RSA - ENC with EPII HW Accelerator

Similar Questions

• The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

  Yes, he does. I have the 980 and it works very well also.

• Performance is worse with the GPU acceleration that without

  I have a Windows 7 system fast, i7 980 X processor with a monitor @ 2560 x 1440 pixels. As a photographer, I'm processing of thousands of photos and my PC can not be fast enough, so I thought that I invest a little in a new graphics card. OK, I have not bought a Quadro, but with GTX 970 from Nvidia, I always feel a modern, fast, with a value of more than $ 400 map.

  My first experiences after the installation of the new graphics card are more then disappointing - a lot is worse, running without any GPU acceleration. Before, I could scroll an image to the image almost no imperceptible lag. With the GPU acceleration turned on, each image must be "rendered" first first you get a blurry picture of Pexelated / of complitely and flackers of color shortly, then after a while, it becomes more clear. So it seems that with GPU acceleration turned on, Lightroom 6 completely ignores the preview images pre-rendered - FACT IT MAKE any SENSE WHAT? Yes, all the sliders mode develop work faster, but the preview shown instantly image is a false low resolution and it always takes time for an image high resolution to display - as much time, as it should, making it with a CPU.

  For me, it would make sense that next image will be loaded into GPU memory by actually DURATION and rendering the previous image would be preserved in memory as well. Also miss me some detail for the GPU acceleration settings - if it remains at the current level, rudimentary, (for me) the best compromise would be to disable the GPU acceleration to scroll through the photos, but using just to develop sliders.

  I would want guus at Adobe to improve the product real, not just marketing slogans on the improvement of performance!

  kirillxxx wrote:

  . My suggestion is simple enough - if the guys at Adobe can not program properly, the easiest would be (to make an option) to disable the GPU acceleration for image swithiching and just take his profit for the developer sliders.

  You can not simply switch off to change the image. The image * should be loaded into the GPU, which is where the delay comes from. Even though you might think about what would happen: of course the image would change quickly, but then you would still wait before you can deal with.

  For now the acceleration GPU in LR is very it is childhood: things first generation, and we are all good enough beta testers.

  Some people are lucky: they love him and have no problem.

  Some people are out of luck: it causes nothing but problems.

  Some people like me are sitting on the fence: we have mixed experiences.

  I don't think you threw $400, at some point (I live in optimism) questions will be fixed and LR will work on your system. He just had to wait. Isn't is funny, but you only need to take a casual look at any photography forum to see that there are problems with GPU acceleration and now is not the time to buy the latest and greatest card.

  I've personally held off buying a new card to replace my aging one until I see that there is zero chance of all the problems of proof.

• Can not see main cockpit with aircraft fsx acceleration

  I installed FSX deluxe edition then I installed the pack Acceleration but when I go to fly the aircraft that come with the acceleration expansion pack as the F-18 or the helicopter that the main cockpit view does not appear how to fix this problem

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

   

  Try to download and install the latest patch for the game form the link provided below.

   

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=204FEE1E-F8DE-4B21-9A32-5A41A3E27FF0&displaylang=en

  Note make sure you have latest video drivers installed on your computer, if not installed, you must install the drivers on your computer, to do that you will need to contact your hardware vendor.

  Note: you can visit the link provided below to connect with the gaming Forum.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Thank you, and in what concerns:

  Aito - Microsoft technical support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• RSA token with Cisco VPN clients

  I am currently using the 3.6 Cisco VPN client that connects to a 6.3 (4) version Pix. I want to migrate to token SecurID from RSA to RADIUS authentication. Is this possible with these versions of the software? I could not find information on the client to support the SecureID.

  Roland,

  Yes, it is possible.

  Please see the below URL for more information:

  http://rsasecurity.agora.com/rsasecured/guides/imp_pdfs/Cisco_PIX_702_AuthMan61.PDF

  Let me know if it helps.

  Kind regards

  Arul

• Slow performance of Lightroom with the graphics acceleration enabled

  : Monitor 1440 p 21:9
  CPU: i7 - 5820 K 4.1 GHz
  GPU: GTX 980 Ti
  Memory: 16 GB DDR4 @ 2133 MHz

  When I activate the graphic acceleration in lightroom, things like spotting take literal seconds to respond to a click, but when I turn it off, it's faster than ever. Someone at - it experience of another problem with the installation of similar pc? I know that with screens at low resolution and low pc specifications, this graphic acceleration can hinder performance, but I suffer from these issues at all!

  I suspect that there are some problems with 6.6 and the line GTXxxx.

  Lightroom CC: GPU acceleration cannot be enabled.

  https://forums.Adobe.com/search.jspa?q=GPU+GTX&place=%2Fplaces%2F1383621&depth=all

• Lighroom 6.1 develop vs vs library export colors change with the GPU acceleration

  Having managed to obtain the execution of acceleration GPU (with AMD Radeon 6800 on Windows 7) subsequently, I make a radical change in color between the library and develop modules.  The develop module shows a really cool picture.  This can be 'activated' on and outside by disabling GPU acceleration.  The library files and anyexported show a warmer image in comparison.

  How can I fix it?  Anyone has any ideas - I had to disable the GPU at the moment... again...

  Library and develop are color management and use the profile.  But they use it in different ways with different code (for example develop uses the GPU is not the case of library), so incompatibilities in the risk profile of stumbling one but not the other.

• Is it possible to use RSA keys with CLI Analyzer?

  I connect to a server and is currently the only way I can access, rather than provide my public key. Is it possible for me to specify it anywhere in the configuration? I don't see that it uses ssh-keyscan to add public keys to the host. Where I put my keys to make sure that the Analyzer CLI them pick up?

  Thank you

  Hi Brian,.

  We have this feature on the roadmap. Thanks for reaching out.

  John

• Problems with Freecell after "acceleration" of my computer

  I play Freecell sequentially, until a recent "speeding upward" from my computer, when the cards cascade upwards, and then cascade down I was able to press F3 and just change

  the last digit press on enter and so on. Now, after that the cards were cascaded to the top, I get a message of congratulations and have to restart thr game from scratch, by typing in the whole number.

  Is there something in the settings to return to my old system? I use W7 Ultimate 64 bit

  Concerning

  Dennis Chambers

  Hello

  I would say to restore the changes and then perform the steps to start correct and complete own to identify what exactly is the cause of the downturn rather than disable all.

  Step 1:
  You can do a system restore to see if it works:
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
  Step 2:

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  
  Note: once you have completed troubleshooting, perform step 7: to reset the computer as usual.

• How to configure IKE with RSA without this Protocol between 1760 and PIX501?

  Hello

  I have a question about authentication with RSA - SIG IKE between 1760 router and PIX501 without AC.

  .

  I found a URL between routers, but not for PIX. do I need third-party CA (public or internal) in the PIX?

  http://www.Cisco.com/warp/public/707/18.html

  .

  Please correct me if I am wrong or the return URL.

  .

  Thank you

  RSA - enc is available for IOS routers, PIX will support certificate or key pré-partagées, you might want to look at this example with a MS CA:

  http://www.Cisco.com/warp/public/707/lan_to_lan_ipsec_pix_rtr_cert.html

• Firefox 33.0.1 - rendering of the text with the acceleration problems hardware OR not.

  Hello, I have problems with Firefox render wrong text and other graphical problems, regardless of hardware acceleration.

  With hardware acceleration on, I have problems with "ghost text cursors" appearing in various parts of the interface, more particularly in the tabs next to the X button on each tab, but also the other sections of the interface as well. The text is returned to the appropriate thickness, but in some cases flashes back of fixes too thin (see below / stop) in sync with the speed of blinking text cursors.

  With disabled hardware acceleration, I have problems where the text in menus and Web pages is made too thin, making it extremely difficult to see. Issues and artifacts flashing disappeared, however.

  I use a NVIDIA GeForce GTX 750 Ti with the latest version of the driver (344,48).

  This only started happening around 33.0 version, maybe an earlier version (not 100% sure). I really want to look for and choose between what a crappy experience I'd rather have. I just want to how he used to, nice and clean and readable text. What can try to remedy?

  Try disabling OMTC and leave hardware acceleration in active Firefox.

  • layers.offmainthreadcomposition.Enabled = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Intel graphics media accelerator incompatible with windows 10

  Hello

  I tried to upgrade to 10 windows but get an error message that says that there is a problem of incompatibility with my graphics accelerator from intel. I have a HP Elitepad 900 g1 and have no idea of what that means. I have been on the HP website but could not find the driver for this update. Can someone please tell me if there is a work around for that or I'm stuck with windows 8 for always?  Thank you in advance.  Betty

  Thank you I've now followed your advice and am now running windows 10. Thank you

• Capture problems with the Portege M200

  Hi, I have developed a directshow application which captures the screen and stores it in a movie file. It has filter to capture-> WMVideo encoder DMO-> Avi MUX-> burner leader. The application works fine in the Toshiba protégé 3500 Series with trident video accelerator on this card. But it does not work on Toshiba protégé M200 machine with NVIDIA GeForce 5200 video on that card. Basically, the application captures one image.

  If I remove the compressor filter it captures so correctly. I want to know what is wrong with the machine. With encodre why there is not capture. I tried on other machines with NVIDIA video card series and it won't work as well. Why is it so?

  Hello

  Well, maybe your application has a bug?
  Unfortunately, I m not programmer or application developer and I can't solve this problem. Sorry, but I don't think that you will find here the answer to you question because most of the users are users of laptops Toshiba common not a developer of applications. :(
  Good luck

  Good bye

• What are the advangtage to have accelerated reader on top of your flash ram

  I bought my laptop thinking has made a good choice to have 8 GB of RAM with 24Gb player/acceleration because I wanted a 32 GB of RAM, but the max was 16 without acceleration flash drive

  Was proud of him be until I had 3 VMS (virtual machines) running, and could not start a 4th one because my lapyop froze...

  Seems that I have run out of memory!

  Was that a good choice?

  When that acceleration will flash drive kick?

  My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:

  • • Windows 8.1 64 Pro
  • • 4th generation Intel® Core™ i7-4800MQ processor
  • • Included 2-year warranty
  • • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
  • • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
  • • 8GB DDR3 System Memory (2 Dimm)
  • • 2 TB 5400 RPM hard drive
  • • 24GB flash acceleration Cache hard drive
  • • Two batteries of Lithium-Ion 6-cell
  • • Blu - ray player & SuperMulti DVD burner
  • Backlit keyboard •
  • • HP TrueVision Webcam high definition with digital microphone built-in
  • • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]

  Long story. The drive cache may hold all the contents of the memory, as well as some frequently used files and startup files. So more RAM more the cache drive must be to allow the Intel Quick Start, which is an immediate resumption of his sleep. HP thinks that they can get the content of 16 GB RAM and all the other files on a cache disk 24 concert so that they do not sell the player cache with 16 GB of RAM. I think that you can pass to 16 gigs if you don't care about the Intel Rapid Start, which is not the same as Intel Storge fast.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

  If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

  I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

  It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

  Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

  I'm hoping someone will have a suggestion that will clear up this problem.

  As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

  Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

  Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

  You can consider the issue closed.

  Thank you for trying to reproduce the failure.