Problems with Freecell after "acceleration" of my computer

Similar Questions

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Problems with Vista after disk cleanup

  I have problems with my computer. I have Windows Home Basic Edition. I decided to do a disk cleanup on the computer to speed up some. After disk cleanup, all icons on the desktop disappeared. I tried to open the word processor in the start menu, but got a message saying that he had either been moved or was not valid, and the shortcut would be deleted. At this point, I have advanced and restarted my computer. Only, it wouldn't start at all. I got the Windows installation disc and crossed to repair your computer option. It took forever for a kind of diagnosis, but the started computer. My desktop background was black and a folder with my files was missing. I have received a message that my activation code is not authentic or valid. I tried to restore the computer to an earlier time, but that would take forever and doesn't not work even in safe mode. What can I do now?  I barely understand anything in this area. Thank you!

  I was finally able to do a system restore and validate windows. However, all my files, including photos and important documents have been removed. Is it possible to restore these? And is there anything else I should do to prevent it happening again?

• A problem with the hard drive of your computer

  Windows is not able to open a file on the hard drive of your computer. This could be a temporary condition that may disappear after you restart your computer, or it could be a more serious problem with your drive hard or its driver. I tried to restart my computer, I ran the hard drive error checking, nothing seems to help. Please advise?

  Hello

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Problem with SP1 after reinstall clean Vista

  I did a "clean and reinstall" on Vista 32 bit Home Premium machine due to problems of registry after a "System Mechanic" install.  The reinstallation of Vista went well so I started to download and install all updates for the computer.   Everything downloaded and installed fine until I got to SP1 (KB 936330).  Windows Update tells me that the installation was successful, but when I click with the left button on computer then check properties that SP1 does not appear in the description "windows edition".  I installed the update several times and get the same results.  Windows updates always tells me to install the same update (SP1) and when I look through the history it States successfully 4 times.  When I look at control panel-programs-uninstall a program - and discovers a part of the update uninstall, update SP1 is not listed.   I missed something?  Help, please.

  Hello

  You did changes to the computer before the show?

  I suggest you try the remaining steps in the following link:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• PROBLEM WITH MY OPERATING SYSTEM AND LAPTOP COMPUTER PART 3

  Hi all

  I speak not of what I already writtent here on my computer issues have, if you feel lost just report to my previous post below. Thank you all for your help. The following messages appear on the screen of my laptop:

  'msnmsgr.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "Skype.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "OSA.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  At some point of time, I got the following message "cannot install required Windows files make sure all files required for installation are available, and restart the installation of the error Code: 0 x 80070571" after trying to reinstall Vista.

  Today, I tried to install WinCleaner OneClick to solve problems has my laptop, but I got this message: Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-B29TV.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-AO2P4.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-819TT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-UARNT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-J8ISF.tmp error 1392: the file or directory is corrupted and unreadable".

  When I open the device under Network Manager maps I saw a yellow triangle with an exclamation mark in front of Microsoft ISATAP #2 with a message "the device status this device does not work properly because Windows cannot load the drivers required for this device (code 31)"

  Below, you will find all the information you need to help me solve these problems with my laptop, because I do not have how to keep a current thread. Once again, thank you for your help

  FIRST POST OF THIS THREAD

  Greetings to one and all and I thank very you much for your help to help me.

  I have a laptop Dell Inspiron 1501 with Windows Vista Home Basic AMD Mobile Sempron processor. Recently, I tried to upgrade the free version of my Antivir Avira antivirus for a trial version, but during the process, I lost my internet connection. Sometimes, my network shows another "Local and Internet" and "Local" only. However, in both cases I am not able to connect to the Internet. Whenever I try to open a page in the browser, it is blank and nothing appears on the screen... I also try to reinstall the operating system, but since I can't access the Internet when I reached the point of the process called "GET IMPORTANT updates to UPDATE for the INSTALLATION" where I have to choose between two options a) go online to get the latest updates (recommended) and b) do not get the latest updates for facilities , I can only opt for the other that says that the installation may fail. Therefore, it seems that I cannot even reinstall the operating system. In addition, I often small windows to appear on my screen as "msnmsgr.exe" "skype.exe" "OSA.exe" file corrupted with such messages "the file C:\Users\ myname\AppData\Local\Temp directory is corrupted and unreadable. Please run the chkdsk utility ". However, the problem is I can't run the check disk, because every time I have it try I got the following message "checking file system on C, the type of files is NTFS one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue"until I read the whole message again appears" the disk check was cancelled ". I am not able to get the help and Support Windows open, but on the window I only heard the message "you have lost your connection using Windows and support". I don't know what to get my computer works well and my connection internet back. Someone here tell me step by step what to do to solve all the problems mentioned above? I am very grateful to each of you. Please, note that from my computer I have not access to Internet, so tell me any solution which will take me to use my computer to connect to the Internet. Sorry for the length of my post.

  PS at the beginning of this problem I used to have errors with their code on the screen of my laptop, but unfortunately I did not take account of their > more, for to appear the problem worsens my computer was a bit slow

  SECOND POST OF THIS THREAD

  First of all, thanks a lot to you all and especially to the Lorien-SpiritX and their insightful answers. As they both suggest to me I tried sfc/scannow and I received the following message on my laptop screen "start the phase of checking system scan audit 44% complete Windows resource protection could not perform the requested operation"

  I did also check CHKDSK/f/r utility Office and I received the following message "the type of the file system is NTFS cannot lock drive current CHKDSK cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts "and I answered Yes

  In addition, I tried to use my CD to reinstall my operating, but if it starts well by copying files to the end of the process, when the second stage of the process "expand our files" starts, it stops at 27% and never goes further.

  These are all questions, added to all that I already mentioned in my first post with the same title

  This looks like failing hardware, not software. I would look at the hard drive first, and then the RAM and the motherboard.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If the computer is still under warranty, contact Dell technical support.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• x 200 tablet, still have problems with smartaudio after driver conexant last updated.

  where the devil file complaint or tech support, whenever I call it, there are people who do not know jack whatever it is.

  I had an x 200 tablet, was seen problem with the beams stupid mistake that keep popping up.  then I updated my drivers conexant coming out who was supposed to address this problem. But it doesn't, it creates more problem.

  Now whenever it starts, an error with smartaudio.   so, it leaves me with 2 choices, or I used the former driver who does not mistake smartaudio. but the beam forming erro. or I use the new driver that will give me the error smartaudio.

  anyone has the solution let me know please.

  running, updated vista business sp2.  and Yes, I've updated all the drivers that I find unnecessary and causes more problems for me.  as the update of the thinkvantage system that made it useless until I have some file and add vista business sp2 in it.

  Yay what's up, I answer to my own problem tech.  I hope this can help some of you.  CUS we are ourselves since lenovo cannot help us with our problems. they should just all the fire so that they can sell their products cheaper. for the ppl who work there are unnecessary.

  "OK for people with the beam forming the problem, just go to c:\program Conexant delete folder there, it's to say" TOMY.

  reason for this is because it won't let you delete the folder of conexant all at once.  and remove it to ensure that the new drivers to install correctly.

  After that, simply download and install the latest drivers from the website of lenovo conexant.   Now you should get only the smartaudio error when you switch to Tablet mode or laptop.

  just go to the c:\program files\CONEXANT\SAII directory, rename the smartaudio and SAIIcpl to something else.  I just added a _ in front of her.  This way, whenever you change the mode it will not create the smartaudio error. and you can rename it back later if you wish, or if someone comes up with a better solution

  now, you might ask, how can we change the parameters for the smartaudio.

  If you really want to set that just go to c:\swtools\drivers\audioc\smaudio\smaudio, there is an icon that is smaudio.exe you can double click and run it to change the settings.

  After that, you should not get the beam forming or smartaudio error.

  Lenovo has probably screwed up on some instructions, which does not run programs properly maybe that happens to people with vista sp2?

  CUS, I noticed that when I upgraded to sp2, the thinkvantage system update will not work until we edit some file and add vista sp2 in it.  You can search the solution on this forum if you have this problem.

  Thanks and good luck

  just need to do an update, while this method a bit worked, sometimes when I start I always get the beam forming the error.  It's just that it does more every time I switch between Tablet and computer laptop mode, which is better than nothing for now.

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support