Run VMmark.config

Similar Questions

• services do not start after you run vmware-config - tools.pl

  VSphere 4 Enterprise - SLES10 x86_64.

  wmad: ~ # rpm - qa | grep vmware-i

  VMwareTools-8193-164009

  wmad: ~ # uname - a

  Linux wmad 2.6.16.60 - 0.54.5 - default #1 Fri Sep 4 01:28:03 2009 UTC x86_64 x86_64 x86_64 GNU/Linux

  I updated the kernel, now when I run vmware-config - tools.pl, I get the attached result ending in "abandoned Execution." Ideas?

  Thanks, Mike

  This does not happen with newly released patches.

  If you are not ready to upgrade the latest patches of the ESX host, you can also try to force load modules or try to recompile all modules by using the command "" vmware-config - tools.pl - compile ".

  The other (crude) way is to get the last iso linux tools of any other host ESX-4 (with the latest patches) and goes up on the virtual machine and proceed with the installation.

  N

• How to run the Config tool?

  We are Linux running Essbase 11.1.1.3 - can someone tell me how to run the Config tool?

  Hello

  Try. //common/config/9.5.0.0/configtool.sh

  More information:-http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch04s05.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• VMwareTools on error 3.11.10 - 100.fc18.x86_64 Linux while running vmware-config - tools.pl

  Implementation with a new VM FC18 on a host Windows 8 I can't get shared folders to work. After investigation, I noticed that vmware-config - tools.pl runs without error, except for the following:

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-Mmwoe6/vmhgfs-only.

  / bin/make /lib/modules/3.11.10-100.fc18.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/kernels/3.11.10-100.fc18.x86_64'

  do: after you have entered a unknown directory

  make: * variable name empty.  Stop.

  do: leave a unknown directory

  make [1]: * [_module_/tmp/modconfig Mmwoe6/vmhgfs-only] error 2

  make [1]: leaving directory ' / usr/src/kernels/3.11.10-100.fc18.x86_64'

  make: * [vmhgfs.ko] error 2

  make: leaving directory ' / tmp/modconfig-Mmwoe6/vmhgfs-only.

  I checked the directory is valid as such:

  LS /usr/src/kernels/3.11.10-100.fc18.x86_64

  firmware crypto Arch include CPI core samples Makefile Module.symvers File System.map usr vmlinux.id security

  block pilots fs init Kconfig lib mm net scripts tools his virt

  I've been struggling with this for awhile and I really appreciate all or hunting for a solution. Thank you.

  To answer my own question; I had to reinstall my kernel-devel package to make it work:

  [promp] t # yum reinstall kernel-devel

  [quick] # cp /usr/src/kernels/3.7.2-201.fc18.x86_64/include/generated/uapi/linux/version.h /lib/modules/3.7.2-201.fc18.x86_64/build/include/linux/

  [quick] # /bin/vmware-config-tools.pl

  And now my shared folders work!

• Running Auto Config in R12

  Hi DBAs,
  
  
  If I make one minor change in the context file, I need to run the automatic configuration and auto config must then configure all vertices. Is it possible that I retain all changes previous course of automatic configuration and that new changes to apply.
  
  
  Thank you
  -Samar

  Samar,

  This can be done by customizing the automatic configuration. Please see the following notes to learn more:

  Note: 270519.1 - customization of the environment of automatic configuration
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=270519.1

  Note: 387859.1 - AutoConfig helps manage system Configurations in Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=387859.1

  Kind regards
  Hussein

• Run VMmark 2.0 failed (VM resources Check)

  Hi all

  Have someone run the finished VMmark2.0?

  I have set up the infrastructure to test VMmark2.0 already.

  When I run the benchmark of client0 (STAXMon.jar)

  1. reading set up leader: ok

  2 configure the workload: ok

  3. start the installation of environmental: ok

  4. time synchronization: ok

  5. get the error "failure: VM resources Check."

  I have followed the issue: the configuration file (xml file) call the 'VMmarkPScli.ps1' to run. And faild in the function "CreateClusterVMMapping".

  I still can't solve the problem, help ~ ~ ~ (matter of detail log file: ClusterVMmapping.txt)

  Thank you

  Hi Sam,

  By examining the hosts for DS2WebA, B, and C VMs files, I see that you didn't follow the instructions for the configuration of these VMs.  In the supplied template, you should see the following:

  # Start snip

  127.0.0.2 DS2 - DS2-Web WEB.eng.vmware.com

  # Change DS2DBn intellectual property, do not change the HOST name

  DS2 - DB

  end snip #.

  In your hosts file, you change both the ip address and the host name.  For all the stuff from web server to work, each front-end web should be able to solve DS2 - DB, what you can not.  Please change your guest VM DS2Web files so that they can solve DS2 - DB and try again.

  Ex: 192.168.0.106 DS2 - DB

  Hope this helps,

  Joshua

• When running on: config I get a message warning me to cancel a guarantee, how do I get this to return saying "here be dragons"?

  This isn't a problem, I prefer just dragons!

  "This might void your warranty!" is displayed for the locale English (United States).

  "Here be dragons!" is displayed for the local English (British) and possibly other English regional settings.

  You can download Firefox in a particular language from the link below.

  • http://www.Mozilla.org/Firefox/all/

• STAX error when running VMMark2 - STAX.bat - Service STAX unregistered

  Hi all

  I hope that someone can help you. I finished configuring all the systems required to run VMmark 2.5. I set up the primeclient and the client0 on the same computer, Windows 2008 R2 x 64 but when I run VMMark2 - STAX.bat I get the following error:

  Machine Service STAX: local

  Name of the Service STAX: STAX

  WARNING: The service STAX is not registered on the specified computer.

  Check the properties of the STAX monitor.

  However, StafProc.exe seems to be running.

  I can't find all the logs that might point me in the right direction and the only info I found on the forum in this regard is the next post, which did not solve my problem (https://communities.vmware.com/thread/449927?start=0 & tstart = 0)

  Any help would be appreciated.

  Thank you, Charlie

  Sorry, I was being a fool and had saved staf.cfg to c:\staf\ not c:\staf\bin\! Once the correct config was in place he has obviously sprang into life!

• ONTAP-v in a vmmark test

  Has anyone tried a VMMark test with a virtual machine that is used to manage the cluster storage?

  I have several hardware solutions, I am unable to run VMMark because they contain foreign to the workload Vms(for storage). ClusterVMapping .txt reports an incorrect number of virtual machines in the tiles, which is what I expected.

  Is it possible to exclude these virtual machines in the vmmark2.config?

  Hello

  You can disable the cluster mapping by editing the file VMMARK2.config and uncomment then by setting "DoClusterMapping = 0".

• Error starting VMMark

  I went to start the VMMark test for the first time yesterday.  Since this is my first time running VMMark I was running just a single mosaic of the preferred customer.  When I started, I got the below error.  I have tried both a 64 bit and 32 bit JRE, but got the same error.  The first client that runs Windows 2008 R2 64-bit. Any ideas would be appreciated.

  C:\VMmark2\tools > java-Xms512m-Xmx1024m-jar C:\STAF\services\stax\STAXMon.jar

  Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\STAF\bin\JSTAF.dll: could not load the AMD 64.

  He .dll on a platform of IA 32-bit

  in java.lang.ClassLoader$ NativeLibrary.load (Native Method)

  at java.lang.ClassLoader.loadLibrary0 (unknown Source)

  at java.lang.ClassLoader.loadLibrary (unknown Source)

  at java.lang.Runtime.loadLibrary0 (unknown Source)

  the impossible (unknown Source)

  to com.ibm.staf.STAFHandle. < clinit > (STAFHandle.java:306)

  at com.ibm.staf.service.stax.STAXMonitorUtil.getNewSTAFHandle(STAXMonitorUtil.java:53)

  to com.ibm.staf.service.stax.STAXMonitor. < init > (STAXMonitor.java:524)

  at com.ibm.staf.service.stax.STAXMonitor.main(STAXMonitor.java:5623)

  Do you think the STAFProc.exe process running in the Task Manager?

• cygserver-config error

  Hi, when I installed the cygwin, amd run cygserver-config, that happened error

  the error message

  "

  
  Administrator@2k3 ~.
  $ cygserver-config
  Replace the existing /etc/cygserver.conf file? (yes/no) Yes
  Generate the /etc/cygserver.conf file

  
  WARNING: The following function requires administrator privileges.

  You want to install cygserver under the name service?
  (Say 'no' if it is already installed as a service) (yes/no) Yes
  / usr/bin/cygserver-config: line 176: cygrunsrv: command not found

  The cygserver as a service installation failed.  Please check the
  error messages you got.  They could give an idea why it failed.

  A good start is either you have no administrator privileges
  or a missing binary cygrunsrv.  Please check both.

  
  Administrator@2k3 ~.
  $

  "

  How to solve the error

  Thank you

  Can you try reinstalling cygwin?  Maybe choose another mirror?  I just tried it on a virtual charge machine and was able to download and find the cygrunsrv.exe package.

• Ubuntu 9.10 and more recent vmware server 2. Will never run after restart of ubuntu.

  Hello

  I installed VMware server on my box of ubuntu 9.10 (32 bit, P - IV 2.4 GHz, 2 GB RAM). The problem is that he never runs after a reboot, even if the demons are actually being run. If I run the file vmware - config.pl, it does not work because it tells me the vmci, vmmon and vmnet modules are not standard. I then remove these modules, re-run vmware - config.pl and then it works until the next reboot of the computer.

  Does anyone have a solution for this problem?

  Hello

  OK maybe that you have upgraded the kernel version recently?

  If you use the standard kernels provided with Ubuntu 9.10, always use this one:

  2.6.31 - 15-Generic

  Make the installation of vmware server with the kernel version above following the directions I told before. Then, you ALWAYS start ubuntu 9.10 with this kernel version and never use another more recent.

  At the moment (as I know), it is the only way to run a vmware server 2 on ubuntu 9.10.

  A saludo/best regards,.

  Pablo

  If upon mi respuesta ayuda, por favor puntuarla considered como correcta o util. MUCHAS gracias! - If you have found this information useful, please consider awarding points for the answers 'OK' or 'useful '. Thank you!!

• How to solve this problem in test VMmark?

  When we run Vmmark harness, it has always failed and the message "could not PING 6 following machines.

  (See attachment harness_run_fail. (JPG)

  Although I have confirmed that the customer could ping 6 machines, the test has always had the same failure.

  Someone knows how to fix this? Thank you!

  You use the VMs model or you build your own?  Model virtual machines should have already installed staf and works.

  You cannot ping because the TCP library does not load.  You must be able to start with this TCP library STAF.  Looks like he can't solve the file server host name, make sure that the host name is defined in your file/etc/hosts with the IP address for your configuration.

• VMmark and benchmarking of Hyper-V and XEN

  Hello

  I am doing my final project headed higher and I need to know if VMmark can be used to compare virtual machines created by/on Hyper-V and XEN?

  Thanks in advance.

  Maksaraswat

  Hyper-V is unable to run VMmark due to its limited the SMP support.  Xen is expected to support the rules of racing of VMmark.  Try it and tell us what you see!

  Scott

  More information on my blog of the communities and on Twitter:

  http://communities.VMware.com/blogs/Drummonds

  http://Twitter.com/drummonds1974

• Installer won't work, indicating that a file may be missing. How to get the installer to run?

  I am running Windows & and downloaded CS6 Master Collection and when I try to run the config file, I get an error indicating that a file is maybe missing and to download and run a couple of potential fixes.  I did, but I have the same error of ge.  I tried only download Photoshop 6 and run this configuration file, but get the same result.  I run other non Adobe without any problem of product configuration files.  What can I do to get the installer to run?

  Move the files to your destop configuration and click "Run as Administrator".

  If this fails, you probably have a corrupt download and should re-download the Installer file.

  For more specific help, attach a screenshot of the error message.