Run a suite of tests (scenario) on a RemoteObject

Similar Questions

• After dovnlading Creative Suite to test, my indesign CS6 gone for good! What can I do to get it back?

  After dovnlading Creative Suite to test, my indesign CS6 gone for good! What can I do to get it back?

  Cloud of reading takes up https://forums.adobe.com/thread/2089127 for some ideas

• Problems running (service) - Oracle Application testing Suite

  Hello
  
  I installed Oracle Application Testing Suite and I can't get to the web interface running. The windows interface works well, but I can't seem to get the web interface to run. The problem seems to be isolated the the 'Oracle Application Testing Suite Service Application'... when I try to start the service, it stops (probably fails).
  
  all this experience? Thank you.
  Denial

  Did you already install the JBOSS Application Server too? This is normally a second stage of the installation of OATS. You can tell by choosing in the start menu XP OATMEAL-> tools-> Oracle Application Testing Suite Application Service Update.

  If you have already installed this choice will warn you, giving you the chance to get out or reinstall.

• Problem running scripts with Oracle Test Manager (MTM)

  Hi all!
  
  I am facing a problem to run any test in OTM.
  I'm adding scripts that I created in OpenScript (and which take place in perfect inside) but running in Test Manager fails.
  To be more precise, I even created a very simple script for the case in which I open the browser, navigate to an existing page (for example www.fmstocks.com/fmstocks - like documentation for example) and then I close the browser.
  What is happening is that the test fails after a few seconds. In the report results, summary of Script, it there a failure result to give Total iteration:
  
  + Object "/ web:window[@index='0" [or @title =' subject: empty '] "+."
  + did not action: +.
  + < name of message = "Navigate" > < parameter WindowIndex = '0' > +.
  + < / parameter > +.
  + < parameter Url = "http://www.fmstocks.com/fmstocks" > +.
  + < / parameter > < / Message > +.
  
  This is the same result that I get in any script I run (with different Url of course).
  I tried to alternate some settings in the Manager (Tools-> system) systems and change my OTM server, I've seen in a thread. I found that if I write as a user name and password to my windows or my OTM username and password (instead of JMSAdmin I see is the default user name) when I run the test simply never stops!
  To be clear, I just started using OATS. All the foregoing is done with the default settings after installation. OpenScript works fine but I need OTM so that I can perform several set of test scripts.
  
  Any help is appreciated!

  Hello
  You must first set back the remote system OTM to JMSAdmin / the_pwd_you_supplied_during_installation
  Then, you must stop the Windows Service called "Oracle Application Testing Suite Agent Service" and put it in the manual.
  Then, you start the agent from the command line
  C:\OracleATS\agentmanager\bin\AgentManagerService.exe - c C:\OracleATS\agentmanager\bin\AgentManagerService.conf (something like that according to the installation path).

  Let us know if it is ok then.

  JB

• A dual core iMac is considered a multicore for creative purposes Cloud computer, or the computer there image to run the suite?

  I read that a computer needs processor multi-core for the Creative Suite to run on.  I have a dual-core iMac.  The Creative Suite will run on this computer ok, or should I go with a higher processor?

  Thank you

  Estifanos

  Hi evware7777,

  You can check out CC Office approx. as well as requirements of the application using this KB doc CC. system requirements | Creative cloud.

  Kind regards

  Nicos

• OSB: Cannot run message in the test console

  Hi all
  
  I have a problem with a test console.
  I can't run document application in the test console.
  The error is ' an unexpected error to access transport for service information: null ".
  
  Any suggestion would be appreciated.
  
  Thank you
  
  Published by: tamjeekong on June 25, 2012 21:44

  Hello

  Be sure to mark the answers accordingly... Useful or appropriate, following the rules of the forum
  https://forums.Oracle.com/forums/Ann.jspa?annID=893

  Cannot run document application in the test console

  Please give us more information about your problem. What is a Proxy Service? A Business Service? What kind of transport do you use?

  See you soon,.
  Vlad

• Can I run the suite adobe on a mini mac end of 2012?

  Hi, I have a mac mini end of 2012. It has 4 GB of ram, Intel HD Graphics 4000 and an Intel Core i5 2.5 GHz. It is currently running OSX 10.10.5 I use iMovie and motion 5 for some time. I don't really think I want final cut, so I'm looking after adobe. The main applications of 2, I'll use is adobe first and sequelae. My computer will be able to run these two applications? THX

  If they are in versions mac Yes

  If they will work very well with only 4 GB is another question

• Is powerful enough to run Creative Suite of MacBook Air?

  I have completed about about my Creative Cloud 30 day trial and would sign. However, I am also picking a new macbook to run it. I have not a laptop for the time that I was using my iMac for everything. What I want to know, is the new MacBook Air, which was launched yesterday powerful enough to run Adobe creative applications? A macBook Pro looks the obvious choice that like it's my second computer and I used to use it as much as my iMac I focus mainly on the weight and the price - I wil he uses mainly on a trip a few months each year, but I still need to work efficiently with creative cloud. Can you please specify?

  Yes, any MAC that exceeds the 10.6.8 can run creative cloud.

  The specification techniques for various applications of SC 6 can be verified here: http://www.adobe.com/products/creativecloud/tech-specs.html

  Hope it will help you decide better. !!

• How to create the KIT Item test scenario?

  Hi all
  
  I want to test the operation of the KIT feature in OM I tried to look in the User Guides / Web, but I'm not able to get the specific features associated with KIT Item OM test
  
  If anyone have idea of how point KIT works and what are the settings required to perform in the system associated with KIT, what Type of Transaction, we use, etc., it will be great.

  Vishal,

  I don't know if you're familiar with CTO processes in Oracle (if she is not discover the CTO instructions/manual), but kits are very similar they have a bill of structure materials and components are eventually exploded on the client command buffer on save/booking (according to the setting of the option OM profile (: method of freeze included Item).

  Each line has its own workflow in OM - once again, in the same way as a configuration except that in the case of a kit of all components are required.

  I sent you a sample script of test to your e-mail address.

  Kind regards
  Jon

• How long is expected to end the Test check?

  I am trying to run the suite of Test of NAS and the first step during check there are a lot of errors.

  It takes about an hour to run and fail somewhere. Once I take steps to solve the problem it takes another 1 + hour to find the following problem which is very time consuming.

  My question is, is it expected time (1 hr +) to perform the step to check? When I fix something, it takes another hour to find the following problem.

  The more I see failures of inconsistently. For the first round if there is no ping failures not STAFProc on Linux VM, then for the second, it will pass but fail to retrieve the IP address to another VM linux management

  Thanks in advance!

  Yes, Verify takes 60 minutes. He said that he right in the pdf file of test. And Yes, it's very annoying.

  Thank you

  John

• JUnit Test Suite Limitations on the number of test classes can be included in the suite

  I run JUnit tests on my ADF Model picardalice in an application. I'm getting an instance of a request through the class of the device module and it helps in my test classes. It was created using all the Test Suite of Business components in JDeveloper 12.1.3.

  I'm running a JUnit test suite and it has several test classes in its operation. It runs successfully some and others fail. If I run those who fail by themselves, they are successful. If I remove the test classes in the suite they work (even those who have failed when the test classes were listed as a result of tests).

  Here is my code for the test method.

  @Test

  public void testAccess() {}

  See ViewObject = fixture1.getApplicationModule () .findViewObject ("ProjEstimateDtlVO");

  assertNotNull (view);

  }

  the ViewObject perspective comes return null for the execution of the test suite during all test classes are ran. It's successful return if I run one test case. It's successful return if I remove test classes in the following before running the suite.

  There are 70 + test classes in the suite. Is there a limitation on the number of test classes that must be executed in a test suite? Is it because it is repeatedly using an instance of the application module? Is this other thing?

  Everyone ran through this?

  Thank you.

  The problem in my case was because in one of the test cases I was releasing the module of the application in the method of disassembly. Since the application module was created once again, when I ran after tests and he ran this test scenario, anything after this would fail due to no application being created module.

  Thanks, Timo

• How to unit test a suite of unix command line?

  I tried to run the Unix command line test unit via the sdcli command, but it get hooked forever. I use version 4.0.2. Is it possible to call the module of Oracle SQL developer of Unix environment test?
  Below the out is when I tried to run the command sdcli with bash command - x.

  ++ . sdcli-run UnitTest - suite-name DEMO - repo testdb - db testdb

  +++ . sqldeveloper

  +++ /opt/sqldeveloper/sqldeveloper.sh

  Please help me.

  Who doesn't look like the output of the linux shell?

  Here is what I get.

  

• Test suite execution order

  Hi friends,

  I need to run a Suite of 5 tries. I created a Suite with these 5 trials. Trials are appearing in alphabetical order. When I run it, it runs in a random order (not included).

  I want to run it in the order indicated (for example, Test_3, Test_2, Test_4, Test_1, Test_5). How can I achieve this?

  Thanks in advance!

  Hi James,

  Thanks for the clarification.  I could be wrong, but I do not believe there have been complaints on test item out of sequence - that is, there is a SEQUENCE column in the SUITE_ITEM table in order to control the order of execution of test in the suite.  If you run a query similar to the following in a worksheet (or as a user-defined report) against your unit test repository, the execution order corresponds to the order of the sequence columns?

  SELECT UT_SUITE.NAME AS NOM_SUITE,

  UT_TEST.NAME ACE TEST_NAME,

  UT_SUITE_ITEMS. SEQUENCE,

  UT_SUITE_ITEMS. RUN_START,

  UT_SUITE_ITEMS. RUN_TEAR

  OF UT_SUITE_ITEMS

  JOIN INTERNAL UT_SUITE

  ON UT_SUITE_ITEMS. UT_SID = UT_SUITE. UT_SID

  JOIN INTERNAL UT_TEST

  ON UT_TEST. UT_ID = UT_SUITE_ITEMS. UT_ID

  ORDER OF NOM_SUITE, UT_SUITE_ITEMS. SEQUENCE;

  In any case, the point of confusion is perhaps alphabetical list of tests in a suite does not expose the order of creation (sequence).  So if I have...

  1. create 10 tests: test_0, test_2,..., test_9

  2. Add all to suite_1 in ascending order.

  3. run the above query.  It shows the sequence numbers the suffix of test matches

  4. remove the tests with a numbered suffix even.

  5. Add in trials with pairs suffixes, but in descending order.

  6. run the above query.  He then shows the tests, in the order 0,..., 9, as tests_ 1, 3, 5, 7, 9, 8, 6, 4, 2, 0

  Who help me?   I guess listing tests in a suite in the order of creation (sequence) and allowing to make drag & drop reorganization could be more intuitive.

  Kind regards

  Gary

• Selectively running Tests

  Hey all,.

  My goal is to build a UI that will present a tree of all my cases/suites available test and that the user can choose which tests they want to run.

  I need a boost in the right direction as to the best way to start a program to build partial test suites while keeping all the functionality of large metadata in my test FU4 adds case. Any suggestions?

  Thank you!
  Brian

  Brian,

  The docs are not to do this again, but if you take a look at the static class application it allows you to catch pieces of classes or filter them in order to create an "application" which is really a sub group of tests.

  For example:

  Request.Method (TestTwo, 'testTwo3')

  Mike

• In how-to SQLDeveloper are nested test suites

  I've been in SQLDeveloper, write unit tests. I started collecting the unit test suites of tests based on the package/module. I have a test suite (s) to a higher level by calling the package/module test suites. I did it to before JUnit.
  
  When in the Unit Test browser, right-click on the icon of Suites and by selecting the menu item add Suite, only the tests are displayed.
  
  I have reviewed documentation SQLDeveloper and this forum, without finding how to proceed.
  
  Any way to do it? or is it one that has yet to be developed characteristic?
  
  Kind regards
  Bill

  Hi Bill,

  Please try the new unit testing feature.

  Unfortunately it is impossible to really nest now test suites. (You can go to the [SQL Developer Exchange | http://apex.oracle.com/pls/otn/f?p=42626:37] and save it as a feature request.)

  You can watch the action running from the command line. See: Help-> Table of contents, with SQL Developer-> using the unit tests command line Interface. Again, you'll be able to really nest suites, but you can make batch files to run sets of them. (No. nested results if :())

  Brian Jeffries
  SQL development team