redistributable?  It is newer than the 10.0.30319(x64)?

  Roxio Creator 2012 stopped running and comes up with an error in the Visual C++ Runtime library.

  Hello

  1. What is the exact full error message?

  2 is specific to the program the issue?

  3. you remember changes to the computer before the show?

   
  When was the update of Visual C++ 2010 installed and you can check the version in which it is most recent according to the installed update.
   
  Method 1:
  Install the latest version of Microsoft Visual C++ (x 64-bit) available at the following link.
  http://www.Microsoft.com/download/en/details.aspx?ID=14632
   
  Method 2:
  If the problem is specific to the program perform repair installation of Roxio for the following steps.
   
  (i) by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features, open programs and features.
   
  (II) select the program Roxio and then to change or repair a program, click on change or repair.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
   
  In addition, if the problem persists after the question in the following link
  http://forums.support.Roxio.com/Forum/300-installationuninstallationupdate/

• Roxio creator 6 will load no problem of compatibility. Help

  I am told to update to vista compatibility, but it seems to be up-to-date

  I have a lot of images in this format, and would therefore be unable to load roxio creator 6 on vista

  To install the installer in compatibility mode right click > properties > compatibility > select vista