services do not start after you run vmware-config - tools.pl

Similar Questions

• vCenter Server service does not start after you run Windows updates

  On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied.  The vCenter server is a datacenter 2008R2 VM.

  The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1.  I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:

  SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again.  CUSTOMER:: 1

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  Anyone encountered this before?

  Hello.

  I didn't know this, but the info in Ko 1007669 may be useful.

  Good luck!

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• Application service Coldfusion 10 does not start after you restart windows 8, up

  I saw that CF10 installer now supports windows8, then I reinstalled my computer and installed coldfusion 10. After installing, everything works perfectly and smoothly CF. After restarting the computer, however, the application server service will not start. I reinstalled CF twice with the same results. Here is the error in the event viewer:

  "The 10 ColdFusion application server service stopped with the following special service error:

  The operation completed successfully. »

  whether the error in the popup you get when you try and start it:

  "Windows failed to start the server in Coldfusion 10 applications on Local computer. For more information, rreview system event log. If it is a non-Microsoft service, contact the service provider and mention the 0 service-specific error code. »

  Any help would be appreciated. I wouldn't have to reinstall completely to Win7.

  OK... Thanks Piyush!

  I looked at the file and he had:

  application. Home = C: / ColdFusion10/MenuEase

  I think it was located from when I deployed my win7 backup. I have had cases set in place and the project I was working on called MenuEase. I changed it to:

  application. Home = C: / ColdFusion10/cfusion and it works now!

  Thanks for all the help

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• Windows Firewall service does not start after the removal of Virus

  Hello

  I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
  I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
  I also tried the troubleshooting of Windows Firewall that confusedly says:
  "Windows could not start the Windows Firewall... Not fixed
  "Set permissions for the registry keys involved"... succeeded
  "Windows Firewall service is not started. Not fixed
  "Starting the Firewall Service"... succeeded
  Any ideas would be most appreciated.
  Thank you.

  It seems that I solved the problem by running this:

  http://KB.ESET.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
  that I found in a post on this thread:
  http://social.technet.Microsoft.com/forums/Windows/en-us/5366225a-46e7-4D6C-A389-8bd18a5c3aad/Windows-Firewall-damaged-by-Windows-7-antivirus-2012?Forum=w7itprosecurity

• DHCP service does not start after change of vmnetdhcp.conf

  Hello

  My installation includes a host running windows 8.1 pro and guest is an Oracle Linux 6.5 with NAT. As I searched for a static IP address for the comments I went ahead and added the following to the end of vmnetdhcp.conf

  host computer2 {}

  Hardware ethernet 00: 0C: 28:D9:D5:95

  fixed address - 192.168.37.3

  }

  As soon as I try to restart the dhcp service falls down. Even if I just restart machine job changes, the DHCP service does not start. When I do a reset of the network through the network Publisher configuration and simply accept a dynamic allocation of IP address to things normal race comments. The same configuration works fine on Windows 7 Pro host. Any help would be appreciated.

  Hello

  Thank you for using our product.

  I tried the same set upward on Win7 and Win8.1 host, both of them work well.

  So I guess that there is a syntax error when setting up vmnetdhcp.conf.

  Maybe missing ';' at the end of each line?

  An example would be like this:

  host computer2 {}

  Hardware ethernet 00: 0C: 28:D9:D5:95;

  fixed-address 192.168.37.3;

  }

  Please check and try again with kindness.

  Thank you!

• HP Quick Launch HPWMISVC service does not start after the installation of new

  Hello

  I installed an SSD in my laptop as the C: drive, and I did a clean install of Windows 7 using an official ISO image, which eliminates the partition HP Recovery, sorry . I have installed sp54001 - HP Quick Launch, which is correct, but the HPWMISVC service will not start. My research, I found that the service is supposed to allow interaction with the desktop. However, this feature was supposed to be turned off in Vista because of security risks. Any thoughts? Thank you very much.

  HP Pavilion dv7-4285dx

  Product number: XZ029UA #ABA

  Windows 7 Home Premium 64-bit from the ISO image: X 17 - 58997.iso

  "If you made the wrong schema, so what wire did I just cut?"-Robert E. Tierney

  Hello

  I did more research and it seems that HP Quick Launch, it's not what I'm looking for. I was looking for visual feedback for volume changes by using the function keys. I opened the Windows Mobility Center and pressed the up/down volume function keys and the volume changes indeed. It's good enough for me. I thought that special software was necessary. Thank you very much.

• VMwareTools on error 3.11.10 - 100.fc18.x86_64 Linux while running vmware-config - tools.pl

  Implementation with a new VM FC18 on a host Windows 8 I can't get shared folders to work. After investigation, I noticed that vmware-config - tools.pl runs without error, except for the following:

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-Mmwoe6/vmhgfs-only.

  / bin/make /lib/modules/3.11.10-100.fc18.x86_64/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/kernels/3.11.10-100.fc18.x86_64'

  do: after you have entered a unknown directory

  make: * variable name empty.  Stop.

  do: leave a unknown directory

  make [1]: * [_module_/tmp/modconfig Mmwoe6/vmhgfs-only] error 2

  make [1]: leaving directory ' / usr/src/kernels/3.11.10-100.fc18.x86_64'

  make: * [vmhgfs.ko] error 2

  make: leaving directory ' / tmp/modconfig-Mmwoe6/vmhgfs-only.

  I checked the directory is valid as such:

  LS /usr/src/kernels/3.11.10-100.fc18.x86_64

  firmware crypto Arch include CPI core samples Makefile Module.symvers File System.map usr vmlinux.id security

  block pilots fs init Kconfig lib mm net scripts tools his virt

  I've been struggling with this for awhile and I really appreciate all or hunting for a solution. Thank you.

  To answer my own question; I had to reinstall my kernel-devel package to make it work:

  [promp] t # yum reinstall kernel-devel

  [quick] # cp /usr/src/kernels/3.7.2-201.fc18.x86_64/include/generated/uapi/linux/version.h /lib/modules/3.7.2-201.fc18.x86_64/build/include/linux/

  [quick] # /bin/vmware-config-tools.pl

  And now my shared folders work!

• ColdFusion service does not start after update 12

  Hello

  I'm running CF10 on Windows 2008 R2 server.

  Today I applied the update patch 12 to my server Coldfusion10 installation and now 10 Coldfusion Application Server does not start.

  After installation I ran configuration of the Web server, such as recommended. Now, when I start from server manager concole I get an error Windows cannot start Coldfusion 10 application server...

  When I start the Coldfusion Administrator I get page with:

  Service temporary unavailable!

  The server is temporarily unable to process your request due to downtime or maintenance capacity problems. Please try again later.

  Jakarta/ISAPI/isapi_redirector/1.2.32)

  I downloaded the patch directly from this http://helpx.adobe.com/coldfusion/kb/coldfusion-10-update-12.html page after update running administrator and download failed several times.

  I restarted the server box, but it did not help.

  Any ideas?

  Thank you

  CF10 reinstalled, now works

• Unable to start after you run the product recovery disc

  Hello

  My laptop was a dual boot with windows XP SP3 and ubuntu

  1. He was infected by the virus and when I tried to clean it I removed the wrong file "services.exe", whereas windows does not work good there

  2. when I tried to uninstall the windows update, I get the error following error: 1068: the dependency service or group could not start

  3. so today, I found the toshiba recovery disks, I run and it commpleted, but now am not able to start my laptop.

  4. when I try to re - install windiws xp I got the error below "couln can't find NTLDR.

  Guys, your help will be much appreciated

  Hello

  > I run and it filled, but now am unable to start my laptop

  Are you sure that installation completed successfully? Looks like the damaged MBR or cannot be attributed

• Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

  Help am stuck with it.

  Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

  Windows could not start because the following file is missing or corrupt:
  System32\drivers\isapnp.sys

  You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

  I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

  "File ntkrnlmp.exe could not be loaded.
  The error code is 4, sometimes it's 7.

  I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

  So any suggestions as to what wrong here

  Thank you very much

  I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

  [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

  Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

  Feedback would be much appreciated

• Tecra A9: Windows does not start after you turn off multiprocessor in BIOS

  I use a Toshiba Tecra A9 with a Core 2 duo. I need to change the bios setting to run a special program, "multiprocessor: disable. Now, I've changed back to the bios setting "multiprocessor: activate ' and win xp stop start after login. With "multiprocessors: Disable" the computer starts normally. If I press F8 after starting the computer and select save mode, the computer starts.
  I don't have any idea what I can do to solve this problem.
  Any ideas?
  Thanks in advance.
  Ulli

  Maybe the ACPI-Multi CPU driver was not installed correctly or a MS patch is necessary.
  I read on some similar topic websites.
  It is very important that the XP SP2 has been installed and other patches.

  At this time the new Win XP SP3 is available. I think that this is a beta version, but I already installed it on my XP OS.

  So maybe you should enable the multiprocessor option in the BIOS then you need to install the XP again. Then install all available Ms patches, fixes and eventually the SP3 too.

  Then check again.

  One question; Are you using the newest BIOS?