Slow performance of Lightroom with the graphics acceleration enabled

Similar Questions

• Performance is worse with the GPU acceleration that without

  I have a Windows 7 system fast, i7 980 X processor with a monitor @ 2560 x 1440 pixels. As a photographer, I'm processing of thousands of photos and my PC can not be fast enough, so I thought that I invest a little in a new graphics card. OK, I have not bought a Quadro, but with GTX 970 from Nvidia, I always feel a modern, fast, with a value of more than $ 400 map.

  My first experiences after the installation of the new graphics card are more then disappointing - a lot is worse, running without any GPU acceleration. Before, I could scroll an image to the image almost no imperceptible lag. With the GPU acceleration turned on, each image must be "rendered" first first you get a blurry picture of Pexelated / of complitely and flackers of color shortly, then after a while, it becomes more clear. So it seems that with GPU acceleration turned on, Lightroom 6 completely ignores the preview images pre-rendered - FACT IT MAKE any SENSE WHAT? Yes, all the sliders mode develop work faster, but the preview shown instantly image is a false low resolution and it always takes time for an image high resolution to display - as much time, as it should, making it with a CPU.

  For me, it would make sense that next image will be loaded into GPU memory by actually DURATION and rendering the previous image would be preserved in memory as well. Also miss me some detail for the GPU acceleration settings - if it remains at the current level, rudimentary, (for me) the best compromise would be to disable the GPU acceleration to scroll through the photos, but using just to develop sliders.

  I would want guus at Adobe to improve the product real, not just marketing slogans on the improvement of performance!

  kirillxxx wrote:

  . My suggestion is simple enough - if the guys at Adobe can not program properly, the easiest would be (to make an option) to disable the GPU acceleration for image swithiching and just take his profit for the developer sliders.

  You can not simply switch off to change the image. The image * should be loaded into the GPU, which is where the delay comes from. Even though you might think about what would happen: of course the image would change quickly, but then you would still wait before you can deal with.

  For now the acceleration GPU in LR is very it is childhood: things first generation, and we are all good enough beta testers.

  Some people are lucky: they love him and have no problem.

  Some people are out of luck: it causes nothing but problems.

  Some people like me are sitting on the fence: we have mixed experiences.

  I don't think you threw $400, at some point (I live in optimism) questions will be fixed and LR will work on your system. He just had to wait. Isn't is funny, but you only need to take a casual look at any photography forum to see that there are problems with GPU acceleration and now is not the time to buy the latest and greatest card.

  I've personally held off buying a new card to replace my aging one until I see that there is zero chance of all the problems of proof.

• I Lightrrom 6.1.1 - it crashes.  Answers do not - constantly.  Launch the program, wait 3 minutes, then it crashes - never to return.  Trying to turn off the graphics acceleration result in a blocking * instantly *.  All the GPU drivers are up-to-date (Wi

  I Lightrrom 6.1.1 - it crashes.  Answers do not - constantly.  Launch the program, wait 3 minutes, then it crashes - never to return.  Trying to turn off the graphics acceleration result in a blocking * instantly *.  All the GPU drivers are up-to-date (Windows system).  AND - I can't uninstall it either.  Without hope.  So, what can I do?

  Hello

  Please, go to the Windows, where Device Manager, expand display adapters.

  Turn off the graphics card and open Lightroom, go to Lightroom preferences, then the performance tab, and then uncheck the option "use graphics processor.

  Lightroom farm and go back to Device Manager and activate the graphic card.

  Open Lightroom and then work in Lightroom and check if it works very well.

  Kind regards

  Tanuj Sandal

• Having a problem with the graphic quality of vector graphics in flashswf in Dreamweaver

  Hello

  
  

  I have a flash slide show, I built for a dreamweaver site that contains images of vecctor who lose quality when I run my site on the domain. I tested the file flash in flash is superb. I saw in live mode view in dreamweaver graphics look smooth but when I load my files ftp on my account from the host and test from there, the quality of the edges of the vectors is not smooth. I see a lot of irregular contours and don't know why.

  
  

  I test everything on my monitor 24 inch so the graphics are probably enlarged but even when I test the flash in flash file and the html file from my hard drive to a browser such as firefox my graphics are smooth, so don't know if his problem-solving.  also tested my site on my laptop which is a smaller screen 15 inches and the graphics look bad on the website there too. F of course it's a problem of resolution, I think that screen 15-inch would be showing the graphics smoothly not serrated. ?????

  
  

  Anyone has any ideas or can you help me with this problem? I have

  
  

  Johanna

  Ok.  And just to add, you can natively import files HAVE on the Flash stage.  And I'm no Flash expert by any means, but there are a few settings, you can change.  In the document settings, you can change the framerate.  Usually 30 fps runs smoothly.  Then on the publication settings you can disable compression, increase the JPEG quality and enable hardware acceleration for computers running Flash 10.2 or later with the graphical features.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• sound effects not synchronized with the graphics

  When playing poker online, sound effects are not synchronized with the graphics.  I have been instructed to uninstall realtek high definition audio, and then restart the computer.  I heard that this device will be restored during the computer startup.  Safe to do?

  Generally, Yes.

  My advice would be different in the fact that I would tell you to get the latest version of the drivers for your hardware from the hardware provider for the audio device, or at least to the manufacturer of the system.

• What is fledge command-line argument to control the graphics acceleration?

  Is there a command line argument to control the graphics acceleration for a JDE 5.0 Simulator?

  I would like to switch off in the command line so I can add it to the Simulator Run Eclipse IDE and the debug configuration.

  I checked their moult imaginal/Help and I have not found any that I could see that it works.

  Thank you.

  The settings are stored in a file located at

  \Documents and Settings\ [windows login name]\net\rim\fledge-2\fledge-saved.conf

  At the bottom of the appearance of file for the line:

  4
  

  Change the number 0 for no acceleration.

• How to turn off the graphics acceleration to take flight?

  Was having trouble getting the Simulator running, I get the warning about the OpenGL acceleration and take-off then crashes.

  I thought I found the answer here: http://supportforums.blackberry.com/rim/board/message?board.id=java_dev&message.id=135492#M135492 but unfortunately the solution is not applicable to me. The fledge file - profiles .conf I (C:\Users\matt\net\rim\fledge-2\fledge-profiles.conf) is practically empty, so there is no quick replacement, I can do for the BodyBuilder.

  It's the whole of the file:

  
  

  Does anyone know what I can do to get the graphics acceleration disabled in this case?

  It's called "take flight - saved.conf" not "take flight - profiles .conf '.

  
  
    Waterloo ON
    -737
    0
    
      
        0
        302
        
        1638
        Default 3G Network
        false
        -40
        EDGE
      
    
    
      
        74:ae:2f:c4:be:8c
        Default WLAN Network
        false
        -40
      
    
    
      
        0
        43.6775
        -80.7339
        1
      
      
        0
        43.4631
        -80.5207
        1
      
    
    
      
        
          0
          true
          43.4631
          -80.5207
          4
          655
          0
        
        
          0
          true
          43.4746
          -80.5461
          4
          655
          0
        
        
          0
          true
          43.4765
          -80.5414
          4
          655
          0
        
        
          0
          true
          43.6775
          -80.7339
          4
          655
          0
        
      
    
    
      
        Default CDMA Network
        65535
        false
        -40
        8930
        EVDO
      
    
    
      
        313
        204
        false
      
      
        false
      
    
    0
    
      You are using the 'Reuse Simulator' option.  You do not need to close the simulator to redeploy your application.  Close anyway?
    
    false
    true
  
  

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

  My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?

  I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.

  I disabled the Nvidia because it seems to me that Photoshop is not supported.

  Hey Mohit and other colleagues!

  See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

  I hope that helps for a while this problem.

  Best regards.

• The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

  Yes, he does. I have the 980 and it works very well also.

• How to install lightroom with the help of my redemption code

  How to install lightroom with the help of a redemption code?

  Hello

  You can not install lightroom with a redemption code.

  You must use a serial number to install it.

  For the serial number, click on the below mentioned link

  https://redeem.licenses.Adobe.com/getserial

  Enter the code of redemption on the link above and you will get the serial number.

  Thank you and best regards,

  Garima SALAUN

• Increase the performance of MAC with the SSD upgrade

  I have a 21.5-inch iMac model 14.1 (end 2013) with 8 GB of memory and a 1 TB drive. On this, I use some applications in memory such as Adobe CS 5.5 and VMWare Fusion 8.1.1. I have Applecare on the machine until September 2017. I often find myself running out of memory. My goto solution would be to increase the memory and replace the hard drive with an SSD. I fear, however, that this cancels my Applecare. My research indicates that while that frowned upon, I can upgrade my memory and keep my Applecare as long as it is done by an authorized by Apple, but if I do the SSD I'm out of luck for the installed components. My thought is that I can get an external SSD and move the ' WIndows 10' VM (s), as well as expand and move the swapfiles for the SSD system.»

  My questions are am I right about the Applecare and warranty and I plan to use an external SSD to accelerate performance and ease the work of memory constraints?

  I have f

  I have a Macbook Air in 2010 and also a 2008 iMac - both with only 4 GB of memory (you have twice as much), both running El Capitan and the two with SSD - and perform very well. The 2008 iMac used to have a rotating disc which has recently failed, with the replacement of SSD, it is a remarkable transformation with the new SSD, it seems very quickly for me. Both have Photoshop CS4, which is not used much more, but they run this software very well, as well as MS Office 2011 and other programs such as Mail, Safari, Firefox, etc. (Firefox + Photoshop together put a noticeable load on machines, in fact, but while I sometimes hear the fans come on the Macbook Air, it maintains not up very well) No slowdown) You'll be in great shape with a SSD for your newer computer. These old machines that I use have Core 2 Duo CPUs, chips relatively slow, but they seem very quickly with the SSD.

  You will need to check with Apple directly on your AppleCare and so that would be affected. I don't know that anyone is not Apple should trust this question.

• Problem with the graphics drivers in ThinkPad SL510

  Hello guys.

  I have a ThinkPad SL510 with Intel Pentium T4500 @ 2.3 GHz and 2 GB of RAM. It currently uses the Intel GMA 4500MHD graphics, which is very slow and even Counter Strike 1.6 has frame drops each time only and then. So I visited the page drivers for SL510 and there is a driver graphic AMD listed that will allow a card ATI Mobility in the laptop. But the problem is that I have download the package and it does nothing. It installs only certain ATI Catalyst etc. but none of the graphics drivers at all, my laptop always uses the base Windows XP ones.

  Any suggestions? I want to unlock the ATI card so its possible since its going to be better for the play of light.

  Thank you!

  It's the original of your SL510 config

  ThinkPad SL510 2847-BTG
  
  T4500(2.3GHz), 2 GB of RAM, HD 320 GB at 5400 RPM, LCD 15.6 in 1366 x 768, Intel HD graphics card, CD-RW/DVD-RW, Intel 802.11bgn wireless, Bluetooth, 1 Gb Ethernet, UltraNav, camera, 6 c Li-ion, Win7 Home Premium 32

  You have only Intel graphics, install drivers ATI will simply not work since you don't have any ATI hardware on your laptop.

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft